Forgot weblogic admin server password and not able to run to reset it.
Hi Folks,
I forgot my Weblogic 11g server admin account details and now I'm unable to reset the password as well. I tried following the steps mentioned in ORACLE-BASE - Reset the AdminServer Password in WebLogic 11g and 12c but I couldn't execute the below mentioned java command as the required class file is not identifible. could you please assist.
java weblogic.security.utils.AdminAccount newAdmin newPassword .
Thanks
Vachow@
Hi,
To reset the password,please do the following:
1.- Make sure Weblogic Server instance is stopped.
2.- Make a backup of the LDAP folder of the admin server as well as managed servers (you may rename those folders).
3. Set your environment variables by running setDomainEnv.sh (UNIX) or setDomainEnv.cmd (Windows). For UNIX only environments do as follows:
. ./setDomainEnv.sh (Notice the space between the dots)
4. cd to security directory in your instance.
(eg: $WL_HOME/user_projects/domains/base_domain/security)
5. Run:
java weblogic.security.utils.AdminAccount admin_user admin_pass .
Remember to change “admin_user” and “admin_pass” to your need.
Also, don’t forget the period “.” at the end of the above command, it is required.
6. After running the command, the file “DefaultAuthenticatorInit.ldift” will get updated.
7. Delete the following file from “ldap” folder:
cd WL_HOME/user_projects/domains/base_domain/servers/AdminServer/data/ldap
rm DefaultAuthenticatormyrealmInit.initialized
8. Go to folder DOMAIN_HOME/servers/AdminServer/security
9. Edit the boot.properties file and change the password to the value already used on step 5. Do this for all the servers in the domain.
10. Start Weblogic Server (Weblogic Server will encrypt the password for you).
Similar Messages
-
IPhone 5 keeping asking for Apple ID and password and not able to download apps
iPhone 5 keeping asking for Apple ID and password and not able to download apps
I have the same problem and when I enter my pass word the phone goes to close and the little apple comes up then I have to start all over again and it keeps doing it.
-
installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?
You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith. -
Weblogic Admin server restart issue
While restarting Oracle Weblogic Admin server, it is not running after below log.
INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver.
Mar 12, 2015 7:33:07 PM oracle.security.jps.internal.idstore.util.LibOvdUtil pushLdapNamesToLibOvd
INFO: Pushed ldap name and types info to libOvd. Ldaps : DefaultAuthenticator:idstore.ldap.provideridstore.ldap.Hi,
These messages are Info Message Can you please post the complete Error stack for the same
Check the below threads which have similar issue reported
Integrated JDeveloper Weblogic 12C issues
Weblogic server not starting due to OutOfMemory
SOA Suite 12c Integrated Weblogic / Coherence Issue
Unable to run my application
Hope it helps -
Not able to start the weblogic admin server
Hi,
I am getting the error while starting the weblogic admin server of OAM console.
Below is the stack trace of the error
####<Sep 18, 2013 4:47:14 AM IST> <Info> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834234> <BEA-000000> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
####<Sep 18, 2013 4:47:14 AM IST> <Info> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834387> <BEA-000000> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
####<Sep 18, 2013 4:47:14 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834847> <BEA-000000> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
####<Sep 18, 2013 4:47:15 AM IST> <Info> <Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459835526> <BEA-000000> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
####<Sep 18, 2013 4:47:16 AM IST> <Critical> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459836980> <BEA-000000> <Could not decrypt the username attribute value of {AES}MCSBg4hMfpsECc7LXYV6gR52kLO5DHUWyo9I1UZXMaE= from the file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
####<Sep 18, 2013 4:47:16 AM IST> <Critical> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459836980> <BEA-000000> <Could not decrypt the password attribute value of {AES}1hgzo9/RGaCoWQyFXIJEbYMqmz5gg9LQzjQ/J6DxbQM= from the file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849081> <BEA-000000> <Server state changed to STARTING>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WorkManager> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849088> <BEA-000000> <Initializing self-tuning thread pool>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849138> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <Log Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849208> <BEA-170019> <The server log file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Log Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849213> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Diagnostics> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849260> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849305> <BEA-002622> <The protocol "t3" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849305> <BEA-002622> <The protocol "t3s" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849306> <BEA-002622> <The protocol "http" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849306> <BEA-002622> <The protocol "https" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849307> <BEA-002622> <The protocol "iiop" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849307> <BEA-002622> <The protocol "iiops" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849308> <BEA-002622> <The protocol "ldap" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849308> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849310> <BEA-002622> <The protocol "cluster" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849311> <BEA-002622> <The protocol "clusters" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849313> <BEA-002622> <The protocol "snmp" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849314> <BEA-002622> <The protocol "admin" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849314> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <RJVM> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849325> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address :7003
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Sep 18, 2013 4:47:29 AM IST> <Critical> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849347> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: weblogic.security.internal.encryption.EncryptionServiceException
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:139)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:187)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849410> <BEA-000365> <Server state changed to FAILED>
####<Sep 18, 2013 4:47:29 AM IST> <Error> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849410> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849411> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849412> <BEA-000236> <Stopping execute threads.>
Kindly help me to solve this issue.
