Forgotten Blackberry ID.. A little more difficult than a email reset..

A little background... About a year ago I swaped from a different provider to my current provider Optus and have been using Appworld just fine with my old providers *@three.blackberry.com email address which I used as my Blackberry ID for AppWorld and just last week I somehow forgotten my password while overseas and managed to Wipe my device trying to figure out my AppWorld password. Obviously the password reset to email will not work as that address no longer exists. Does anyone know how I can go about retrieving my account details from RIM? I have a few purchased apps under it and BBM contacts.
Regards,
Michael

Similar Messages

Is CLAD real much more difficult than CLAD on-line free demo?

I am about to give CLAD offline (there is no testing center here and a NI representative would be coming to take the CLAD exams of four of us). We / I have practiced the free on-line version of CLAD exam at NI site. I have heard that the real exam is much more difficult. Is this true? What is the diference between the two? (Like passing marks etc).
Thanks for the help!

The proctored CLAD exam is slightly more difficult than the on-line version. Some of the questions from the on-line exam were on the test as were some of the questions from the example exam. If you handled the material in those two exams well, you should pass. To get 70%, you can get 12 out of the 40 wrong. My feeling while taking the test was that there was no way I had 12 wrong because there are enough easy questions. It's a good test because it forces you to learn some trivial details you may not have paid attention to before.

Having trouble accessing my and my wifes yahoo accounts 5X's more difficult than it was on iternet explorer. what be done

I switched from Internet Explorer to Mozilla Firefox for my internet browse. My wife and I have separate email accounts with Yahoo. With Internet Explorer all we needed to do was to switch from one Yahoo email account to the other was sign out of one account and sign in other the other account. Now with Firefox we have to go through a lot of different steps and is much more difficult which may make me decide to switch back to Internet Explorer which I would rather not do.
Please advise, thanks, Dean

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

Fresh Install of Mtn Lion on new SSD More Difficult Than I Thought

Today I installed my brand new 512GB SSD from Crucial. Had wanted a fresh install of Mtn Lion, but that turned out to be difficult. As a result, I resorted to a restore of my most recent Time Machine backup, which completed just fine.
Changing out the drives was simple and quick. I then inserted my formatted USB Drive, held down the Option key, and re-started my laptop. So far so good, and I was asked which drive I wanted to install Mtn Lion on, but the problem was that my new SSD was not listed as one of the options, so I took out the new drive and re-inserted my old SSD.
When I ordered the new drive, I ordered the one that came with a Data Recovery Kit, which included a CD and a nifty little adapter that attached to your drive, with a short USB cable on the other end. I attached the adapter to the new drive, plugged in the USB end, and then opened Disk Utility. I then realized that the new drive was never formatted, so I thought I had found the problem as to why the new drive never showed as an option when I wanted to install a fresh copy of Mtn Lion. I quickly reformatted the new drive, then re-installed it in my laptop, then re-started and held down the option key. Still, the new drive was not showing as an option to install Mtn Lion.
However, it did show as an option if I chose to install a Time Machine backup, so that is what I did, and the restore process was quick and effortless. In the end, I have a new 512 GB SSD and am happily continuing with my computing. Still, I have to wonder why the new drive was never available to me as a destination option for a fresh install of OSX 10.8.2.
Any ideas if I missed something along the way? Why did the new SSD not show as an option for a fresh install?
 Nick Andriash 
[email protected]
17" MacBook Pro, 2.3GHz Intel Core i7, Memory 16 GB, OS X 10.8.2
AMD Radeon HD 6750M 1024 MB
iPad2 WiFi & 3G, 64GB
iPhone4S 32GB

Drive Preparation for Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select the SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is done quit DU and return to the main menu. Select Reinstall Lion and click on the Continue button.

I need help with iTunes 7, but its a little more complex than that

I share a computer with my brother, which makes my situation a little trickier than usual. You see, I want to install the new version of iTunes, but when the setup was done, and it as ready to install, an error occured. I forget the number of the error but it said that I had not given it verification of ownership and that the program could not be stopped. i have a vague idea of what i have to do, i have to wipe my comp clean of iTunes and then download the new version. The problem with that is that my brother is an arrogant idiot who has little patience for anything that he doesn't understand. That's why I'm reluctant to wipe iTunes clean. I know that we can just save our iTunes library in some folder or on a disk, but it'll take me a while to get it through to him that no harm will come. That being, does anyone know how to wipe iTunes off my account only, and then install iTunes 7 on my account only. I got my iPod video for X-mas and its proven to be utterly useless so far. I really hope that one of you can assist me because otherwise, i'll have to deal with a lumbering b

a few questions before proceeding.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
or are you seeing a brief "flash" of the itunes license screen (and then nothing)? if so, do you also see similar behavior when you try to launch your QuickTime?

