Forgive me, my R key doesn't starts recording, and it matters a lot

I play and I record.
I need to press R very quick and play my guitar
but the key stop starting record.
Any other solutions other than reboot it?
It occurs quite frequent due to my history.
100 thanks

Try the oddball fix
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs

Similar Messages

  • I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    QuickTime version 10 can only record the entire screen.
    10.1, 10.2 and 10.3 offer part of the screen recording.

  • My home key doesn't work well, and my warranty has been expired. what can I do?

    my home key doesn't work well, and my warranty has been expired. I have to press very hard to light the screen.

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    -You can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Holding down the "D" key doesn't start the Apple Hardware Test when booting

    Subject says it all. I have the original CD that came with my Macbook 13" (mid-2007). When I startup and hold the "D" key, the computer just boots like normal to the internal hard drive. Any ideas?

    Yes, I did set a firmware password. But how would I go about booting to the AHT with that? I tried to boot from the DVD (after entering the firmware password) and then holding down D, but that did not work either.
    In absence of a good way of doing this, what are some good freeware utilities to test RAM?

  • Since update to version 4.3.3 mail doesn't start up and doesn't work

    Hi
    Since I updated my Iphone 4 to the software version 4.3.3, Mail doesn't work out good anymore.
    It is the only thing which doesn't work. All other App's are good.
    Mail hang's up if you start it.
    If it starts sometimes, it says for example: 4 mails received, but nothing shows up ...
    Probably somebody else has such problems
    Help would be very nice
    thanks
    regards
    Patrick

    I have the same problem on an iPhone 4 with 4.3.5 update.

  • OSx 10.3 doesn't start up and I have a CD inside...

    I can't insert the software CD restore 'cause I have a cd inside the computer and I can't remove it! With my iBook I always could remove any CD (if there was a problem) inserting a clip, but with the powerbook??? how could I remove the CD??? thankx!
    powerbookg4   Mac OS X (10.3.4)  

    I found it myself... :
    press the power on and at the moment you hear the starting sound, press F12 for a while, the computer will eject the CD...

  • Sometimes Xorg doesn't start

    I sometimes have a problem when i turn on my computer and Xorg doesn't start properly and all i see is a dark screen. Before starting Xorg everything works fine, but when i do startx there is only blackness and i have to reboot. When i was going through the logs i found errors like
    localhost kernel: [  381.110335] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 95
    localhost kernel: [  381.110338] Raw EDID:
    localhost kernel: [  381.110340]      00 ff ff ff ff ff ff 00 32 0c 01 1f 00 00 00 00
    localhost kernel: [  381.110342]      00 19 01 03 f8 3f 1f 7c 0a 19 45 97 58 53 8b 28
    localhost kernel: [  381.110345]      24 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
    localhost kernel: [  381.110347]      01 01 01 01 01 01 5e 33 90 70 61 1a 14 40 40 7f
    localhost kernel: [  381.110349]      67 00 7f ff 18 00 00 19 00 00 00 00 00 00 00 00
    localhost kernel: [  381.110351]      00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 4c
    localhost kernel: [  381.110354]      47 50 68 69 6c 69 70 73 4c 43 44 0a 00 00 00 fe
    localhost kernel: [  381.110356]      00 4c 50 31 35 34 57 45 32 2d 54 4c 41 34 00 23
    localhost kernel: [  381.110363] nouveau 0000:01:00.0: LVDS-1: EDID block 0 invalid.
    localhost kernel: [  381.110366] [drm] nouveau 0000:01:00.0: DDC responded, but no EDID for LVDS-1
    As you can see i use nouveau driver. The problem seems to be that display does not give a correct EDID to the nouveau and Xorg doesn't start. I have a hp laptop and i have had problems with its display for some time now (it sometimes blinks uncontrollably in various geometrical patterns, but when i move the angle for a bit it stops - this is a known issue with hp laptops and i don't have the money for a new display). Is my hunch about the reason of this issue correct or are these errors unrelated and how would i resolve this? Would it be possible to tell the system what is the correct EDID - i only use one display.

    There used to be an Option in the Device section of xorg.conf that you could set,
    Option "IgnoreEDID" "TRUE". You could try creating a file in /etc/X11/xorg.conf.d/
    with that option. The downside to that is that you might have to provide all the correct
    EDID info yourself.
    The nvidia proprietary driver's configuration allows you to ignore all or part of the EDID:
    if you wish to disable the driver's use of the EDID, you can set this option to False:
            Option "UseEDID" "FALSE"
        Note that, rather than globally disable all uses of the EDID, you can
        individually disable each particular use of the EDID; e.g.,
            Option "UseEDIDFreqs" "FALSE"
            Option "UseEDIDDpi" "FALSE"
            Option "ModeValidation" "NoEdidModes"
    /usr/share/doc/nvidia/README
    If you're feeling adventurous there is a utility to read/write EDIDs: https://github.com/bulletmark/edid-rw
    but do note the WARNING there.

