Form execution problem

Hi,
I created one form using ODS 10g and runned it by using internet explorer 7
it's downloaded and installed jinit eventough it's not running/displaying form
kindly update me with solution as soon as possible.
Regards,
Md Jahangir Pasha

yeah brother I have gone through that also
and that help to solve many issues but
recently i am getting some different problems
Yeah I am running from the form builder I am running IE 8.0.6 64-bit and I have installed jre 7 in (C:\ where as my database and ODS is installed in E:\) and i installed jinit 1.3.0 too for safer side and I have done modifcation to default.env and formsweb.cfg file to look for jre instead of jinit
Even tough IE8 is giving an error that "Low version of jinit is installed" and not displaying any content.
Do I have create any Environmental variables?
Do I change browser if yes shall I go for chrome will it work?
please response me as soon as possible
Thanks

Similar Messages

Second Time, RFC execution Problem!

Hi all,
Has any one encountered this problem, when calling RFC First time fine and getting data from BAPI, when i call same RFC again, Second Time, RFC execution Problem!. Any idea!, Now i restarted server, that may cause the problem. Other than this, please give me your idea.
Thanks
Ravi Golla

Hi Bhavik,
In View Controller:
public void onActionCreateProject(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionCreateProject(ServerEvent)
 wdThis.wdGetArchCompController().CreateProject();
 wdThis.wdFirePlugOutToProjectCreationResult();
 //@@end
In Custom Controller:

wdDoInit()
__Arch__Arm_Project_Create_Input create = new __Arch__Arm_Project_Create_Input();
 wdContext.node__Arch__Arm_Project_Create_Input().bind(create);
public void CreateProject( )
 //@@begin CreateProject()
 try
 wdContext.current__Arch__Arm_Project_Create_InputElement().modelObject().execute();
 wdContext.nodeOutput().invalidate();
 catch(WDDynamicRFCExecuteException ex)
 wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess(ex.toString());
 ex.printStackTrace();
 //@@end
I am using other functional modules they all working fine, this is one only has problem
Thanks Bhavic.
Regards
Ravi

Multi Block Form Navigation Problem

Hiii
i have got a multi block form the problem that am facing now is that when running the FORM and when am over one of the my canvases then if i tried to press any of :
(Tab button,Down arrow ) the canvas changes to ANOTHER Datablock ...
i dont know what is the problem ....
ANY SUGGESTIONS
OMD

Make the datablock you want to show on top as the first block in the object navigator.
HTH.
Regards,
Arun

QA08 execution problem

Hi all,
QA08 execution problem, one material lying in QA32 stock that is cancel condition only (qa32 status for the material is LTCA, CALC) so I canu2019t deactivate the insp type through QA08, kindly help me to solve the problem.

Hi,
Thanks a lot your suggestion is 100% correct, problem has solved.
Regards,
Karthick.

Problem in Adobe Form Execution

Hi,
I am getting an error "ADS: SOAP Runtime Exception: CSoapExceptioFault: SOAP(100102)" while executing Adobe Form.
It seems the ADS configuratoin is not correct. Can some help me out in fixing this issue.

Hi Sathish,
To check the Present configuration do the following:
1.1 Checking by Executing Test Report FP_TEST_00
Use
This test report checks if your system is configured correctly for processing forms in an ABAP environment.
Procedure
   1. Log on to your SAP Net Weaver AS ABAP.
   2. Call transaction SA38 and enter the name FP_TEST_00.
   3. Choose Execute (F8). A dialog box is displayed.
   4. Enter FP_TEST_00 in the field Form.
       This is displayed as the default form name.
   5. Enter the name of the connection to the ADS. Enter the default name ADS, or, if you have               specified another name, the one you are using in your system.
   6. In the dialog box, choose Output in Print Preview.
   7. Enter an appropriate device type in the field Output Device.
   8. Choose Print Preview.
On successful execution of the report, you find the Print Preview of the PDF form.
If the Configuration is not correcr no form is displayed.
The following steps are only necessary, if the result of the above test was not successful.
    2. Check the ABAP Connection
    3. Check the User and Password
    4. Check the Destination Service
1.2 Checking the ABAP Connection
Use
This is a test for checking the RFC destination. This test applies to both connections using Basic Authentication and SSL connections.
Procedure
1. Log on to your SAP system.
2. Call transaction SE38.
3. Enter the name of the test report FP_PDF_TEST_OO.
4. Enter the name of the connection. Enter the default name ADS, or, if you have specified another name, the one you are using in your system.
5. Choose Execute (F8).
Result
If the configuration is correct, the system displays the version number of the Adobe document services.
If the configuration is not correct, the system displays a corresponding message.
or
Go to the following link to download the complete ADS configuration guide:
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e4e9afb-0701-0010-f8a8-b8cd093662c2]
Hope to solve your problem.
Regards,
Vaibhav Tiwari.

