Forgot To Add Name Service When Setting Up Preinstalled Solaris 10

I just got a Sun Ultra 40 M2 Workstation.
I'm using the workstation to run a Java SE application that has clients connect to a serversocket using my static IP address.
I have the system currently set up and running on my windows xp pc.
So I have all the info from my ISP and I hooked up my int to the eth conn on my sun workstation.
Then I cut on the WS and it took me through the set up.
I said no to the DCHP and entered my static IP address and my submask address and it correctly found my broadcast IP upon rebooting.
But I said NONE to name service when I should have said DNS and entered the 2 addresses I have from my ISP.
Now when I get my Java Desktop the little monitor icons show up in the lower right hand corner and when i click on it it say IDLE but has my correct IP Broadcast and sub mask.
But my browser will not pull up web sites.
I need to add the name service DNS and enter my 2 addresses.
I also have the media disks.
Do I have to reinstall or can I just add the name service somehow?
I tried clicking F2 when restarting the system but do not know enough about it to get back to the set up.
So can anyone help me.
I think I will just reinstall in time if i can't get help but since the solaris 10 was preinstalled I think there is probably a way to go through the set up again but can not figure out how.

i added /etc/defaultrouter file with nothing but the default gateway ip in it
and just took the domain myhostname line out of the resolv.conf file leaving
nameserver 111.222.333.444
nameserver 222.333.444.555
also saved the nsswitch.dns to the nsswitch.conf file.
when i restarted it acted better and i was able to ping the gateway address which i could not before.
but still can not ping the static ip.
when i click on the icon it has the right ip and subnet mask listed.
any ideas?
i am running out of google lol.
no one at comcast has ever heard of Solaris and when i call support at Sun they just said we'll call back and sent an email saying it will be $700 to say hello after i just gave them 7k lol so screw that.
geuss i'll just relax and keep googling.
thx for the responses.

Similar Messages

Why IndexOutOfBoundsEx on add( 3, "f" ) when set initial capacity ArrayList

I created the below ArrayList (java 1.4.2_03) and it's throwing an out of bounds exception!
ArrayList a = new ArrayList( 34 );
//EVEN WHEN I USE THIS LINE, IT STILL THROWS THE EXCEPTION
//a.ensureCapacity( 34 );
a.add( 10, "something" );What could I be doing wrong? Is there a bug in 1.4.2_03?

The initial capacity means the AL can hold that many elements without resizing. It doesn't mean there are that many elements currently in the list.
You can't add at position 10 until you've added at least 10 elements (positions 0-9).

File Name error when creating file in Solaris C locale

Background Info:
1.In Java, we can use new File(filename) to create a new file. The filename there is a string denoting the name of the new file.
2.As mentioned in bug4409965, "The 'C' locale in a 7-bit ASCII locale, the 8bit characters enteredn are not read in properly probably because in that locale, the input byte stream is expected to contain only 7bit characters, anything else is 'garbage'".
My problem is:
when I tried to construct a filename containing non-ASCII characters in the Solaris C locale, Java works quite different from C language.
To be specify, follwing c code works quite well in C locale:
char * temstring = "\0xd6\0xd0";
FILE* fd = fopen(temstring, "w+");
fprint(fd, "test");
fclose(fd);
Although the created file can't be viewed in C locale, the filename shows quite well in other suppoted locale , which means the filename doesn't get modified.
While in Java, the following code
File f = new File("\0xd6\0xd0");
fos.println("test");
try {
f.createNewFile();
} catch (IOException e)
System.err.println(e.toString());
will generate the file in C locale as ???? as garbage file name. Even in the proper locale, the filename can't be read correctly.
I doubt the JVM in Solaris (file unixfilesystem.c) has modified the input filename and made the filename unreadable.
I just wonder if there is some workaround to solve this problem, which means I can correctly generate the filename using Java just as what the C code has done: create the file just as what I denote instead of modifing the filename.
Thanks

Hello:
Any luck with this problem?
I am facing the same problem and was wondering if you had found a solution....
Thanks
Kiran

RE: Object registering in Name Service

Hi,
You can always try to bind to a named object to know if it has been
registered with the name service. If it is not, you will get an
exception.
If you donot know the name of the registered object, then it is possible
to issue a command (NsLs) on the Name service agent. This command will
let you browse the contents of the name space directory. I have tried
this from the EConsole and it works, but with one hitch. It outputs its
results onto the Launch Window!!
Hope this helps.
Inderjyot Singh
Indus Consultancy Services
201-261-3100 x232
[email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Thursday, February 19, 1998 5:01 PM
To: Mark Sonnet
Cc: "Forte Users
Subject: Object registering in Name Service
When an anchored object is removed from the Name Service, the
remoteAccesEvent is posted on this object.
So it is easy to detect that an object has disappeared from the Name
service.
But , how can I detect at run-time that an object has appeared in the
name Service (so the opposite from the RemoteAccessEvent) ?
Thanks ,
Steven Arijs

Hi,
You can always try to bind to a named object to know if it has been
registered with the name service. If it is not, you will get an
exception.
If you donot know the name of the registered object, then it is possible
to issue a command (NsLs) on the Name service agent. This command will
let you browse the contents of the name space directory. I have tried
this from the EConsole and it works, but with one hitch. It outputs its
results onto the Launch Window!!
Hope this helps.
Inderjyot Singh
Indus Consultancy Services
201-261-3100 x232
[email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Thursday, February 19, 1998 5:01 PM
To: Mark Sonnet
Cc: "Forte Users
Subject: Object registering in Name Service
When an anchored object is removed from the Name Service, the
remoteAccesEvent is posted on this object.
So it is easy to detect that an object has disappeared from the Name
service.
But , how can I detect at run-time that an object has appeared in the
name Service (so the opposite from the RemoteAccessEvent) ?
Thanks ,
Steven Arijs

Forgot my skype name, and I cannot sign in with my...

