Forgot to deauthorize Windows partition before deleting, now won't let me

Hello. I forgot to deauthorize my Windows (Boot Camp) partition and now I can't use the following tip:
"Tip: If you forgot to deauthorize a computer you no longer own, you can deauthorize all of your authorized computers at once. Choose Store > View My Account. You can use this method once a year."
I have no recollection of doing this once after January! I think this "once a year" thing is very unfair and makes accidental forgetfulness unforgiveable. I'm lucky it was my computer though
Anyways, is there a way that I can just deauthorize another computer from one computer or know if I reset the list already?

You cannot yourself deauthorize a computer (or in your case a Windows partition) that's not working or to which you no longer have access. You can authorize a total of up to five systems, so it's probably not really important that you deauthorize your dead partition now. Once you reach five total authorizations (and only when you reach five), the button will appear in your iTunes Music Store account that will allow you to deauthorize all your systems, so that would at that time recover the now-useless authorization.
If for some reason you really feel you need to deauthorize that partition now, you can try contacting the iTunes Music Store customer support department through the form at the bottom of their web page and explaining the problem to them. They might be willing to clear your authorizations for you.

Similar Messages

  • For unknown reasons iTunes will no longer open.  I have an HP laptop running windows 7 with Kaspersky protection.  It worked fine before but now won't open.  I tried downloading the most recent up-date and it will still not open.  Any suggestions?

    For unknown reasons iTunes will no longer open.  I have an HP laptop running windows 7 with Kaspersky protection.  It worked fine before but now won't open.  I tried downloading the most recent up-date and it will still not open.  Any suggestions?

    thrillhousecody
    Thanks for the reply with additional information.
    Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
    being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
    that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
    to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
    Can you disable one or the other card to determine the impact of this on your problem?
    But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
    Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
    version is rolled back to about May 2013. This may be one of the major factors here.
    a. Device Manager/Display Adapters and find out Driver Version and Driver Date
    b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
    driver version roll back.
    Please review and consider and then we can decide what next.
    Thanks.
    ATR
    Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
    later versions of Premiere Elements.

  • Remove Windows partition before or after upgrading to Leopord

    Hi,
    I have been using boot camp beta for some time. A short time ago, the Windows partition became unusable because the partition was too small. It appears the least risky approach would be to restore the disk to a OS X only system then re-install Windows on a larger partition. I have the Leopard upgrade disk. I have also read article 306805 which involves rolling back the computer clock.
    My question is would it be safer to remove the Windows partition before or after upgrading to Leopard?

    Backup and reformat your drive with Leopard. Then install both. You can use Migration Assistant to restore your files and settings.

  • I have an old apple id that I don't use (and I don't remember the password) and it now won't let me log in for updates, how can I delete it

    I have an old apple id that I don't use (and I don't remember the password) and it now won't let me log in for updates, how can I delete it

    Click here and try resetting that account’s password.
    That Apple ID is stored inside each of those applications. If you can’t get back into it, you’ll need to delete and redownload all of them, which may require repurchasing paid ones.
    (115401)

  • TS1702 I have just updated the op system on my phone, it now won't let me close down any apps that are open in the background, any ideas?

    I have just updated the op system on my phone, it now won't let me close down any apps that are open in the background, any ideas?

    Double-click the Home button to bring up the app screen, then swipe upwards on the app.
    http://howto.cnet.com/8301-11310_39-57602601-285/how-to-force-close-apps-on-ios- 7/
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.

  • Updated to latest operating system on MacBook Pro and now won't let me drag files onto a flash drive.

    Updated to latest operating system OS X Mavericks on MacBook Pro and now won't let me drag files onto a flash drive.

    The Flash Disk must be NTSF formatted. Writing to NTFS requires 3rd party drivers (Tuxera, Paragon). Reading from NTFS however does not require these. So install NTFS drivers, or format the drive in FAT32 from Disk Utility.
    Hope this helps :-)

  • I have the iPhone 4 and recently took a video with it it now won't let me watch it and says MOV what can I do to be able to watch it

    I have the iPhone 4 and recently took a video with it it now won't let me watch it and says MOV what can I do to be able to watch it

    You should be able to watch it on your iPhone or in iTunes on your computer.

  • HT201412 My phone went through an update now won't let me in. Reset on my computer and phone doesn't accept new password.

    My phone went through an update now won't let me in. Reset on my computer and phone doesn't accept new password. I went on line and changed password & confirmed ID and it still wont let me in. Refuses to go to main screen! WHY?

    I am having the same problem.

  • Is there a way to save the complete windows partition before upgrading the hard disk?

    Hello all,
    I am planning on installing a new hard drive in my MacBookPro, 2.4 ghz, model 3,1, Intel c2d, but before I do, I am concerned about how to save the contents of my Windows partition as I can not afford to lose the data I have on that part of the computer.  I regularily back up my Mac's contents to a Western Digital MyBook 2.0 500GB drive, but as far as I can tell, this only backs up the Mac content on my computer and doesn't touch the windows partition.   I also do not have the discs that came with my MacBookPro any longer thanks to a storage unit thief, so I am unsure of how to restore my Mac data onto the new drive from time machine without the discs.  Any help with either of these issues is greatly appreciated!
    Thanks!

    Who says you'll only use it once? Hard drives do fail and they fail at any time. Even SSDs fail.
    You can buy Parallels or VMware Fusion and make a Virtual Machine of your current boot camp Windows install then not worry about that Windows partition.
    The reason I don't have a Windows partition is many years ago I dual booted Windows versions and Linux and hated it. Always needing to go back to one of the other OSs then back to the other. With VM software that is a thing of the past.
    If you use Windows for 40-70% of your computing I suggest you invest in a Windows PC and Use the Mac for what it was made for, OS X programs.
    If your Windows computing is limited to office and the like programs then a VM may work just fine for you. It doesn't for me as I run heavy CAD programs and Photoshop on my PCs. But the VM on my Mac works for what I may need Windows for on a Mac.

