Foreign trade import/export data is getting copied when creating MMR

Hi,
When trying to create material master record with reference material ,the" Foreign trade import/export data " is not available in selection but the material is getting created with the "foreign data".
When to restrict so that the material master record gets created without "foreign trade data"
Thank you.

HI,
When u enter the new material,matl type & industry u enter the reference material and press enter then it shows the select views screen in this deselect the foreign trade tab and press enter then create material.The foreign data tab will not be copied in the new material.
murugan

Similar Messages

  • Foreign Trade Import/Export Tab in Material Master of SAP R/3

    Hi
    What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3

    Hi Akhil ..
    Sounds like you need to enrol for the SAP Foreign Trade training course!
    The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin.  Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
    Some, but not all, of the fields in that tab become redundant if GTS is in use.
    If you have more specific questions in this area, it might be easier to give better explanations.
    Regards,
    Dave

  • Error in Excise Data subscreen in Material Master:Foreign Trade-Import Data

    SAP Net Weaver ECC6.0
    I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
    There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
    "Record 21 MORE does not exist in table T133E
    Message no. M3748"
    and
    "Record 21 J1PR does not exist in table T133E
    Message no. M3748"
    Kindly help what to do

    OK
    Lets starts from first step.
    Go to OMT3B
    1.  Copy 21 and make it 91
    2. Then from left hand side select Data screens no 15 copy it and make it 91 - Z1
    3. Then again go to left hand side   Subscreens and copy 6 and make it 91 - 71 - z and assign screen no 2205 and add prograne as SAPLJ1I_MATERIAL_MASTER
    save it
    Then go to OMBt3E and copy 01 -* HERS * 12 and mahe it 01 -* ROHor FERT * 91 and save it and then check and revert back
    regards

  • Foreign trade:export and foreign trade:import

    hi
      i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:import views in material master record.
    Ex       
    scenario:- if i am importing a material from india and export the same to china.
    Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM
    Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM

    the material that you import from india to export to China will not change its origin during this transition.
    It the origin is India, it is still India even you export it from Singapur to China.
    If you import this material from several sources and each has a different country of origin, then you can manage this only with batches, as you can maintain the CoO in the batch.

  • Has anyone had issues with Administration\Data Import/Export\Data Import???

    Has anyone had issues with Administration\Data Import/Export\Data Import???
    I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly  using this standard function to import supplier prices to their master price list, but now it has failed?
    I have looked at the file they are importing and it appears to be fine.
    On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
    The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
    Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
    In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
    Has anyone any ideas or is aware of performance issues like this?
    Thanks,
    Ian

    Always an option, but would you give your clients access to this tool?
    Not sure really.
    I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
    I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
    Kind regards,
    Ian

  • How to import/export data in pl/sql developer

    how to import/export data,table script in pl/sql developer.
    By using the export functionality i am getting the dump file.I want a sql file.How do i do it?
    And i want the data in csv file and table script in a sep sql file.How do i do it?

    <li>run your query in "Query Builder"
    <li>Right-Click on the Query-Results
    <li>Click "Export"
    <li>Click on the "Drop-Down" in front of "Format" and choose "insert"
    <li>Provide the location and name of ther "sql" file.
    If you want output in CSV format, choose "csv" from the "format" drop-down.
    HTH

  • Control Code field in Material master- Foreign Trade imports tab

    Hello Experts,
    I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
    Please help..
    Manish

    Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
    may be comes in a sale order.
    Regards

  • Foreign trade and customs data should be picked automatically in delivery

    Dear All,
    Foreign trade and customs data should be picked automatically in delivery note and in the invoice  once we enter it in the master data for L/C Local Sales for example country  Saudi arabia to Saudi Arabia in vi95 or any other transaction you have for this particular master data entry.please help

    Check the customizing settings under
    IMG - SD - Foreign Trade/Customs - Basic Data for Foreign Trade -  Define Business Transaction Types And Default Value
    And the data should be picked up from Material Master record in Foreign trade export view.
    They are checked as mandatory fields according to customizing under:
    IMG - SD - Foreign Trade/Customs - Control Foreign Trade Data in MM and SD Documents - Incompleteness Schemas for Foreign Trade Data
    Also, refer following link:
    [Customizing Foreign Trade Master Data |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=ERPLO&title=CustomizingForeignTradeMasterData&decorator=printable]
    Thanks & Regards
    JP

  • Foreign Tade: Import, Export & Control

    Hi Experts,
    Can any one please input me the step by step IMG settings for Foreign trade Import & Control.
    Thanks in Advance, Suresh

    Hi,
    Refer
    http://help.sap.com/saphelp_47x200/helpdata/en/93/74440d546011d1a7020000e829fd11/frameset.htm
    Go to SPRO > MM > Purchasing > Foreign Trade/Customs > Control Foreign Trade Data in MM and SD Documents
    Incompleteness Schemas for Foreign Trade Data (VI29)
    Here you can define Incompleteness procedures and include fields which you want and keep field control as "3" i.e. Required field - Incompletion check active
    Foreign Trade Data in MM and SD Documents (VI49)
    Here you can assign the incompleteness procedure to Country Key.
    Import Screens In Purchasing Document
    Here for your Company Code, keep Import Data as "1" i.e. Call up import data screens for every import or "3" i.e. Always call up import data screen
    Check in ME21N.
    Thanks & Regards,
    Kiran

  • Import/export data from ms sql 7 to xml file in a particular xpdl format

    I'm trying to write java program to import/export data from ms sql 7 to xml file in a particular xpdl format. Can anyone suggest how to do it?

    take a glance at what these guys do: http://www.openbusinessengine.org/docs/guide.html

  • What gets copied when you copy a warehouse?

