Forgot password of rcu - OIM 11g R2
Hi,
I forgot the password of oim schema created by using rcu utility.
Please let me know how to get the password of rcu.
Thanks
Do I need to do any other configuration changes after changing the password from command line.
I am asking this because when we configure OIM domain we use to give rcu password which I will be changing now, so do i need to do any other steps after changing the rcu password or it will work without any issue.
Thanks
Similar Messages
-
How to implement forgot password policy in OIM
Hi,
I want to implement forgot password Policy on OIM 11g r1.
Can any one please help me on this.
I mean from where to start and how is the follows goes..
Thanks in Advance :-)Forgot Password functionality is OOTB.
You can configure Forgot Password Question Answers. Go to System Configuration (Advance Console) and search for different properties associated with Challenge Questions Answers.
OIM.DisableChallengeQuestions
PCQ.NO_OF_CORRECT_ANSWERS
XL.IsDupResponseAllowed
etc..
You can also add new Challenge Questions as well by adding into Lookup.WebClient.Questions -
Dear Team,
Lost Password Management using OIM 11g.
we recently upgraded oracle access and indentity manager from 10g(10.1.4.3) to 11g(11.1.1.5).
we have a webcenter portal applications(11.1.1.6) in which we are using change password functionality so that users can change there passwords after login into the applications.
In OAM 10g(10.1.4.3) we used to use below url to change the password.
http://aeadsverp18-adp.adp.ae:7778/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?backUrl=http://aeadebab.adp.ae&login=%login%%userid%%ssousername%&target=top
We have placed above link in our webcenter portal page.
In OIM 11g is there link for change password like the same we have in OIM 10.1.4.3
Kindly adivce the steps to do the same.
Thanks,
Rajendra.For OIM 9i:
http://oimip:portno/xlWebApp/changePassword.do
for 11g:
Login to OIM11g go to self service tab, click on change password link. There you can get url for change password.
regards,
GP -
OIM 11g integration AutoLogin error (first login or forgot password)
Hi,
We are currently integrating OAM+OIM 11g (R2). We have used a 10g webgate for this.
When the user logs in for the first time, and sets his password and answers the challenge questions, he should be "Auto logged in" when he is finished.
The same scenario should happen, if the user forgot his password, and resets it. He should be "Auto-logged in" when finished.
This is not happending for us.
The OIM logs tells us this:
ERROR: Autologin failed oracle.iam.ui.platform.sso.exception.AutoLoginException: Error occured while retrieving TAP partner key from Credential store
We have tried to verify everything recommended by this Oracle Support article:
How to Solve Autologin problems in OIM with OAM? [ID 1475297.1]
Any ideas what we are missing?
Thanks & Regards,
HenrikMaybe this is a something?
Whate should the value of the property OAM_SERVER_VERSION be, when running idmConfigTool.sh and using a 10g webgate for the integration?
Chapter 7.6 in the integration documentation states this:
OAM_SERVER_VERSION: 11g (use 10g if Oracle Access Manager 10g is used)
http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oim.htm#CACFCJHI
Under chapter 2.4.5 in the idmConfigTool documentation it's described like this:
OAM_SERVER_VERSION: Required only when Access Manager server does not support 11g webgate in Oracle Identity Manager-Access Manager integration. In that case, value should be provided as '10g'.
http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/idmcfgtool.htm#CIHCICHD
When we ran the script, we had the value set to "11g" (because that's our OAM version)... now I'm wondering if I need to set this value at all..
Regards,
Henrik -
OIM 11g R2 installation Issue. OIM Schema creation failed using RCU 11.1.2
I have been trying to install OIM 11g R2 on a Windows server 2008 R2 64 Bit and have been encountering the following error during the OIM schema creation. The other schemas, such as Metadata, SOA, user messaging services and other associated schema creation was successful. But, the OIM schema creation was taking more than 2 minutes and finally it fails with the below error.
RCU-6130: Action failed
RCU-6135: Error while trying to execute java action.
Components used:
OS: Windows Server 2008 R2 64 Bit
DBS: 11gR2 (11.2.0.1)
RCU: 11.1.2
The first error occured was ora-12637 packet receive failed followed by Table or View does not exist. I could not fetch much information from the oim and rcu.log.
I have set the processes, open_cursors and session_cached_cursors as suggested in the preinstallation step of OIM 11g R2 installation.
Any pointers on this will be highly appreciated.
Thanks,
SriniCopy the msvcr71.dll file from rcuHome\jdk\jre\bin inside rcu installer and paste it in C:\Windows\SysWOW64.