Is anyone had faced this issue.....Hi,
I had tried by putting the username and password in boot.properties but we are getting the same issue.
we tried by editing the config.xml file of the domain.
i.e. by
Before: <credential-encrypted>{AES}b3I7UhWtRyj4DuKMIDVtW4Ln2nzH+HiYRhhQw1H2qpU0qJMOaDlK8iFZ+LvlJu+iZs6pptFJgWz8ryyudL1Zyvf00Rg11z9Iib7hoDC8covMFuig8wx7iOGK88zeKH7U</credential-encrypted>
After: <credential-encrypted>MyCredentialInPlainText</credential-encrypted>
and restarted the admin server but shows the same error.
kindly suggest us... -
WebLogic admin server not starting.
Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom) -
I forgot my password for my iTunes account and the email that is associated with my iTunes account no longer works. How do I recover my password and be able to change my security questions?
Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers -
I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?
See my answer to your previous duplicate question. What happened when you tried my answers?
LN -
Cloned OMS - WebLogic Admin Server not available....
Greetings,
We are working our way through an active active R4 OMS setup, and we just successfully cloned oms1 to oms2 via cloud control, and executed the post install steps. We now need to access each of the OMSs WebLogic Admin Server Console to confirm LDAP settings, and the oms2 WebLogic Admin Server Console is unavailable. The oms2 clone has the same WebLogic Admin Server details as oms1 (see below).
Is that by design, i.e. only one WebLogic Admin Server Console with two load balanced OMSs?
Which files do we need to edit on oms2 to get oms2's WebLogic Admin Server on-line?
oms1:
/u01/app/oracle/product/middleware_r4/oms/bin/emctl status oms -details
WLS Domain Information
Domain Name : GCDomain
Admin Server Host : oms1.mastec.com
Admin Server HTTPS Port: 7102
Admin Server is RUNNING
oms2:
WLS Domain Information
Domain Name : GCDomain
Admin Server Host : oms1.mastec.com
Admin Server HTTPS Port: 7102
Thank you,The WLS admin server only exists on the first OMS host. Usually an SLB is used for load balancing.
For information on HA (High Availability) solutions, see:
http://docs.oracle.com/cd/E24628_01/install.121/e24089/ha_intro.htm#EMADV9611
Regards,
- Loc -
I forgot my Iphone4's password (letter not number). Can I use my apple ID and password in anyway to get back into my iphone4???
No you will need to know your passcode to unlock your phone.
-
I forgot my iphone 4 password and the device is disabled but it doesn't let me restore it on a different computer that it is not synced with
See: http://support.apple.com/kb/HT1212. You will have to restore the phone using iTunes and set it up as new.
-
Changing the weblogic admin user password
I have faced an issue in reseting weblogic admin user password. Following are the steps i have executed in sequence.please help to understand why it is not working this way
I have 2 managed instances running on two separate computers.
`Step 1.` shutdown the admin server instance ( i did not shutdown the node manager and other 2 manage server instances
`Step 2.` Set the environment variables
`cd $DOMAIN_HOME/bin`
. ./setDomainEnv.sh
`Step 3.` then executed the command below to create the new password
cd ../security
mv DefaultAuthenticatorInit.ldift oldDefaultAuthenticator
java weblogic.security.utils.AdminAccount weblogic new_password .
