Foriegn Currency setup using the RIC code
Hi Gurus,
How to configure the foreign currency set up using the Reportable item code(RIC).We need to configure the D rate.and update the daily exchange rate through Reuters using the excel sheet.What is configuration required in sap
Regards
Bhaskar
Check this thread
[Re: Ex.rate diff.accts are incomplete for account 0000171202 currency AUD|Ex.rate diff.accts are incomplete for account 0000171202 currency AUD;
thanks
G. Lakshmipathi
Similar Messages
-
Error in Account Clear using the T Code F-03
Dear Friends,
The users are trying to clear the open items in one of the GL Accounts with multiple currencies, using the T Code F-03. However, while clearing the matching items, the system gives the error - "Exchange Rate Diff Accts are incomplete for account --- currency USD"
Could you plesae advise and help where the error could be and how to resolve the same.
RegardsCheck this thread
[Re: Ex.rate diff.accts are incomplete for account 0000171202 currency AUD|Ex.rate diff.accts are incomplete for account 0000171202 currency AUD;
thanks
G. Lakshmipathi -
How to use the t-code vf31 tor taking print out of invoice
Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venuHi,
Please find the steps
Output type RD00
Transmission medium 1
Sort order 01
Processing mode 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla -
My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info IPad when doing this?
You can go to Settings/iCloud and delete the account, then create a new iCloud account. You can still use the same account for the app store though.
-
Can I use the redemption code for more than one machine for Photoshop Elements?
I want to use the Photoshop Elements that I bought on more than one machine. Is that
possible using the Redemption Code? It says it was used with another Adobe ID.
ThanksHi Stover,
Typically you use the redemption code to retrieve your serial number for Elements products. The licensing for Elements allows the owner to install on two of their computers.
See these for reference:
Redemption Code Help
How many computers can I install Photoshop Elements on?
Hope that helps,
- Dave -
How can i use the project code instead of project xml?
hello
i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
thank you very much?There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
When using the project-class you simply replace the project-xml entry like this:
<project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
Doug Clarke
Product Manager
Oracle9iAS TopLink -
In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Use the same code module for several steps in the sequence
Hello All,
I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands. I have gotten as far as calling the VI in a new thread so that it can be run asynchronously. I can run the simple sequence and it will indeed open the VI, and move on to the next step. When I close the VI manually from the front panel, the sequence in TestStand completes, as expected. So it appears that I have that much working.
My question is how to call the separate thread from the main sequence or other sub sequences when I need to edit the parameters. If I insert an Action step, I am required to select a VI file, but from what I can tell, it opens a different instance of the file, and does not provide an interface with the other instance running asycronously. My next guess was to use a Statement step, but I was not able to figure out how to configure the lookup string to call the VI parameters. Beyond that, I'm not sure how to proceed. Please advise.
My intention is to start the code module VI (asynchronously), run several different subsequences within the main sequence that call that same VI and edit it's parameters, close everything and report on the results. If I am misunderstanding how TestStand is supposed to work, please let me know.
Thanks,
GSinMN
Solved!
Go to Solution.What I do is use a Queue to send data to the asynchronous VI. So it can run and do whatever, but also recieve the commands from the queue. I use an Action Engine that holds the queue reference and sends the commands. So you really just have to call the Action Engine from your sequences.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
When i tried to text a message from my contact list i received a message saying invalid number of digits. i used the area code with the number but still would not send
Call your carrier and see what they suggest.
-
I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.
you need a lr serial for mac. the serial number for pc and mac are different.
you can download a trial lr 4 for your mac but you need a mac serial number to install.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
I scratched out my itunes gift card way to much and now i can't read the redemption code, is there anything i can do to still use the gift card. maybe using the download code instead?
please respond back
-emilyWith any luck, the following document may be of some assistance with that:
iTunes Store: Invalid, inactive, or illegible codes -
Pick up a virus on laptop, Sent it in to be removed, now unable to access Photoshop. Can I download it again using the ID code.
Try this link and validate with your 24 digit serial number - click here for PSE downloads
-
How to create an Invoice for the sales order using the T-Code VF01
Hello Experts,
How to create an Invoice for a sales order using the T-Code VF01?
Thanks in advace,
Sumahi,
Make the following settings-
1. Create sales document and billing type
2. assign billing type in sales document type config VOV8
3. Activate itemcategory as sales order related billing
4. Maintain copy control header and item level between sales order and billing
5. Maintain pricing procedure for sales order and billing
6. Define Output procedure in case to print invoice
Regards
Goutham -
My I-pad was locked for using the wrong code. What do I have to do to unlock?
My I-pad 4 was locked from using the wrong code. What do I need to do to unlock it?
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
I have a new iPad. I cannot get an approval notification to appear on the iPad to set it up after turning it on on Yosemite. Ive tried the approval code but that generates an error saying it can't connect to the cloud.
Ok, I have to say I was really impressed by the effort. Nokia Support (in The Philippines) called me 4 times over the last 2 days to help with my phone.
Here is there responses have put them in order of my questions.
1. I am to reinstall the operating system on the phone. They said that this is the most likely (but not confirmed) fix to the SIM card problem (although they would not confirm it was a problem with the phone).
2. No answer because we did not get that far.
3. To setup a gmail IMAP account you MUST us Nokia messaging. Period. Since I have security concerns, that is out of the question.
4. This is the big one that stopped it. The Nokia N8 is a Class B cell phone meaning that you cannot use data and voice at the same time. They told me that all Nokia phones were Class B, but I told them my E71 is not. After research, I found that the E71 and E72 is Class A (Can do voice and data at the same time) and that the N8 is Class B. Here is an article explaining the difference. This was a deal breaker. I cannot access the internet while I am on a call. Reminds me of a dial up modem.
5. Reinstall the software and it might fix it.
6. No answer.
7. Use Nokia Messaging.
8. Reinstall the software and it might fix it.
So, I am sending the phone back because I cannot use it. I cannot imagine a smart phone on the market that cannot do internet and voice at the same time.
Too bad.The N8 is a terrific camera and you should buy it for that, but look elsewhere for a smartphone.
Thanks to all that read and helped.
Don
Maybe you are looking for
-
Wacom tablet pressure sensitivity, dont work outside canvas
Hi. I wonder, if i'm the only one, who are having problems to start a stroke outside the canvas and follow it on the canvas, without the pressure sensitivity is all on max. seems the same is happing, if you have marked an area and start at stroke out
-
Hi All, I need to understand the concept of accrual reconciliation, Please let me know a source or plese explain in the forum. Further let me know if all the PO related trasactions appear in the accrual reconciliation report or only the items where t
-
Fix Date & Qty Field in Schedule Lines Sales Order
Dear Friends, I want to understand the need and use of the Fix Date & Qty field check in the sales order -> Item -> Schedule Lines. Can anybody explain me the need of the same. Regards, Harsh
-
Acquisition vidéo (flux direct) sur JVC GR-D73 = Final Cut Pro ou iMovie
Je n'arrive pas à acquérir une vidéo sur mon camescope JVC GR-D73 (flux direct avec magnétoscope analogique) ? J'ai le même problème avec iMovie 10.0.0.1 j'ai la version 10.9 (Mavericks) final cut pro v10.0.0.9 Merci pour vos lumières ... cela fonc
-
Cfajaxproxy help..
I have trouble getting ajax to work on my application. I am using cfajaxproxy tag and I keep getting an error of "exception thrown but not caught". I am trying to get results back from the server of the query's recordcount. if its 0 then relocate the