My mac book pro taking a little more time than usual to load up pages. what can i do?

Thanks

This helped to speed up my copy of pages.
open disk utility and click verify disk permissions and repair disk permisions.
Tyler

ClickTAG: More difficult than I'm making it?

Hello awesome forum folks.
I've created plenty of banner ads in my time but am having trouble with my first AS3 clickTAG code.
import flash.events.MouseEvent;
clicks.addEventListener(MouseEvent.CLICK, boomShaka);
function boomShaka(event:MouseEvent) {
var request:URLRequest = new URLRequest(clickTAG);
navigateToURL(request, "_blank");
This is the code directly from the creative requirements of the website I'm making the banners for. It errors out with:
1120: Access of undefined property clickTAG.
If I comment out 'clickTAG' the rest of my actionscript functions correctly. I've been stumped and checking around for two hours now. Any help would be appreciated.
Message was edited by: MattOverwine

Hi
1120: Access of undefined property clickTAG.
Look at your error message again. clickTAG is undefined...Flash does not know how to cope
with the word "clickTAG"..
You must define it and assign a value before using it.
example:
var clickTAG:String = "TheWebPage.html";
var request:URLRequest = new URLRequest(clickTAG);
navigateToURL(request, "_blank");
Best regards
Peter

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

More capability than available in iDVD

I would like a little more capability than is available in iDVD -- more themes; more transitions; etc. What is the next step up in software? Also is there something that burns DVDs faster? Being a grandparant, I just burned a DVD with movies and photos with audio and iDVD took almost 90 minutes to burn the first copy.
iMac Core Duo; 20 inch Mac OS X (10.4.8) 2 gig RAM

Bill:
To make creating multiple copies easier and quicker first do a Save as Disk Image with your iDVD project. That takes the most time in the process and this way you only have to go thru it once. You can mount the disk image and play it with DVD Player to check for any errors before committing to disk. To burn use Disk Utility as outlined in Burning a disk image file on a CD or DVD in Mac OS X.
Do you Twango?

A little more than Pages

I am new to mac. I have done lots of picture and label formatting in word. I am in need of a program that will allow me to do a little more than what Pages/(or even Word) can provide. I would like to construct and print 'labels' pictures with overlapping complex formatted text, upside down on irregular sized paper. I think Photoshop would do the job...?. Is there something else in between (Pages and Photoshop)? Any recommendations would be appreciated for this application.

saupau,
Welcome to Apple discussions.
If I'm understanding you right, you want to have picture captions that you can rotate and otherwise manipulate. If that's correct, I'm pretty sure you can do that in Pages by putting your captions in text boxes. You can rotate one by selecting it, then clicking on the Metrics inspector and using the rotation wheel. You can overlap them by clicking on the Wrap inspector and unchecking +Object Causes Wrap+.
Is this what you need to know?
-Dennis

E72 - Possible to have more than 2 email accounts ...

E72
So is it possible to have more than 2 email accounts shown at the home screen?
Currently one is set as primary and the other as secondary.. I have 4 email addresses I want shown at the main screen..
Please help.

jane999 wrote:
Basically I want to share A1 with somebody else and we both use yahoo email. So I need to sign out before she can sign in. Any way to do that?
Thanks in advance for any help!
You didn't specify whether you are using the "official" Yahoo mail app, or some other email application like K-9. But either of those allow for the specification of multiple email accounts, and you don't even really need to sign in/out. Once you set up the accounts within the app, just select the email account that you want to view. It might be a little more problematic if you want to prevent each other from being able to see the other's email, however.

Digital signatures getting more difficult

I'm sure there are good reasons for the changes, but from my viewpoint digital signatures in Acrobat are becoming less convenient with each new version I try.
I make extensive use of invisible signatures, with a number of people required to invisibly sign each document. In Acrobat 5.05 it was a breeze, either using a menu option or the dropdown in the signatures panel (my preferred method). Deleting a signature field was equally convenient. Just right click the field and delete it.
In Acrobat 7, the menu and dropdown options disappeared and one has to go through a bunch of screens to get there. Not terrible, but less convenient. Also, documents created using Acrobat 5 or 7 could be signed using either version as long as the document was created using Acrobat 5 (PDF 1.4) compatibility. For deletion, signature fields must be cleared first, and only then can they be deleted. In both cases, creating invisble signatures and deleting signature fields, there are more steps in Acrobat 7 than in Acrobat 5.05. I can live with it, but it seems like reverse progress to me.
Now I am trying to help my boss use Acrobat 10 to invisibley sign documents created using Acrobat 7 and already invisibly signed by others using Acrobat 7 and Acrobat 5.05. If there's a way to do it, I can't find it. I suppose I could create a blank signature graphic, but that seems silly. Neither can I find any way to delete signature fields. I can clear them, but not delete them.
I'm guessing that the changes to digital signature functionality have something to do with making signed PDFs more secure and more difficult to tamper with, but I find it hard to believe that can't be accomplished without losing so much functionality.
I need to be able to have multiple invisible signatures and the capability to remove signature fields, and I need to be able to do it in Acrobat versions 5.05, 7, and X for documents created using any of those versions. If anyone knows how it can be done, please let me know.
Thanks.