Script execution problem

dear sir
i got a problem with script execution. i have successfully activate the form painter in ABAP editor. but i am getting the error like "Form ZLASRISUD language EN is not active and has no errors". please give me the solution for above as soon as possible.

dear sir
i got a problem with script execution. i have successfully activate the form painter in ABAP editor. but i am getting the error like "Form ZLASRISUD language EN is not active and has no errors". please give me the solution for above as soon as possible.

Form printing problem

Hi,
I have used InDesign CS6 to create a user-fillable form and brought into Acrobat X Pro to implement field tab orders, etc.
It's a basic form with a couple of radio button options, a pulldown menu, editable text fields and a Print button.
Everything exports correctly from IDCS6, opens and operates as it should in Acrobat but when I distribute the form the user can not input into the fields nor can they print.
I've actually tested on a separate computer and when I click the print button all that outputs is a blank page (no information).
I am using Mac 10.7.4.
Thanks for any information!

Hi,
I also faced the same problem.
Problem which I have faced mentioning below
The gross amount is not appearing for output type ZH00 for Language French and German for a particular printer WPL4 where as it is appearing for other printers (e.g: W1D6)
Previously the code is like this so it was not printed.
,,,, Total gross amount &KOMK-FKWRT&</> ,,
I have removed the space after Total gross amount and kept ,,,, in the place of space.
,, Total gross amount,,,,&KOMK-FKWRT&</>
Follow the same procedure it will solve your problem.
Reward points if useful.
Thanks & Regards,
Vasudeva Rao.

XML Forms Builder - problem with checkbox

Hi,
I have created many checkboxes in XML Forms Builder and if I want to create a new document based on this "Form" I have still checked one of checkboxes. I would like to have all empty checkboxes becasue user should check the appropriate checkboxes.
Do you know how to resolve this problem?
Thaks for help!
Regards,
Andrzej Tabara

Hi,
is it always the same checkbox that is already filled in? Is this ckeckbox based on a metadata-definition?
If yes: You could maybe have a look at the metadata-definition. Is there maybe a default-value defined?
Kind reagrds
Karin

Using a MAC to fill out PC Created PDF forms creating problems

We have created a number of forms using LiveCycle to be filled out by clients. They include submit buttons that send the form back as a PDF (rather than a data file). The forms were then opened in Acrobat 8 Professional and usage rights enabled to allow the clients to save a copy of the completed form.
They work great...unless the client is using a MAC. We have encountered the following problems with MAC filled forms:
1) client entered data is present but only visible when the field is clicked on
2) the Print and Submit by E-mail buttons do not work for MAC users
3) the tabbing order is inconsistent
Any ideas of ways we can make our forms more compatible for MAC users??
Many Thanks!

Hi Rod,
Sorry I replied a few days ago, but for some reason it didn't seem to get added to the thread. So, here we go again ...
The "fix field" script worked great for me. So, we have been using that solution when needed. Unfortunately, I am not enough of an expert on these things to provide an intelligent answer as to why it may not be working for you.
But, it also became evident from dialogue and testing that the issue only occurs when recipients use MAC Preview to complete the forms. So, on some forms I have just added a note saying - MAC Users: Please complete the form using Adobe Reader. As this is, of course, free software, which most people already have installed on their computer, this seems to prevent the problem from occurring as well.
Hope that is at least a little bit helpful.

Forms installation problem - how do I create a new default Oracle home?

