Forgot screen password for my Ipad.

I forgot the screen password for my Ipad 2 and my daugther kept trying to guess it so there is a 1 hour wait when I enter the wrong password

If you have a passcode to the screen lock that you've forgotten, restore the iPad from the computer to which the iPad is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPad into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Similar Messages

  • I forgot my password for my ipad how can i unlock it

    i forgot my password for my ipad how can i unlock it

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot the password for my ipad and I'm not backed up

    i forgot the password for my ipad and im not backed up, i dont vwant to lose all my apps though as its for school

    If you forgot and has no backup then you have to restore as new. Meaning all the data will be wipe. You can re-download the apps for free if it's still available.
    Forgot or Wrong Passcode
    http://support.apple.com/kb/HT1212

  • HT4113 I forgot my password for my ipad. What will I do?

    I forgot my password for my ipad. What will I do?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • HT1212 hi i forgot my password for my ipad and its disable

    hi i forgot my password for my ipad2 and now its disable

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Forgot Exchange password for my IPad

    How can you retrieve a password for your IPad? My "Exchange" password is unknown

    If you have a passcode to the screen lock that you've forgotten, restore the iPad from the computer to which the iPad is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPad into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I forgot my password for my ipad

    HI,
    I forgot the my passowrd for my ipad and it is disabled.
    How can I reset password.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • HT4061 forgot my password for my ipad. how too i unlock it now.

    Forgot my password. How I can't long into my Ipad. I didn't wright it down so how do I reset my ipad?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • What to do if you forgot your password for the ipad 2

    help me!!!!!!!!!!!!!!!!!!!

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • TS2446 Forgot screen password for ipod

    How can I log into ipod when I have forgot the password on screen - the four numbers password? Please help as it keeps getting disabling the ipod and I cannot log in. The message in the end said connect to itunes but still cannot access my ipod

    You may need to put the iPod into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPod via your computer's iTunes and then restore (if you have a backup) or resync your content to it.

  • I forgot my password for my iPad 2

    Who ever helped me with this problem it had worked so thx to someone out there on Apple Support Communities :)

    If you forgot your password, you'll have to reset it as expalined here: http://support.apple.com/kb/HT5787.

  • Forgot my password for my iPad

    How to reset my iPad forgot my password

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    IOS: Wrong passcode results in red disabled screen
    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    If you cannot restore that way, you may have to use recovery mode
    http://support.apple.com/kb/ht4097

  • HT1212 i am having so much problem cause i forgot my password for my ipad i try it about 8 time and i dont no what to do

    can some one please help me i can not log in to my ipad i for get my password i have try every thing

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Some Users have reported as many as 12 or 14 attempts before success.
    Be sure to follow ALL the Steps and Do Not Rush...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT201210 forgot the password for my iPad

    hi,
    i forgot my ipad password

    Check out this kb.  It is a starting point
    http://support.apple.com/kb/HT1212

  • HT5625 i forgot my password for my ipad

    i forgot my password

    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Normal Style not displaying

    RH 11.0.4. I have been using RH since 4.0 and am currently I have a RoboHelp HTML project where I am using two different style sheets. Each style sheet is associated with its own Master Page. I've done this because my client wants to eventually migra

  • Question about parallels desktop

    Hello! I have a little problem with my Parallels Desktop. I have installed a windows xp operating system with parallels desktop, but the virtual video card's memory is only 256Mb. In Mac OS X i have 2 video cards. One with 256Mb memory and one with 5

  • Can @Prior or something similiar be used in a fix statement in this way?

    Hi, I have a substitution variable 'currmonth' set to 'may'. In my calc on my fix I use: Fix (jan:&currmonth), but then I need to fix on 'currmonth' minus 1 month so 'apr' like Fix (jan:apr). However each month the 'apr' part will increase by one as

  • Game Retrieval from iPod 5G

    Hi, I downloaded a game to my iPod from iTunes, but shortly after my computer started malfunctioning and I had to restore it to its factory condition to get rid of the problem. So now the game is in iPod only and I am wondering whether there is a way

  • Labview Intensity Graph Vertical Axis Label

    When I change the font of the vertical axis label of a Labview intensity graph, the label disappears. Is this a Labview bug or is there a way to correct the problem?