Foriegn Trade - BusTransactType missing

Hi All,
While doing billing, iam not getting BusTransactType automatically, this BusTransactType will be there in Foriegn trade/customs data tab and below Orgin/Destination/business tab in billing item level.
I checked in copying controls, the settings is good, i checked in this path SPRO>S & D->Foreign trade/customs>Basic data for foriegn trade> Define Business Transcet type and defualt value, there iam missing my combination.
Sales org Dist chn Item cat Tr ty
If i add here, will i get automatically?? can you thro some light on these automatc detaermination of foregin trade...
Thanks
Ramki

I have done config & found that,
if you maintain Mode of Transport Border & Domestic Mode of Transport- @ header level.
Item level, will be automatically determined,
(but you should maintain ,
Commodity Code / Cntry-Region of Origin/Desptach Cntry/ Export Procedure / Business Transaction type.)
Cntry-Region of Origin/Desptach Cntry/ - MMR - Foreign Trade Export Data view.
your issue will be solved.

Similar Messages

Foriegn Trade and CIN configuration for SD

Hi all,
Can anybody please send me step by step procedures regarding
1. Foriegn trade configuration in SD Module wrt India.
2. CIN configuration in SD Module.
Regards,
Khan

You require to do thenecessay configuration for Foreign Trade Data:
IMG --> Sales and Distribution --> Foreign Trade/Customs --> Basic Data for Foreign Trade --> (Do the necessary configuration here)
In most probability, it will not default, but it is required to be maintained in Invoice (based on configuration)
Regards,
Rajesh Banka
Reward points if helpful.

Foriegn Trade in Import Purchase Process

Hi Gurus,
Can you please guide me how can i use the Foriegn trade & customs functionality in MM import purchase process.
cheers

[Maintain foreign trade import data view in material master |Re: Maintain foreign trade import data view in material master]
[Foreign trade item data is incomplete|Re: Foreign trade item data is incomplete]

Foriegn trade Country code in Billing document

Hi,
Can any one guide me how the country code is populated in Billing document Header under Foriegn trade/custom tab.
As we are facing issue with this, in one billing document with germany ship to party the country code is being populated and the other billing document with U.S ship to party country code is not populated.
Thanks in advance.

Thanks in advance,
As u said my problem is not with the Transportation and Incompleteness, In the Billing document header level beside the Ship to party address the Country code is not being populated for other than germany customer.
SAP Help says
The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
The two-character ISO code in accordance with ISO 3166, which is delivered by SAP as a default, is usually used.
It could also be the vehicle license plate country-code or a typical country key, for example, in Germany the Federal statistics office key.
The country keys are determined at system installation in the global settings.
Since the country key does not have to correspond to the ISO code in all installations, programs that differ according to certain values of the country key cannot query the country key T005-LAND1, but have to program based on the ISO code T005 INTCA.
Please suggest
Thanks.

Updating foriegn trade/ custom data

Hi Experts,
I need to update the foriegn trade/custom data (EIPO-HERKL, to be specific), for the inbound delivery.
Is there any BAPI or FM, using which I can update the field.
Thanks
Rohit

Hi Niel,
I know it gets populated from the material master, but the requirement is like, Country of Origin is sent by an external vendor through an excel sheet. And we need to update it. We have already tried various options. But the only option now left is if we can update the field through any FM.
Thanks Rohit

Foriegn trade EOU unit with excise bonds

i have a EOU(export oriented unit) which has to be brought into SAP though roll-out. Now do i have to use the foriegn trade for this or i can do it directly.
IF any one have any documents please forward to
Also let me know about the excise under bonds and other statuatory requirements involved.
[email protected]
regards,
Raghu.

