Form Builder - What is it and How to use it ?

Hi All .
If you are familiar with Form Builder , please refer me any document or links . I have heard about form builder but i did not find any documents on it .
i am using ECM 11g .
Thanks,
Amitava
Email : [email protected]

RAS or Report Application Server offers services to modify report at runtime. To use it you need CR server or Enterprise level product. If you want to just view the report in an optimized way then you should rather use Page Server. To use Page server you again need Enterpriseserver level product and report in managed environment.
JRC can cause performance bottleneck but there are several other factors that influence report performance such as DB type, how complex ig the report is, how is grouping performed at server side or at Crystal etc. Also, if report takes longer to run the Designer it would take at least that much time to run in JRC application.
Look at the following link for Developer DocumentationAPI specification for RAS and Enterprise if you want to explore RAS option further.
https://www.sdn.sap.com/irj/boc/businessobjects-sdklibrary
Thanks
Aasavari

Similar Messages

How to create PDF with Form Builder (T-Code:SPF) and how to use it?

How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

PDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
When I am playing a song, the "airplay" button isn't even visible.
I am sure that the apple tv setting is on as well. Is there anything else you can help me with?

VPN. What's this and how to use it?

Hello,
Recently I started to work from home and not the office. To connect to my work server my company's sysadmin sent me the requisites to connect to VPN (I need to ssh to my work server but it's allowed to the limited set of IPs). But I have no idea what to do next. How to set up the connection and how to use it?
Thanks

Thanks! I've tried to follow the steps described in the wiki article but unfortunately stucked on 'Making Your Connection' section:
# pon tunnel debug dump logfd 2 nodetach
pppd options in effect:
debug # (from command line)
nodetach # (from command line)
logfd 2 # (from command line)
dump # (from command line)
noauth # (from /etc/ppp/options.pptp)
refuse-pap # (from /etc/ppp/options.pptp)
refuse-chap # (from /etc/ppp/options.pptp)
refuse-mschap # (from /etc/ppp/options.pptp)
refuse-eap # (from /etc/ppp/options.pptp)
name pshevtsov # (from /etc/ppp/peers/tunnel)
remotename PPTP # (from /etc/ppp/peers/tunnel)
# (from /etc/ppp/options.pptp)
pty pptp xx.xx.xx.xx --nolaunchpppd # (from /etc/ppp/peers/tunnel)
crtscts # (from /etc/ppp/options)
# (from /etc/ppp/options)
asyncmap 0 # (from /etc/ppp/options)
lcp-echo-failure 4 # (from /etc/ppp/options)
lcp-echo-interval 30 # (from /etc/ppp/options)
hide-password # (from /etc/ppp/options)
ipparam tunnel # (from /etc/ppp/peers/tunnel)
proxyarp # (from /etc/ppp/options)
nobsdcomp # (from /etc/ppp/options.pptp)
nodeflate # (from /etc/ppp/options.pptp)
require-mppe-128 # (from /etc/ppp/peers/tunnel)
noipx # (from /etc/ppp/options)
using channel 28
Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
Script pptp xx.xx.xx.xx --nolaunchpppd finished (pid 26089), status = 0x0
Modem hangup
Connection terminated.
I don't know what to do

On-The-Go Playlist: what is it and how to use?

I've read the notice on the iPod when you select the On-the-Go playlist but don't know what it does and how to best use it. I've tried to add a song to it by holding down the center button while the song was playing but don't know how to check to see if it's been added. When I go to the On-the-Go playlist in the menu I only get the text instructions. Can someone describe how to add, and remove, songs from it or tell me if you can and how to use it?
OT

EDIT: BAH! I posted too slow... but there is still some information about saving and clearing in there
Its for making a playlist while your 'on the go'. So you click and hold the middle button the selected song (or album) should flash... Then you go into the playlist menu (music>playlists>on-the-go) and use it like any normal playlist...
When there's songs on the playlist it gives you the option to save or clear at the end of the song list, you select either one and it'll ask for conformation.
It works in both manually sync and auto sync mode. But if you have it on auto sync the play list will be created in iTunes...
So I'm not sure why you don't see songs in it after yo assign them to it, try sending a whole album and then music>playlists>on-the-go the album songs should be listed.
As for reasons to use it well maybe while out and about you realise that you want to hear from two artists at the same time, Radiohead and Bowie, in a shuffle mode. You could make it a on-the-go playlist. Or there's a few podcasts you want to hear in order... so you go down the list and assign them to on-the-go.
Some people use the On the go to note songs that need to be looked at in iTunes later, maybe because its too quiet, badly imported or they don't understand how such a bad song found its way onto the iPod.
Once you save it if you try and put more songs to it, 'on-the-go-1' will be created.
-hope this helps

What is PKCS7 and how to use it?