What viewer are you using for showing the PDF?

Anyone finding it more difficult to type words on the iPhone4 vs iphone3?

We've recently migrate about ten folks from the iPhone3 to the iPhone4.
Getting feedback that it is more difficult to accurately type words on the iPhone4 than what was experienced on the iPhone3. Some of the direct comments are listed below. Is anyone seeing the same issues?
"It's way harder to type correctly on this new phone? I'm having a terrible time getting words spelled right. I have to slow way down to even come close."
"Truthfully, I type three word and look at my screen and it's three wrong words with no spaces between them. If i slow down, stare at the screen and type with deliberately, like when I first got an iphone a couple years ago, I can get it write, mostly. If I type anywhere near normal, like I did on my last phone, it's just a jumble of letters."

Yes, and I think I know what the problem is. The iPhone 4's touch screen is more sensitive than the previous models. The 3Gs' touch detection was spot-on IMHO. The i4 is more sensitive and to confirm this yourself just slowly get closer and closer to screen over button and you will notice that it will register a click and/or touch before your finger makes contact. I am not 100% positive but this could be adding to the Proximity Sensor woes as well. Maybe not causing it but definitely making it worse. I hope Apple can turn down/tune the capacitance touch screen a bit along with the prox-sensor fix in next release.
Message was edited by: JPBOSS

Defining more parameters than a query needs

Hi.
When I run the following code, I get the error "ORA-01036: illegal variable name/number" .
The problem is that I currently define more parameters than the query needs. Thats because I don't know how many bind variables the query uses, and I would not like to parse the query ...
I don't understand why I have to define exactly the same number of parameters, and in the exact order ... It doesn't make sense. As bind variables have names, there should be no problem passing more parameters or parameters in a different order: the binding should be done by name...
I'm currently using Oracle10g, ODP.NET and .NET Framework 2.0.
I would appreciate any help ...
Thank you.
Ricardo Coimbras
===== BEGIN VB.NET CODE =====
Sub Execute_Query(ByVal SqlString as String)
Dim ObjCmd As OracleCommand
Dim DataAdap As OracleDataAdapter
Dim outDsCorpo As DataSet
Dim Constroi_Conn_String_Oracle As String
Dim mObjConnOracle As OracleConnection
Constroi_Conn_String_Oracle = "User ID=uuu" & _
";Password=ppp" & _
";Data Source=bd" & _
";Pooling=false"
mObjConnOracle = New OracleConnection(Constroi_Conn_String_Oracle)
mObjConnOracle.Open()
ObjCmd = mObjConnOracle.CreateCommand()
ObjCmd.CommandType = CommandType.Text
ObjCmd.CommandText = SqlString
ObjCmd.Parameters.Add("p1", OracleDbType.Char, 3, "001", ParameterDirection.Input)
ObjCmd.Parameters.Add("p2", OracleDbType.Char, 3, "001", ParameterDirection.Input)
DataAdap = New OracleDataAdapter(ObjCmd)
outDsCorpo = New DataSet()
DataAdap.Fill(outDsCorpo)
GridView1.DataSource = outDsCorpo
GridView1.DataBind()
DataAdap = Nothing
ObjCmd = Nothing
mObjConnOracle.Close()
mObjConnOracle.Dispose()
mObjConnOracle = Nothing
End Sub
Execute_Query "select * from map.t_mapa_def where mapa_def_cod = :p1 order by mapa_def_cod"
===== END VB.NET CODE =====

Hi,
BindByPosition is the default behavior as per the docs, and you can change that by setting cmd.BindByName=true which adds a little bit of extra overhead.
That wont fix the error seen when binding a random number of parameters to the statement though. You need to bind the correct number and types of parameters.
Greg

Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

Hi Cereskit
Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
Vicki

Forgotten Blackberry ID.. A little more difficult than a email reset..

Similar Messages

Maybe you are looking for