Forgot XSKey, need to work 1 day - any suggestions?
Hello all,
I forgot my XS key, I am away from home, I need to spend another day completing the end credits. I am an idiot. Accepted.
Is there any way I would be able to launch Logic Pro for a trial period, which would get me by? I only need a day. I ask because I am bummed, and I remember when I installed Logic Pro, there was a trial period that would allow you to run the app for a limited time without the XS key. However, I do not have my Logic install discs. Though I think this route is hopeless, any suggestions?
Luckily, I have the Logic Express trial downloaded, and I have DP 4.6 with Altiverb & PSP delays. Unluckily, I have spent a lot of time organizing a bunch of stuff in Logic, and I'm in a Logic state of mind. Luckily, this could force me to simplify -- I do have DP 4.6.
Thanks for your suggestions,
Danny
Dual 2.3 Mac OS X (10.4.5)
the only suggestion is the Express trial, but you already took care of that.
though I do like Djokes idea (a BIG longshot, but not enitrely unrealistic)
who'd-a-thunk our resident funny guy was a hopeless romantic.
Similar Messages
-
So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?
Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.
-
iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?
Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]]. -
Just upgraded to Office 365. Reinstalled my Acrobat 7.0 standard. All I need to do is convert office files to pdf but it wont work. Any suggestions?
Hi,
Acrobat 7 is not tested with Office 365. However your PDF Printer is working fine then you can print your office files to it.
Regards,
Anoop -
I have downloaded and installed the iPhoto tool to update so my pictures transfer over, but it's still telling me I need to update. Any suggestions why this isn't working for me? I have a Macbook Pro.
You have to download and RUN the iPhoto library upgrade - then launch iPhoto - If you had iPhoto '08 or earlier (version 7.x.x) - the upgrade is installed in the utilities folder of your Applications folder
LN -
I dropped my phone in the water and now it is not working. Any suggestions?
I dropped my iphone in the water and now it is not working. Any suggestions?
Turn it off and put it in a bag of rice for 5-7 days. You may get lucky.
-
I'm trying to update iPhoto 7.1.5 on my old iMac (running 10.9.5) to current versions so I can get my photos onto iCloud to access from my iPad. I can't seem to find an upgrade route that will work? Any suggestions?
For Mavericks you need to upgrade to iPhoto 9.5.1.
You cannot buy this version from the AppStore, since the current version is iPhoto 9.6, and that requires Yosemite. The easiest route for you would be to upgrade to Yosemite. Then you can simply buy the newest version of iPhoto from the App Store and can use iCloud Photo Library (iCloud Photo Library beta FAQ), once it has been release for the Mac as well early next year.
If you want to stick with Mavericks, you'll have limited iCloud features, only the Photo Streams (iCloud: iCloud Photo Sharing FAQ), but no iCloud Drive (iCloud Drive FAQ) and iCloud Photo Library. And to upgrade iPhoto you need to buy an iPhoto '11 installer. It comes as part of iLife '11. You can try to buy a boxed version from Amazon or try to find it at eBay. Once installed on Mavericks, download the iPhoto '11 updaters from the apple Support Downloads page. -
I dropped my iphone 5S in water and its not working. Any suggestions?
I dropped my iphone 5S in water and its not working. Any suggestions?
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?
Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
boot method: static
IP address: the address you chose in 7)
mask: 255.255.255.0
gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
click +
in the add menu click IP
enter your IP (from step 7)
make sure the Protocol is IPP
Name the printer and set its location
Go to Use field, in the pull down menu select "Select Software"
Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
Click +
Select your printer
Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done. -
I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.
To Mickey: I got the 2 RAR files into one directory, extracted the part1.rar file, and in that new folder there is a file called start.html. I opened this, and followed the links on the right, from "Welcome" to "Getting Started". After all this I had the SAP Management Console, as well as the Database Manager applications created. You will find the specific instructions for setting up the MaxDB under the "Getting Started" link. After setting up the Database Manager you have to start it up with a user-id and password which was created during the set-up, and specifically link the database to the NSP system. I seem to remember that this didn't work at first, because the Database Manager shortcut does not run the program as an administrator. So run it as an administrator! I altered the shortcut's properties under the shortcut/advanced so it will always run the program as an administrator, and haven't had any problems - once you have done the "Add" procedure you may never need to re-visit the database manager.
Edited by: Paul Wright on Jan 8, 2009 2:03 PM -
I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
any suggestions?weird.
It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
Thank you so much for your prompt replies.
It's past midnight here so I'd better get some rest...
Good night captfred! -
I transferred my files from a G4 to a new macbook pro, but I can't access my old songs in itunes. I clicked on library in itunes and get the mac page to access mp3 and acc files but it doesn't work. Any suggestions?
They maybe corrupt, try transferring again from the g4. If iTunes is giving you an error then you need to authorize your computer with the same iTunes account as previously. Also, you could try exporting your iTunes library via iTunes on the g4.
-
I have just downloaded the latest operating system onto my 4S. I now can't get notifications on Whatsapp or Viber. Message says to connect to itunes but I can't seem to make it work. Any suggestions?
You need iTunes version 11 for iOS 7.
iTunes version 11 requires OS X 10.6.8 or later...
Click on the Apple icon.. Top left in Finder...
> About this Mac > Version...what does it say? -
Hello! I have an older 20G ipod where the "circle" to scroll no longer works! any suggestions??
Hello! I have an older 20G ipod where the "circle" to scroll no longer works! any suggestions??
Considering the age of the iPod, it's likely been through quite a bit of useage and needs to be replaced. There really isn't much else you can do to troubleshoot this issue.
If you would like to have it repaired, there are several 3rd party repair companies out there who can do the job at a pretty decent price.
B-rock -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.
Maybe you are looking for
-
Ive got an apple tv, and a new hd projecter. I've now got a huge lovely picture on the wall, but I've zero sound.... The projector has no output for sound, and is conected by hdmi...which leaves me with one option. Using the optical out from apple tv
-
Af:selectManyChoice and value separator
Hi, I am using JDeveloper 11.1.1.4 and ADF-BC in my project. I am using af:selectManyChoice in one of my pages. By default af:selectManyChoice displays selected values are semi colon separated(;). can this value separator semicolon be customized by a
-
[SOLVED] systemd user unit for lsyncd
After following the the systemd/User - Basic setup wiki article I have successfully setup user services for systemd. I've also setup a systemd user "unit" to run lsyncd. The user unit appears to start successfully based on the unit status shown bel
-
After update, several problems (battery, factory recovery, Message icon)
After Froyo update, I found out several problems. 1) Battery. It drains two times faster than before. My one does. My wife's one is worst (maybe 3-4 times faster and also the phone is hotter than mine). 2) Factory Recovery option I could not find any
-
hi all, I've done a decent research and testing on how to create, test, deploy, publish PORTLETS, unfortunately this is far from enough from what my goals should be. The point is: 1) how can I add business login to portlets ? Until now i've built j2e