Form builder is not opening in oracle linux

Hi,
I have installed Oracle EBS in enterprise linux 5.8 . when i am trying to
open form builder with frmbld.sh following error occurs
FRM-91113: Internal Error: cannot get default resource file name.
FRM-10039: Unable to start up the Form Builder
can any one suggest me for a how to resolve this.
Regards,
Sagar
Edited by: 953446 on Aug 17, 2012 10:56 AM

Hi,
Host file entry i have:
127.0.0.1 localhost raouf.oracle.com
169.254.25.129 raouf.oracle.com
123.201.70.57 raouf.oracle.comWhy do you have two entries for the same host? Please edit this file, and make sure you have one IP Address for "raouf.oracle.com", run AutoConfig on the database/application tier nodes then try again.
For the browser, make sure you use a certified client OS/Browser.
Regards,
Hussein

Similar Messages

Database home page not opening in oracle linux 4 after installation?

I have just installed oracle 10g express edition R8 (32 bit) in oracle linux 4 (oem 4) which is running on vmware. After installation on going
application(start)->oracle 10g express edition ->Go To database home page. Database home page starts on konqureor and it shows
"An error occurred while loading *http://http//127.0.0.1:%httpport%/apex*:
Unknown host http "
All the other application including plsql is working right which comes with oracle 10g xe. But without Database home page i can't start doing plsql because i can not create any database without opening database home page.
I have also posted this question in yahoo answers(_http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9_) but what answers has been provided i am not able to understand.
plz help i wanted to work on oracle database. I am trying it for so long. Thanks in advance
Edited by: 921562 on Mar 24, 2012 3:35 AM
Edited by: 921562 on Mar 24, 2012 3:35 AM

921562 wrote:
I have just installed oracle 10g express edition R8 (32 bit) in oracle linux 4 (oem 4) which is running on vmware. After installation on going
application(start)->oracle 10g express edition ->Go To database home page. Database home page starts on konqureor and it shows
"An error occurred while loading *http://http//127.0.0.1:%httpport%/apex*:
Unknown host http "
All the other application including plsql is working right which comes with oracle 10g xe. But without Database home page i can't start doing plsql because i can not create any database without opening database home page.
I have also posted this question in yahoo answers(_http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9_) but what answers has been provided i am not able to understand.
plz help i wanted to work on oracle database. I am trying it for so long. Thanks in advance
Edited by: 921562 on Mar 24, 2012 3:35 AM
Edited by: 921562 on Mar 24, 2012 3:35 AMThis has nothing to do with Oracle. Do you have an understanding of how URL's are constructed? The leading characters, delimited by the colon (':') specify http protocol. The string between the first colon and the next (if exists) specifies the fully qualified name of the host, or the IP addess of the host. Take a look at what you have there: //http//127.0.0.1" I really don't think your host name is "//http//127.0.0.1". More like '//127.0.0.1"

Compiling fmb module in Form builder does not change the fmx file

Hi,
I am using Oracle Forms Builder version 10.1.2.0.2 To edit 10g2 forms.
In the last month, it happened twice that an fmb file I edited in the forms builder did not change the fmx aftrer compilation.
namely, when I opened the fmx file in the application, I didn't see the changes, but they were present in the fmb form opened in the Form Builder.
Usually when we have the fmx file open in the application, the form builder won't let me compile it - showing the following error:
FRM-30087: Unable to create form file
When this error happens and the changes are not reflected, this error message doesn't appear even though the fmx file is open in the application.
I tried deleting the fmx file, and then opening it in the application to see if there is another copy of it.
The application gave an error 40010 - can't read form.
When I recompiled the file, the fmb didn't show any changes either, even though the file was created again in the file system.
I could not find a way to consistently reproduce this problem.
Did you ever encounter such a problem?
I noticed the edit -> preferences -> general menu has the option to "save befor building".
Does it mean the Form Builder keeps a cached copy of the fmb in memory, and when this error happens it compiles the original file system fmb file rather than the cached memory copy with the changes?
Thanks,
Eyal Azran
Configuration Management Engineer - Isracard

