Form connot be imported because ones or more errors occured-infopath 2010

when trying to import word documents (docx) in InfoPath I get "the form cannot be imported because one or more errors occurred" but there are no errors listed in the box.
what should I be checking to resolve

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Similar Messages

Some of the apps in your iTunes were not installed in the iPhone because one or more errors occurred.

I have a Mac Air and an iPhone 5 and I have the latest iTunes installed and I was running Mountain Lion but, I upgraded to Mavericks thinking the upgrade will fix the problem but, I still have problems with my apps. For some reason it doesn't want to install back 119 apps and I tried to use the "Transfer Purchases" thing but it did not work. I will appreciate any useful help. Thank you.

I'm going to answer myself this posting since I had a chat with one of the Apple support person and that person resolved my problem. Basically in iTunes I clicked on the iTunes Store and on the right side of the iTunes, it shows the "Quick Links", so I clicked there and I went to "Purchased" and I downloaded "All" my apps and that pretty much fixed my problem with the exception that, I had to manually download from my own phone some apps but once I had all my apps updated and my phone configured in the way I wanted, I performed another "sync" and no more error messages. I'm posting this in case someone else have the same problem.

HT5457 Upgraded iphone 4 to IOS 6.1 Can not restore apps. "Some of the applications in your iTunes library were not installed because one or more errors occurred" error message

I made the mistake of upgrading my iPhone 4, a seemingly innocuous task if you follow the Apple commercials' rhetoric.
Now I can not restore any of my apps and before I go to far, I am wondering if I wil be able to restore my purchased apps?
Is there an easy fix, before I waste hours on the phone with Apple tech support?
Why is it becoming so complicated to run a telephone?
Thanks
O

I made the mistake of upgrading my iPhone 4, a seemingly innocuous task if you follow the Apple commercials' rhetoric.
Now I can not restore any of my apps and before I go to far, I am wondering if I wil be able to restore my purchased apps?
Is there an easy fix, before I waste hours on the phone with Apple tech support?
Why is it becoming so complicated to run a telephone?
Thanks
O

