Forget router user and password

Dear All,
I forget my CISCO1921-SEC/K9 and cisco 1941 routers user and password. So I want to reset my router. I have tried by following method, but did not success. Every time ask user name and password for User Access Verification. Pls. help me.
Method1:
I am tried to factory reset by press reset button. Did not work
Method2:
1) Connect via console to the device
2) Power on the device
3) Hit ctrl+break until you are in rommon mode
Type confreg 0x2142 at the rommon 1> prompt in order to boot from Flash.
This step bypasses the startup configuration where the passwords are stored.
Type reset at the rommon 2> prompt.
The router reboots, but ignores the saved configuration.
Type no after each setup question, or press Ctrl-C in order to skip the initial setup procedure.
Type enable at the Router> prompt.
You are in enable mode and should see the Router# prompt.
Thanks,
Qamrul

thank you for provide link.
i tried but failed. now i need to try by following method. but i don't know how can i remove flash from router and what is step?
If unable to break into ROMMON mode, perform these steps:
Remove flash.
Reload the router. Router will end up in ROMMON mode.
Insert flash.
Perform standard procedure for password recovery.
http://www.cisco.com/c/en/us/support/docs/routers/3800-series-integrated-services-routers/112058-c1900-pwd-rec-00.html

Similar Messages

Can't activate ipad which we forget the user and password

can't activate ipad which we forget the user and password
what i need to activat it please

Strange that you all (we) cannot remember user and password.
Got any reason why?

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

It is asking for a router name and password???

The sales person told me how easy this would be to set up..."just plug it in" he said...right. Anyhoo - I disconnected my ancient wireless router and put the cd in - started doing its thing and then it asks for a router name and password...the only name and password I have is from my old ancient router...how could it be the same? Where do I find this info? Thank you for any help!

Just go to the Linksys support site, find your router model and hardware version there, and download the User Guide or User Manual for your router, and there's all kinds of useful information there. I'm surprised that there isn't a "Quick Start" guide in with the router that gives basic instructions like go to 192.168.1.1 and then how to login to set up your router. But it is in the downloaded user manual for sure.

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

I am trying to connect to tyne internet and computer requires my user and password in which i do not remember

i am trying to connect to tyne internet and computer requires my user and password in which i do not remember

I'm guessing that you are referring to Tyne Internet in the UK? Are you forgetting your Tyne username and passcode, or one for the computer? To recover the Tyne, you will need to contact them. If it is your Mac, from what little I understand about Mac computers, do you have it in your Keychain?

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

External Web Service - User and password in HTTP header

Hi!
How is it possible to add user and password in the HTTP header in a external web service call?
I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio. I following the Java Development Guide - Web Service Security, and use the secured service connection. I have also created a new System Landscape, but should the new system be based on HTTP, my own PAR or what?
How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
Cheers
Asle

Hello All,
I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
Sorry for the long post. Hope someone can help. Thanks.

WebService in XI with user and password

Hello,
I´ve created a webservice in XI. When I call this webservice without user and password from an external tool (soapUI 1.7.5), the following error appears:
+Logon Error Message
Der Aufruf der URL http:... wurde aufgrund fehlerhafter Anmeldedaten abgebrochen.+
(means: the call failed because of missing authorization)
Ok, but where can I implement the user and passwort, that this webservice can be called automatically from an other application?
Thanks for your assistence.
Kind regards
Martin

Hi Huber,
but where can I implement the user and passwort, that this webservice can be called automatically from an other application?
open the WSDL ....and in the left side (bottom) u can see option of user name and password...but i guess its not possible to login automaticaly.
u have to provide the username and password evrytime....
regards
biplab

User and Password for JMS-Adapter

Hi all,
when configuring JMS-Adapter e.g. for IBM MQSeries i do not find field where to specify the user and password for the MQ. We configure e.g. a receiver communication channel.
In 2.0 JMS-Adapter we can put user and password like this
JMS.QueueConnectionFactoryImpl.user=YTEST
JMS.QueueConnectionFactoryImpl.password=<!%YTEST%!>
in the property file. We can also hide the passwort with
the mechanism of password token.
How can this be done in JMS 3.0 Adpater? Is it possible?
Thanks,
Ly-Na Phu

Oh, sorry. Now i see the field for user and passwort.
Thanks,
Ly-Na Phu

Link to folder with user and password

Hi all!
From my action I want to redirect to a file in order to download it but the problem is that this file is in a web folder with user/password
How can I redirect to it to downlad it directly without introducing user and password manually by the customer?
Thanks!
T

Do you understand where this user/password restriction comes from? It look like just a HTTP based authentication. A Servlet can access the local file system directly without issueing a new HTTP request for that. Or is that file located at another server?

