Forgot to eject LaCie external HD - can it be fixed?

Through my own stupidity, I forgot to eject my LaCie external HD before I powered off the LaCie (it was late and I was tired). Now it won't mount on my iMac G5. I tried to repair it using Tiger's disk utility but to no avail. I just get an "exit error" message. Does anyone know if repairing the LaCie thru Tiger's disk utility would fix it? I'm afraid to try. Or is the LaCie now a lost cause?
Thanks for any advice.

Eugene,
I read your post this afternoon and had to wait until I got home to try an experiment.
I turned on my Lacie drive, and let it mount to /Volumes/Lacie Disk. I then shut it off. After turning it back on, I got the "Device Removal" error that you probably got. After waiting a few moments (probably about one minute or so), the drive automatically mounted.
If yours still doesn't mount after waiting for a reasonable amount of time open a terminal window and type the following command:
mount <return>
This should result in something like this:
automount -nsl [182] on /Network (automounted)
automount -fstab [186] on /automount/Servers (automounted)
automount -static [186] on /automount/static (automounted)
/dev/disk3s6 on /Volumes/LaCie Disk (local)
If you have the Lacie in the list, try the following command
sudo umount -f /Volumes/Lacie\ Disk
You will be prompted for your administrator's password. Also, the backslash is needed to force the space between the words 'Lacie' and 'Disk'. This will force the file system to be umounted.
Then try turning it on again.
Good luck,
Steve

Similar Messages

Forgot to eject LaCie HD - won't mount now - can it be fixed?

Through my own stupidity, I forgot to eject my LaCie external HD before I powered off the LaCie (it was late and I was tired). Now it won't mount on my iMac G5. I tried to repair it using Tiger's disk utility but to no avail. I just get an "exit error" message. Does anyone know if repairing the LaCie thru Tiger's disk utility would fix it? I'm afraid to try. Or is the LaCie now a lost cause?
Thanks for any advice.

Hi Eugene,
Did the same a while ago. My LaCie was dead.
Using Data Rescue X (from Prosoft I believe) was quite helpfull. You can retrieve data from your 'dead' LaCie and fix the drive once your valuable data is rescued...
http://www.prosoftengineering.com/products/datarescueinfo.php
Perhaps the 'testdrive' is all you need...
Good luck!
Henk

Is anyone else receiving "The operation can't be completed because an unexpected error occurred (error code -50)" when attempting to transfer files from laptop to LaCie external HD?

This issue has only developed since upgrading the OS to Mavericks. I've been unable to save files to my LaCie external hard drive. Any and all suggestions are greatly appreciated. I've tried looking here for the code -.50, but nothing comes up.

I have the same problem. I am not able to write to my external drives when I wake my computer (I can read from them though). I get the same message as you do. My only solution is to force eject my drive and reconnect it. I am not sure if this is related to Mavericks but this did not happen before. Anybody else experiencing this or have a better solution?

How can I get my LaCie external hard disk icon to reappear on my desktop?

The iMac discussion section does not seem open to me asking this question. It's geared to the Intel Macs or other categories which do not allow for me to type in the following question:
Bottom Line Question:
How can I get my La Cie external hard disk icon to re-appear on my desktop?
Background:
I clicked Go > Computer
At that point there the usual set of icons in the far left hand column, including one for my LaCie external hard disk. Near that icon there was a dark upturned truncated/shortened arrow. I absent-mindedly clicked on that dark arrow, and at that moment I could hear my LaCie external hard drive power down; I heard the sound of hardware powering down.
The LaCie external hard drive is sitting right next to my iMac and its blue light is ON so I know that at very least I didn't turn it off.
But where is it?
And how can I get it to reappear on my desktop?
Right now when I click onto Go > Computer, the LaCie external hard drive disk is NOT THERE.
Thank you.
Lorna in Southern California

James, yes. I put the question in the iMac section and did get some solutions. My LaCie external hard drive is back now. I was aware that the arrow is connected to Eject actions, but was concerned when I went to Finder Preferences and selected the LaCie to show up on the Desktop, and its icon did not show up on the desktop. I hope you and your family are enjoying the weekend, James. But how could you not: You have little Kate there with you. Lorna in Southern California

I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

LACie external HD no longer appears on desktop, can't remount it

Help-
I have a LACie external hard drive, connected to my PowerBook G4 by USB. The computer recognized it until today when the computer crashed. It now won't recognize the external hard drive. I have turned everything off/disconnected/waited/reconnected and it still doesn't work. The LACie also doesn't show up in the disk utility for remounting. It does show up under the system profiler, but there's nothing I can do with it there. The LACie is recognized when I plug it into other computers. Any suggestions as to how to get it to appear on my desktop again?
Thanks.