Still got the password though!

Bit of an edit/clarification. I forgot my skype name, and when I try to sign in with my hotmail, I get an error. I have the password, though. What gives?

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

[svn:fx-trunk] 13304: When updating to TLF 584 forgot to add the new rsl and remove the old one.

Revision: 13304
Revision: 13304
Author:   [email protected]
Date:     2010-01-06 07:59:22 -0800 (Wed, 06 Jan 2010)
Log Message:
When updating to TLF 584 forgot to add the new rsl and remove the old one.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Added Paths:
    flex/sdk/trunk/frameworks/rsls/textLayout_1.0.0.584.swf
Removed Paths:
    flex/sdk/trunk/frameworks/rsls/textLayout_1.0.0.571.swf

iTunes needs QuickTime to work.
I think you will be all set if you install QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
Download the isntall file to your hard drive - don't install it over the internet.
If you are running anything Norton, turn that completely off before installing.

TS4006 How do I add iphone4s to iCloud's "find my phone"? I turned on macbook pros system prefs to "find my phone", turned on iphone4s's "location services" and set up iCloud, etc. iPhone4s still won't show-but macbook does show. It receives gmail, weathe

How do I add my new iPhone4s to iCloud's "Find my iPhone"? I followed the iCloud instructions and turned on Macbook Pros' system prefs to "find my mac", turned on iPhone4s's "location services" and set up iCloud, etc. In the "Find my iphone" tab of my new iCloud account (on my Macbook Pro) my iPhone4s still won't show—but my macbook does show. I had my iPhone4s set up at the phone store (2 days ago) and It receives gmail, my contacts and calender entries, the weather, etc. I installed the "Find iPhone" app from iTunes on the iPhone4s, synched to iTunes, even reset the phone, but the only device that gets located is my Macbook Pro. I can send a "sound" message to my Mac (and the Mac recieves it) but unable to see the iPhone4s from my Mac, let alone send any message. Any suggestions to get the iPhone4s device to appear in iCloud?
Thank you in advance for your help.

OK, I figured it out...I deleted the iCloud account off my iPhone (Settings, iCloud, Delete Account), and then added iCloud back in (Settings, iCloud, SignIn)....and then my email (iCloud) and "Find my phone" features worked! Nice!!!!

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote co

I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote count. Is this possible?

I ended up reformating the drive as FAT32 because I still need to use it on my Windows 98SE system also. I did have a problem with the allocation size. I wanted to use 512 bytes but it kept failing so I used the default size(8192 bytes) and then it worked fine. I didn't think there would be a problem formatting as NTFS but since you are having problems I just tried it. It failed at 512 bytes allocation size so I tried again using 4096 bytes, the default, as the allocation size and it failed again. It looks like these drives will not format as NTFS.
Also, I think I figured out what's going on with the ReadyBoost problem. As I said initially it wouldn't work with ReadyBoost then after I had 12GB of data on the drive the ReadyBoost feature started working. After I deleted all the files it quit working again. After doing some reading on the net about Flash drives and ReadyBoost problems it appears that the memory chips on my Lenovo Flash drive are mixed with both fast memory chips that work fine with ReadyBoost and slower memory chips that are too slow for ReadyBoost. Apparently, after I fill up the portion of memory with data that uses the slow chip(s) then ReadyBoost works fine with the fast chip(s). I also verified the Flash drives read and write memory speeds using Vista's Event Viewer. To work with ReadyBoost the Flash drive has to read at a minimum of 2.5MB/s (for 4KB random reads) and write at a minimum of 1.75MB/s (for 512KB random writes).
Let me know what you find out.

When setting up a new ipad how do you know what your user name is?

When setting up a new ipad how do you know what your user name is?

How to set up Apple ID
http://support.apple.com/kb/ht2731

How do I add an app to my location services when it does not come up automatically, How do I add an app to my location services when it does not come up automatically

How do I add an app to location services when it does not appear automatically

Have you tried Settings>Privacy>Location Services and see if you can turn it on in there?
Obviously it has to be an app that works with location services so if it is and nothing else works, delete the app and download it again to make it ask again if you want to allow your location to be used with it.

No "Add name" when attempting to share a calendar

I want to share an iCloud calendar, but when I go into the Edit screen and tap that calendar, the Add Name bar does not appear. It does appear on several other of my calendars, but not the one I want to share.

Auth objects S_RFC / S_SERVICE / UIU_COMP maybe??
Running an ST01 trace would be helpful in identifying the right objects and values.

Mail crashing when I try to add name to address book

Hi,
as of today, I'm no longer able to add names to my address book by clicking on the person's name in my email.
in the "from" field, I could click on that, and have a list of choices to add to my address book.
Now, when I click on that, it crashes my mail.
what can I do to fix this so it's working again?
Thanks,
Dave

If you can't get the exported .csv file to work you might consider using Migration Assistant: http://support.apple.com/kb/HT2518, particular if you need to move more than just your contacts. There is some granularity in the options on what to transfer but I'm not sure if you can choose to just your migrate contacts.

Forgot To Add Name Service When Setting Up Preinstalled Solaris 10

Similar Messages

Maybe you are looking for