    Hi
            We are debating whether to copy one of our existing warehouses or the SAP standard for our new warehouse setup.
    Does someone know what are the things that get copied when you copy a warehouse ?  (eg storage types , Storage locations etc.... ) Would any customized transactions that we have in our existing warehouse be copied ( eg: customized RF transactions etc)
    Please advise.
    Thanks

    Hi,
      It copies only standard warehouse structure. It will not copy customized ones.
    Thanks,
    DV

  • Tables get affected when creating idoc

    hi,
            Tell me the tables get affected when creating idoc, for example in which
            table idoc error logs get stored etc

    Hi,
    EDIDS - stores the Status of the IDOcs..There you can find the message type, message number and message id
    EDID4 - where the idoc data is stored
    EDIDC - where the control record for the idoc is stored
    Thanks
    Naren

  • Foreign trade inport /export in  vl01n

    How to remove FOREIGN TRADE/ EXPOR- IMPOT in delivery in vl01n.
    How to deactivate it.

    Hi,
    If u want to deactivate this Foreign trade settings permanently the do settins as follows
    1.IMG-SD-Foreign Trade/Customs-Control Foreign Trade Data in MM and SD Documents-Incompleteness Schemas for Foreign Trade Data (VI29)
    Here create ur own incomplete schemas for Header and Item by copying the existing std Incom.procedure..
    2.IMG-SD-Foreign Trade/Customs-Control Foreign Trade Data in MM and SD Documents-Foreign Trade Data in MM and SD Documents (VI49)
    here maintain the New entries for India and double cilk on it maintain the entries as follws
    Export/Import-2
    Assing ur Incom.schemas for header and item level, here u can select the control on documents
    Error msg, Warnong msg or No check during doc.processing
    this will suffice ur requirement
    Reg
    JJ
    Edited by: Jagsap on Jul 24, 2009 9:00 AM

  • Foreign Trade _ Export License Number for SED or SLI

    We are not using full blown Foreign Trade.  I just recently set up ECCN codes to be used on the above forms for exporting.  Now I am being asked to have a way to store Export License Numbers (it is item 22 on the SED) . . . They are asking it be stored on the material.  Any ideas?

    thanks Alex Zheng  for your answer but i did not get you
    when i define a license type in VE51  -> no material number attribute exists
    please clarify
    thanks in advance

  • Importing/Exporting data from Microsoft Access

    Hello to everybody!
    I have to create a management software (client-server).
    CLIENT SIDE: ClientS insert data into forms and these data are stored into a database Access (client database). Every month clients send to the server some of the data stored (data of the month!).
    SERVER SIDE: "Server man" receive from clients those data by email end need to store them into the main server database.
    Note: Data to be send have not a big dimension and, naturally, clients and server databases are identical (same structure)!
    My questions are:
    1) What is the best way to export data from database access to a file? (I imagine I need to use .XML file). Do I need to use particular package or software??
    2) What is the best way to import data from a file (maybe .XML) into a database access (of server)?? Do I need to use particular package or software??
    This is my first software of this kind.
    Please HELP ME!
    Thanks in advance, Liuk.

    1) What is the best way to export data from database
    access to a file?That depends on many things.
    (I imagine I need to use .XML
    file). NO! That's not what XML is for
    Do I need to use particular package or
    software??Again, that depends on a lot of things.
    2) What is the best way to import data from a file
    (maybe .XML) into a database access (of server)?? Do
    I need to use particular package or software??Look at Java IO packages for reading data from files. Then look at JDBC for writing data to databases. Avoid XML, you don't need it.

Maybe you are looking for

  • TS3999 Some calendars are not shown in iCloud

    I use some other calendars (birthday, holidays, etc.) which are shown on my iPhone, but I can not see in iCloud Calendar. Do someone know what is the problem? Thanks!

  • Compressor and dissolves -- a definitive answer?

    I've been reading through many online forums, and although I see this problem posted often, I have yet to read a well-informed answer. Most of the solutions are based on guesswork or contradictory answers. To begin with, I am using FCP 4.5, OS X 3.9,

  • Adobe Premiere Elements 8 is low on system memory.  XP

    Hi, I am running Adobe Premiere 8 on Windows XP 32 bit and I keep running into an error message that says Elements 8 is low on system memory.  Usually shortly after the program crashes and closes.  I've done some searching and the only fix I have fou

  • SLD Data Supplier Bridge

    I am not able to start SLD Data Supplier Bridge. Any help appreciated.

  • REP-56048 with PDF Subsetting

    Hi everyone, I'm having a problem with Reports 9i (IAS 9.0.2.1) when i use PDF Subsetting. The following message appears: REP-56048: Engine reEng-0 crashed What can I do to solve this?? My uifont.ali is configured like this: #========================