Forever flashing amber - not working anymore

I have a cat-5 running from my DSL modem into the time machine, then back out to my iMac. While the internet connection seems fine, time machine no longer works (isn't backing up) and isn't "findable" wirelessly by my laptop.
It used to work fine... don't know where to go next.

I think that you might be confused between the Time Capsule, which is a network backup device, and Time Machine, which is the backup software part of OS X.
You might want to try resetting your Time Capsule.

Similar Messages

  • My flash is not working anymore

    My flash is not working anymore. Could this be a softwaer problem after upgrading to the newest os (4.3.3), or is the led broken?
    Its neither working with camera, videocamera or flashlight-apps.

    This is normally a hardware issue. You should contact Apple and discuss what options you have. As one last effort, you could attempt to Restore the iPhone and set it up as a new device. If the problem continues after doing this, then it is most likely a hardware issue.
    - Greg

  • Flash Preloader not working anymore

    The final and most crucial part to completing a project I
    have is the preloader. When I first developed this, the preloader
    worked fine. a 1.7MB file later, it shows a blank screen, and then
    the preloader shows 100% and the page loads.
    I was given advice to have the movie clips not be exported to
    the first frame, but have them elsewhere in the movie. Problem with
    that is that they stop working if I do that.
    Anyway, here's my code. Hopefully someone can figure out why
    it's not appearing while it loads!
    stop();
    loadingBar._yscale = 1;
    var loadingCall:Number = setInterval(preloadSite, 50);
    function preloadSite():Void {
    var siteLoaded:Number = _root.getBytesLoaded();
    var siteTotal:Number = _root.getBytesTotal();
    var percentage:Number = Math.round(siteLoaded/siteTotal*100);
    loadingBottle._yscale = percentage;
    percentClip.percentDisplay.text = percentage + "%";
    percentClip._y = loadingBottle._y + loadingBottle._height;
    bytesDisplay.text = "loaded " + siteLoaded + " of " +
    siteTotal + " bytes";
    if (siteLoaded >= siteTotal) {
    clearInterval(loadingCall);
    _root.gotoAndPlay("Movie", 1);
    }

    This is normally a hardware issue. You should contact Apple and discuss what options you have. As one last effort, you could attempt to Restore the iPhone and set it up as a new device. If the problem continues after doing this, then it is most likely a hardware issue.
    - Greg

  • Dailymotion embedded flash movie not working anymore

    I cannot seem to get Dailymotion embedded flash movies working. The movie is just a black screen. The same embedded movie on the same webpage works in windows. (Non-embedded) movies on the official Dailymotion site still works though.
    This happened only recently. I thought maybe it was a flash 10 issue, but after rolling back to flashplugin 9, the problem still remains.
    Does anyone has the same problem?

    Usually when a browser has an issue playing a Flash file it is due to the embedding code that is used in the html page.  Can you compare your code to another page's code to see what differences there are?  You should let Flash generate the embedding code rather than using some other software to do it if that is what you did.  Just have Flash publkish and html page, test that page in your various browsers, and if it works, copy/paste that code in place of what you have now.

  • Trying to update iPhoto for iPad but it lasts forever and iPhoto is not working anymore, Trying to update iPhoto for iPad but it lasts forever and iPhoto is not working anymore

    When running the updates of my Apps for iPad, I got stuck and relaized that iPhoto was not working anymore. The update could not be loaded and whe I try to open it from the AppStore page it lasts forever. What should I do?

    Make sure you have some available stoarge space on your iPad. Looks like you may be running low.

  • After ugrade of my 2007 MacBook to OS X 10.6.8 my printers do not work anymore. Details see below any idea to solve issue? Thx Stefan

    After ugrade of my 2007 MacBook to OS X 10.6.8 my printers do not work anymore, error code: "cgdpdftoraster: cupsRasterInterpretPPD had an error: unknown operator "Statusdict"!". Any idea how to solve this issue? Thx Stefan

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • Muse not working anymore

    Hello, Alex here
    since the last update Adobe Muse is not working anymore for me. The sites open normally but then the Master Pages don't load properly and it freezes all the time.
    Does it ring a bell for someone?
    Thanks a lot in advance.
    Alex

    Hi Alex,
    Could you please let me know,
    1. What is the size of your .muse file?
    2 Try to duplicate the .muse file, open it, and try to reduce child pages, and see if you get some improvement.
    3. Do you have asset on Network drive, if yes, add these asset to local drive and then use them, see if that helps.
    4. Are you using Mac/Windows?
    Please let me know these details, and I will try to investigate.

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • Satellite U400 - the webcam does not work anymore

    Hello guys here is my sudden probloema!
    About a year ago I purchased a laptop
    TOSHIBA - Satellite U400
    with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
    For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
    As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
    I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
    the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
    Gan you help me?
    Graziee

    Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
    At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
    Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

  • TouchPad lock key does not work anymore on Dell XPS L401X

    Hi everyone,
    On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
    Any hint to fix this problem?
    Many thanks!
    Tinh

    Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
    I'm sorry i can't help more.

  • TV does not work anymore on Qosmio G10

    Good morning,
    TV does not work anymore, may be due to an update. It has been working OK before.
    When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
    -Intervideo WinDVD creator is installed.
    -TV PCI tuner seems to work properly (as per hardware status)
    Which files can be missing? What needs to be done?
    Any help, suggestions, well appreciated.
    Thank you to anyone answering this message.

    Hello Luciano
    Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
    Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
    Try it at first.

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • DVI port not working anymore after latest BIOS update on T410s

    Hi all,
    after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
    Thanks and cheers!

    Do you mean the DVI port on the docking station?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for