Try running the rcu again with the new user i.e. instead of DEV_OIM, run it with DEV_OIM1.
Or drop the DEV_OIM user first and then use the same user. -
AD Password Sync connector 9.1.1 With OIM 11g R2 - ERROR OVER SSL
I have set up AD password sync with from AD to OIM 11G R2
The password syncs from AD to OIM 11G R2 on non ssl port 389.
But if fails on SSL Port 636.
Errors in OIMMain.Log:_
Debug [10/11/2012 10:49:34 AM] Inside ConnectToADSI
Debug [10/11/2012 10:49:34 AM]
ldap_connect failed with
Debug [10/11/2012 10:49:34 AM] Server Down
Debug [10/11/2012 10:49:34 AM]
Steps Carried Out thus far:_
AD is up and running.
Configured AD Password Sync Connector on 636 and selected ssl.
Created Certificate on OIM host, configured custom identity key store on weblogic. Restarted Weblogic.
Imported Certificate to AD. After this, restarted the AD
I can Telnet port 636 from OIM Box and also connect to AD through LDAP Browser on 636 and view OU and CN, so this seems fine.
Provisioning from OIM through Connector Server to AD works over SSL and this works fine.
Help would be appreciated.
Many ThanksThis question is now been fixed.
Instead of explicitly stating 636 for SSL,
Use the same port 389 for ssl and also configured oim port to be 140001 which is the ssl port for oim in the configuration of OIM Password Sync.
Export Certificates from AD to java security keystore and to weblogic keystore
Export .pem certificate created on OIM host machine to AD.
Restart weblogic, oim and AD
Everything would work fine.
For all the other information, refer to doc.
Thanks -
OIM 11g (OIMClient) API login without password
Hi,
Is it possible to login using OIMClient API with username only?
I would like to use a trusted web service to invoke the OIMClient API (using private key and username), this seems possible in the previous version of OIM, has anyone tried with 11g and how do you do it.
Alternatively is it possible to decrypt 11g password from a web service?
ThanksHi,
If you are looking for login to OIM using UserName/PrivateKey, refer the link below:
While login to OIM 11g using private key getting error
Regards,
Raghav. -
Delay in the change user password OIM 11g
Hi guys,
I have a problem with OIM 11g. The user accesses the OIM to do change your password, when the message that password is changed show, the user executed log-off and try access with new password, but the new password isn't accepted.
The new password is posted to AD immediately.
Only after of some time, the new password is accepted in OIM.
I need the new password is applied as in AD. When changing the password.
Someone know resolve this issue??
ThanksI don’t think this is possible. You can add some delay while changing target system password. But not guarantee.
-
Allowed set of characters for user name and password in OIM 11g
Hi,
Can anyone provide us quickly what is the characters (no.s,alpahbets,special symbols) that are supported for username and password field in OIM 11.1.1.5 ?
Thanks,
KarthikRead it , it is general for OIM 11g
http://docs.oracle.com/cd/E14571_01/relnotes.1111/e10132/oim.htm#CHDFFDGH -
Reconciliation of "change password on next logon" from AD fails in OIM 11g
Hello,
We have a use case on our OIM 11g project where we create a user in Active Directory and check *"User must change password at next logon"* box in AD.
We have setup AD as Trusted and Target resource (using connector 9.1.1.7), where users coming from AD will be created in OIM and password changes in OIM will be sent to AD. Also we use the password synchronization module (9.1.1.5) to synchronize the passwords from AD to OIM when they are changed in AD.
What we noticed is the "User must change password at next logon" is synchronized to the "AD Resource", but unlike the regular attributes it is not accessible normally because it's a system attribute.
What we expect is the user logging in to OIM will be prompted to change the password, but nothing happens when the newly reconciled user logs in (i.e. normal self-service page is shown). Same thing applies when we set the flag on an existing user also.
Did anyone get this working properly?
P.S. In a previous version it used to be the opposite where the user was constantly prompted for the password, even though it was changed in AD already, after changing the password using Alt+Crtl+Delete the user was still prompted to change when logging in to OIM. Oracle suggested we upgrade to 11.1.1.5.1 (most recent patch set) but now the reverse happens - we never get change password prompt now.
Thanks,
-JP
Edited by: JacekP on Oct 17, 2011 8:10 AMYeah, you're right, unfortunately we have dual authorative password model, where a user can change the password from OIM when he is accessing a OIM through a web interface or from his Windows machine through the domain controller. We need the use case to work fully both ways ideally.