  • Opmn services doesn't start on Apps tier

    Hi All,
    We have issue in starting apps tier services via adstrtal.sh. It doesn't start anything other than listener and rest all opmn process timed out.
    In the server I can see only
    "opmn -a -q ping"
    and
    sh <path>/opmnct
    sh <path>/adapcctl.sh
    etc, but it doesn't start anything and even doesn't reach the stage where it writes in log file. No actually no log present. Its a new server and clone went well, no issues faced. But not sure what is the issue here and why it is not starting anything. I increased the time out value from 600 to 1800 in opmn.xml file for all components but no help. It keep on waiting and time out.
    Server side I did check ping localhost DNS entries in /etc/resolv.conf. But everything works well.
    Any clue ?

    Sundeep,
    Please mention your application release along with the database version and OS.
    Was this working before? If yes, any changes have been done recently?
    Can you find any details about the error in the opmnctl.sh script log file?
    Please run AutoConfig and make sure it completes successfully.
    Thanks,
    Hussein

  • My zen creative 4GB doesn't start up.

    My zen creative doesn't start up and my laptop don't recognise him either. What can I do? Reset don't help etc. When I put him on the USB ,the screen goes very quick on and off. Thats the only sign he gives.

    The first ting that I saw when I reset my Zen was that the screen stopt to go on and off when I pushed on the resetbutton. After that the screen went on and of again very fast!
    I'm sorry if I didn't get what your saying. So you mean to say that the screen turns on when you press the reset but will turn off immediately? Will it show the Creative logo? Leave your player connected to the computer for at least 4 hours and try turning it on. Make sure the laptop is not on a hybernate mode.

  • My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    If your MBP is under warranty, bring it to an Apple store and have the technicians fix it.  If not, try the steps in this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key

    My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key.
    When start up I land into the Mac OSX Installer. Has my LION crashed or the HD is not responding?

    Try booting while holding down the Option key but make sure there aren't any disks in the optical drive first.
    I just found this:
    Select a startup disk *(on some computers)*
    Option (To open the optical drive when choosing a startup disk, press ⌘-period.)
    here. http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_strtup.html
    Carolyn

