Form "greys out" while running if it loses focus.

Hi,
I am running 10g on OC4J. If my form is displayed and working in the background. E.G calling a procedure and I open anything else when I go back to the form it stays "greyed out" until the process finishes.
Is there some command I can call to rectify this?
Thanks

if you have one process then it's grayed out till the end of the procedure.
if you can split the routine and create (e.g. all 10% of the whole procedure) some synchronize-stops, then you have some seconds the gray background till the next synchronize and after that you see the form.
but we aware: synchronize costs performance. each synch has a roundtrip through your network.

Similar Messages

Picking is greyed out while i create delivery in Consignment Fill Up

Dear SAP Gurus..
Plz, advise,
Picking is greyed out while i create delivery in Consignment Fill Up.
I'm able to create Consignment sales
Scenario:
Comp A --> Comp B --> Customer
but Material should be remain in CompA value vise
Only Inventory of Comp B will be hit.
Thanks
Gaurav

hi,
you need to check in two areas:
OVLP - Item Not relevant for picking in item category.
LT03 or subsequent functions at delivery level - for transfer order.
balajia
Edited by: balaji timmampalli achari on Dec 9, 2010 7:50 AM

FSCT tool gives a Controller time out while Run Client command

Hello,
I am getting a Controller time out error while run client command. I turned on network discovery and start all the services but stil see the time out error;
DNS Client
Functional Discovery Resource Publication
UPnP Device Host
SSDP Discovery
I would appreciate prompt assistance on this.
Thanks,
Praveen

Hi,
Please disable the firewall on my clients, server and turn on "Network discovery" and "File and printer sharing" settings to check the results.
For more detailed information, please refer to the thread below:
SCT tool gives a Controller time out while Run Client command
http://social.technet.microsoft.com/Forums/en-US/a48ae67b-9a9d-4509-9c9c-5d3a468f2cad/fsct-tool-gives-a-controller-time-out-while-run-client-command?forum=fsct
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The number of rows per page is greyed out when running in background?

Hi,
For a customized transaction the number of rows per page cannot be set when running in background.
While a background job is created in SM36 after entering the report name and the selection variant name in the properties of Format the rows and columns field is greyed out.It was not editable.
Is there any settings to be done or in the custom program any code change needs to be done?
Thanks in advance.
Regards,
Sharon.

Hi Gabriel,
After double clicking the format only the rows field is not set to edit.It was greyed out.Is it anything related to the printer settings that will be maintained for a user?
Regards,
Sharon.

PDF password security greyed out while saving a PDF MP Navigator

Hello,
I am unable to set a password for pdf's that I scan with MP Navigator. I have been doing it for years, but now it has greyed out. It is not selectable. I recently upgraded my mobo and did a clean reinstall. The problem occurred before the upgrade and now remains despite full reinstalls of everything. The preferences button provides no way to turn passwords on or off. The Set... button shows password security also greyed out.
Win 7 Home premium 64 bit, 8GB, 250GB SSD root drive, Core i7. MP navigator EX 5.1. Pixma MP 895.
Thanks,
Jim

A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

Hi Gurus,
We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
Issue:
When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
We have tried the following:
1. We updated the HSS_COMPONENT_PROPERTY_VALUE table and updated the PROPERTY_NAME "isCompact" to false.
2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
Thanks in advance.

As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
Hyperion Planning - Version 11.1.2.2.300 and later
Information in this document applies to any platform.
Goal
The scenario:
EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
The administrator went ahead and redeployed the application servers individually into their own JVM.
However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
The aim:
It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
Solution
Caution:
Make sure that you take a backup of the following:
- TheFoundation Services database schema backup
- Take a backup of the following folders:
\Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
Disclaimer:
This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
Use at your own discretion.
Procedure:
1- Run the epmsys_registry to generate the Registry report
2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
i.e:
Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
                run the command:
                 epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                Repeat this command for each ObjectID that has its applicationServerDeployment
                 property set to Configured
4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
Take note of the first ObjectID entry in the section header: for example
WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
- run the command:
                 epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
-Note the Parents ID in the output:
For example:
Parent 1
NAME - WORKSPACE_LWA
ID - e4b3a86a82c26941S32ef81a1455fe48473S7bd0
TYPE - LOGICAL_WEB_APP
Parent 2
NAME - HOST:BACHVMPS3TR
ID - e4b3a86a82c26941S32ef81a1455fe48473S7ffe
TYPE - HOST
- Note the single child ID:
For Example:
Child 1
NAME - WebLogic 10
ID - e4b3a86a82c26941S32ef81a1455fe48473S7fd6
TYPE - APP_SERVER
Now run the following command to remove the Link between Parent and child:
epmsys_registry removelink #parentObjectID #childObjectID
In this example that would translate to:
To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
epmsys_registry deletecomponent #parentObjectID
In this example:
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Delete also the Parent representing the WORKSPACE_LWA
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
Note:So we have now deleted the WEBAPP and LWA for workspace.
6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
7- Start the Weblogic admin console and login
Then go to the left panel and Expand Environment -> Server
Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
Activate Changes and Log off
8- Stop the weblogic admin console server
9- Go to the following location and delete the folder EPMServer0:
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
Delete also EPMServer0 from the following location:
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
Run the following command: sc delete HyS9EPMServer_FOUNDATION1
11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
15- Start the services and test the workspace

