Forgot IPod password need to reset
My daughter changed her password to her IPod Touch and now she cannot get into it. I tried going to ITunes to restore it but it says you need to put in the password. What can we do? Please help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
Hello someone can tell me please i updated my iphone 5 from ios7 to ios8 it recuires my icloud for activation i forgot my password now i reset it but my new password is not opening my iphone
-
IPOD Touch 5th Generation Forgot Password Need to Reset
My son forgot his password for his ipod touch 5. when we try to reset it we get the following:itunes could not connect to ipod touch because it is locked with a passcode. You must enter your passcode on the ipod touch before it can be used with itunes. No matter what we try we cannot get the ipod touch to reset ipod touch ... have tried what they tell you on the ios page but if we hold the home button down we get "unable to connect to siri: Does anyone know how to reset the ipod?
iOS: Forgotten passcode or device disabled after ... - Support - Apple
-
Forgot ipod password how to I get into ipod?
I forgot my ipod password so what can I do to access the ipod?
You don't.
You need to restore it. Data not backed up will be lost.
http://support.apple.com/kb/HT1414
Use Recovery Mode if iTunes asks for a password.
http://support.apple.com/kb/HT1808 -
Forgot iPod pass code to reset setting
I have forgot the password to reset my iPod to factory settings
Is there a way to change it or get it reset without the old codePlace the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
If you restore from a backup made with you set a Restrictsion, the Restrctions passcode will also be restored -
HT201210 Forgot Ipod Password!!!
I forgot my ipod password and I can't restore it. There used to be an error when I tried to restore it, but now the erro changed because it updates while it does it and it say the ipod software update server could not be contacted and please check your network settings and try again. I don't know how to do that, please help! Also, people have said that they don't help you if you bring it into the store because you need to do it on your computer. Also, I tried googling this and people say that when you plug it into the original computer where itunes was first downloaded and everything and then unplug it it will automatically become unlocked but it isn't working! PLEASE HELP!!!
- Disable the computer's antivirus and firewall
- Use Google's DNS servers vice the ones provided by your internet provider. See:
Public DNS — Google Developers -
Forgot IPod Password, Disabled
My son forgot his password to his ipod touch and it has disabled. How can I reset the password?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hello everyone
I have recently bought an iphone 4s, and created an icloud account. And when you create an icloud account, it is used for icloud emas as well right? So what happened is that, i forgot my password for icloud account, and after resetting it, password recovery email is sent to icloud email. But i cant access it because its the same account as my icloud email. I dont want to lose my account. Please help.Go here: https://expresslane.apple.com/GetproductgroupList.do?PRKEYS=133314
After you enter your serial number, you can chat directly with an apple support tech. There is an option to request free support. They may not charge you for this issue. -
I have a 1010nr and bios password need to be reset, the code is CNU8453PWZ, Thanks fo any Help
This question was solved.
View Solution.Hi,
Enter: e9luvqf2d0 ( Note that the 3rd character is a lower case L and the last is Zero )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I forgot my password and tried resetting it and now it wont turn on
I forgot my password to get onto my ipod touch, 4th generation, 32gb. I searched "what to do when you forget your ipod touch password" I got an answer to hold my home button and power off button for 15 seconds until the ipod turns off then to plug it into itunes. I did this and now my i pod won't turn on and when i plug it into i tunes it won"t connect because it still won't turn on. Please help what do i do?
1. Hold down the home and power buttons for 10 seconds.
2. Let go of the power button but keep holding down the home button for 15 seconds.
3. Plug into iTunes. -
HT5312 forgot security question, need to reset them
I forgot security questions and I need to reset them
1) Apple ID: All about Apple ID security questions
If necessary
2) See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
3) Or Email Here > Apple Support iTunes Store Contact -
Forgot iPod password - Help Me!
Ive forgot my ipod 5th gen password, when i try to restore it on iTunes it comes up with a message saying 'The iPhone update server could not be contacted'.. And the option to sync is grey and it wont let me click it. All i want to do is factory reset it as i have all my things on my ipad, thank god for iCloud. So i dont think I even need to sync anything..HELP
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
Forgot Restriction Passcode-Need to Reset iPhone 5
Have tried resetting from backup but that doesn't eliminate the restriction passcode issue. Now am trying to reset the phone as a new phone. However, it's still prompting for the restriction passcode. Any idea how to get around this? I did use the iPhone Backup Extractor but that was a bit baffling.
TY.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
If none of the above work, then:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
Forgot user password, how to reset mac pro to factory settings
hi guys,
Recently I bought a used mac OS X 10.5, am very new to mac world. i am unable to load any softwares like wireless adapters since I am unable to get the password for the previous user. Also, I would like to reset the computer to factory settings, can I do that? Would you folks help me out!!
thanksThe Mac Pro has 4 internal drive sleds, no cables, that just pull out and slide back in.
Pull out the original drive and see what else is there.
Buy yourself or use one of your own drives.
HOLD 'C' to boot from a DVD.
Holding OPTION or Alt will show a boot menu of valid boot volumes (can include Windows even). You could boot from Windows CD/DVD and nuke the whole thing.
Before installing, go to UTILITY menu and DISK UTILITY and ERASE the drive (not the subset volume).
Assume you know your way around Mac and OS, yes?
You don't know what was or wasn't, and if you don't own license for software etc that is on the computer, another reason to wipe it clean.
Start from scratch.
Call AppleCare Customer Support and they can send out discs for fee, insure it is 'legit' (need to give them the serial number from case). -
Lost master password need to reset
Hello, My master password works on main computor, it will not work on my laptop, I found the link to reset the main computor but it doesn't work on my laptop, Is there a way to reset the master password , Then I'll go back to pen and paper. Thank you for whatever help you can provide, I'm sure someware their is a link to reset it.
You can delete the key3.db file and logins.json file and a possible signons.sqlite file or move them to another folder to make it possible to undo the action.
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Maybe you are looking for
-
Newbie ERROR- URL Encoded SQL Length exceeds allowed 32K limit
My SQL Query worked fine yesterday.( I'm still in developing mode) I made a copy of it and put it into a text file.( Just to be sure I had it.) Today When I tried to run it in APEX , I get error URL Encoded SQL Length exceeds 32K limit. Is there any
-
Calling PL/SQL procedures/functions
Hi all, What is the best way to call procedures and functions stored in Oracle database 10g, I am using ADF JSF. and can I call them inside the Appmod and EO's. thanks in advance, Ahmad Esbita
-
how do I make safari work again? I was trying to open an article on mashablaw when this happened. Please help
-
Controlling the appearance of a new browser window coming from a weblink
Hello all, I have a weblink. When the end user clicks on the web link a new browser window opens up. I would like to be able to control the appearance of the new browser window. I want to be able to hide url address bar, tool bar and all menus. Is th
-
Hi I have transported transfermation(from DSAO to Cube)from Dev to Quality.As a result the concerned DTP is deactivated and version is changed ro Revised.When Iam trying to activate the DTP in Quality.The Error is 1)Activation of Objects with Type Da