"Forgot Password" link doesn't generate an e-mail ...

Hi, I've been trying for five days to get access to a Skype account I set up but have not used for a few months. I apparently have the password wrong. I've used the "Forgot Password" link on the login page. That link should automatically generate an e-mail to me, but I've gotten no e-mail, despite multiple attempts. There is no e-mail in my spam folder either. So I've sent in two support requests. The only thing I got in response to the first one was an e-mail asking me to fill out a survey about the service I got. Which would make sense, except that I never got any service. At all. The second support request has produced no results. I know I'm using the correct e-mail address, because I initially couldn't remember my Skype name either, and managed to recover it using the "Forgot Skype Name" link. At this stage, the only option I can think of is calling my credit card company and telling them that I no longer approve of any further charges from Skype and they should be rejected. Does anyone on this list have any other suggestions of how I might get some service, any service, to get access to this account? Thanks for any advice you might offer.

twocoasts wrote:
Hi, I've been trying for five days to get access to a Skype account I set up but have not used for a few months. I apparently have the password wrong. I've used the "Forgot Password" link on the login page. That link should automatically generate an e-mail to me, but I've gotten no e-mail, despite multiple attempts. There is no e-mail in my spam folder either. So I've sent in two support requests. The only thing I got in response to the first one was an e-mail asking me to fill out a survey about the service I got. Which would make sense, except that I never got any service. At all. The second support request has produced no results. I know I'm using the correct e-mail address, because I initially couldn't remember my Skype name either, and managed to recover it using the "Forgot Skype Name" link. At this stage, the only option I can think of is calling my credit card company and telling them that I no longer approve of any further charges from Skype and they should be rejected. Does anyone on this list have any other suggestions of how I might get some service, any service, to get access to this account? Thanks for any advice you might offer.
if you have a billing or transaction history in the last 6 months, you can request for a new password without the need to your registered email address.    Just copy and paste the link below to your browser to open the password automation page;
login.skype.com/account/password-automation
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com | 

Similar Messages

  • Forgot Password link and Templates.

    I configured the Forgot Password Link in PT85212.
    When i click i go futhur to the page where it asks for the USerID.
    When i provide it and Continue ,my browser pops an error message like
    "Object Doesn't support this property or method
    PT_HNAV_TEMPLATE_JS_1.js
    Code=0
    URI:https://..../cd/uat_pwd/cache/PT_HNAV_TEMPLATE_JS_1.js"
    Any idea what could be going wrong?
    Edited by: mmaller0319 on May 1, 2013 9:33 PM

    that reset_pw api call is a pl/sql procedure just
    like any other. sure you could call it from a link,
    but you'd probably want your user to end up somewhere
    after they click it. a nice way to do it would be to
    have your link pop up a confirmation window. when
    your user confirms the desire to reset his password,
    you should have that window call our api and close
    itself. you can find tips/directions for
    implementing that kind of popup functionality all
    over this forum an in how-to docs like...
    http://otn.oracle.com/products/database/htmldb/howtos/
    how_to_create_custom_popups.html
    ...or you could simply code a wrapper around our api
    that redirects your users to a URL of your choosing
    like so...
    create or replace procedure my_logout_link as
    begin
    wwv_flow_fnd_user_API.reset_pw('SCOTT',:WORKSPACE_ID,'
    personalized message to scott about his password');
    htp.init;
    owa_util.redirect_url
    ('f?p=&APP_ID.:&APP_PAGE_ID:&APP_SESSION.');
    end;
    ...and then you'd just grant execute on that
    procedure to htmldb_public_user. after that, you
    could have your reset url link go to a target like
    "my_schema.my_logout_link", and things should work
    fine.
    hope this helps,
    rajI tried using wwv_flow_fnd_user_API.reset_pw and I keep getting an error message telling me that it doesn't exist or it must be declared etc. Am I missing something here?
    Thanks in advance.
    Ami

  • External forgot password link not working

    Hi,
    I am trying to reset the password using the Forgot password link on the External site page, after I click on the forgot password link and enter the username in the textbox and click on the submit button, it displays the error below.
    Error:cannot display page.
    You cannot complete this task because one of the following events caused a loss of page data:
    Your login session has expired.
    A system failure has occurred.
    The EBS version is 11.5.10.2 , OS version is Linux 64 bit.
    Thanks
    H.S

    Please see if these docs helps.
    Random error Your login session has expired when using Load Balancing [ID 387306.1]
    Random error Your login session has expired when using Big IP F5 DMZ Loadbalancing [ID 361397.1]
    Intermittently Receive "Error: Cannot Display Page" Across Multiple Products In RAC [ID 427931.1]
    When using a Load Balancer Oprocmgr Fails To Keep Session After Implementing JServ Load Balancing ACROSS Multiple Middle Tiers [ID 469690.1]
    11i/R12 How to Debug "Transaction Context Is Lost" or "You are trying to access a page that is no longer active" [ID 456906.1]
    Thanks,
    Hussein