Hey Craig,
Thank you for your response.
I verified the version of the forms on the Application Server and they are the same.
This problem is quite tricky to reproduce, it happens once every few months!
(we have about 10 developers, who are developing and testing on multiple servers - so far two of the servers showed this issue)
I've determined that the reason this happens is that:
1. The compiled fmx is vied in the application.
** for some reason, the frmweb.exe process on the server does not terminate properly **
2. The developer compiles the form again in Form Builder
3. The Form Builder does not detect that the form is open in the mal-terminated process
There usually is an error message here saying the fmx module is locked - this error happens because this message is not displayed.
I will attach an image of the process monitoring tool we use ( ProceXP ) showing the ghost process that locks the fmx module.
<edit>oops, I guess I can't attach the image- I can e-mail it if you'd like</edit>
If anyone has an idea for a solution, this will help immensely.
Eyal
Edited by: Hey_Al on 06:04 06/05/2010

11g forms builder is not able to initiate the Internet explorer

Hi,
my problem is that my forms builder is not able to open the form in IE during compilation if Internet explorer is not already running but it is able to open the form in a new tab if Internet explorer is already running.
My system's specifications :-
Oracle forms builder 11g
Windows 2008 SP2
Internet explorer version :-Internet explorer 9
Please help.
Thanks,
RS

1. In the Builder verify that you have valid values for the Application Server URL and Browser Location fields in the Builder Preferences Runtime (tab). Do not leave either field blank.
2. In the browser settings, on the Advanced tab, scroll down to the Security section and check the box labeled, "Allow active content to run in files on My Computer".
3. Click Ok to save the changes. Close ALL open browsers
4. Retest

PO# is not opening in oracle

Hi All,
PO# is not opening in oracle. It's saying "in process".
This order is about to get receive in the warehouse and need it to show in oracle.
Thanks,
JP.

Hi JP,
If the PO status is in status "in process", it means that there is an approval workflow in progress. As soon as the approval (or re-approval) is completed, you will be able to open the PO.
Hope this helps,
J.

Interface Builder does not open when I click Mainwindow.xib file on Monotouch.

I did a lot research about it, What the most of view say it is because of the iOS SDK, not because of the MonoTouch, they say that iOS SDK provides the Interface Builder? Any suggestions? Thanks in advance. iOS SDK Version 4.3.

Does Monotouch work within Xcode? I'm not sure what it is. If so then Interface Builder does not open a separate window in Xcode 4. When you first go to your .xib, you must select your "Window" to see the window. Otherwise you get an empty grid. Here's an image with the "Window" selected. I have it set for Mac applications not iOS but what you have should look similar.

Forms 6i is not connecting with Oracle 11g database?

Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?

Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N

Form is not opening in oracle apps

Hi,
I have installed apps 11.5.10.2. installation went successfull with out any issues.
i am able to open raouf.oracle.com:8000 and able to login.
Responsibility page is getting opened.
when i am click to open the form...in any responsibility. netscape navigator
getting closed...tried with mozilla as well with IE 8..got the similar issue...
Following error i see in the log file.
mod_jserv.log
[06/12/2009 10:43:05:937] (EMERGENCY) ajp12: can not connect to host 123.201.146.30:17000
[06/12/2009 10:43:05:953] (EMERGENCY) ajp12: function connection fail
[06/12/2009 10:43:07:031] (EMERGENCY) ajp12: can not connect to host 123.201.146.30:16000
[06/12/2009 10:43:07:031] (EMERGENCY) ajp12: function connection fail
Host file entry i have:
127.0.0.1 localhost raouf.oracle.com
169.254.25.129 raouf.oracle.com
123.201.70.57 raouf.oracle.com
iAS\Apache\Apache\aferror.og
[Dec 6, 2009 2:21:09 AM GMT+05:30]:1260046269125:Thread[Thread-250,10,main]:-1:-1:raouf:123.201.67.104:8100:16000:UNEXPECTED:[fnd.framework.OAException]:Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: Io exception: Got minus one from a read call; (Could not lookup message because there is no database connection)
[Dec 6, 2009 2:21:09 AM GMT+05:30]:1260046269125:Thread[Thread-250,10,main]:-1:-1:raouf:123.201.67.104:8100:16000:UNEXPECTED:[fnd.framework.OAException]:Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: Io exception: Got minus one from a read call; (Could not lookup message because there is no database connection)
Can you please help me on this.
Thanks

Hi,
Host file entry i have:
127.0.0.1 localhost raouf.oracle.com
169.254.25.129 raouf.oracle.com
123.201.70.57 raouf.oracle.comWhy do you have two entries for the same host? Please edit this file, and make sure you have one IP Address for "raouf.oracle.com", run AutoConfig on the database/application tier nodes then try again.
For the browser, make sure you use a certified client OS/Browser.
Regards,
Hussein

Form builder is closing automatically on Centos Linux

Hi All,
I have install form 10g (10.1.2.0.2) on centos Linux operating system but at the time of working on form builder it is closing atomically very frequently and second issue when I am opening record group for change in query it show blank after clicking on query text.
Please help me it very urgent.
Thanks in Advance.