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

  • [SOLVED] Xorg doesn't start after upgrade to 1.17.1

    Archlinux i686
    Intel Core 2 Duo 6600
    01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
    After following upgrades:
    [2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
    [2015-02-26 03:27] [ALPM] transaction started
    [2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
    [2015-02-26 03:28] [ALPM] transaction completed
    [2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
    [2015-02-26 03:29] [ALPM] transaction started
    [2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
    [2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
    [2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
    Xorg doesn't start after reboot and I found following kernel message:
    kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
    and /var/log/Xorg.0.log looks like this:
    [ 5.591]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 5.591] X Protocol Version 11, Revision 0
    [ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
    [ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
    [ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
    [ 5.591] Build Date: 22 February 2015 12:52:47PM
    [ 5.591]
    [ 5.592] Current version of pixman: 0.32.6
    [ 5.592] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
    [ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 5.598] (==) ServerLayout "ServerLayout0"
    [ 5.598] (==) No screen section available. Using defaults.
    [ 5.598] (**) |-->Screen "Default Screen Section" (0)
    [ 5.598] (**) | |-->Monitor "<default monitor>"
    [ 5.599] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 5.599] (**) | |-->Device "Device0"
    [ 5.599] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 5.599] (**) Option "BlankTime" "0"
    [ 5.599] (**) Option "StandbyTime" "0"
    [ 5.599] (**) Option "SuspendTime" "0"
    [ 5.599] (**) Option "OffTime" "0"
    [ 5.599] (==) Automatically adding devices
    [ 5.599] (==) Automatically enabling devices
    [ 5.599] (==) Automatically adding GPU devices
    [ 5.608] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 5.608] (**) Extension "Composite" is disabled
    [ 5.608] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 5.608] (II) Loader magic: 0x829e700
    [ 5.608] (II) Module ABI versions:
    [ 5.608] X.Org ANSI C Emulation: 0.4
    [ 5.608] X.Org Video Driver: 19.0
    [ 5.608] X.Org XInput driver : 21.0
    [ 5.608] X.Org Server Extension : 9.0
    [ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
    [ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
    [ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5.613] (II) LoadModule: "glx"
    [ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 5.632] (II) Module glx: vendor="X.Org Foundation"
    [ 5.632] compiled for 1.17.1, module version = 1.0.0
    [ 5.632] ABI class: X.Org Server Extension, version 9.0
    [ 5.632] (==) AIGLX enabled
    [ 5.632] (==) Matched nouveau as autoconfigured driver 0
    [ 5.632] (==) Matched nv as autoconfigured driver 1
    [ 5.632] (==) Matched nouveau as autoconfigured driver 2
    [ 5.632] (==) Matched nv as autoconfigured driver 3
    [ 5.632] (==) Matched modesetting as autoconfigured driver 4
    [ 5.632] (==) Matched fbdev as autoconfigured driver 5
    [ 5.632] (==) Matched vesa as autoconfigured driver 6
    [ 5.632] (==) Assigned the driver to the xf86ConfigLayout
    [ 5.632] (II) LoadModule: "nouveau"
    [ 5.632] (WW) Warning, couldn't open module nouveau
    [ 5.632] (II) UnloadModule: "nouveau"
    [ 5.632] (II) Unloading nouveau
    [ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "nv"
    [ 5.633] (WW) Warning, couldn't open module nv
    [ 5.633] (II) UnloadModule: "nv"
    [ 5.633] (II) Unloading nv
    [ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "modesetting"
    [ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
    [ 5.634] compiled for 1.17.1, module version = 1.17.1
    [ 5.634] Module class: X.Org Video Driver
    [ 5.634] ABI class: X.Org Video Driver, version 19.0
    [ 5.634] (II) LoadModule: "fbdev"
    [ 5.634] (WW) Warning, couldn't open module fbdev
    [ 5.634] (II) UnloadModule: "fbdev"
    [ 5.634] (II) Unloading fbdev
    [ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 5.634] (II) LoadModule: "vesa"
    [ 5.634] (WW) Warning, couldn't open module vesa
    [ 5.634] (II) UnloadModule: "vesa"
    [ 5.634] (II) Unloading vesa
    [ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 5.634] (++) using VT number 7
    [ 5.635] (II) modeset(0): using drv /dev/dri/card0
    [ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [ 5.636] (==) modeset(0): RGB weight 888
    [ 5.636] (==) modeset(0): Default visual is TrueColor
    [ 5.636] (II) Loading sub module "glamoregl"
    [ 5.636] (II) LoadModule: "glamoregl"
    [ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 5.647] compiled for 1.17.1, module version = 1.0.0
    [ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
    [ 5.772] (II) glamor: EGL version 1.4 (DRI2):
    [ 5.786] (II) modeset(0): glamor initialized
    [ 5.786] (II) Loading sub module "dri2"
    [ 5.786] (II) LoadModule: "dri2"
    [ 5.786] (II) Module "dri2" already built-in
    [ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
    [ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
    [ 5.950] (II) modeset(0): Output TV-0 has no monitor section
    [ 6.006] (II) modeset(0): EDID for output DVI-0
    [ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
    [ 6.006] (II) modeset(0): Year: 2011 Week: 8
    [ 6.006] (II) modeset(0): EDID Version: 1.3
    [ 6.006] (II) modeset(0): Digital Display Input
    [ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 6.006] (II) modeset(0): Gamma: 2.20
    [ 6.006] (II) modeset(0): DPMS capabilities: Off
    [ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 6.006] (II) modeset(0): First detailed timing is preferred mode
    [ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 6.006] (II) modeset(0): Supported established timings:
    [ 6.006] (II) modeset(0): 720x400@70Hz
    [ 6.006] (II) modeset(0): 640x480@60Hz
    [ 6.006] (II) modeset(0): 640x480@67Hz
    [ 6.006] (II) modeset(0): 640x480@72Hz
    [ 6.006] (II) modeset(0): 640x480@75Hz
    [ 6.006] (II) modeset(0): 800x600@56Hz
    [ 6.006] (II) modeset(0): 800x600@60Hz
    [ 6.006] (II) modeset(0): 800x600@72Hz
    [ 6.006] (II) modeset(0): 800x600@75Hz
    [ 6.006] (II) modeset(0): 832x624@75Hz
    [ 6.006] (II) modeset(0): 1024x768@60Hz
    [ 6.006] (II) modeset(0): 1024x768@70Hz