Problem in getting Portal Mapped user and password in Web Dynpro iView

I am developing a webdynpro iview.My app need to read mapped user and password form a system in Portal runtime.
I used the following codes in my Web Dynpro java program:
     IWDClientUser user = WDClientUser.getCurrentUser();
     IUser iuser = user.getSAPUser();
     IUserMappingService iums = (IUserMappingService)WDPortalUtils.getServiceReference(IUserMappingService.KEY );
//     IUserMappingService iums = (IUserMappingService)
//     PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
     IUserMappingData iumd = iums.getMappingData (systemalias, iuser);
     Map map = new HashMap ();
     iumd.enrich(map);
     String userid = (String)map.get( "user" );
     String pwd = (String)map.get ("mappedpassword");
I've add a sharing references in project properties,the value is "PORTAL:sap.com/com.sapportals.portal.prt.service.usermapping.IUserMappingService"
But when I run the iview on my Portal, it goes wrong, the message is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/HomePage'' for startup. Reason= Clusterwide exception: Failed to start dependent library ''com.sapportals.portal.prt.service.usermapping.IUserMappingService'' of application ''local/HomePage''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
    at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:184)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:117)
Anybody can help me?And are there anyother methods can get mapped user and password of Portal systems in Web Dynpro JAVA.

Hi Wayne,
      Did you added com.sap.security.api.jar to your webdynpro project. if not follow this steps.
1. Right-click the project in Eclipse or SAP NetWeaver Developer Studio.
2. Select Properties.
3. Choose Java build path -> Libraries -> Add Variable -> Select variable WD_RUNTIME -> Extend -> com.sap.security -> lib -> com.sap.security.api.jar.
I hope this should solve your problem.
Regards, Suresh KB

UCM Administration Applets request the user and password confirmation

I want to ask if someone has experienced in the UCM Administration Applets, that request the user and password confirmation for each time the applets are executed,
Is there any configuration in the UCM that activates this behavior?
I’m trying to reproduce this behavior in the development environment but with not much success
The UCM version is 10.350
Thanks for your support.

Is there any configuration in the UCM that activates this behaviorNo. It's more likely that you are accessing the applets via a URL that does not match the one you originally used to log in to the Content Server.
For example, you logged into "http://myserver/cs" or "http://<ip address>/cs". However, your HttpServerAddress variable is defined in Content Server as "http://myserver.mydomain.com". (Any absolute links to the applets use the variable to build the URL.) The browser "thinks" this is a new domain, and doesn't forward credentials to the different address. So the applet must prompt again for credentials. (Are you using a load balancer by chance? Does your HttpServerAddress variable in Content Server match the DNS entry being used for the load balancer?)
I've also seen some versions of the Sun client JRE do this by design as a security "feature". If you using IE, make sure your server address is in the "trusted" or "intranet" security zone.

Reset the user and password in the config tool

Dear All,
how can I reset the user and password in the config tool ?
Regards
ertas

how can I reset the user and password in the config tool ?
Section from help:
http://help.sap.com/saphelp_nw70/helpdata/en/1c/129d440bbe4b7d8ae8b82879808d7e/content.htm
Section from SDN Wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/to%252breset%252badministrator%252bpassword%252bthrough%252bconfig%252btool
Regards,
Abhishek.

URL in sender SOAP channel with user and password

Hi Expert,
I have developed SOAP to proxy scenario.The serder WSDL is generated by using sender agreement. In the WSDL we are using default below URL.
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
But the client requirement is that he want SAP user and password also in above url.
Is this possible in sender SOAP channel?
Any body can please help me for above issue?
Thanks.
Edited by: darshana-PI on Feb 1, 2012 5:26 PM

Thanks prateek,
we have used HTTP plain adapter for this and used below link to call that interface in PI. And its working.
http://server:port/sap/xi/adapter_plain?service=<xxx>&namespace=<xxx>&interface=<xxx>&sap-user=<xxx>&sap-password=<xxx>&qos=BE
I can understand the security related problem, but that was the requirement for end application.
Thanks,
Darshana.

Forget router user and password

Similar Messages

Maybe you are looking for