Issues with LiveCycle ES4 - "Distribute Form" greyed out and "email button" not functioning

Bought this software on 8/1/13.
Designed my first form, "saved to repository" and proceeded to test. The email function for whatever reason does not work. Went back and examined the properties to the button, I have it set up correctly. In fact the XMS format works perfect, but I want the form to come via PDF when emailed. This feature is not coming through on email.
I am not sure if the above two issues are related however I did read that in the stand-alone software, the "distribute form" is not offerred which I wonder if this the reason it is greyed out.
Can anyone help me work through the "email button" issue?

If the PDF submits to a server-side script URL it can bypass client-side email software.
Try the online PDF submission examples and see if it works for you in Mozilla FireFox:
http://www.pdfemail.net/examples/
You should also make sure the browser is using the Adobe Reader plugin as the default PDF reader.
http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

System Preferences Panes greyed out unless run with sudo

Just installed Java 7 U51 on Mountain Lion 10.8.5
This pane is greyed out & not executable
If I try to run directly:
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/lib/deploy/JavaControlPanel.pref Pane
I get an error (most idiotic in fact):
You can't open "Java" preferences pane because it is not available to you at this time
The "solution" is to open System Preferences as root with
sudo /Applications/System\ Preferences.app/Contents/MacOS/System\ Preferences
But surely that is not what one should need to do to configure preferences?
Seb

As it happened there were MCX policies in place & these System Preferences items were not checked (they were most likely added AFTER preferences were made
Ticking them, made it all behave normal

Co code Segment is greyed out while creating a Business partner

Hi All,
I am trying to Create a Customer thru BP . I have asigned a role and made the necessary setting in " Configure Field attributess as a per BP role. However the Co code segment is coming greyed out .
Can you please advise what needs to be done to open up the same

Hi Samit,
You mean to say that the Company Code Data Section is Greyed out.
From your message i understood that you are trying to create a Customer in XD01.
If that is so give your Company Code in the Company Code Field in the initial screen.
Reward if helpful.
Regards
PAVAN

TRIP END DATE greyed out while creating Travel Request IN SAP ESS Portal

Dear Friends,
                           I am trying to create a Travel Request from my ESS Portal,when I am entering the trip details as follows:
General Trip Data (header)
Start: *    (Have to enter trip date)
End:        (greyed out)   **** problem with this field
First Destination: Country/Region:     open field
Reason for Trip:    open field
Activity:     open field
Estimated Cost:
Previous Step Review     Exit (these are all tabs)
The problem is that the END DATE is greyed out ,how do we enable it,is it a configuration setting or some code change in the function module
PTRA_UTIL_GENERAL_DATA_FIELDS
My portal consultant said that this FM is called in the backround R/3....please let me know ure views on this...
Thanks,
Best Regards,
Karthik

Hi Kartik,
We are getting the same problem. Can you please share how did you solve this. It is urgently required.
Thanks,
Vishal Patel

Burn disc greyed out while exporting videos

Hi All,
I am sorry that I do not knw where to start from.
I have a small issue that whenever I try to export a video from premiere pro cs4 the Start Queue in the Adobe Media Encoder is greyed out.
Please help me in this issue.
Thanks and Regards,
Rahul Dheer

Some suggestions
Mind reader: You are using the trial version.
Let's continue the guessing game for 100+ posts or you can answer the 16 questions at the end of th Wiki article.