One or more errors occurred using google drive api

Hi,
I am trying to use the Google Drive API in my C# application with the below code but getting the following error:
System.AggregateException was unhandled
HResult=-2146233088
Message=One or more errors occurred.
Source=mscorlib
StackTrace:
at System.Threading.Tasks.Task.ThrowIfExceptional(Boolean includeTaskCanceledExceptions)
at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at System.Threading.Tasks.Task`1.get_Result()
at WindowsFormsApplication1.frmMain.btnUpload_Click(Object sender, EventArgs e) in c:\Users\CakeBoutique\Documents\Visual Studio 2012\Projects\WindowsFormsApplication1\WindowsFormsApplication1\main_form.cs:line 35
at System.Windows.Forms.Control.OnClick(EventArgs e)
at DevExpress.XtraEditors.BaseButton.OnClick(EventArgs e)
at DevExpress.XtraEditors.BaseButton.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at DevExpress.Utils.Controls.ControlBase.WndProc(Message& m)
at DevExpress.XtraEditors.BaseControl.WndProc(Message& msg)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at WindowsFormsApplication1.Program.Main() in c:\Users\CakeBoutique\Documents\Visual Studio 2012\Projects\WindowsFormsApplication1\WindowsFormsApplication1\Program.cs:line 26
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
InnerException: System.IO.FileNotFoundException
HResult=-2147024894
Message=Could not load file or assembly 'Microsoft.Threading.Tasks.Extensions.Desktop, Version=1.0.16.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Source=Microsoft.Threading.Tasks
FileName=Microsoft.Threading.Tasks.Extensions.Desktop, Version=1.0.16.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
FusionLog==== Pre-bind state information ===
LOG: User = JASSIM-RAHMA\CakeBoutique
LOG: DisplayName = Microsoft.Threading.Tasks.Extensions.Desktop, Version=1.0.16.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
(Fully-specified)
LOG: Appbase = file:///C:/Users/CakeBoutique/documents/visual studio 2012/Projects/WindowsFormsApplication1/WindowsFormsApplication1/bin/Release/
LOG: Initial PrivatePath = NULL
Calling assembly : Google.Apis.Auth.PlatformServices, Version=1.8.1.31699, Culture=neutral, PublicKeyToken=null.
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\CakeBoutique\documents\visual studio 2012\Projects\WindowsFormsApplication1\WindowsFormsApplication1\bin\Release\WindowsFormsApplication1.vshost.exe.Config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Post-policy reference: Microsoft.Threading.Tasks.Extensions.Desktop, Version=1.0.16.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
LOG: Attempting download of new URL file:///C:/Users/CakeBoutique/documents/visual studio 2012/Projects/WindowsFormsApplication1/WindowsFormsApplication1/bin/Release/Microsoft.Threading.Tasks.Extensions.Desktop.DLL.
LOG: Attempting download of new URL file:///C:/Users/CakeBoutique/documents/visual studio 2012/Projects/WindowsFormsApplication1/WindowsFormsApplication1/bin/Release/Microsoft.Threading.Tasks.Extensions.Desktop/Microsoft.Threading.Tasks.Extensions.Desktop.DLL.
LOG: Attempting download of new URL file:///C:/Users/CakeBoutique/documents/visual studio 2012/Projects/WindowsFormsApplication1/WindowsFormsApplication1/bin/Release/Microsoft.Threading.Tasks.Extensions.Desktop.EXE.
LOG: Attempting download of new URL file:///C:/Users/CakeBoutique/documents/visual studio 2012/Projects/WindowsFormsApplication1/WindowsFormsApplication1/bin/Release/Microsoft.Threading.Tasks.Extensions.Desktop/Microsoft.Threading.Tasks.Extensions.Desktop.EXE.
StackTrace:
at Microsoft.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at Microsoft.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccess(Task task)
at Microsoft.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
at Microsoft.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Google.Apis.Auth.OAuth2.GoogleWebAuthorizationBroker.<AuthorizeAsync>d__1.MoveNext() in c:\code\google.com\google-api-dotnet-client\default\Tools\Google.Apis.Release\bin\Debug\output\default\Src\GoogleApis.Auth.DotNet4\OAuth2\GoogleWebAuthorizationBroker.cs:line 54
InnerException:
here is the code:
UserCredential credential = GoogleWebAuthorizationBroker.AuthorizeAsync(
new ClientSecrets
ClientId = "xxxxxxxxx",
ClientSecret = "xxxxxxxxx",
new[] { DriveService.Scope.Drive },
"user",
CancellationToken.None).Result;
// Create the service.
var service = new DriveService(new BaseClientService.Initializer()
HttpClientInitializer = credential,
ApplicationName = "Drive API Sample",
File body = new File();
body.Title = "My document";
body.Description = "A test document";
body.MimeType = "text/plain";
byte[] byteArray = System.IO.File.ReadAllBytes("c:\\temp\\mygdriver.txt");
System.IO.MemoryStream stream = new System.IO.MemoryStream(byteArray);
FilesResource.InsertMediaUpload request = service.Files.Insert(body, stream, "text/plain");
request.Upload();
File file = request.ResponseBody;
Console.WriteLine("File id: " + file.Id);
Console.WriteLine("Press Enter to end this process.");
Console.ReadLine();
Kindly advise...