It might be a hard drive problem. Try booting from your Tiger DVD and running Disk Utility from there to check the hard drive. Disk Utility is a limited app, though; ideally you should be using DiskWarrior or Prosoft Drive Genius. I haven't tried Drive Genius, but did buy DiskWarrior a while back, and it has been worth every penny, saving my hide a number of times.

My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected an external HD that had been on the desktop (i.e. I forgot to eject it properly), started displaying video anomalies (lines); testing (TechTool Deluxe 3.1.3) indicates the video is f

My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
an external HD that had been on the desktop (i.e. I forgot to eject it
properly), started displaying video anomalies (lines); testing
(TechTool Deluxe 3.1.3) indicates the video is failing.
The graphics card is an ATI Radeon X1600. Is this reasonably
replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
same unit?
My soldering skills are, sadly, poor.
And it only dawned on me a couple days ago that because this iMac does
not have a Core 2 Duo processor, it will not be able to enter the
"Lion" generation.
Thanks,
Patrick
PS Are manuals for this model available? I have a copy of the Peachpit
Apple Training Series "Desktop and Portable Systems, Second Edition"
but it only goes up to the G5 20" iMac. There doesn't appear to be a
3rd or later edition in the series.

My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
an external HD that had been on the desktop (i.e. I forgot to eject it
properly), started displaying video anomalies (lines); testing
(TechTool Deluxe 3.1.3) indicates the video is failing.
The graphics card is an ATI Radeon X1600. Is this reasonably
replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
same unit?
My soldering skills are, sadly, poor.
And it only dawned on me a couple days ago that because this iMac does
not have a Core 2 Duo processor, it will not be able to enter the
"Lion" generation.
Thanks,
Patrick
PS Are manuals for this model available? I have a copy of the Peachpit
Apple Training Series "Desktop and Portable Systems, Second Edition"
but it only goes up to the G5 20" iMac. There doesn't appear to be a
3rd or later edition in the series.

I forgot to eject camera before disconnecting, and somehow left five file folders on the desktop that have the same name as the device, can't open, delete,eject, or move.

Forgot to eject device(camera) before diconnect, now have five file folders on desktop(same name as camera) which cannot be opened, moved, ejected or deleted.

Where do you stand now regarding those folders? Are the photos still on the camera's memory card ( the SD card or Compact Flash)? If so, you could reconnect the camera and use your usual transfer software to perform the action once again. Do you transfer the photos straight to iPhoto? Use Image Capture? The camera's bundled software? We can start the hunt for the files by doing a Spotlight search by typing in the name of the folders (or even just the camera) to see what is already on the internal drive after the unsuccessful disconnect.

I'm not sure if my iPhoto library is being backed up by Time Machine. I am backing up to a LaCie external hard drive. I can open photos that are in folders but not those that are in iPhoto.

I'm not sure if my iPhoto library is being backed up by Time Machine. I am backing up to a LaCie external hard drive. I can open photos ont the hard drive that are in folders but not those that are in iPhoto.

Do a restore from Time Machine. That will tell you.

I have an issue with time machine, it doesn't find the Lacie external driver it use to use. it is the same drive that I usaly use for time machine back ups. It is corectly plugged. What can I do ?

Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?

Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago. I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

How can i access my lacie external drive with os mountain lion

I have just upgradet my macbook pro from snow leopard to mountain lion, and now i can't restore my backed up files from my Lacie external drive.
When i try to connect to it through time machine or migration assistant i get the message:
"the version of the server you are trying to connect to is not supported"
I have tried to enable all UAMs but i still can't connect.
I have browsed after other similar situations, but i can't seem to find any though i'm hardly the only one with this problem.

If the backup was made using time machine, you should be able to access any files you need or want manually using the finder. It may not be pretty, but it should work. I don't know why the migration assistant would be unable to access it though.
If you can't access the contents of the backup with the finder, then I would say your problem is a bit more serious.

Can I put the hard drive from my Lacie External HD into my 1.25 G4?

I have a 1.25 GHZ G4 and would like to increase it's internal storage. If I can I would like to put my Lacie External HD into my machine (120 GB) and then purchase a new larger HD to place in the Lacie box. I'm not sure if this is possible? What do I need to check when looking for a new HD for my machine? Any help would be appreciated.