I am new to Oracle so please forgive my utter ignorance. My impression of Oracle because of how an installation
has to be done is taking a nosedive. I thought Microsoft was bad with all the re-booting but the explanation that I
read in Anubhav Seth's post about installing Dev 6i before 8i and the suggestion (not a requirement) to format the
harddisk and reinstall Windows just leaves me with my jaw hanging open. I'm having a little trouble swallowing that
one.
Here's my situation... I'm running 8i at home and I am using it for the Oracle courses that I am taking at a local
university. So 8i with its SQL*Plus has been all I have needed to date. Now we have a project to do that involves forms.
So I go to the OTN page for downloads and downloaded file 6irel2nt.exe which is 264 MB in size. This file, I assume,
has forms in it -- what else I don't know because things are not explained all that well on the web site or I don't know
where to look (which implies poor organization of the web pages).
I run the 6irel2nt.exe file and end up with 11,128 new files on my computer. That's nice. I run the setup file and a step or
two into it it complains that my 'Ora81' home is already being used and that I need to install it into another Oracle Home.
Now I'm trying to find out how I create another Oracle Home. I perform a search in GOOGLE on "creat default Oracle
home" and basically get nowhere. My $50+ "Oracle 8i A Beginner's Guide" from Oracle Press mentions Oracle Home
on one page (pg. 170) but is completely useless in this case. My $184 worth of Oracle University manuals (which
are really PowerPoint slides) is useless too. My next step will be to comb through the FAQs. All this because I cannot
believe that I have to totally uninstall one product to get another to install and then reinstall the first one. That is INSANE!
If I have gone way off track please feel free to blast me but if this is true then all I can say is that the folks at Oracle need
a lesson in KISS (Keep It Simple Stupid)! Computers and computer software are supposed to make our lives simpler
not complicate the holy hell out of them. I'll get off my soapbox now. Sorry about the whining.

I ended up uninstalling 8i and then I installed Dev 6i (Forms) and then I reinstalled 8i. I had some problems
installing Dev 6i because of this error "path.vrf(86): Unbound variable 'path_too_long_prompt'". Right after this error
appears I get a dialog that states, "The Oracle Installer cannot update the system path variable to %new_path%
because it is too long. Please restrict your system path to 127 characters and make sure D:\Oracle\OraWin95\bin
is included in your path."
The path D:\Oracle\OraWin95 was what I set up for this installation.
What I did to work around this problem was this...
(1) Go to Start - Accessories - System Tools - System Information.
(2) Click on the Tools menu
(3) Select System Configuration Utility
(4) Select the Autoexec.bat tab
(5) I added D:\Oracle\OraWin95\bin to my PATH variable and unchecked the checkbox next to one of the several
lines that I have that build my PATH variable. (I have several PATH lines that simply add a path to the system
variable %path%). After the installation is complete you can go back and turn back on the paths that you had disabled.
After installing 8i I did have a problem connecting to the database. I got this error:
Error: ORA-01034 Oracle not available
I believe this happened because I had forgotten to turn back on some of my PATH information that I mentioned
earlier. After checking one of my PATH variables and rebooting, this problem disappeared.
When reinstalling 8i and when the installation asks for an SID and you enter the SID you had used in the original
installation you may get a notice that says the SID already exists. I think this happens because the uninstall does not
clean up the registry totally, so I entered a different one. Later on, after the installation has been completed and you
are connecting to your database, you will be prompted to select an SID -- just make sure that you select the SID from
the latest installation.
I should've mentioned first that in preparing for this whole ridiculous exercise I created a directory under my Oracle
directory that I was going to use as the new 'Oracle home.' So I guess that's all one has to do to create a new Oracle
home -- just have another directory ready to install 'stuff' into.
All in all, this a pretty asinine exercise. Oracle really needs to fix this mess. I honestly thought Microsoft was bad but
this takes the cake. I wonder if SQL Server is this screwed up.

Background Execution Problem-Docking Container with 2 ALV Grids in one scre

Hi Friends,
I have created 2 ALV Grids in one screen - one below another using DOCKING CONTAINER.
The objects are 'g_dock_cont' and 'g_dock_cont1'.
I am getting the foreground output as expected with 2 ALV Grids.
While executing in background (F9), I am getting only output of first ALV grid. Second ALV is not getting displayed in BACKGROUND(F9) mode.
How to solve this.
FORM create_objects.
* Materials with data
IF g_dock_cont IS INITIAL.
 IF sy-batch NE 'X'.
*CREATE THE OBJECT FOR DOCKING CONTAINER
 CREATE OBJECT g_dock_cont
 EXPORTING
 side = cl_gui_docking_container=>dock_at_top
 extension = 300.
 ENDIF.
*CREATE THE OBJECT FOR ALV GRID
 CREATE OBJECT g_alvgrid
 EXPORTING i_parent = g_dock_cont.
 wa_layout-grid_title =
 'Materials with Data'.
ENDIF.
IF NOT I_DETAIL[] IS INITIAL.
CALL METHOD g_alvgrid->set_table_for_first_display
EXPORTING
 IS_VARIANT = WA_VARIANT_STX
 IS_LAYOUT = wa_layout
CHANGING
 it_outtab = I_DETAIL
 IT_FIELDCATALOG = LIT_FIELDCATALOG[]
EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 others = 4
IF sy-subrc <> 0.
ENDIF.
ENDIF.
*MATERIALS WITHOUT DATA
IF g_dock_cont1 IS INITIAL.
 IF sy-batch NE 'X'.
*CREATE THE OBJECT FOR DOCKING CONTAINER
 CREATE OBJECT g_dock_cont1
 EXPORTING
 side = cl_gui_docking_container=>dock_at_bottom
 extension = 300.
 ENDIF.
*CREATE THE OBJECT FOR ALV GRID
 CREATE OBJECT g_alvgrid1
 EXPORTING i_parent = g_dock_cont1.
 wa_layout1-grid_title =
 'Materials without Data'.
ENDIF.
IF NOT I_MARA[] IS INITIAL.
CALL METHOD g_alvgrid1->set_table_for_first_display
EXPORTING
 IS_LAYOUT = wa_layout1
CHANGING
 it_outtab = I_MARA
 IT_FIELDCATALOG = i_fieldcat[]
EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 others = 4
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDFORM. " create_objects
Regards,
Viji.