    [ 6.006] (II) modeset(0): 1024x768@75Hz
    [ 6.006] (II) modeset(0): 1280x1024@75Hz
    [ 6.006] (II) modeset(0): 1152x864@75Hz
    [ 6.006] (II) modeset(0): Manufacturer's mask: 0
    [ 6.006] (II) modeset(0): Supported standard timings:
    [ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
    [ 6.007] (II) modeset(0): Monitor name: SMBX2331
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
    [ 6.007] (II) modeset(0): EDID (in hex):
    [ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
    [ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
    [ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
    [ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
    [ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
    [ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
    [ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
    [ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
    [ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
    [ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
    [ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
    [ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
    [ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
    [ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
    [ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
    [ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 6.063] (II) modeset(0): EDID for output DVI-1
    [ 6.116] (II) modeset(0): EDID for output TV-0
    [ 6.116] (II) modeset(0): Output DVI-0 connected
    [ 6.116] (II) modeset(0): Output DVI-1 disconnected
    [ 6.116] (II) modeset(0): Output TV-0 disconnected
    [ 6.116] (II) modeset(0): Using exact sizes for initial modes
    [ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.116] (==) modeset(0): DPI set to (96, 96)
    [ 6.116] (II) Loading sub module "fb"
    [ 6.116] (II) LoadModule: "fb"
    [ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.118] (II) Module fb: vendor="X.Org Foundation"
    [ 6.118] compiled for 1.17.1, module version = 1.0.0
    [ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.118] (==) Depth 24 pixmap format is 32 bpp
    [ 6.462] (==) modeset(0): Backing store disabled
    [ 6.462] (==) modeset(0): Silken mouse enabled
    [ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.535] (==) modeset(0): DPMS enabled
    [ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
    [ 6.535] (II) modeset(0): [DRI2] Setup complete
    [ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
    [ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
    [ 6.535] (--) RandR disabled
    [ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.552] (II) AIGLX: Loaded and initialized nouveau
    [ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
    [ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.741] (II) LoadModule: "evdev"
    [ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.744] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.744] compiled for 1.16.2, module version = 2.9.1
    [ 6.744] Module class: X.Org XInput Driver
    [ 6.744] ABI class: X.Org XInput driver, version 21.0
    [ 6.744] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.744] (**) Power Button: always reports core events
    [ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.744] (--) evdev: Power Button: Found keys
    [ 6.744] (II) evdev: Power Button: Configuring as keyboard
    [ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 6.744] (**) Option "xkb_rules" "evdev"
    [ 6.744] (**) Option "xkb_model" "pc104"
    [ 6.744] (**) Option "xkb_layout" "us"
    [ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.780] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.780] (**) Power Button: always reports core events
    [ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.780] (--) evdev: Power Button: Found keys
    [ 6.780] (II) evdev: Power Button: Configuring as keyboard
    [ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 6.780] (**) Option "xkb_rules" "evdev"
    [ 6.780] (**) Option "xkb_model" "pc104"
    [ 6.780] (**) Option "xkb_layout" "us"
    [ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 6.781] (II) No input driver specified, ignoring this device.
    [ 6.781] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
    [ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 6.785] (II) No input driver specified, ignoring this device.
    [ 6.785] (II) This device may have been added with another device file.
    [ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
    [ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 6.785] (**) Option "xkb_rules" "evdev"
    [ 6.785] (**) Option "xkb_model" "pc104"
    [ 6.785] (**) Option "xkb_layout" "us"
    [ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.803] (EE)
    [ 6.803] (EE) Backtrace:
    [ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
    [ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
    [ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
    [ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
    [ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
    [ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
    [ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
    [ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
    [ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
    [ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
    [ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
    [ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
    [ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
    [ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
    [ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
    [ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
    [ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
    [ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
    [ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
    [ 6.814] (EE)
    [ 6.814] (EE) Segmentation fault at address 0x0
    [ 6.814] (EE)
    Fatal server error:
    [ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 6.814] (EE)
    [ 6.814] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 6.814] (EE)
    [ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 6.817] (EE) Server terminated with error (1). Closing log file.
    Note the segfault in modesetting_drv.so!
    Any help?
    I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
    Is it possible that any old config files can cause this?
    EDIT:
    I tried kernel parameter "nouveau.modeset=0" but it didn't help.
    Last edited by cro (2015-02-26 16:33:19)

