Form 10g not returning any data
Hi,
I have created a simple data-block based on a view in a seeded Oracle R12 form. When i run the form, I can see all fields on canvas but as blank. Pre-query trigger fires, on-select fires, on-fetch too fires. But Post-query trigger doesn't fire.
View has 2 rows, so as per my understanding Post-query should fire 2 times. But it doesn't.
When i run the same query on view in Pre-query trigger and get the count. It returns me 2.
Am i missing any setup or property on data block.
Thanks!!
Harleen
Harleen,
As you are working on a EBS R12 form, I suggest you post your question in the General EBS Discussion forum. EBS Forms must comply with Oracle Development Standards and there are specific objects that must be included in your form. If you haven't already, you might want to take a look at the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
<ul>
<li>Oracle Applications Developer's Guide
<li>Oracle Applications User Interface Standards for Forms-Based Products
<li>Oracle Application Framework Personalization Guide
</ul>
Craig...
Similar Messages
-
Custom reports in R12 not returning any data
I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan -
Binocular search for Cost Center is not returning any data
Hi Gurus,
When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon, it is not returning any data. However, when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
Any idea of how you troubleshoot it.
Thanks in advace for your help.
HANot sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
Note 1259735 - Search help of generic account does not work
If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
JF -
Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
saw.odbc.statement.fetch
saw.subsystem.portal.pdf
saw.delivers.rpc.getDeviceContent
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUNDThanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish -
How to know if the data model qry is not returning any data
Hi
If my report doesn't have data (meaning if the data model qry doesn't retreive any data), I wan't to show this text: "There is no data returned."
My question is how would I know that the qry is not returning any data. I know I can create a text field, and write a trigger on it, to set it True or False depending on the fact that data is being returned or not.
Thanks
ShaluHi,
In Data Model create a summary column for function=count on one of your columns.
Then for BeforeReport trigger you can write
function BeforeReport return boolean is
begin
if :CS_RPT_NODATA > 0 then
return (TRUE);
end if;
SRW.MESSAGE(300,'There is no data');
return (FALSE);
end;
Regards, Gicu -
Payroll extractor 0HR_PY_1 do not return any data in RSA3 in full mode
Hi,
I have activated Payroll extractor 0HR_PY_1.
I use RSA3 to check the extractor.
It does not return any data(0 records) in full mode.
Do i need to do activate any other object, apart from the datasource?
Thanks in advance for your help.
Regards,
Suresh.Hi Suresh,
HR extractors need additional authorizations. When the extractor is run, there would be a check if the user is authorized to extract data. Check SAP notes 672514 & 397208. Also find my previous post on this.
Re: Extractor 0HR_PY_1 does not return data to BW
Best Regards,
Murali. -
Boot loader did not return any data.
Hi,
i have installed the Oracle VM Server and Oracle VM Manager in two different machines. I'm using the VM Manager to create the Virtual Machines(guest). I followed all the steps given in the Oracle VM Manager User guide 2.2. I'm using the RHEL5 as the OS for the guest machine. I receive an error saying 'Boot loader did not return any data.'. The vm.cfg file has got created in the path /OVS/running_pool/12_VM1. The contents of the vm.cfg file are as below
bootloader = '/usr/bin/pygrub'
disk = ['file:/var/ovs/mount/616CC4FA976D4352B1630FFCE835FEC5/running_pool/14_VM1/System.img,xvda,w']
keymap = 'en-us'
memory = '1024'
name = '14_VM1'
on_crash = 'restart'
on_reboot = 'restart'
uuid = '3a925bc9-1555-b5bb-b0f0-c5958db65468'
vcpus = 1
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=vm123']
vif = ['mac=00:16:3E:02:8B:64, bridge=xenbr0']
Can any one help out in this ASAP.
Thanks in Advance.re..
sorry but did you installed guest OS or not ?
Did you install from image, from dvd ...?