Hi,
What i was saying is that you need to code again for background mode of execution.
AT END OF SELECTION.
IF SY-BATCH EQ 'X'.
PERFORM DISPLAY1.
PERFORM DISPLAY2.
In DISPLAY1 use REUSE_ALV_LIST_DISPLAY to display data from outtab1.
In DISPLAY2 use REUSE_ALV_LIST_DISPLAY to display data from outtab2.
For example : execute this report in background mode.this will not execute in online mode.
After execution you will get two spools one for KNA1 and one for LFA1 data. Spool can be controlled via IS_PRINT structure.
report zrbackground.
data gt_lfa1 type standard table of lfa1.
data gt_kna1 type standard table of kna1.
start-of-selection.
select * from lfa1 into table gt_lfa1 up to 10 rows.
select * from kna1 into table gt_kna1 up to 20 rows.
end-of-selection.
if sy-batch eq 'X'.
 perform display_lfa1.
 perform display_kna1.
endif.
*& Form DISPLAY_LFA1
 text
--> p1 text
<-- p2 text
form display_lfa1 .
call function 'REUSE_ALV_LIST_DISPLAY'
 exporting
 i_callback_program = sy-repid
 i_structure_name = 'LFA1'
 tables
 t_outtab = gt_lfa1
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " DISPLAY_LFA1
*& Form DISPLAY_KNA1
 text
--> p1 text
<-- p2 text
form display_kna1 .
call function 'REUSE_ALV_LIST_DISPLAY'
 exporting
 i_callback_program = sy-repid
 i_structure_name = 'KNA1'
 tables
 t_outtab = gt_kna1
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " DISPLAY_KNA1
Please let me know if its not clear or you need more info.
Thanks,
Abhishek
Edited by: abhishek sinha on May 8, 2009 7:42 PM
Edited by: abhishek sinha on May 8, 2009 8:45 PM

PDF form submission problem - works in Acrobat and Reader, but not when embedded in browser

Hello everyone,
I am trying to submit a PDF form to an application server.
To do this, I added a "Submit" button to the PDF, configured the server's address and submit format, and tested the button.
I opened the PDF in Acrobat Pro, clicked the button, and my web application received the form in PDF format just as I wanted.
To make it work in Reader, I had to extend user rights via Acrobat Pro, and then the form worked inside Reader as well.
Up to here, everything went fine.
Then I embedded the PDF in a web page (which will be the final scenario) and it all stopped working.
The submit button doesn't do anything anymore, and no data is sent to the application server.
I even tried switching from the form's submit mechanism to calling event.target.submitForm(...) in Javascript directly, but nothing changed (meaning this too worked only when opening the form as an "offline" pdf, but not when embedding it in a web page).
Is there something I am missing? Something else that must be configured/activated in order to be able to submit the PDF when it is in the form of an embedded object?
Many thanks in advance,
Alex

Thanks for your reply, Paul.
I tested the submit button both in Reader 9.3 and Acrobat 8 (which is the same I used to RE the PDF).
Apparently I got it working too, but only by deploying my embedding web page to an application server.
The final environment the PDF will be embedded into will be inside a web application deployed to an application server, so I guess my problem is solved.
It didn't work only when embedded into a local test.html web page saved on my PC...
Thanks again, have a good day.
Alex

Package execution problem with SQLSERVERAGENT

Hello,
I'm having a problem with the execution of SSIS packages: I created locally a package with SQL Server Data Tools, then I deployed it on my server in the SSISDB database. Then I created a job to execute periodically this package with SQL Server Agent. The
package works fine and does everything I want, but I always get a failed notification. In the global view of the execution I can see:
Result: "failed"
Package name: "Package.dtsx"
Task name: "Package"
Execution access path: "\Package"
Every other task returns a success and their execution access path is a subfolder of "\Package". I tried everything I found on the web, check the "Runtime 32bits" box, create a "Job Account" user to execute the package via a
"Job Account Proxy", modify the ProtectionLevel of the package to "DontSaveSensitive", give the "Job Account" user full rights on everything, nothing works.
Do you have an idea of what my problem is and how to solve it?
I must precise that all my packages do the same thing: I have a loop on all the csv files in a folder that for each file loads the contents of the file in my database and the delete the file. I observed that the error message do not appear when there is
no file in the folder when the package executes.
Thanks in advance.