  • I forgot to deauthorize my computer before it crashed..

    I didn't deauthorize my computer before it crashed.. The comp has been disasembled and thrown out san the HD. Therefore, that conputer goes against the 5 that were allowed to have.. Is there a way to contact Apple how to add one back?

    You can't deauthorise dead installations or computers you have no access to individually. If you've reached your limit of 5 you have the option to deauthorise them all in one go from your iTunes Store account and start over again. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation. If you haven't reached the limit of 5 just wait until you do and you'll get the deauthorise all option.
    To deauthorise all computers associated with your account:
    1. Click iTunes Store in the Source pane.
    2. If you're not signed in to the store, click the Account button, then enter your account name and password.
    3. Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
    4. In the Account Information window, click Deauthorize All.

  • HT1212 My daughter forgot her passcode so we reset it as per your instructions above. The problem is that she can't redownload any apps. It is telling us that she needs 4.3 and we have 4.2.1 . We had all kinds of apps on it before but it won't let us redo

    Please help. My daughter forgot her passcode and her apple id so we reset the ipod as per instructed I got her a new apple id. and now she can not redownload any of her apps. It says that she needs a 4.3 and she only has a 4.2.1. We are trying to download the same apps she had before and it won't allow it. I can not seem to get the 4.3.  We are unable to download anything. Any help would be appreciated.
    I was told it was a 3rd generation at purchase but when checking online it sometimes shows 3 and sometimes 2. I am totally confused and just want her to be able to use the device. Thanks and Blessings.

    If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • I got a secondhand MacBook pro and had to delete alot of things off it and it's it taking ages to delete and won't let me turn off or restart

    I got a secondhand MacBook pro and deleted the content from the person before e.g photos and word document but I tryed to delete them all at the one time and now finder is going really slow and it won't let me restart the computer. Please help

    Collin Ong1 wrote:
    if I were you, I'd just format and reinstall the whole system to clean off everything from the previous user.  Even after you delete their pictures and files, there will be a ton of preference files, config stuff, etc. from them left on the machine.
    Good call Collin. I would also zero the HD while I was starting over.

  • After IOS8 can't connect to App Store or ITunes Store on IPad 2.   Tried logging out but now won't let me log back in!

    Completely frustrated and considering dropping Apple.  My IPad 2 is quickly becoming a brick after loading IOS 8.  No WIFI problems, IOS up to date, logged out of the App Store and ITunes in settings - but no app store access, no ITunes access and my photos now won't load to IMAC.  Any suggestions?  Jeez, I really liked my Apple products, too...

    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the  Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
    2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • Changed iCloud id...now won't let me log into iCloud after software upgrade

    I changed my Apple/iCloud id a few months ago from one email address to another. Now, after I upgraded to iOS 7, it won't let me use my new id and keeps asking for the password for the old one. How do I fix this?

    Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)

  • ICal-all events deleted and won't let me add new HELP!!

    Hi there,
    Recently I started my iCal and all my entries were gone. Not only that, but it won't let me add new entries no matter what I do. As well, my to do list on the right is blank and the space on the left where my calendars were listed before is also blank. If I go into my computer I can find the files from iCal with the information but they aren't showing up in iCal itself.
    HELP!!
    Thanks

    klgreene595,
    Welcome to Apple Discussions.
    1. Can you associate this behavior with anything that you recently installed on your computer?
    2. Are you using MobileMe, or any other sync software?
    3. Do you have any backups such as Time Machine, or an iCal archive?
    4. What calendars do you have listed in your sources pane?
    5. Have you subscribed to any calendars?
    6. Do you have an iPad or iPhone?
    7. Where have you found the iCal files on your computer?
    8. Have you attempted to repair disk permissions?
    9. Try refreshing the iCal plist file. You will find the "com.apple.iCal.plist" file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, and drag the .plist file to your Desktop. Then log out/in or restart.

Maybe you are looking for

  • Problem with httpd and oracle database

    hi i have oracle linux with oracle database 11gR2 i install php with oci as the following link : http://oss.oracle.com/projects/php/dist/documentation/installation.html but when i try phpinfo() i found just only *" /etc/php.d/oci8.ini"* in the result

  • Is it just me or was coming back to BT a big mista...

    I received a call from BT in Jan of this year asking me if I would like to come back to BT for my phone calls(free evening and weekend) line rental and broadband for £24.95, from the very start it was a hassle (they told me it would be hassle free),

  • Error Message 302 on Model: WRT54G2

    Error Message simply states the following 1.  Exit the Program. 2.  Eject the Linksys EasyLink Advisor Setup Wizard CD. 3.  Restart your computer. 4.  Reinsert the Linksys EasyLink Advisor Setup Wizard CD. Tried this multiple times now, and I keep ge

  • OID and OIM Groups synchronization

    I'm using OID 10.1.0.4 and OIM 9.0.3.1 with Oracle AS. OID is a trusted source for OIM user reconciliation. Let's say, I have Group named Group1 in OID (under cn=Users container) I've created user group Group1 in my OIM. Is there any standard way to

  • Oracle iLearning, Flash learning interaction implementation

    I am new in iLearning. I am developing contents and assessments for uploading to iLearning. Instead of using iLearning assessment builder, I have used Flash learning interaction (SCORM). I have created several test with Flash learning interaction but