`Step 4.` backed up existing `boot.properties` file and created a new file. Also backed up data directory of admin server. created a new `boot.properties` file with following configuration
with plain text username(weblogic_admin) and password (new_password).
cd ../servers/AdminServer
mv data data_old
cd security/
mv boot.properties oldboot.properties
Step 5. Then i restarted the admin server. admin server is restarted successfully and i was able to login the admin console with my new username and password. Issue came when i try to shoutdown the admin server. when i execute sh stopWeblogicAdmin.sh , it will through following exception. But , if i kill the admin server process , then i am able to start the admin server with out any problem. and i am able to login to the server also. I am also able to stop and start manage server instances through admin console. But why it is failing only when i try to stop.could anybody help me on this
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://jipsl13t:12001 with userid weblogic_admin ...
This Exception occurred at Fri Jan 18 12:20:09 GMT-00:00 2013.
javax.naming.AuthenticationException [Root exception is java.lang.SecurityException: User: weblogic_admin, failed to be authenticated.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:42)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:682)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx4.connect$1(<iostream>:16)
at org.python.pycode._pyx4.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(/product/jip/jipsl11t/wls/eni132_domain/shutdown.py:6)
at org.python.pycode._pyx15.call_function(/product/tsm/jipsl11t/wls/eni132_domain/shutdown.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: java.lang.SecurityException: User: weblogic_admin, failed to be authenticated.
at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServiceImpl.java:116)
at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Problem invoking WLST - Traceback (innermost last):
File "/product/jip/jipsl11t/wls/eni132_domain/shutdown.py", line 6, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : User: weblogic_admin, failed to be authenticated.
Use dumpStack() to view the full stacktrace
Done
Stopping Derby Server...
Edited by: user8643895 on Jan 18, 2013 9:28 AMHi,
This issue was occurring because stopWebLogic.sh was picking the username and password from properties user config files in user's home directory: username-WebLogicConfig.properties, username-WebLogicKey.properties.
If the credentials for weblogic server are changed then new user config files should be created, if these are not created then stopWebLogic.sh will pick up the old credentials and hence fail.
Please refer the following document for information on user configuration files:
http://docs.oracle.com/cd/E21764_01/web.1111/e13813/reference.htm#WLSTC430
Connecting to the server after deleting username-WebLogicConfig.properties, username-WebLogicKey.properties resolves the issue as it forces the script to use the credentials provided by the user while running stopWebLogic.sh
There are two ways you can resolve this issue:
1) Create new user config files with the correct credentials as explained in the following document:
http://docs.oracle.com/cd/E21764_01/web.1111/e13813/reference.htm#WLSTC430
Or
2) To force the stopWeblogic.sh script to use credentials provided by the user while running the script follow these steps:
In the stopWeblogic.sh file use the following connect command:
connect(userConfigFile='',userKeyFile='', url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')instead of:
connect(${userID} ${password} url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')Hence in the stopWebLogic.sh script replace:
echo "import os" >"shutdown.py"
echo "if os.environ.has_key('wlsUserID'):" >>"shutdown.py"
echo " wlsUserID = os.environ['wlsUserID']" >>"shutdown.py"
echo "if os.environ.has_key('wlsPassword'):" >>"shutdown.py"
echo " wlsPassword = os.environ['wlsPassword']" >>"shutdown.py"
echo "connect(${userID} ${password} url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')" >>"shutdown.py"
echo "shutdown('${SERVER_NAME}','Server')" >>"shutdown.py"
echo "exit()" >>"shutdown.py"with:
echo "import os" >"shutdown.py"
echo "if os.environ.has_key('wlsUserID'):" >>"shutdown.py"
echo " wlsUserID = os.environ['wlsUserID']" >>"shutdown.py"
echo "if os.environ.has_key('wlsPassword'):" >>"shutdown.py"
echo " wlsPassword = os.environ['wlsPassword']" >>"shutdown.py"
echo "connect(userConfigFile='',userKeyFile='', url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')" >>"shutdown.py"
echo "shutdown('${SERVER_NAME}','Server')" >>"shutdown.py"
echo "exit()" >>"shutdown.py"
Regards,
Kishore -
Administrator Login & Issue with Weblogic Admin Server Console
I recently applied a PeopleTools patch to a test environment. I will be doing this to production soon, and as I was going through my screenshots of what I did in test, I ran across an area that may cause me an issue when I apply it to production.