If yes try start youre vm from server terminal
#>xm create -c vm. cfg
*T -
Form/php not returning certain data
So I just recently designed/launched a website (Dreamweaver CS 5.5) that utilizes a form for feedback from visitors. The form/corresponding php script seems to be functioning, as I have tested it numerous times. The only problem is that ONE of the entry forms doesn't seem to be returning any data.
The HTML for the form is as follows:
<form id="form1" name="form1" method="post" action="send.php">
<table width="510" border="0">
<tr>
<td colspan="2"><p>Questions? Comments? Criticism?</p>
<p>Let the Artist know by filling out this handy form:</p></td>
</tr>
<tr>
<td width="72">Name:*</td>
<td width="428" class="returntext"><span id="sprytextfield1">
<label for="name"></label>
<input type="text" name="name" id="name" />
<span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldMinCharsMsg">Minimum number of characters not met.</span><span class="textfieldMaxCharsMsg">Exceeded maximum number of characters.</span></span></td>
</tr>
<tr>
<td>E-Mail:*</td>
<td class="returntext"><span id="sprytextfield2">
<label for="email"></label>
<input type="text" name="email" id="email" />
<span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinCharsMsg">Minimum number of characters not met.</span><span class="textfieldMaxCharsMsg">Exceeded maximum number of characters.</span></span></td>
</tr>
<tr>
<td>Subject:</td>
<td class="returntext"><label for="textfield"></label>
<span id="sprytextfield3">
<label for="subject"></label>
<input type="text" name="subject" id="subject" />
<span class="textfieldMinCharsMsg">Minimum number of characters not met.</span><span class="textfieldMaxCharsMsg">Exceeded maximum number of characters.</span></span></td>
</tr>
<tr>
<td>Comment:*</td>
<td><span id="sprytextarea1">
<label for="comment"></label>
<textarea name="comment" id="comment" cols="45" rows="5"></textarea>
<span class="textareaRequiredMsg">A value is required.</span></span></td>
</tr>
<tr>
<td> </td>
<td><input type="submit" name="button" id="button" value="Submit" />
<input type="reset" name="button2" id="button2" value="Reset" /></td>
</tr>
<tr>
<td> </td>
<td>Fields marked "*" are required.</td>
</tr>
</table>
</form>
And the PHP script is:
<?php
$to = "[email address removed by moderator]";
$subject = $_REQUEST['subject'];
$name = $_REQUEST ['name'];
$name = $_REQUEST['name'] ;
$email = $_REQUEST['email'] ;
$comment = $_REQUEST['comment'] ;
$totalmessage = "
Name: $name \n
Email: $email \n
Subject: $subject \n
Comment: $comment \n ";
if (mail($to, $subject, $totalmessage)) {
echo("<p>Message successfully sent!</p>");
} else {
echo("<p>Message delivery failed...</p>");
?>
When I test the page through my browser (firefox 24.0), I receive the e-mail as it should be, except that the "comment" section is always empty, no matter what I enter. I have checked and double checked and triple checked, and the associated text field is names "comment", and its entry in the script is ['comment']. I have tried replacing the sprytextarea with a regular, non-spry text area, and that didn't make a difference either. The only difference between this field and the other fields (all of which are returning exactly what they should) is that it's a textarea rather than a text field...but if that is the case, I have no idea how to fix it.
Any help on the matter would be much appreciated.According to the official specification for plain text email messages (http://tools.ietf.org/html/rfc2822#section-2.3), a newline character must not appear independently in the body. It should always be preceded by a carriage return.
Your code looks like this:
$totalmessage = "
Name: $name \n
Email: $email \n
Subject: $subject \n
Comment: $comment \n ";
Change it to this:
$totalmessage = "
Name: $name \r\n
Email: $email \r\n
Subject: $subject \r\n
Comment: $comment";
The specification also says that lines in the body must be no longer than 998 characters. Because you have no idea how long the content in the text area will be, it's a good idea to pass the body of the email to the wordwrap function like this before sending the mail:
$totalmessage = wordwrap($totalmessage, "\r\n");
I also agree with bregent that you should be using $_POST instead of $_REQUEST. -
Very Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any dataHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW -
HR Form do not select any data from specific Period
Hi All
I am facing issues on the HR FORMS for Brazil related to the Remunaration Statement
When I try to select any employee from a specific period (before April 2012), the system does not select any data.