A plan-B solution is to use a directory synchronization mechanism outside of OIM that would connect OID and AD, but we would prefer not to. -
OIM 11g setXellerate password fails with weird message on massive usage
Hi,
i have set up trusted reconciliation from a database table with OIM 11g (11.1.1.3). Now, the default password is the concatenation of two other fields and i have built an adapter that uses the setXelleratePassword method to set the OIM user password an attached it to the xellerate reconciliation insert event. Now, when running the reconciliation, the password is correctly set only for the first 10 users or so, after which i get this error for every following event.
<Apr 6, 2011 12:07:27 PM CEST> <Error> <oracle.iam.identity.usermgmt.impl> <BEA-000000> <The password change operation failed.>
<Apr 6, 2011 12:07:27 PM CEST> <Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcPasswordOperationsBean/setXelleratePassword encounter some problems: Error occurred while setting user password.>
Thor.API.Exceptions.tcAPIException: The password change operation failed.
at com.thortech.xl.ejb.beansimpl.tcPasswordOperationsBean.setXelleratePassword(tcPasswordOperationsBean.java:158)
at Thor.API.Operations.tcPasswordOperationsIntfEJB.setXelleratePasswordx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1074.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
the error is quite generic, and does happen only when there is a "massive" reconciliation run. I thought about the open file limit and the connection pool max values, but in the logs there are no errors related
What should i look at?
Thanks in advanceHi
Have you tried to change the reconciliation batch size to 1 or something?
I had something similar with just one account getting updated by my post-process hanndler.
Anyway how did you attach your adapter to the reconciliation insert event? I have been trying to do this but the list that comes back does include the adapter i have created when i tried to select and adapter to run.
Please guide how you did on design console or gui.
Thanks -
Hi ,
May I know how i can set a default password to all the users who are getting created in OIM 11g.In 9.1.X version,I can write an eventhandler to do this.Can I do the same thing in 11g as well?.Thanks.My apologies for the hijacking....
I have used basically the code in metalink...please see snippet below...i have storage enabled so i dont need to register the handler via ant script.
public EventResult execute(long processId, long eventId,
Orchestration orchestration) {
HashMap<String, Serializable> parameters =
orchestration.getParameters();
System.out.println("GenerateUsernameEventHandler####ParameterList=" +
orchestration.getParameters());
String loginName = getParameterValue(parameters, "User Login");
if (isNullOrEmpty(loginName)) {
String lastname = getParameterValue(parameters, "Last Name");
String employeeNumber =
getParameterValue(parameters, "Employee Number");
if (lastname.length() > 10) {
loginName = (lastname.substring(0, 11) + employeeNumber);
} else {loginName =(lastname + employeeNumber).replaceAll("\\s+$", ""); }
System.out.println("GenerateUsernameEventHandler####username=" + loginName);
orchestration.addParameter("User Login", loginName);;
return new EventResult();
public BulkEventResult execute(long l, long l1,
BulkOrchestration bulkOrchestration) {
throw new RuntimeException("Bulk Orchestration not yet implmented");
Please let me know...Thanks -
OIM 11g High Availability Deployment
Hi Experts,
I'm deploying OIM 11g in High Available schema, following Oracle docs: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF, I have succesfully installed and configured OIM & SOA in weblogic domain on 'OIMHOST1', trying to propagate the configuration from 'OIMHOST1' to 'OIMHOST2' I have packed (using pack.sh) the domain on 'OIMHOST1' and unpacked (using unpack.sh) it to 'OIMHOST2' so I have updated the NodeManager executing setNMProps.sh and finally Ihave started the NodeManager. In order to Test everything is fine and following the documentation I'm traying to perform the following steps, but I'm not succeed
I'M MUST TO SAY THAT I'M RUNNING ON SINGLE STANDARD EDITION DB INSTANCE AND NOT RAC AS MENTIONED IN ORACLE DOCS, PLEASE CLARIFY IF RAC IS REQUIRED, FOR NOW I'M IN DEVELOPMENT ENVIRONMENT, SO I THINK RAC IS NOT REQUIRED FOR NOW, PLEASE CLARIFY
8.9.3.8.3 Start the WLS_SOA2 and WLS_OIM2 Managed Servers on OIMHOST2
Follow these steps to start the WLS_SOA2 and WLS_OIM2 managed servers on OIMHOST2:
Stop the WebLogic Administration Server on OIMHOST2. Use the WebLogic Administration Console to stop the Administration Server.
Start the WebLogic Administration Server on OIMHOST2 using the startWebLogic.sh script under the $DOMAIN_HOME/bin directory. For example:
/u01/app/oracle/admin/OIM/bin/startWebLogic.sh > /tmp/admin.out 2>1&
Validate that the WebLogic Administration Server started up successfully by bringing up the WebLogic Administration Console.