Assuming that the hard drive in your external case is a 3.5 inch unit, it will work just fine. The only thing you have to do is make sure that your jumpers are set properly (master on your OS drive, slave on your secondary drive). There is a possibility that you will have to purchase a different hard drive cable, unless your machine is already setup with a dual cable & the stack bracket (you also have to make sure that the 'master' drive is plugged into the end of the cable & the 'slave' drive is plugged into the middle of the cable). I have never had a problem putting a larger hard drive into an external case (all of mine have been firewire). I hope this helps.

LaCie External DVD R/RW - can it play regular video dvds on my iBook?

So I've got this LaCie external DVD R/RW drive (designed by Porshe - but who cares?) and I can wiret and re-write dvds of data okay. I use it for backing up my files sometimes, and just extra storage space... But I don't seem to be able to watch a regular DVD movie on my iBook using this external drive (and the disc drive in the iBook is just a CD-ROM that's it.)
So, I'm just wondering if the Apple iBook G3 is even capable of playing a regular DVD video? I have this suspicion that this iBook's Graphics hardware just might not be up to the DVD movie playing requirements?
Is that my problem? Or is there something I can do? Thanks in advance.

Nevermind I just got VLC and that seems to play the DVD alright.
I've had this drive for a little over a year now, and I had basically writen off my iBooks ability to play DVDs because "DVD Player" the application that comes with the O/S said it wasn't possible, well, VLC proved DVD Player wrong.

