Forgotten passcode and I don't have the "Trusted device" iTunes is on for iPhone 4?
Right, basically I want to return my iPhone 4 to the original factory settings. It has a passcode on which I cannot remember and I no longer have the device I synced it with. I have gone through the steps advised on holding down the home & wake/sleep button but everytime I go onto iTunes the iTunes pops up with "You haven't chosen to have "Your Device" trust this computer. If you want to manage or sync with this computer, choose Trust on your iPhone now" but because of the passcode I can't. I'm just going round and round in circles and any help from you guys would be superb. Thanks
Remove the iPhone from your Apple ID.
http://support.apple.com/kb/HT4627?viewlocale=en_US&locale=en_US
Similar Messages
-
After entering wrong passcode and I don't have the computer where I sync first time my iphone
How can I activate again in other computer?
Thank you
Have a great dayitzcoatlcarrillo wrote:
After entering wrong passcode and I don't have the computer where I sync first time my iphone
See here > http://support.apple.com/kb/HT1212
In particular... here... If you have never synced your device with iTunes -
forgotten passcode and I no longer have the computer I intially synced my ipad to itune with, how can I restore my ipad
You will still need to connect it to a computer's iTunes to reset it, and you may need to put the iPad into recovery mode in order to be able to do so : http://support.apple.com/kb/ht1808
If it's not a computer that it's been synced to then do you have a backup on iCloud that you could then restore from ? Depending upon what country that you are in, and whether the items are still in the store, you may be able to re-download some/all of your purchases via the Purchased tabs in the iTunes and App Store apps, and the Purchased tab in the ibookstore in the iBooks app. -
iphone 4s is disabled. It says connect to itunes. Itunes ays could not connect because phone is locked with a passcode and to enter passcode on iphone before it can be used with itunes, but I can't enter the passcode because 1) don't know it 2) it's disabled. The device also does not show up in itunes, so how can I restore the phone or unlock it?
Same answer as last time you asked the exact same question:
HT1430 Iphone 4s says disabled connect to itunes and itunes won't connect because phone locked with a passcode. I don't have the passcode to unlock the phone -
My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS require a a passcode and I don't have one. Any suggestions?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup.
In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Last,
- Restore to factory settings/new iOS device. -
I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Can anyone help?
If you know the password to your apple id login - you can then do a restoration once you have put your device into recovery mode using itunes.
read this article to give you direction how to put your device into recovery mode.
Once you have put in your apple id login and password this then will allow you to restore the device once the device is placed in recovery mode.
good luck!
http://support.apple.com/kb/ht1808 -
itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync
Actually I'm the nanny of a 6 year old girl. And is her iPad, my boss needs that this iPad work again because the little girl is making everybody crazy. Please helpppppppp
-
So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!! -
I started to update my ipad but I have an old MacBook and it's really old and I don't have the correct software to update anything. But my ipad is stuck on the connect to itunes screen and wont budge. What do I do?!
Your options depend on which MacBook you have and the version of OS X installed.
To find out: > About This Mac -
I deleted all my music on my iPod, and I don't have the songs on my computer. How do I get the songs back?
http://www.apple.com/icloud/
-
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it. I don't remember it even w/ the hint
Call Apple with the Serial and they will send you the ones that came with the Mac. Or search the Net.
-
I have an iPhone 4 and after the iso 6.0 upgrade I don't have the 3D option in the map app and I don't have the panarama option on my camera. Some features are there but some are.
Those features aren't supported on the iPhone 4. Take a look here http://techcrunch.com/2012/09/19/ios-6-is-now-available-heres-what-features-your -idevice-gets/
-
I am using xp and I don't have the wpa2 personnel option to set it up.
I have a wrt54g3g. I have it set up using security wpa2 personnel with aes. I have the password set and eveything. I can't get my lap top set up to connect. I am using xp and I don't have the wpa2 personnel option to set it up. I need some help on this? Thanks
Message Edited by ewoolwine on 04-06-200702:46 PMMake sure you have Windows XP service pack 2 (SP2) installed.
Also, WPA2 is the same as WPA with AES.
Hope this helps.
Message Edited by toomanydonuts on 04-07-200702:50 AM
Maybe you are looking for
-
Transaction Update Error using ABAP Proxy
Hi Experts, I am facing an issue using ABAP Proxy. File is coming from PI to SAP system and it will update the Transaction IE02 using this inbound ABAP Proxy. If records fails then a mail is going to concerned team. Issue: When File has been sent fro
-
Burning songs to a DVD............
Does somebody know how can I burn all songs to a DVD from a specific playlist? I 've done it without success, because it doesn't let me burn all of them, it jumps from 8 to 8, and I already check all the songs. Weird ahh? HELP PLEASE. hp pavilon Wi
-
T/Code to find what portal is connected?
Dear Experts, is there any t/code where I can get all the information related to the portal that is connected to the BI Server? I was under the impression RZ10 would help but it had all sorts of info that I could not understand.
-
Dear Guys, I have a requirement like this below var1 = 'AAA BBB' var2 = 'cn=groupid,c = d,e = f'. Replace groupid with var1 into var2. CONDENSE var2 NO-GAPS. Here when i use condense no-gaps the gaps with AAA and BBB will get condensed.. For some cas
-
When will Apple admit problem with ARD 3.1?
Ever since I made the unfortunate mistake of upgrading one office to 10.4.10 and ARD 3.1, I can no longer control those computers. There was one user out on maternity leave that I didn't upgrade to 3.1. She's on 3.0 and I can connect to her mac fine.