Here its not possible start AdminServer on OIMHOST2, first of all, it looks like boot.properties file under WLS_OIM_DOMAIN_HOME/servers/AdminSever/security is not valid, the first time I try to execute startWeblogic.sh script, it ask for username/password, I have updated boot.properties (vi boot.properties) and manually set clear username and password, this time startWeblogic.sh script passed this stage, but fails:
<Error> <util.install.help.BuildMasterHelpSet> <BEA-000000> <IOException ioe java.io.IOException: No such file or directory>
<Error> <oracle.adf.share.config.ADFMDSConfig> <BEA-000000> <MDSConfigurationException encountered in parseADFConfigurationMDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "writeable" is invalid.
MDS-00503: The metadata path "/u01/app/oracle/product/Middleware/user_projects/domains/IDMDomain/sysman/mds" does not contain any valid directories.
I have verified that this directory "mds" does not exists, as reported by the IOException, in OIMHOST2, but it exists in OIMHOST1. from here its not possible for me following Oracle's documentation, I test this starting Adminserver in OIMHOST1, and starting WLS_SOA2 and WLS_OIM2 managed servers from OIMHOST1 AdminServer console, I have tested 2 ways:
1.- All managed servers in OIHOST1 are shutdown, for this, managed servers in OIMHOST2 works as expected
2.- All managed servers in OIMHOST1 are RUNNING, for this, first I have started SOA2 managed server, after that, I have fired OIM2 managed server, when it finish boot process the following message appears in server's output:
<Warning> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <This scheduler instance (servername.domainname1304128390936) is still active but was recovered by another instance in the cluster. This may cause inconsistent behavior.>
Start the WLS_SOA2 managed server using the WebLogic Administration Console.
Start the WLS_OIM2 managed server using the WebLogic Administration Console. The WLS_OIM2 managed server must be started after the WLS_SOA2 managed server is started.
8.9.3.9 Validate the Oracle Identity Manager Instance on OIMHOST2
Validate the Oracle Identity Manager Server instance on OIMHOST2 by bringing up the Oracle Identity Manager Console using a web browser.
The URL for the Oracle Identity Manager Console is:
http://oimvhn2.mycompany.com:14000/oim
Log in using the xelsysadm password.
Your help is highly apprecciated
Regards
JuanHi Vaasu,
I have succeeded deploying OIM in HA, just now my customer and I are working on the installation of webtier. Now I have a better understand about HA concepts and the way weblogic works -really nice, but little tricky-
All the magic about HA is configuring properly the network interfaces in each Linux boxes (our case) so, first of all you need to create 2 new floating IP's on each Linux boxes (google: how to create virtual Ip in linux, if you don't know) clone and modify your 'eth0' network script to create the virtual IPs
Follow the procudere in the HA guide: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF
create DB schemas with RCU
install weblogic
install SOA
patch SOA
install IAM
---if you are working on a virtual machine is good idea to take a snapshot here---
Create and configure the weblogic domain (special attentention whe configuring the cluster), see step 13 of 8.9.3.2 Creating and Configuring the WebLogic Domain for OIM and SOA on OIMHOST1, here you need to cofigure:
For the oim_server1 entry, change the entry to the following values:
Name: WLS_OIM1
Listen Address: the IP that is confured in eth0:1 of Linux box1
Listen Port: 14000
For the soa_server1 entry, change the entry to the following values:
Name: WLS_SOA1
Listen Address: the IP configure on eth0:2 of Linux box1
Listen Port: 8001
For the second OIM Server, click Add and supply the following information:
Name: WLS_OIM2
Listen Address: the IP configured on eth0:1 of Linux box2
Listen Port: 14000
For the second SOA Server, click Add and supply the following information:
Name: WLS_SOA2
Listen Address: the IP configured on eth0:2 of Linux box2
Listen Port: 8001
Click Next.
On Step 16 ensure you are using the UNIX tab to configure the machines, also ensure that for machine1 you use the IP configured on the eth0 interface of Linux box1, the same for machine2
please confirm you have performered 8.9.3.3.2 Update Node Manager on OIMHOST1
if everything is ok you must be able to start the AdminServer as described in the guide.
configure OIM: 8.9.3.4.2 Running the Oracle Identity Management Configuration Wizard, in my case I don't need LDAPsync, I have skipped this section, if you configure properly OIM, then you mus perform 8.9.3.5 Post-Configuration Steps for the Managed Servers
resrtar AdminServer then from the weblogic console, start OIM and SOA if node manager is properly configured SOA and OIM must run properly, update deployment mode and coherence as described in the guide and verify that OIM run perfectly in Linux box1.