I would first recommend that you start by looking at the product certification guide to determine if your platform was certified:
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Next, if you are finding that the Builder(s) do start, but crash in some conditions, I would recommend installing the latest (and last) patch for 10.1.2.0, which is 10.1.2.3 (Patch ID 5983622)
If you do not have a MyOracleSupprt (http://supporthtml.oracle.com) account, you will not be able to obtain this patch.
http://www.oracle.com/us/support/index.html

Forms builder crashes when opening any pll

Hi,
I have gotten this problem that my forms builder crashes immediately when I try to open any pll file. (There is nothing wrong with the pll file - my colleagues can open these files with no problems on their computers). It crashes before the pll file is even remotely loaded - almost as if it encounters an error during the parsing of the pll file.
I have no problem opening and editing fmb files in my forms builder.
This problem has not always existed but it came all of a sudden one day and since its been impossible for me to open a pll file and its getting annoying :P
I run:
- Windows XP SP3
- Forms builder version info :
Forms [32 Bit] Version 6.0.8.26.0 (Production)
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Oracle Toolkit Version 6.0.8.25.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.25.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
I tried deleting everything under D:\ORA6i where its installed and then reinstalling it - but the problem is still there.
Does anyone have an idea about what could be wrong - because I am clueless atm. - could it be some registry settings that somehow got changed maybe ?
Edited by: [email protected] on Sep 3, 2008 5:06 AM

I have encountered various issues like this with Forms 6i over time and have tried numerous things to fix them - including complete uninstall of all Oracle products and reinstalls and the one thing I found to work best was to run a Registry Cleanup tool. I had the best success with Microsoft's RegClean.exe tool (originally released as a PowerTool), but it is getting harder to find now that Microsoft has desupported it and pulled it from their web site. There are a few places where you can still get it; www.cnet.com, www.zdnet.com, and www.majorgeeks.com just to name a few. Other Registry Tools will probably work fine as well, but this is the one I have history with. I did not have 100% success by cleaning the registry, but 50 to 75% of the time it fixed the issue without having to uninstall and reinstall Oracle Forms.
Disclaimer: Please exercise caution when doing anything with the Windows Registry. The smallest change could have serious effects. Always backup the registry or create a restore point with System Restore before you make any changes to the Registry!
Hope this helps.
Craig...
If my response or someone else's response answers your question - please mark your question answered. Thanks.