Hi,
Plant 2000 Can send a material for Subcontracting against Subcontracting Challan ie 57F4, but Cant sell in domestic market.
Ans: - This can be mapped through following Subcontracting process in Plant 2000;
Creation and maintenance of 57F4 Challans for Subcontracting Process (Subcontracting without Payment of Duty)
1. Transfer Posting of components to Subcontractor (MB1B)
2. Creation of Subcontracting Challan (J1IF01)
3. Refer Subcontracting Challan at the time of GR (MIGO)
4. Reconciliation of Subcontracting Challan (J1IFQ)
5. Completion of Subcontracting Challan (J1IF13)
6. Generation of Annexure IV (J1IFR)
1000 Plant is Subcontractor for 2000 Plant. In this case I cant transfer stock from 2000 plant to 1000 plant through STO.
If 1000 Creates STO, 2000 has to create sales document and outbound delivey which is not applicable as per EOU laws.
Ans: - As per EOU law, you can not sale a material in local market (means you have to only export the materials fron this plant) that doesn't mean that you can not transfer the material from plant to plant.
1. ME21N - You create a Subcontracting PO in Plant 2000, keeping Vendor as Plant 1000 (Create Plant 1000 as Vendor)
2. MIGO - Transfer Posting > Others (Use Movement type 303 to transfer the stock from plant 2000 to plant 1000)
3. J1IF01 - Create Subcontracting Challan w.r.t. Mateerial Doc of 303 mvmt type)
4. MIGO - Goods Receipt > Others (Use Movement type 305 to receive the stock from plant 2000 to plant 1000)
Prerequisite: - In config. include 303 in movement tupe groups of issues (i.e. 0001)

Reg:Material Master Foriegn Trade view Update

Hai All,
I need to update the Material Master (mm02) transaction
In that foriegn trade view i need to update .
Is there any BAPI or Function module or any standard program is there?
Could you please help me out?
I need to update the Custon Tariff Prefe. In Foriegn trade view.
Please help me out.
Thanks & Regards,
S.Chaitanya.

Hi Chaitanya,
There is no separate function module tro only change the foreign trade information but the generic function module is
BAPI_MATERIAL_SAVEDATA
Regards,
Ravi

Foriegn trade view in MM01

Hi,
I have used BAPI_material_savedata to load material data, in that babi I couldn't able find the Foriegn trade import view can any one give the suggestion for this.
regards,
paul

Hi,
Foreign Trade view comes under Purchasing or Sales view,
depending upon whether it is Export or Import.
You will need to fill PLANTDATA, PLANTDATAX parameters of the BAPI.
Also, some fields for FT view are at client level.
hence, fill the CLIENTDATA and CLIENTDATAX parameters of BAPI_MATERIAL_SAVEDATA.
It will create Foreign Trade view.
Hope this helps..
regards,
Shashank

Foriegn trade

Hi All,
I want to know the information regarding below mentioned points in Foriegn Trade.I have gone through so many thredds but i am not getting the exact informaion.
1. Specific Data for Customs Processing=Customs quota, antidumping laws.
2. Official Documents/Certificates/Verifications/Cust.Approvals= Pre approved customs number is available which big expo/import houses use for faster processing of the trade documents.
thanks in advance...
with cheers
Sandeep D

Hi
I give below the details which I know on Foreign trade
Exports - Form ARE1 is prepared for the export documentation and sent alongwith the material till port. Endorsements are done by the customs authorities on the ARE1 with the Bill of lading and the vessel details alongwith the shipping bill details and sent back two copies of the ARE1 back to the initiator. Bid exporters are provided with additional facility like they can apply for licence with the customs for the export proceeds made by them during the year and get DEPB licence (Duty Entitlement Pass Book) which can be used for payment of Customs duty on the Import of materials. This will fasten the process for these giants in clearing their goods at customs.
Imported goods can be kept in customs for an initial period of 7 days beyond which charges will be levied on the basis of the storage area occupied by the imported material by customs.
Regards,
Lakshmanan Krishnan

Billing: Foreign trade data missing error

Hello friends,
I have a peculiar problem while trying to release billing doc to accounting. Delivering country is BE and Desination country is DE. I have setup config under Foreign data transportation to pull up default values by maintaining Tcode VI95.
However when I do VF01 the system doesn't seem to pull that data. Futhermore if I were to save the billing doc with foreign trade data as incomplete and then do VF02 to enter the data making sure the doc is complete, the system still won't let me post the data saying that foreign trade is still missing when infact it has been entered manually and the doc says its complete.
Any ideas??