From April 2012 until the current period and I could select the data and print the Form
I do not believe that is related to the Master data from the Employee, since it is always related to the same period, I guess it is on the HR Form configuration, retricting the period anywhere, but I could not find it
do you know any idea on how to fix it ?
RegardsHi Steve,
In SQL Server Analysis Services, we can hide or disable hierarchy level by using
AttributeHierarchyEnabled property, however, when this property is set to false, this level will not appear no matter if contain data or not. In your scenario, you want to hide the hierarchy level dynamically, right? As Aleksandr
said, I am afraid there is no such a method to achieve it.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Ref cursor not returning any data
Hi
How can I raise an exception when ref cursor is not retrieving any data.
create or replace function getempdetails(p_deptno in number)
return sys_refcursor
is
v_refcursor sys_refcursor;
begin
open v_refcursor for
select * from emp
where deptno = p_deptno;
return v_refcursor;
exception
when no_data_found then
dbms_output.put_lline('No data available for p_deptno');
end;
Say for example p_deptno = 12
Thanks
Raghu
Message was edited by:
user584123It is useless but... you can do this
create or replace function getempdetails(
p_deptno in number
return sys_refcursor
is
v_refcursor sys_refcursor;
flag number;
begin
select count(*)
into flag
from emp
where deptno = p_deptno
and rownum = 1;
if ( flag = 0) then
dbms_output.put_lline('No data available for p_deptno');
return null;
else
open v_refcursor for
select * from emp
where deptno = p_deptno;
return v_refcursor;
end if;
end;Bye Alessandro
Message was edited by:
Alessandro Rossi
Or this
create or replace function getempdetails(
p_deptno in number
return sys_refcursor
is
v_refcursor sys_refcursor;
flag number;
begin
select 1
into flag
from emp
where deptno = p_deptno
and rownum = 1; -- This throws the exception
open v_refcursor for
select * from emp
where deptno = p_deptno;
return v_refcursor;
end; -
Hello,
For some reason, the result set returned from the following query will not return one of the columns, and I am stumped. Any help would be appreciated. The column that is returning NULL, even though all the other columns return data is CHQ.CHECK_NO (Note: CHQ.CHECK_DATE is returning data just fine). CHQ.CHECK_NO is defined as Number 15,0
SELECT INV.INVOICE_DATE, INV.VENDORNO, INV.INVOICE_NO, INV.INVOICE_AMOUNT, INV.DUE_DATE, CHQ.CHECK_NO, CHQ.CHECK_DATE, SPAY.COUNT1
FROM APINVOICE INV, CHEQUE_DETAIL CHQDTL, CHEQUE CHQ,
(SELECT VENDORNO, INVOICE_NO, COUNT(*) AS COUNT1
FROM VISPAYMAS
WHERE COMP_CODE_ACCT = 'M'
GROUP BY VENDORNO, INVOICE_NO) SPAY
WHERE INV.ID = CHQDTL.APINVOICE_ID (+) AND CHQDTL.CHEQUE_ID = CHQ.ID (+) AND INV.VENDORNO = SPAY.VENDORNO (+) AND
INV.INVOICE_NO = SPAY.INVOICE_NO (+) AND (INV.VENDORNO = 'AV603') AND (INV.INVOICE_DATE <= '25-JUL-06') AND
(INV.INVOICE_DATE >= '25-JUL-05')
ORDER BY INV.INVOICE_DATE DESCAfter further checking, it appears that indeed all the CHECK_NO data is actually NULL for the result set I am querying. The fact that the CHECK_DATE was returning data lead me to believe that there would have to be a corresponding CHECK_NO.... guess NOT! :) Ugh, I just happened to get stuck with a really odd test result set. Thanks for the help! On trying a different VENDOR_NO in the query, it is returning CHECK_NO data. I'll have to inquire as to why there would be CHECK_DATE data and not a CHECK_NO... hmm.