XML Form Builder does not load

I am having the following problem, when executing the Form Builder tool under Content Management, it does not load and i get the following error message:
CONNECTION ERROR: couldn't read response code*
And sometimes the window gets freezed.
I have read some previous Threads regarding this issue but the solution did not work to me.
Someting really strange is happening because if i log to port 80 (http://...) it works, but when I log to port 50000 (https://...) it does not, and that error message pops up.
I have alredy run the Enviroment check Tool and results were OK in both urls, as follows:
<i><b>https://*****.net/irj/portal
Test Environment: XML Forms Builder Environment Check *
Start Time: 2006-12-05 13:12:48                       *
End Time: 2006-12-05 13:12:04                         *
- Test: Java Environment
- OK
-      Start Time: 2006-12-05 13:12:48
-      End Time: 2006-12-05 13:12:48
-      Java Runtime Version is 1.4.2_13
- Test: Connection Tests
- OK
-      Start Time: 2006-12-05 13:12:48
-      End Time: 2006-12-05 13:12:04
     - Test: Download XML Forms Builder Jar
     - OK
     -      Start Time: 2006-12-05 13:12:48
     -      End Time: 2006-12-05 13:12:13
     -      Successfully loaded XML Forms Builder Jar from https://***net/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
     - Test: Download SAP XML Toolkit Jar
     - OK
     -      Start Time: 2006-12-05 13:12:13
     -      End Time: 2006-12-05 13:12:47
     -      Successfully loaded SAP XML Toolkit Jar from https://****/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
     - Test: XML Forms Builder Version
     - OK
     -      Start Time: 2006-12-05 13:12:47
     -      End Time: 2006-12-05 13:12:48
     -      XML Forms Builder client version is 6.4.1, server version is 6.4.1
     - Test: Load Global Settings
     - OK
     -      Start Time: 2006-12-05 13:12:48
     -      End Time: 2006-12-05 13:12:48
     -      Successfully loaded XML Forms Builder settings
     - Test: Load Project List
     - OK
     -      Start Time: 2006-12-05 13:12:48
     -      End Time: 2006-12-05 13:12:03
     -      Successfully loaded project list:
http://*******.net/irj/portal
Test Environment: XML Forms Builder Environment Check *
Start Time: 2006-12-05 14:12:33                       *
End Time: 2006-12-05 14:12:46                         *
- Test: Java Environment
- OK
-      Start Time: 2006-12-05 14:12:33
-      End Time: 2006-12-05 14:12:33
-      Java Runtime Version is 1.4.2_13
- Test: Connection Tests
- OK
-      Start Time: 2006-12-05 14:12:33
-      End Time: 2006-12-05 14:12:46
     - Test: Download XML Forms Builder Jar
     - OK
     -      Start Time: 2006-12-05 14:12:33
     -      End Time: 2006-12-05 14:12:23
     -      Successfully loaded XML Forms Builder Jar from http://****.net/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
     - Test: Download SAP XML Toolkit Jar
     - OK
     -      Start Time: 2006-12-05 14:12:23
     -      End Time: 2006-12-05 14:12:27
     -      Successfully loaded SAP XML Toolkit Jar from http://*******.net/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
     - Test: XML Forms Builder Version
     - OK
     -      Start Time: 2006-12-05 14:12:27
     -      End Time: 2006-12-05 14:12:28
     -      XML Forms Builder client version is 6.4.1, server version is 6.4.1
     - Test: Load Global Settings
     - OK
     -      Start Time: 2006-12-05 14:12:28
     -      End Time: 2006-12-05 14:12:29
     -      Successfully loaded XML Forms Builder settings
     - Test: Load Project List
     - OK
     -      Start Time: 2006-12-05 14:12:29
     -      End Time: 2006-12-05 14:12:46
     -      Successfully loaded project list:
</b></i>
Don't know what can be, so if anyone has any idea it would be very helpful.
Cheers,
Ivan Milkovic

Hello,
Immediately after opening the XML forms editor from the Content Manager page, you will get a link Start Environment Check Tool.... Click on that and proceed for a check. It will take some 5-10 mins based on your connection speed.If every thing is successful, clear the browser cache and restart the browser and open forms editor again. It will open the data schema and properties filed and project browser and all.
I was having this problem just now and i resolved it with the above steps.
My JRE version is 1.6 and portal is EP 7 SPS 21 patched.
Regards
BP

Xml form builder- DataSchema not expanding

Hi Experts,
I am facing a strange issue in XML form builder.
When i am trying to expand DataSchema root node by clicking on the + sysmbol. It is not expanding.
Is there any particular setting or what for this. I have tried this many time but unable to expand data Scheme and not able to create any nodes under DataSchema.
Please help me in resolving this issue.

Hello,
Immediately after opening the XML forms editor from the Content Manager page, you will get a link Start Environment Check Tool.... Click on that and proceed for a check. It will take some 5-10 mins based on your connection speed.If every thing is successful, clear the browser cache and restart the browser and open forms editor again. It will open the data schema and properties filed and project browser and all.
I was having this problem just now and i resolved it with the above steps.
My JRE version is 1.6 and portal is EP 7 SPS 21 patched.
Regards
BP

Forms 6i do not compile on Oracle 10.2.0.4

We are currently using Oracle Forms 6i (patch 18) and have recently upgraded from 10.2.0.3 to 10.2.0.4. This was done on a test environment since we are doing testing regarding the upgrade. The issue is there is just this one form that does not compile. When I hit ctrl-t, it disconnects (from oracle forms builder). I have deduced that there is this record group that is causing the disconnects. It is select from a base table (please see query below). When I remove the record group, the form compiles fine. Everything was fine on 10.2.0.3.
Since this version has been desupported for a long long time, metalink won't help. I'm hoping that someone has an idea regarding this matter. Please don't ask me why we're still using this version. Of course, it's a management thing. :)
Any help is greatly appreciated. Thanks in advance.
SELECT *
FROM distribution_type_refs dtr
WHERE EXISTS (
SELECT '1'
FROM network_distributions nd
WHERE nd.distribution_type_id = dtr.distribution_type_id
AND log_number = :bl_networks.log_number
AND active_ind = 'Y' )
AND 'Y' =
CASE
WHEN :bl_networks.agreement_id IS NOT NULL
THEN dbpk_specials.fnc_agr_net_dist_valid_ind
( :bl_networks.agreement_id
, :bl_networks.log_number
, dtr.distribution_type_id
ELSE 'Y'
END
AND ( :bl_sp_decoders.ua_type_id = dbpk_constants.ua_type_internal
OR dtr.signal_definition_code =
COALESCE
dbpk_specials.fnc_decoder_signal_definition
( :bl_sp_decoders.base_unit_address
, :bl_sp_decoders.unit_address )
, DECODE ( :bl_networks.ua_count
, 1, dtr.signal_definition_code
, :bl_networks.first_signal_definition_code
, dtr.signal_definition_code
ORDER BY dtr.display_order