  • Forgot password  link

    How to personalize Confirmation page of Forgot Password link functionality?
    Click Forgot your password?
    was able to personalized this one but want to personalize the NEXT one after this.
    Enter username and click submit
    How do we personalize the following message on the page below:
    “An email has been sent to the email address on file. Contact the system administrator if you do not receive your password within the next few hours. “

    Hi,
    You have to find out that file path,
    The first page is
    /oracle/apps/fnd/umx/password/webui/ForgotPasswordPG
    You can use functional administrator responsibility and user personalizatin tab to personalize this page.
    The controller for the above page is oracle.apps.fnd.umx.password.webui.ForgotPasswordCO.
    Since we dont have about this page and personalize option in that page, you have to open the ForgotPasswordCO and check where the control is redirecting .
    Then use functional admin and personalize.
    If somebody knows the result page path, please update here.
    With Regards,
    Kali.
    OSSI.

  • Resolved 'forgot password' link

    Just wanted to see if anyone knows if the 'forgot password' link thing has been fixed. I am currently signed in on my husband's Apple ID...I called Apple yesterday because I got one email to reset my password but the link was invalid and i tried to get a different email several times, and i never received another one. They told me they were having trouble with the site. Just wanted to see if there was anyone here from Apple that could help me. I have still been trying to get my password reset today, and still no emails. Wanted to see if I need to call back. Thank you.

    We are fellow users here on these forums.
    If you still aren't receiving them emails then Support in your country should be able to reset the password for you : http://support.apple.com/kb/HT5699

  • Want to customise the message display by adding extra text in Logon Help forgot password link

    Dear All,
      I am implementing Forgot Password functioanlity or link in my Portal ( SAP EP7.0).I am getting "Logon Problem ? Get Support " link in my Portal welcome page.When I am clicking this link ,I am getting pop up asking me to enter user id and mail id.Everything is working fine.
    But my real concern is I want to customise the message display in case wrong user id or mail id or wrong question answer.
    The current message displaying as "User information incorrect. Cannot send e-mail with new password" and I want to display it as
    "User information incorrect. Cannot send e-mail with new password ,Please contact your Administrator"
    If I will tell in one sentence ,I want to customise the message display by adding extra text
    For example: "User information incorrect. Cannot send e-mail with new password"
    Requirements:"User information incorrect. Cannot send e-mail with new password ,Please contact your Administrator "
    Kindly help em out  how to do it ................
    Thanks,
    Sanjay Mohanty

    Hi,
    Until you have only played around with the layout of the logon page and not the actual code then you will be able to use this property. There are bits of code in the logon par which retreives these values.
    For eg you can see the below if statement in the logon page to determine if logon help has to be displayed. This is part of standard logo page so if you have not removed this in your custom one everything should work just fine.
    <% if ( logonBean.getLogonHelp() ) { %>
    Also check this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/45/7e6313d8780dece10000000a11466f/frameset.htm
    Regards,
    Vijith

  • 11.5.10.2 - How to personalize Confirmation page of Forgot Password link

    We have implemented the Forgot Password functionality in our 11.5.10.2 system. We need to personalize the Confirmation screen message.
    How do we personalize the following message:
    "An email has been sent to the email address on file. Contact the system administrator if you do not receive your password within the next few hours."
    Reason:
    Our help desk is getting calls from our users because they think that they will have to wait for a few hours to receive their temporary password. Our goal was to eliminate calls to our help desk regarding forgotten passwords but this message is causing more calls than necessary.
    We need to change the message to read as follows:
    "An email has been sent to the email address on file. You should receive the email within a few minutes. Please contact the Support Center if you do not receive your password within an hour."
    I have accessed the CommonMessagePG that appears to control the Confirmation screen (/oracle/apps/fnd/umx/util/webui/CommonMessagePG) but I cannot find where to change the actual text of the message.
    Any advice?

    Try this:
    Go to "Application Developer" responsibility
    Select "Messages" from the menu
    Query the message name and then enter your message text in the "Current Message Text" field
    Save changes and exit
    Clear cache and bounce Apache to see the change.
    Also, the metalink article below might help:
    How to open customized page when click on "Forgot Password" URL ? [ID 556454.1]
    Kristofer Cruz

  • BBP_Start - forgot Password link needs a user

    Hi there,
    I've got just a short question.
    Everytime when I click on the link <forgot user or password? help!> The service needs a user to acces the next page.
    Can I customize a general user for this? And if so, where do I have to make these settings.
    Thanks a lot for your help.
    Kind regards
    Christian Rodemeister

    Hi @ all,
    thanks for this very helpful answers! This problem is solved.
    But another question is, do I need the same specification for the up- and dowload of documents? Because there I get also a seperate logon screen to get an acces to the server. Isn't it the ticketing wich handels this service for the logged on user?
    Again, thanks for your help!
    Kind regards Christian

  • Forgot Password link not working

    I was trying to add the sync to the new installation of windows 7. But i have forgot the password for the user account. I have tried so many times to reset the password but never received any emails from you guys.
    Help

    You are right. Sync's reset password feature is broken at the moment.
    I found a bug where the issue is being tracked and as soon as a fix is posted there I'll update this post. It looks like the server that sends the emails is offline or having some other sort of technical issue. I can't say for sure b/c I don't work for Mozilla.
    Anyway, even the Mozilla employees themselves are unable to get their password reset emails. So take comfort in knowing that you aren't the only one with this problem. :) As far as how soon you can expect a fix? I didn't see any timetable for that. I'll let you know if that changes.

