Forgot password and tryed to restore on itunes but it says i have to login to my device
forgot password and tryed to restore on itunes but it says i have to login to my device
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
ipod touch disabled after too many tries with password. tried to restore through itunes but says we need latest version of software. now what?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?
The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen. -
Recently I erased an iPhone 3 so that it could be passed on and used by someone else, using the erase all content and settings feature. This has killed my iPhone and it is now stuck on the Apple logo. I have tried a restore in iTunes but recovery fails. This is not a jailbroken iPhone. Anyone have any suggestions on how to proceed?
If you haven't already tried, see if you can force it into recovery mode to restore it:
http://support.apple.com/kb/ht1808. If that doesn't work, the last thing you can try is to put it in DFU mode to restore it: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0. -
Following updating my ipad2 to OS7 it asked for a passcode which I entered, when I turned the ipad off it requested the passcode but does not recognise the one I (thought) entered , the ipad is disabled. I tried to restore in itunes but wanted me to turn find my ipad off, as I can't get into the ipad i can't do this. Any suggestions as to how I can fix this?
For any of you with a similar problem, apple was able to help, you need to keep the round quite button press in while you connect your cable (which is it self connected to pc itunes) the ipad will then restore. hope this helps
-
I forgot my passcode, then I decided to restore through Itune but it says iphone 3 could not be restored error 1015 occurred. what should I do?
Was the computer used to jailbreak a different iOS device? Are you trying to forcibly install a version of iOS other than the current version for your device? (4.2.1 for the 3G, 6.0.1 for the 4 and 4S, 6.0.2 for the 5).
Those are the only other reasons you would get that error other than an extremely rare hardware failure. -
Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. It was set up and has been in use for about a year. What do I do now?
I Have seen people report this issue when they try to sync their devices but in never seen it when trying to restore an unresponsive iPad. I would sguggest trying recovery mode now.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This procedure will totally erase the iPad so I hope that you have a backup that you can restore from....assuming that it works, that is. -
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?
Welcome to the Apple Community.
Yes, update first, Settings > General > Software Update.
Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from. -
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
I had just updated my Mac to 10.6.1. When it finished, I had tried to open up Itunes but it says it requires 10.6.8 or later. When i had tried to update my mac it asked for my adiminstartor password. I dont know my password. Any way to reset it without using a disc?
Sure there is.
1. restart your computer in Single User Mode (by pressing Command + S during boot - see http://support.apple.com/kb/ht1492)
This will boot your OS X system in a kind of command line mode.
Note: this will not work if you have a Firmware password set.
2. when in Single User Mode, enter the following command
mount -uw /
to mount your OS X file system.
3. now you can enter the following command
passwd username
replacing "username" by your OS X user's short name. Then you will be prompted to enter the new password for that user. You will have to confirm that new password.
Note that you will not see any character showing when you enter the new password; this is expected behaviour. -
I created an apple id and tried to authorize my computer but it says that this apple id has not yet been used with the itunes store, why?
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311 -
I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?
There should be two sparse bundles on the TC, one for each Mac. If you click the TC in a Finder sidebar, you should see something like this (in Column View):
If you see the sparse bundle for the iMac there, but not on the window where you do a full system restore (after starting from your Recovery HD or OSX Install disc), they may be corrupted (especially if your iMac was failing at the time of the last backup).
Try repairing those backups, per #A5 in Time Machine - Troubleshooting.
Then try the full restore again, per Time Machine - Frequently Asked Question #14. Note that if you suspect problems on the most recent backup, you might want to select an earlier one. -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR
Maybe you are looking for
-
When I connect an input to DI channel of USB 6501 card from my board which has sourcing Output t, iIn the Off state it is not pulled down properly. The volatge on the port in is 2.1V -2.5V based on the pull down resistor on my board. I suspect that
-
Multiple problems with touchscreen on iPad Air
I bought an iPad Air right when it came out last year, and it has started to give me problems with the touchscreen. These problems don't happen all the time, just enough to be annoying - but not enough that I can discern any pattern. So I can't figur
-
Unabl eto share Internet connection through Airport
I have a new Samsung wave S8500. I'm trying to access the internet connection shared by my mac on the airport, everytime i try to connect to my mac through the Wi-Fi on my phone, it doesn't connect. I put a 40 bit WEP Key length on the sharing option
-
Hello , i have a barcode in a smartfom . now the issue is i have to reduce the size of the bar code and fit one more in the same space , separated by a line . Any suggestions , Honey
-
First, I want to say that - this is not the proper place to post this. But, i want to know the feedback from other members here. So, apology for that. Recently, approx for last 10 days i'm encountering continuous problem in this community. Very frequ