    Ok, I guess I solved it by reinstalling xf86-video-nouveau.
    Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
    And why does that lead to mysterious error messages and segfault??
    I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

  • In the expression editor dialog box my TAB key doesn't function correctly

    This is bizarre behavior that seems to have started recently.
    In Visual Studio 2012, an SSRS project, any expression editor dialog:
    The tab key doesn't work right.
    Open the expression editor and:
    * I see a blinking cursor and I can type in the expression box.
    * If I hit the tab key, the cursor disappears and I cannot type.  I appear to lose focus in the editor but focus doesn't appear to go anywhere else in the dialog box.
    * If I hit the tab key a 2nd time, the cursor is still gone and I cannot type. 
    * If I hit the tab key a 3rd time, I can finally type again and note that I am now
    3 tabstops in.  In other words it seems like the tabs were working but I lost the ability to type anything until I "tab" 3 magical times. 
    I can work around this by hitting tab key then grabbing the mouse and clicking where the cursor SHOULD be which returns focus to the text area.
    Hopefully this image helps clarify:
    Anybody know what is wrong?
    Microsoft Visual Studio Professional 2012
    Version 11.0.61030.00 Update 4
    Microsoft .NET Framework
    Version 4.5.50709
    Installed Version: Professional
    LightSwitch for Visual Studio 2012   04938-004-0034007-02367
    Microsoft LightSwitch for Visual Studio 2012
    Office Developer Tools   04938-004-0034007-02367
    Microsoft Office Developer Tools
    Team Explorer for Visual Studio 2012   04938-004-0034007-02367
    Microsoft Team Explorer for Visual Studio 2012
    Visual Basic 2012   04938-004-0034007-02367
    Microsoft Visual Basic 2012
    Visual C# 2012   04938-004-0034007-02367
    Microsoft Visual C# 2012
    Visual C++ 2012   04938-004-0034007-02367
    Microsoft Visual C++ 2012
    Visual F# 2012   04938-004-0034007-02367
    Microsoft Visual F# 2012
    Visual Studio 2012 Code Analysis Spell Checker   04938-004-0034007-02367
    Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
    Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
    The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
    Visual Studio 2012 SharePoint Developer Tools   04938-004-0034007-02367
    Microsoft Visual Studio 2012 SharePoint Developer Tools
    ASP.NET and Web Tools   2012.3.41009
    Microsoft Web Developer Tools contains the following components:
    Support for creating and opening ASP.NET web projects
    Browser Link: A communication channel between Visual Studio and browsers
    Editor extensions for HTML, CSS, and JavaScript
    Page Inspector: Inspection tool for ASP.NET web projects
    Scaffolding: A framework for building and running code generators
    Server Explorer extensions for Windows Azure Web Sites
    Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Windows Azure
    Color Theme Designer   1.0
    Designer for creating new color themes
    NuGet Package Manager   2.8.50126.400
    NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
    PreEmptive Analytics Visualizer   1.0
    Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
    SQL Server Analysis Services   
    Microsoft SQL Server Analysis Services Designer 
    Version 11.0.3369.0
    SQL Server Data Tools   11.1.40706.0
    Microsoft SQL Server Data Tools
    SQL Server Integration Services   
    Microsoft SQL Server Integration Services Designer
    Version 11.0.3369.0
    SQL Server Reporting Services   
    Microsoft SQL Server Reporting Services Designers 
    Version 11.0.3369.0
    BIDSHelper
    BIDS Helper 2012 - An add-in to extend SQL Server Data Tools - Business Intelligence (SSDTBI formerly BI Development Studio)
    (c) 2014 Version 1.6.6.0
    http://www.codeplex.com/bidshelper
    SQL Prompt 6
    For more information about SQL Prompt, see the Red Gate website at
    http://www.red-gate.com
    For customer support, call 1-866-733-4283.
    Copyright © 2006–2009 Red Gate Software Ltd

    Hi Bostaevski,
    Thank you for posting in MSDN forum.
    According to your description, as you said that the cursor disappears and cannot type issue. It seems that the issue may be not Visual Studio the VS IDE issue.
    In addition, I find a similar thread about the
    Expression Editor Cursor Issue,
    please see:  
    http://www.beta.microsoft.com/VisualStudio/feedbackdetail/view/780682/vs-2012-rdlc-expression-editor-cursor-issue#.
    Therefore, I suggest you could also try to press alt with left and right arrow keys and check if it is works fine.
    Thnank for your understanding!
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

     Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
     After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
      I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
     I had already restore the system.
     So, I use my laptop to work, and it has only 4 days of use.
     I need help! Thanks!

    Hi,
    Run through the following procedure.
    Boot the computer normally and log-in.
    At the black screen, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( including spaces ) and hit enter.
    Dism /Online /Cleanup-Image /RestoreHealth
    This will take a while to complete, but when it’s finished, restart the notebook.
    If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( there's a space between sfc and the / ) and hit enter.
    Sfc /scannow
    When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
    Restart the notebook again.
    Any change?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for