  • I have an apple ID that I can't get to stop popping up and the 'forgot password' option doesn't work!  FRUSTRATED with iTunes

    I go into the old email account (that I don't use anymore) to see if it sends me a new password and it hasn't but I have it listed as the primary email/Apple ID for an account and I can't remember the password for it, but I can't get a new one.  SOOOOOOO FRUSTRATED.  Why can't I merge accounts and drop an old user name.  Help!! 

    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • Forgot Password link isn't  working  in the iRecruitment visitor page

    Hi All,
    Whenever I click on "Did you forget your password?" in the external iRec page , enter the email id whose password I want to reset and submit , I do not receive any mail.Please help me in fixing it.
    Thanks in advance.

    Is your mailer up and working ?
    Workflow Java Mailer & Notifications FAQ (Doc ID 562551.1)

  • When I create a new apple ID with a different email, it tells me that this email is already in use (I have never signed up for an itunes account prior to this). I then clicked on the "forgot password" link, but I never got an email. What do I do now

    To clarify: the apple ID I am currently using was created to have a temporary account.

    Contact iTunes by:
    https://expresslane.apple.com/Issues.action
      Click on "Account Management"

  • Forgotten sync password and can't find the "forgot password" button/link in option-sync tab.

    Mozilla firefox help database instructed us to access option-sync tab as follow to reset password
    1. Click the menu button New Fx Menu and choose Options.
    2. On the Sync tab, click Sign in to open the Sign in page.
    3. On the Sign in page, click Forgot password? Firefox will send you a reset email.
    4. Follow the instructions in your reset email to change your password.
    but in my firefox 36.0.4 there isn't any Sign in link, just Manage firefox account link. Clicked Manage to open manage account page, still can't find "Forgot password" link as stated above. So how do we reset password to sync? Please advise anyone.

    At first Go to https://accounts.firefox.com/settings
    # If you already signed in with your sync account
    #* You will see a message ''You are signed in as [email protected]''
    #* Sign out from your present account.
    #* Then you'll see log in page. At the bottom of the form you'll find '''Forgot password?'''
    # If you aren't signed in with sync account
    #* Then you'll see log in page.
    #* At the bottom of the form you'll find '''Forgot password?'''

  • HT5625 Trying to restore access to valid Apple ID via 'Forgot your password' link.  Email authentication never reaches address. Any ideas?

    I am trying to restore access to another Apple ID via the ‘Forgot your password’ link.   I enter the e-mail address as an apple ID and click ‘Next’.  This offers 2 options:
    1) Email authentication: To access your information, we will send an email to the address(es) on file for you.
    2) Answer security questions: To access your information, you will need to answer the security question(s) provided when you originally created your Apple ID.
    Selecting the first option, the message ‘Email has been sent’ is displayed.  However, no email is ever received at the address entered.  I have tried this numerous times.
    Selecting the second option offers the prompt ‘Please verify your birth date to continue.’  I enter the date of birth and am presented with the message ‘The authentication information provided does not match our records. Please verify your personal information and try again’.
    Catch 22 - can anyone help me, as this seems an impossible situation for me to rectify?

    I had a similar problem. I had to call Apple support via phone and ask what apple ids my email was associated with. He was able to give me the email server it was associated with (ex: yahoo, gmail, hotmail, etc) and that sparked off the memory I needed to recall that ancient and unused apple id. Then I had to recover the password, log in to that old id and change the primary email address.
    As for no verification email sent, there is a major lag between changing your settings and them actually changing in Apple's system. I don't know why this is. I couldn't delete a secondary email no matter what I tried. Then 4 hours later, it finally let me do it.
    hope this helped a litte, good luck!

  • Forgot Password Function

    I think I've seen someone post something like this before but can't seem to find it. When I click on the "Forgot Password" link generated from the Login Wizard, everything executes fine except at the end I get the message:
    Warning: Cannot modify header information - headers already sent by (output started at C:\xampp\htdocs\cio\forgot_password.php:19) in C:\xampp\htdocs\cio\includes\common\KT_functions.inc.php on line 464
    I've seen this before with session start, but what's the fix for this?

    The option you are talking about is with UPK 12.1. Not sure if it is also available in 11.1.0.2. With 11.1.0.2, you can specify the SMTP details in KCenter\web.config file. There is parameter for SMTP relay server. Mention your mailrelay server and the mails should start working.
    regards,
    SD

Maybe you are looking for