Not sure what error message, is the one "est introuvable.
Cette erreur est retournée par la collection Connections lorsque l'élément de connexion spécifique est introuvable"?
So, here is in short: the ForEach Loop once in its beginning of operation "senses" the files currently present in the working folder. If a new file arrives after this stage, it will not see it.
In your case it seems that the ForEach "saw" a file at the beginning, but it was gone at the time the processing wanted it for execution.
Like many above indicated, the common practice, call
it elegant or not is to indeed move the files to a different directory (working folder). This is done to avoid collisions with some other activity in that folder.
Furthermore, you can have all the files deleted using a ForEach against the working folder as say in
http://beyondrelational.com/modules/2/blogs/88/posts/10178/ssis-delete-files-from-specified-folder-using-file-system-task-in-sql-server.aspx And there is no need to delete the working folder
itself.
The job is run in SQL Server's Agent
need to be set to run using a domain proxy account as it needs write access to the file system.
Arthur My Blog

Oracle Form designing problem...

Hai experts,
I am facing some problem in the oracle form desiging. we are receiving the dates from the customer and we are capping,washing and
stuffing more than 10 service we are doing.
refno -- primary key
header table
refno cust name mobile no weight status
12345 xxxxxxxxx 1212121 100 kg 0
details table
refno service_type status
12345 capping 0
12345 washing 0
12345 stuffing 0
12345 quality 0
12345 packing 0
same way I have to create rows in the Oracle table.
Check box
. capping
. washing
. stuffing
. packing
( easy way to user can use. check box clicked service required , un checked service is not required.. )
If check box click "capping" 1 row must be create in the detail table
If check box click "washing " 2 row must be create in the detail table
if check box click" stuffing 3rd row must be create in the detail table
If check box click " quality 4 row must be create in the detail table.
My problem is in the check box... how to specified this categories in the detail table ?
if details table status changed, user can Identified capping finished , washing finished, like that..
please help me...
vasanth.

Hai,
we are new to oracle environment sorry,
Thank you very much for your immediate response. Master detail relation ship I created
head.refno=detail.refno
Complete Receiving form details are given below.
Refno - primary key,
Customer name -- connected customer master table...
Mobile phone
Tot weight.
Questions to customer
do you want to capping?
do you want to washing?
do you want to stuffing?
do you want to quality?
do you want to pack with plastic?
Based upon this we have send the dates to capping section, washing section, stuffing section?
Washing people based upon the detail (RNO) they will wash. all services same like.
If washing finished we have to tell the status to customer also.
Every process we have to indicate to the washing line, capping line, stuffing line. Once washed the Rno cannot display.
Final process is packing to indicated Finished.
Designing Questions
Capping, washing stuffing quality is header table or detail table. ? How to specify the all status?
Regards
vasanth.

Oracle Forms LAF Problem

Hi,
I've been working on Oracle Forms & the LAF project for the past 1 week. Im totally new to both of them.
Constantly, im getting problem in implementing CSS to oracle forms using the LAF project.
I downloaded the latest LAF package and followed the steps indicated in the LAF project site. But, when i try to run the oracle form, the CSS is not getting applied to the forms.
The whole window is shown with a white background, and the CSS gets applied only to the Grid Body part. The changes i do in the CSS file gets reflected in the Grid Body part, which means the module reads the CSS files successfully, but CSS is not getting applied to other things.
Even when i try running the sample programs provided in the LAF package its not running properly. The same problem exists. Only the Grid Body part is working.
And also, the fmb file i worked on seems to be working properly on another machine. Is it that im missing any configuration in order to make it work.
I've attached screen shots below. Please check it and help me with a solution.
!http://img403.imageshack.us/img403/4002/laf2.jpg!
!http://img403.imageshack.us/img403/9363/laf1.jpg!

Hello,
As it is clearly indicated on the LAF Project home site, do not ask question about it on this forum. Send your questions to the dedicated mail : [email protected]
Thanks in advance,
Francois

Form execution problem

Similar Messages

Maybe you are looking for