Hello,
For issues regarding google APIs, please post it to:
https://developers.google.com/maps/support/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The operation can't be completed because one or more required items can't be found. (Error code -43)

When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

I get an error -36.
I did the dot_clean in the terminal.
Did not fix it.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

Firefox not responding, seems like other browser is hijacking inquiry, will not let me reset, states cannot reset because one or more windows are open

when i type in a search, firefox says it's not responding. Although firefox still showing not responding I am taken to websites that I did not request. I tried to reset firefox but it said there is a problem because one or more windows tabs are open even though they are not.
What is cloudnet? just one of the items that pops up on the bottom right of the screen during my search

Getting redirected to unwanted websites can be caused by an add-on, or by external malware, or by a change to your connection settings.
(1) Check Extensions
(A) In Firefox:
Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable. Or if it's clearly crap, remove.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
(B) In the Windows Control Panel
If there is no remove button on the Add-ons page, typically the extension was installed externally and can be removed through the Windows Control Panel, Uninstall a Program.
If you click the "Installed on" column heading to group the entries by date, you may find some undisclosed bundle items that snuck in with some free software. Take out as much trash as possible.
(2) Malware scans
Our support article lists free tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]]. If you notice a pattern of search engine result links being diverted to unrelated pages, this can be a stubborn infection involving a rootkit, so try the TDSS Killer first.
(3) Connection settings
Normally Firefox piggybacks on your IE connection settings. You can change that (or malware might have changed it). To view and modify:
"3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
Change to "No proxy" and see whether that makes any difference.

Cannot remove this sync group because one or more databases are currently provisioning,

I have a problem with a SYNC group within my development Azure Database.
It been stuck in "processing" state last December and has never recovered.
I have since setup a new Sync Group to sync the data between my cloud database and my local database. The new Sync Group is working properly.
It bothers me that the old one is still out there, and I would just like to remove it, but I get the following error message:
Cannot remove this sync group because one or more databases are currently provisioning,
re-provisioning, de-provisioning, canceling sync or synchronizing. TracingId=fe9d220c-56c7-791f-ac0f-ea26989e02a1
Does anyone have any suggestions on how to delete the failed SyncGroup from Azure?

Hi jstevenson72,
How about using the DeprovisioningUtil tool? With DeprovisioningUtil tool , you can manually clean up all objects by running the deprovisioning utility from the same folder where the Data Sync Agent gets installed.
Besides any of the following can result in a failure to delete a sync group.
• The client agent is offline. Be sure that the client agent is online then try again. Reference :
SQL Data Sync Troubleshooting Guide.
• The client agent is uninstalled or missing.
If the client agent is uninstalled or otherwise missing:
1. Remove agent XML file from the SQL Data Sync (Preview) installation folder if the file exists.
2. Install the agent on same/another on-premise computer, submit the agent key from the portal generated for the agent that’s showing offline.
• The SQL Data Sync (Preview) service is stopped.
1. In the Start menu, search on Services.
2. Click Services in the Programs section of the search results.
3. Find the SQL Data Sync (Preview) Preview service.
4. If the service status is Stopped right-click the service name and select Start from the dropdown menu.
• A database is offline. Check your SQL Database and SQL Server databases to be sure they are all online.
• The sync group is provisioning or synchronizing. Wait until the provisioning or synchronizing process finishes then retry deleting the sync group.
And for Azure issues, I would like to recommend you post the question in the Azure SQL Database forum at
https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=ssdsgetstarted. It is appropriate and more experts will assist you.
There is also a similar thread for your reference.
https://social.msdn.microsoft.com/Forums/en-US/d0c50049-4d20-447e-85f9-904f7d146a40/cannot-remove-a-data-sync-group-even-dropping-the-involved-databases-and-servers?forum=ssdsgetstarted
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Items in the Itunes library were not copied because of one or two errors occurred. How to fix this problem?

Items in the Itunes library were not copied because of one or two errors occurred. How to fix this problem?

Hello mobyash,
Have you tried converting each of these 8 tracks to a different file format and seeing if they will then sync to your iPod. See this Apple support document for information and instructions on how to convert a song to a different format.
iTunes: How to convert a song to a different file format
B-rock

One or more errors were found while trying build the realse version

While i am generating .ipa file i am getting another error mentioned below.
One or more errors were found while trying build the realse version
Packing error while generating .ipa file for iphone.

This is a forum for Adobe Acrobat Froms not the Flash/Flex product.

Form connot be imported because ones or more errors occured-infopath 2010

Similar Messages

Maybe you are looking for