Propagate OIM from Linux box1 to Linux box2 as described in the guide, using pack and unpack (you MUST use the same filesystem directory structure on both Linux boxes)
Update and start NodeManager as described in the guide
VERY IMPORTAN OBSERVATION
the guide say:
8.9.3.8.3 Start the WLS_SOA2 and WLS_OIM2 Managed Servers on OIMHOST2
Follow these steps to start the WLS_SOA2 and WLS_OIM2 managed servers on OIMHOST2:
Stop the WebLogic Administration Server on OIMHOST2. Use the WebLogic Administration Console to stop the Administration Server.
JUAN OBSERVATION:
IS NOT POSSIBLE TO START OR STOP ADMINSERVER ON HOST2 SINCE ADMIN SERVER WERE CONFIGURED TO LISTEN ON THE IP ADDRES OF eth0 INTERFACE ON HOST1, SO, ITS NOT POSSIBLE TO PLAY IT ON HOST2, I THINK AND ADDITIONAL PROCEDURE SHOULD BE FOLLOWED TO CONFIGURE ADMINSERVER IN HA IN A ACTIVE-PASSIVE MODE
Start the WebLogic Administration Server on OIMHOST2 using the startWebLogic.sh script under the $DOMAIN_HOME/bin directory. For example:
/u01/app/oracle/admin/OIM/bin/startWebLogic.sh > /tmp/admin.out 2>1& -----NOT APPLICABLE
Validate that the WebLogic Administration Server started up successfully by bringing up the WebLogic Administration Console. -----NOT APPLICABLE
Start the WLS_SOA2 managed server using the WebLogic Administration Console. ----START SOA2 FROM THE CONSOLE RUNNING ON HOST1, IT DOESN'T MATTER
Start the WLS_OIM2 managed server using the WebLogic Administration Console. The WLS_OIM2 managed server must be started after the WLS_SOA2 managed server is started. ------ START OIM2 FROM THE CONSOLE RUNNING ON HOST1
HERE YOU MUST BE ABLE TO LOGIN TO OIM2 SERVER AS DESCRIBED IN THE GUIDE, YOU DON'T NEED TO EXECUTE config.sh SCRIPT THIS SHOULD WORK AS DESCRIBED.
Server migration should work straight-forward if you have configured the floating IPs as described, I have not configured the persistence yet since my customer does not have the skills to share a storage.
I hope this helps, and feel free to comment or complement.
By the way, did you know how to set up a valid SSL certificate in Windows 2003 server??? I need it to test and Exchange 2007 I'm tryin to integrate
Regards
Juan -
OIM 11g R2-Issue while configuring oim domain in weblogic
Hi,
I'm trying to install OIM 11g R2 version and downloaded the entire suit from edelivery site.
Oracle DB version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Others like Weblogic, RCU and IdM suite versions are 11g R2 downloaded from edelivery site
When i try to configure domain for OIM in weblogic, getting the below exception which is returning no rows
Component Schema=OIM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/orcl
User=DEV5_OIM
Password=**********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='OIM' and version='11.1.2.0.0'
**CFGFWK-60850: Test Failed!**
**CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.**Hi,
It's likely that you need to Install/update the OIM schema by using the RCU. Its looking for the condition of the (where version =11.1.2.0.0) though it's not finding that version
-- What OIM schema is installed?
http://app-security.blogspot.com/2012/01/quick-oim-tip-finding-out-oim-version.html
Regards,
Daniel -
OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB
I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfullyWhenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin
Maybe you are looking for
-
ITunes 7 -error message when downloading
Hi Sorry if anybody else has raised this question, I currently have itunes 4 downloaded and am trying to download itunes 7, however i keep getting the following error from Apple support. "Service'IPod service' could not be stopped. verfiy that you ha
-
Keyhole DRM Application has encountered a problem and needs to close
Every time I try to run one of the games I have downloaded from Shockwave e.g Ciao Bella I get the error message "shockwave.com Keyhole DRM Application has encountered an problem and needs to close".
-
Equation editor in word for mac 2011
I apologize if this is straying too far from elements of the Lion discussion but I have seen others compliment the capability of the equation editor in Word for Mac 2011. It's icon is at the right end of the Document Elements toolbar. But
-
What is indexing and why does it take 122 hours?
What is indexing and why has it slowed my computer and why does it take 122 hours?
-
frozen at apple logo, can't turn off. Just stuck, how do I fix this?