I did add the TO_DATE() function into my query, thanks for the tip. -
Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BWHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW -
When using the FM GN_DELIVERY_CREATE i am not getting any delivery created for a PO.
Hi,
After calling any function module, and if it has to do any changes in the SAP database table, u must do Commit work..
After call function, you should give either COMMIT WORK or CALL FUCNTION ' BAPI_TRANSACTION_COMMIT'......i.e
CALL FUNCTION 'GN_DELIVERY_CREATE'
importing
exporting.
either
COMMIT WORK.
or
CALL FUCNTION ' BAPI_TRANSACTION_COMMIT'.
Regards,
Surya -
Child VO do not return any data
Hello Champs
I am new to OAF. I am creating an OA form of parant child relationship with advanced tabled -in - advanced table.
I have build this similar to http://oracleanil.blogspot.com/2010/06/advanced-table-in-advanced-table-via.html
I have Hide/Show button on parent table when i click show it shows me detail information based on foreign key relationship. In Detali section i am able to insert new row and update existing row as well. But in detail section when i use multi selection option to delete multiple records i am facing this challenge.
To delete rows:
1) I have added transient attirbute SelectFlag
2) I have create new Delete button and write this piece of code in CO and AM resp.
Issue: VO gives me no data and thus i am not able to iterate through it.
CO Code
else if (pageContext.getParameter("DeleteInnerRecord") != null)
//Number hdrTrxId = new Number(1);
//Serializable parameters[] = {hdrTrxId};
oaM.invokeMethod("deleteApplicationRecord");
AM Code
public void deleteApplicationRecord ()
System.out.println("In application delete - ");
AppsLog myAppsLog = new AppsLog();
if(myAppsLog.isEnabled(3))
myAppsLog.write("fnd.common.WebAppsContext", "Wires - Delete receipt applications.", 3);
//getTransaction().commit();
WireTrnsfLineVOImpl delLineVO = getWireTrnsfLineVO1();
Row[] delRow = delLineVO.getAllRowsInRange();
int m = delLineVO.getFetchedRowCount();
delLineVO.getLin
System.out.println("Row Count - "+m);
//OAViewObject delLineVO = (OAViewObject)findViewObject("WireTrnsfLineVO1");
//Row[] delRow = delLineVO.getFilteredRows("SelectFlag","Y");
if (delRow != null && delRow.length > 0)
int numRows = delRow.length;
for (int i = 0; i < numRows; i++)
WireTrnsfLineVORowImpl rowi = (WireTrnsfLineVORowImpl)delRow;
System.out.println("Delete Loop Rec - "+rowi.getLineTrxId());
if(rowi.getSelectFlag()!= null && rowi.getSelectFlag().equals("Y") )
rowi.remove();
getDBTransaction().commit();
Thanks
AmitI answer my own question :)
To retrieve data from inner advance table, we have to use OAInnerDataObjectEnumerator.
Operation which could be perform on Advance table would not be application to inner advance table.
Thanks
Amit
Maybe you are looking for
-
Some keys don´t work in SQL Developer 1.2
SQL Developer 1.2. In SQL Worksheet the following keys don't work: space, backspace, start, end and enter.
-
H.264 TS playback fail in Quicktime
Recently Hong Kong started the digital TV broadcasting. Which using H.264 Transport Stream as standard, however, when I use the set top box to record the program. It cannot be play back in Quicktime. As I know Quicktime support H.264, is there any re
-
Field Naming convention..
Hi, I recently purchased Acrobat Designer 7.0 and found that the fields are named in the following convnetion - F[0].P1[0].A1[0] while I named the field as A1 only. I am using a third party driver to read the PDF file to set values and it is not able
-
Does imovie work with Mac OS X 10.6.8 (10K549)
Does iMovie work with Mac OS X 10.6.8
-
1 Auth. Object - 2 TCodes - Need 2 different actions?
Hello All, I have 2 transactions ( IDX1 & IDX2) which works with authorization code "S_IDOCMETA". I need to have different access levels set for these two transactions. For example, I need only display access for IDX1 tcode and I need full access fo