First thing to do is get rid of the "Select *" by changing the * to the actual column list.
That may be the only problem. However, I do recall someplace we had trouble with the order-by clause in record groups as well. Try removing it to see what happens. Try using 'Order By 1" (changing the 1 to whatever column number the display_order column is in).
And don't apologize for using Forms 6i. Many of us still use it.
By the way, using "Select *" anywhere in Forms is dangerous, since Forms runs from a compiled module, and Oracle does not automatically recompile it if the underlying objects change. So if your table on which you have written a Select * gets changed, the form will fail when it tries to do the select. Instead, ALWAYS specify the exact columns you need to select from the table.
By the way #2: If you enclose your code within [code]....[/code] tags, your indentation will be preserved.
Edited by: Steve Cosner on Jul 7, 2009 10:10 AM

Help! My Oracle Form builder 11g can't conect Oracle database(11g/10g)

I have installed
1.Oracle Database 11g Release 2 Standard edtion
2.WebLogic Server (10.3.3)
3.Portal, Forms, Reports and Discoverer (11.1.1.3.0)
after install I try run the test.fmx is ok!
But I want used form builder 11g connect my database 11g(installed at same host),
It connect appeared ORA-12154: TNS: could not resolve service name.
I search all about middleware folder in my PC , then find two tnsnames files and two sqlnet.ora
the sqlnet.ora content is
#==============================================================
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
#==============================================================
the tnsnames.ora content is(copy same content from oracle database 11g's tnsnames.ora)
#==============================================================
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = test1.XXX.com.tw)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.XXX.com.tw)
#==============================================================
The I update all of my PC's tnsnames.ora like above string,but it always not work
somebody help me,thanks!!

Ronald,
I was able to connect to a database with Forms 11g by adding an Environment variable TNS_ADMIN and pointing this to the directory where the sqlnet.ora and tnsnames.ora files are located. I was unable to find a Net Configuration Assistant in Forms 11g and placing a copy of .ora files in the /%11G HOME/NETWORK/ADMIN didn't work either. Only after I added the environment variable was I able to connect.
There might be a "More Appropriate" solution, but this is what worked for me. We are just now testing 11g, but are still developing with 10g R2.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Sep 16, 2010 8:43 AM

Ralink RA3290 does not work on Oracle Linux

I have just bought a new HP Pavilion G6-2213so which seems to have a ralink rt3290 wifi chipset
(Just so you know I'm not very experienced with linux when it comes to install new drivers etc)
I have installed:
Red Hat Enterprise Linux Server release 6.3 (Santiago)
Linux hp-v074617 2.6.39-300.17.2.el6uek.x86_64
I have downloaded a driver from mediatek, unzipped it and
ran
make
make install
modprobe rt3290sta
When I run i got
lsmod|grep rt3290
rt3290sta 1255193 0
iwconfig
lo no wireless extensions.
ra0 Ralink STA
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
eth0 no wireless extensions.
rfkill list all
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
dmesg|grep rt3290
rt3290sta: module license 'unspecified' taints kernel.
(Related to GPL I think but not sure if it has an impact)
To me it seemes that the system are aware of my wifi card but still I can not get any wifi connection
Apprecate if someone can tell me if I missed something or what other steps I need to do to make it work
Best regards
Magnus

Support and demand for Wifi on a Linux enterprise server system (RHEL based) is generally limited and usually a desktop system requirement, for which other more suitable Linux distributions exist.
You need to be 100 % about the model of your Wifi adapter.
What is the output of lspci -v related to your Wifi adpater?
Does the driver you download support the Oracle UEK2 kernel (2.6.39)?
You could try your installation starting the system from the original RHEL kernel at the Grub menu to see if it makes any difference. If HP support nor the OS installation provides a driver for your hardware, check http://elrepo.org/tiki/tiki-index.php which focuses on hardware related packages to enhance Enterprise Linux.

Form builder is not opening in oracle linux

Similar Messages

Maybe you are looking for