Hi! I'm in a project in which I must send a file encrypted with a key that is also encrypted with a public key, the receiver must decrypt the key using his(her) private key, and then, using that decrypted key to in turn decrypt the file.
I've been told to use PKCS7 standard, but is not clear for me how it works, and how to use it. I use bouncycastle, and know that it has APIs to do something like this.
Any light will be greatly appreciated!

Look at the CMS functionality in the bouncycastle provider, in the bcmail distro. You can find some examples in the bcmail distro also. Maybe I'll post an example later.

Can someone explain the OCI cocncept to me, what it does and how to use it?

Bit a newbie question, but whta does the OCI do, and how does it work.Start from the base.
Peter

http://www.orafaq.com/faqoci.htm
"The Oracle Call Interface (OCI) is a set of low-level APIs (Application Programming Interface Calls) used to interact with Oracle databases. It allows one to use operations like logon, execute, parse, fetch, etc. OCI programs are normally written in C or C++, although they can be written in almost any programing language."

What is RAS and how to use it?

Hi All,
In my apllication, i am displaying the report using JRC.
But it is too slow.
I heard that using RAS we can consume the time.
But i dont know anything about RAS.
Does it need any Jar?
does it need any report server?
and so on....
Can any help me to achieve the task.
Thanks in advance,
Saravanakumar.

RAS or Report Application Server offers services to modify report at runtime. To use it you need CR server or Enterprise level product. If you want to just view the report in an optimized way then you should rather use Page Server. To use Page server you again need Enterpriseserver level product and report in managed environment.
JRC can cause performance bottleneck but there are several other factors that influence report performance such as DB type, how complex ig the report is, how is grouping performed at server side or at Crystal etc. Also, if report takes longer to run the Designer it would take at least that much time to run in JRC application.
Look at the following link for Developer DocumentationAPI specification for RAS and Enterprise if you want to explore RAS option further.
https://www.sdn.sap.com/irj/boc/businessobjects-sdklibrary
Thanks
Aasavari

What is Webservice and how to use Webservice in iOS6 programming? howmany Webservices are available in iOS?

Please show me the examples of webservices.

This looks like a question for the developer's forum. Here is a possible information link: http://mobile.tutsplus.com/tutorials/iphone/ios-quick-tip-interacting-with-web-s ervices/

What is mib and how to use

Hi,
I am new to mib world. I want to use mib in order to pull some information about routers health as below
CPU usage utilization
Free Memory
Interface Drops statistics
Environmental Parameter (temperature / power)

Look at the CMS functionality in the bouncycastle provider, in the bcmail distro. You can find some examples in the bcmail distro also. Maybe I'll post an example later.

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Mac OS X 10.6.8 desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

You need to fresh install 10.6, programs fresh form original sources and return only vetted files (no TM migrations) from a regular storage drive
But this when erasing the drive use the Security Option: Zero All Data before installing 10.6
What has happened your data got corrupted and it's corrupted on the TM drive too.
So the Zero will map off bad sectors on your drive, the 10.6 install will be fresh, the programs will be fresh and only files will be returned, you'll find out in short order which ones they are.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
Once you are back up, then consider making a option key bootable clone.
Most commonly used backup methods explained

What is Netweaver and How Visual compser is linked to Netweaver

Hi guru
Tell me What is Netweaver and How Visual compser is linked to Netweaver
Thanks in advace

Hi namit,
NetWeaver is a SOA plattform. It allows to build business application with the services and the tools, which are released by the SAP. Enough said about that, you can find so much information about NetWeaver in the internet and of course of the SAP websites and here in the SDN. NetWeaver is the future for business applications.
Visual Composer is part of the SAP Portal, which is part of the NetWeaver.
You can also get information about VC in the<a href="https://wiki.sdn.sap.com/wiki/display/VC/Main">VC wiki</a>.
Best Regards,
Marcel

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

Form Builder - What is it and How to use it ?

Similar Messages

Maybe you are looking for