There is a screen which prompts you for the administrator login and password for the weblogic domain. I wasn't sure of this when I did it in test, but in the PeopleTools install doc, it said the default is system/Passw0rd
This worked fine in test. However, the person who set this up in production may have used a different password. I don't want to get halfway through the patch and have to abort because I don't know the password.
I did some research and read there was a file with this info. I think it was boot.properties, but it was encrypted.
I then started the Weblogic Admin Server Console in test and was able to login with system/Passsw0rd so that verified a way of confirming the password in test.
I tried to do the same in production, but the Weblogic Admin Server Console page does not come up. The webserver is running, and if it wasn't, my phone would be ringing. Why does the console not come up?
However, the screen that comes up during the patch that prompts you for this asks you to enter your password, and re-enter it on the next line, so maybe its setting the password, not verifying that you know it. Is this true, I could make it whatever I want?
The WebLogicAdmin_weblogic.log file has not been updated in months. This may have been when we did the last upgrade.
Can you tell me how to determine/verify this password?
Thanks,
RogerI'm not sure if there's an easy way to verify this. If I'm not mistaken you'll have batch file called startweblogicadmin.bat in the bin directory. You have to start this to get the administrator console running. It will be running on port :9999 by default if you haven't changed this.
-
Weblogic Admin server - Configuration/Server Start/Arguments ignored?
Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain> -
Weblogic Admin Server Doesnt start.
I have installed Oracle 11g, RCU (WCC 11.1.1.6), Web Center Content 11.1.1.6 (C:\Oracle\Middleware\Oracle_ECM1) and created a domain for Content and was trying to restart the Weblogic Admin Server (C:\Oracle\Middleware\user_projects\domains\WC_Domain6\bin).
I get the below error:
'C:\Oracle\MIDDLE~1\Oracle_ECM1\ucm\idc\bin\\Installer -noCommEnv -platform win3
2 -dumpFormat %s=%s -show IDC_NATIVE_PATH' is not recognized as an internal or e
xternal command,
operable program or batch file.
Content Server provided no native path information in idcCommEnv.cmd.
'C:\Oracle\MIDDLE~1\Oracle_ECM1\ucm\idc\bin\\Installer -noCommEnv -platform win3
2 -show NativeOsUtils_classpath' is not recognized as an internal or external co
mmand,
operable program or batch file.
The directory name is invalid.
Any help is greatly appreciated. Thank you.I have a batch file i create that will start everything up. I don't think i've ever seen your error, but the admin server can be called using the startWeblogic up one dir from Bin, i dont know if it makes a difference but i've always used that one. Copy and paste below into a text file (update your paths and urls accordingly), rename to a .bat and you should be able to start everything at once
@echo off
START "ECMAdmin" C:\Oracle\Middleware\user_projects\domains\IMTST\startweblogic.cmd
TIMEOUT 100
START "NodeManager" C:\Oracle\Middleware\wlserver_10.3\server\bin\startNodeManager
TIMEOUT 15
START "soaserver1" C:\Oracle\Middleware\user_projects\domains\IMTST\bin\startmanagedweblogic soa_server1 http://IMTSTipm01:7001
START "UCMserver1" C:\Oracle\Middleware\user_projects\domains\IMTST\bin\startmanagedweblogic UCM_server1 http://IMTSTipm01:7001
TIMEOUT 150
START "IPMserver1" C:\Oracle\Middleware\user_projects\domains\IMTST\bin\startmanagedweblogic IPM_server1 http://IMTSTipm01:7001
Maybe you are looking for
-
BW 3.x upgrading to Oracle 9.x
Hi, All. Has anyone completed (or is anyone planning to) upgrade Oracle from 8.1.7 t0 9.2 of an existing SAP BW 3.0B or 3.1C system?
-
Why are there no 1920 X 1080 Choices in the Sequence settings
I watched some videos trying to understand what is the best speed and frame size to use when creating a video. Basically Lynda.com they are saying 1920 X 1080 is full resolution and this is the desirable setting for outputting best resolution. The
-
Alternative Option in Smartform
HI, what is the use of ALTERNATIVE Option in Smartform? Regards Sandeep
-
Lightswitch HTML Sharepoint App: Sharepoint List error in screen
I am able to connect to add SharePoint as a data source and select lists to include in the solution. However when I run the application in debug mode the screen showing the list shows an error(see below). When the app is published running in an azure
-
I can't open iPhoto. Message reads "Your Photo Library is either in use by another application or has become unreadable".