UserEventAgent won't let me eject my external hard drive, and other problems

I'm running a MacBook Pro (2008-ish model) running Mountain Lion 10.8.2 with 4Gb of RAM and 750Gb of internal HD (the original 250Gb seriously cramped my style), and UserEventAgent is acting all weird.
Because of that old 250Gb HD, I was in the habit of storing files I didn't need at the time on an external hard drive, a LaCie 500Gb connected by FW800 (probably not relevant). And lately, whenever I plug it in, I can't eject it without forcing it to eject.
Using the "list open files" command and searching for that drive [ lsof | grep LaCie ] reveals that UserEvent drops an immediate hook in it for some reason. This connection is immediate, and short of force-quitting UserEventAgent in Activity Monitor at the exact moment I try to eject that drive, I can't disconnect it properly without forcing it or shutting down completely.
In fact, looking at UserEventAgent's open files and ports in Activity Monitor, something just plain doesn't look right:
/usr/libexec/UserEventAgent
/System/Library/Frameworks/Security.framework/PlugIns/csparser.bundle/Contents/M acOS/csparser
/private/var/folders/td/hnt8krzc8xj63p001s61rg7r0000gn/C/mds/mdsDirectory.db
/usr/share/icu/icudt49l.dat
/System/Library/UserEventPlugins/ACRRDaemon.plugin/Contents/MacOS/ACRRDaemon
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/heimdalodpac.bundle/Con tents/MacOS/heimdalodpac
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/LKDCLocate.bundle/Conte nts/MacOS/LKDCLocate
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/Reachability.bundle/Con tents/MacOS/Reachability
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/SCKerberosConfig.bundle /Contents/MacOS/SCKerberosConfig
/System/Library/UserEventPlugins/AirPortUserAgent.plugin/Contents/MacOS/AirPortU serAgent
/System/Library/UserEventPlugins/AppleHIDMouseAgent.plugin/Contents/MacOS/AppleH IDMouseAgent
/private/var/db/mds/messages/se_SecurityMessages
/System/Library/UserEventPlugins/AssistantUEA.plugin/Contents/MacOS/AssistantUEA
/System/Library/UserEventPlugins/AutoTimeZone.plugin/Contents/MacOS/AutoTimeZone
/System/Library/UserEventPlugins/BTMMPortInUseAgent.plugin/Contents/MacOS/BTMMPo rtInUseAgent
/System/Library/UserEventPlugins/BluetoothUserAgent-Plugin.plugin/Contents/MacOS /BluetoothUserAgent-Plugin
/System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bund le/Contents/MacOS/AppleHDAHALPlugIn
/System/Library/UserEventPlugins/BonjourEvents.plugin/Contents/MacOS/BonjourEven ts
/System/Library/UserEventPlugins/CalendarMonitor.plugin/Contents/MacOS/CalendarM onitor
/System/Library/UserEventPlugins/CaptiveUserAgent.plugin/Contents/MacOS/CaptiveU serAgent
/System/Library/UserEventPlugins/DiskUnmountWatcher.plugin/Contents/MacOS/DiskUn mountWatcher
/System/Library/UserEventPlugins/EAPOLMonitor.plugin/Contents/MacOS/EAPOLMonitor
/System/Library/UserEventPlugins/GSSNotificationForwarder.plugin/Contents/MacOS/ GSSNotificationForwarder
/System/Library/UserEventPlugins/LocationMenu.plugin/Contents/MacOS/LocationMenu
/System/Library/UserEventPlugins/PrinterMonitor.plugin/Contents/MacOS/PrinterMon itor
/System/Library/UserEventPlugins/SCMonitor.plugin/Contents/MacOS/SCMonitor
/System/Library/UserEventPlugins/alfUIplugin.plugin/Contents/MacOS/alfUIplugin
/System/Library/UserEventPlugins/com.apple.SoftwareUpdate.UserNotification.plugi n/Contents/MacOS/com.apple.SoftwareUpdate.UserNotification
/System/Library/UserEventPlugins/com.apple.TimeMachine.plugin/Contents/MacOS/com .apple.TimeMachine
/System/Library/UserEventPlugins/com.apple.bonjour.plugin/Contents/MacOS/com.app le.bonjour
/System/Library/UserEventPlugins/com.apple.cfnotification.plugin/Contents/MacOS/ com.apple.cfnotification
/System/Library/UserEventPlugins/com.apple.dispatch.vfs.plugin/Contents/MacOS/co m.apple.dispatch.vfs
/System/Library/UserEventPlugins/com.apple.fsevents.matching.plugin/Contents/Mac OS/com.apple.fsevents.matching
/System/Library/UserEventPlugins/com.apple.iokit.matching.plugin/Contents/MacOS/ com.apple.iokit.matching
/System/Library/UserEventPlugins/com.apple.launchd.helper.plugin/Contents/MacOS/ com.apple.launchd.helper
/System/Library/UserEventPlugins/com.apple.locationd.events.plugin/Contents/MacO S/com.apple.locationd.events
/System/Library/UserEventPlugins/com.apple.notifyd.matching.plugin/Contents/MacO S/com.apple.notifyd.matching
/System/Library/UserEventPlugins/com.apple.rcdevent.matching.plugin/Contents/Mac OS/com.apple.rcdevent.matching
/System/Library/UserEventPlugins/com.apple.time.plugin/Contents/MacOS/com.apple. time
/System/Library/UserEventPlugins/com.apple.universalaccess.events.plugin/Content s/MacOS/com.apple.universalaccess.events
/System/Library/UserEventPlugins/com.apple.usernotificationcenter.matching.plugi n/Contents/MacOS/com.apple.usernotificationcenter.matching
/System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDLib.plugin/Con tents/MacOS/IOHIDLib
/private/var/folders/td/hnt8krzc8xj63p001s61rg7r0000gn/C/com.apple.LaunchService s-036501.csstore
/usr/lib/dyld
/private/var/db/dyld/dyld_shared_cache_x86_64
/dev/null
/dev/null
/dev/null
count=1, state=0x2
/dev/io8log
/Users/<username>/Library/Assistant/sync_flag
->0xc1a78b298c30c655
count=0, state=0
count=0, state=0
/private/etc/com.apple.screensharing.agent.launchd
/private/etc
/private
/usr/local/bin
/usr/local/bin
/usr/local
/usr
count=0, state=0
/private/var/db/PanicReporter
/private/var/db
/private/var
/private
count=0, state=0
/private/var/db/GPURestartReporter
/private/var/db
/private/var
/private
count=0, state=0
/private/etc
/private/etc
/private
count=0, state=0
/Users/<username>/Library/Services
/Users/<username>/Library
/Users/<username>
/Users
count=0, state=0
/Library
/Library
count=0, state=0
/Applications
/Applications/Utilities
/Applications
count=0, state=0
/Library/Caches
/Library/Caches
/Library
count=0, state=0
/Library/Preferences/com.apple.AirPortBaseStationAgent.launchd
/Library/Preferences
/Library
count=0, state=0
/Applications/Fun/Steam.app
/Applications/Fun
/Applications
/Volumes
/Volumes
The repetitions (I mean seriously, who needs three open connections to /dev/null?), and the multiple instances of "count=0, state=0", suggest that UserEventAgent is getting bad info from somewhere.
If I can track down what's making UserEventAgent imitate an overly amorous octopus, maybe I can straighten out this mess. But I wouldn't be surprised to find that this list has picked up funky smells and bad habits from all the earlier versions of OS X I've run.
Help? Please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Forgot to eject LaCie external HD - can it be fixed?

Similar Messages

Maybe you are looking for