Hi Robert,
did you know the OSS-Note 354222? Perhaps it usefull for you to have a look on it. If you one time go into the foreign trade data in the invoice, and they are incomplete you can't transfer this invoice to accounting.
Regards Thomas

Foreign trade data missing

Hi Friends
I am having a typical issue in accounting doc header the foreign trade (FTD)is missing.
In typicl upgrade scenario 4.6c FDT is available in Vf02 Header Level.I have checked material master data which is not the source of Foreign Trade data.
I have compared nodes of FDT in both 4.6C & 6.0ECC. they are same.No transport is mising.
Even VI29 & VI39 are also correct.
Do you have any idea of any change with FDT in Upgrade Scenario ?
Please help
Saurabh

Hello,
please check the tables EIKP and EIPO.
You can find the EXNUM in table VBRK. For the EXNUM you should have an entry in EIKP and EIPO.
If these entries are missing the billing document is incomplete.
To correct the document, please try to go in VF02 and enter this invoice and then go to Header
Foreign trade data and simply come out of the screen by pressing green
arrow (no changes to be made) and then save the Invoice.
Then it should be possible to trasfer the document to FI.
Hope this information help.
regards
Claudia

Trade Up - missing carrier

Hello,
I was looking at the Trade Up program that is currently ongoing in the US and Canada. Through the list of carriers, Fido is not present.
Since Fido only offers 2 blackberries (no updates in 2 years) I would have beneficiated of this greatly.
I know Rogers bought Fido a few years ago, but they still deal in business differently. Has this been misinterpreted and that is why Fido is missing, or is it because Fido does not offer those handsets that it is missing?
Please help me evolve in the Blackberry world!
Thank you!

You may be able to get a 10% discount from Apple on a new iPod, but you'll do much better selling your current iPod on eBay or similar.
There is no 'decent' trade-in policy with Apple directly.

Foriegn trade view in BAPI_MATERIAL_SAVEDATA

HI,
I am using BAPI_MATERIAL_SAVEDATA in that I cant able to find the Foreign trade view can any one suggest me where it is.
regards
paul

Hi,
Foreign Trade view comes under Sales/Purchase view depending upon whether it is import or export.
Hence, there is no specefic selection for it.
This view contains some client level data and some plant level data.
If you fill CLIENTDATA, CLIENTDATAX, PLANTDATA and PLANDATAX parameters, the FT view will be created.
Hope this helps..
Regards,
Shashank

Use of Foriegn trade in Business Scenario

Hi,
I would want to understand the use of foreign trade data in any business scenario.
So basically I would like to know in which business scenrios do we use foreign trade data?

Hi
If you have engaged in the exports sales process then you have to fill up the foreign trade customs data in billing header as well as item.
You may need to r=enter the details like
country of origin
mode of transport border
mode of transport domestic
customs of office
region of origin
commodity code
and some more fields
regards

Save foriegn trade data of purchase order programatically

Hi All,
Using BAPI_PO_CHANGE, it is not possible to update the foreign trade data. Is there any standard way to update these fields, other than using direct table update?
Thanks,
Swarna Munukoti

Hi Swarji,
Right, The foreign trade cannot be updated using this BAPI.. Since foreign trade data cannot be changed with this BAPI for technical reasons, this parameter has been created for future developments only. (Please do not use!!!).
Try to use BDC to save foeign trade data...
or try the FM ALE_PO_CHANGE which is having import parameter POEXPIMPHEADER and table parameter POEXPIMPITEM.
Thanks and Regards,
Senthil kumar Anantham.

Foriegn Trade - BusTransactType missing

Similar Messages

Maybe you are looking for