Forgot User Password for Satellite P100-313
Hi@all,
i forgot the user password for Satellite P100-313. Can i remove the password without professional help. Please help me.
bye
Hi Megaton,
Assuming you have not set an Administrator password in Windows XP, you can change your personal user password (even if it is the only one that appears when you normally start Windows) as follows:
Start your laptop in Safe Mode by pressing F8 after the Toshiba screen, and choosing Start In Safe Mode from the menu.
When Windows starts and shows the logon screen, there should be an extra account called Administrator. Unless you have previously set a password for this "hidden" account, there will be no password and you should be able to log in just by choosing this account and pressing Enter.
Once in, go to Control Panel and open User Accounts. Now choose the account that you forgot the password to, and a new window will open with various options including Change Password. Choose yourself a new password and restart the computer normally.
When Windows restarts, you should notice that the Administration account is once again not shown, however, you should be able to log in to your personal account using your new password.
I hope this helps, let us know how you get on!
Weezle
Similar Messages
-
HT2900 Forgot user & password for Safari parental controls. Is there a bypass?
We set up parental control on Safari but forgot the username and password needed to change or reset the parental control settings. Is there a bypass in order to turn the controls off?
Any user with Admin access to the Mac should be able to use their account name and password to unlock the Accounts Preferences and access parental controls.
-
Forgot startup password for my Satellite Z930
I forgot my password for my z930. I bought the laptop from a market, it was working fine then I put a password on it. And now I have forgotten the password.
I heard there is a response code that I can get, there was a shift tab thing I did which let me enter a response code, I was told to clal toshiba and then would give me a code to reset it.
Is this true?It is not so simply as you think. If BIOS password must be reset it must be done by authorized service and you must also prove that your notebook belongs to you.
As far as I know there are different techniques for BIOS password removal. I dont know which one will be used for your notebook but fact is that they will not tell you this so simply at phone or mail.
You must bring your notebook to the service.
Call nearest service and ask for help. They will explain you how it works. -
Hi, I forgot my password for my mac book retina which I just bought 1 1/2 months ago.
Is there any possibility to reset it? I guess (not sure) the operating system is os x.Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command
until you do. If after seven tries you still do not receive a "Filesystem OK"
message, then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed. -
I forgot the password for my i pad
i forgot the password for my i pad
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I forgot my password for the admin on my macbook
I forgot my password for the admin on my macbook. Unfortunately I can't reset it with my apple-ID either. I want to keep my account since I need the things that's saved there. Anyone who can help me?
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
If you're running 10.7 Lion check this article
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
With 10.8 or 10.9 restart holding the Command and R keys, then from the drop down
of actions, choose Terminal. When Terminal opens type:
resetpassword
and press enter.
You will get a reset password window from which you can select the user you want to reset, the admin account in your case. Type a new password twice, do not do anything with the hint box. Click Save, then confirm you want to do this reset. Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart. -
I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?
The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen. -
I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me
You will have to call Apple and speak to someone in account security.
-
How do I start a new icloud account on my phone if I forgot my password for my current one?
How do I start a new icloud account on my phone if I've forgot the password for my current one
Don't bother ,here is how to recover your password
http://support.apple.com/kb/HT5787 -
I forgot my password for my Apple ID. Anyone have a solution on how to put in a new one without knowing the old one?
ThanksWelcome to Apple Support Communities
You have to reset your password. You can do this in this site > http://iforgot.apple.com -
I forgot my password for my iTunes account and the email that is associated with my iTunes account no longer works. How do I recover my password and be able to change my security questions?
Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers -
Dear all,
I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
I know there are 3 options for digital signature and
System signature with authorization by user ID and password (We use this currently)
Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
User signature without verification
Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
My active directory is based on Windows 2008.
Thanks in advance!!
DheeActually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.
-
I forgot my password for my accounts and a message keeps popping up and won't go away or let me use my iPad, how do I get my iPad back to normal?
Go to iforgot.apple.com to recover the password for the Apple ID.
-
i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?
Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525) -
hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should i do ?
In your case your only solution is to restore it ( see http://support.apple.com/kb/HT1808 ) and you may need to force it into restore mode to do that. This will wipe everything off it and reset it as new, without the passcode. You can then redownload purchased content, buy unless you have a sync'd copy of your contacts and photo's they will be gone.
Maybe you are looking for
-
How to use the namespace with a parser?
I want to use the namespace in my project. For this reason, I use a sample from http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html to test my understanding. The slidesh
-
Report on placed image size and resolution?
I was asked by a client today "does CS4 allow you to create a report of the filenames and the sizes they're used at?" They're getting slides scanned at a higher resolution and the higher the resolution the greater the cost. I guess I need: what show
-
Regarding joining two internal tables
Hi All, Tell me how to use 'UNION' in different ways. Thank you, Rohit
-
Trying to play music almost always makes phone restart
I don't know if this is the right place to post this but its better then not posting. Ever since the latest WebOS Update, 1.4.1 or something, almost every time i try to play music my phone restarts. It happens either when I open the app and attempt t
-
TS3694 Iphone could not be restored. Device could not be found
Iphone could not be restored. Device could not be found