Forgot whether automatic updates are included when you update Flashplayer. Update was fine, just didn't see where to click to get automatic updates.
Forgot whether automatic updates are included when you update Flashplayer. Update was fine, just didn't see where to click to get automatic updates. Please advise whether I need to do anything or not. Thanks.
If you are using Windows:
You must be logged in from an Administrator account not a Standard account.
Click on START, then Click on CONTROL PANEL, then be sure the View is set to Large Icons not Category.
Click on the Flash Player Icon. The Flash Player Control Panel should come up.
Click on the UPDATES tab. Now you can verify or select automatic updating.
Similar Messages
-
I updated the latest version of iTunes today and it has a new look. That's fine but I can't see where to click to synch my ipod after downloading music or podcasts. It was always easy.
It might make it much easier on you if you enable the sidebar in iTunes. Launch iTunes and go to View>Show Sidebar. With iTunes set up like that, it should look a lot more familiar to you. You can select your device name under the devices heading and then go through all of the iTunes panes by clicking on them at the top of the iTunes Window.
My screenshot shows my iPad, but it works the same way with an iPod. -
In the 20.0.1 update, I noticed when you accidentally close your window your browsing it automatically closes your downloads. Previous versions when you close your window and reopen Firefox your downloads are unaffected until your downloads are finished or you cancel it yourself. Is there a setting I can set that my downloads are unaffected when I close my window.
You can set the browser.download.manager.quitBehavior pref to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior
*http://kb.mozillazine.org/about:config -
How do you updated CS5 Extended when you keep getting a message to close the program but it is close
How do you updated CS5 extended when you keep getting a message to close the program but the program is already closed? I have tried to do the update when I first turn the computer on, go directly to Photoshop, go to update and click on that, get new screen, close Photoshop, and I still get a message to close the already closed program. I believe I have to open Photoshop to get to the update area, so I don't know how to get around this issue. I hope someone can help me.
(I use win8, 64 bit)
Thank you in advance to all who answer my request for help.
AnnThank you for answering. However, when I opened the Task Manager and looked at all the processes that were running, the only things running were the Task Manager and the browser. None of the Photoshop programs were running. So, do you have any other suggestions?
-
How many sign-on's are included when I purchase Photoshop and Illustrator? Can more than one person have access on separate computers?
You have 2 activations and the licenses is tied to you personally and you only. You cannot let other people use your software (unless they are family).
Mylenium -
just updated to ios7. when i add events to my calendar i don't see a dot or the event on my phone, but it shows up on my computer. why are new events invisible on my phone?
Are you sure .mov files worked on the iPhone without a third part player? I'm just not sure...
Try these instructions from Apple:
Convert a video to work with iPhone: Select the video in your iTunes library and choose Advanced > “Create iPod or iPhone Version.” Then add the converted video to iPhone. -
Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.
-
Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??
I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.
-
I'm having 10.8.3 and today 18-Apr Thursday I had installed latest java 7 update. Now when ever I test java page it just redirects the page to Java download on both Firefox and safari. I tried deleting the cache from Java Sec Panel - temp ile but still same prob.
Make sure that the plugin is not automatically disabled in Firefox:
Clinton -
With the installation of IOS5 on ipfone4 battery started to run out quickly. I in turn cut off thedifferent functions, and attention when you disable geolocation battery was used asfuktsionirovat
When in Unix ( i guess u are using Oracle Application server installed in unix)
the owner of the ias in unix is used to run this.
Its usually oracle. try to login with oracle /the user who owns the ias and run the script
Rajesh Alex -
I'm trying to update my ipod iOS...when it says to go into "Settings/General/Software Update", I don't have a "Software Update" option in my General category. Is there somewhere else I need to look in order to get iOS updates?
Updating from the ipod itself is a feature of ios 5 or later.
You would need to update as always. Turn on computer, open itunes, connect ipod.
The first gen ipod will only go to 3.1.3 -
When you download iTunes material, does iTunes record the IP used where it is being downloaded to? I am trying to track a lost/missing IPOD Touch and want to know if they have that data. It was left on a small street and someone has found it and has been hacking into my account by resetting my password. They took about 41+ dollars from my account. I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.
No. From the second link below.
"Apple does not have a process to track or flag lost or stolen product
- If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
- Report to police and change the passwords for all accounts used on the iPod.
- Apple will not help
Reporting a lost or stolen Apple product -
I get an unable to contact server error when i try to sign in..I don't see where there are outages.
I am also having this problem.
I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error. -
hello
The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try to open it is no use. OS Y 10.10.2 (14C1514)Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
IF statement inserts extra line.
I am having problems with IF statements inserting extra lines; POH_VENDOR_NAME<?if:POH_PO_NUM != ''?>(POH_PO_NUM)<?end if?> Returns: Consolidated Supplies (1085) Instead of: Consolidated Supplies (1085) I have tried using CHOOSE but get the same resu
-
How do I stop iTunes from highlighting 'Now Playing' song
How do I keep iTunes from switching to and highlighting the 'Now Playing' track each time it switches tracks? It's quite annoying when scrolling my library or syncing a product with certain music and it then switches from Z to A as that is now the cu
-
Overlap Buttons? Can you select 2 objects with one click?
Hi I am trying to create a menu of a map for a client. They would like a text list of cities down one side and also dots over each city on the map. I have set the highlite groups to change the colour of the text but I would like to also set the menu
-
Generate PO from Bid Invitation
Hi Team, After receiving and Accepting Bid, I click on Generate PO. This will automatically generates the PO and a PO output will be created. Here is the question: I do not want the PO to be automatically generated. After the Generate PO button is cl
-
Hello I changed a vi that i was using by mistake. There was a device name going into the vi. I opened up the vi and i deleted the device name control and when i tried to put it back it wouldnt work. Now i cant input the device name to the vi and it i