HT201272 Some songs are greyed out while others are black. What does this mean and how can I change it? I'm tired of only 2 or 3 songs from an album repeating while the others disappear off the "Up next".

Please help....I hate iTunes to begin with. Especially the latest they have come up with. Layout drives me crazy. And now....I find maybe a couple of songs in an album as "black" and the other titles are greyed out. What does this mean? I find it very frustrating as the black titles will repeat but the others seem to just disappear off the "play next" list. How can I fix this? And no...downloading from iCloud hasn't helped any.

This sounds like you have some unchecked tracks. These are skipped during track to track playback. The track names are slightly greyed out in the album view. You can normally see the check boxes from the Songs view or you can change the status via the rght-click context menu.
tt2

Grey Screen while running a dvd/Sleep Mode

Hello everyone,
I have a Mac pro G5 PowerPC running leopard. I recently just did the apple updates on my computer and ever since then when I have a dvd in my computer after awhile I get the grey screen saying that I need to restart my computer. This has happened about 10 times since I did the update a few days ago. When it reboots I get the message saying that my OS X had stopped responding. I go to send the apple report and take a look at what it is sending and it is something about a kernal. I had a co worker recently say that his computer was doing the same thing with the grey screen when it goes into sleep mode. Is this a known issue at the moment?
When I come home from work and hear my fan running I turn on my monitor and have the grey screen. I thought it was my computer going into sleep mode that was giving me the error however when I rebooted and started my computer a couple hours later. In the middle of watching a dvd I suddenly got the grey screen. The same thing happened while watching a movie last night.
About 2 months ago I bought a new hard drive for my computer and used a program called SuperDuper to make an exact copy of my hard drive onto this new one. I then swapped the new hard drive in my computer. It has been running fine until I just installed the OSX updates.
I don't know if it is coincidence that when I am running a dvd that the grey screen appears since I have done the updates or that doing the OSX update has somehow made my OSX go bonkers.
Also is it possible since I installed the OSX on this new hard drive via this program and not from a disc that is the possible reason when I did updates that my computer's osx freaks out. If so why does it wait about an hour or so of being used to suddenly stop working?....
My other thought could be that my dvd drive is going bad and needs replacing and why would that make my OSX crash?.... if that is the case what dvd drive should I buy and install?
Sorry I don't know much about computers and all this stuff but these are just some of the things I thought might be happening and I just don't know enough about computer to say "yes that is why this would be happening"
Thank you everyone,
I look forward to your responses

Hi bessera;
You are suffering from kernel panics. These are generally caused by a hardware problem, most of the time bad RAM. I would suggest use the install media for you Mac and running Apple Hardware Test using the direction written on the DVD.
Allan

Oracle Forms Service hangs while run time

I have Oracle 10g, I have a from (10g) I compile and generate when I try to run from Forms Builder, I hang in a screen while is said "Oracle Application Server - Forms Service" any iideas what might be wrong of what should I check

This sounds like a configuration issue to me. Have you modified the "default.env" file (found in %ORACLE_HOME%\forms\server) to include the path to your form in the FORMS_PATH variable? Have you installed the Oracle Jinitiator or modified the formsweb.cfg file to use the Sun JRE? If you have installed the Jinitiator or are using the Sun JRE, what version did you install? The formsweb.cfg file defaults to Jinitiator version: 1.3.1.26 and Sun JRE version: 1.4.2_06. If you have a newer version installed you will need to update the version in the formsweb.cfg to match the installed version.
Hope this helps,
Craig...

Forms 10g hangs while running a procedure which has got lot of loops

Hi,
When executing a procedure in Forms 10g which fetches millions of records, application getting stuck.
What parameter is required to be changed in forms configuration?
Can any1 help me out???
Thanks in advance,
Natz.

Particularly this passage:
MaxBlockTime
MaxBlockTime is the time in mili seconds to wait when reading data from the
Runform process.
e.g. a long query, lots of complex processing
(default = 1000 milli sec)
/j2EE/OC4J_BI_Forms/application/forms90app/forms90web/WEB-INF/web.xml
or
/j2EE/OC4J_BI_Forms/application/formsapp/formsweb/WEB-INF/web.xml
Example
=======
<servlet>
<servlet-name>l90servlet</servlet-name>
<servlet-class>oracle.forms.servlet.ListenerServlet</servlet-class>
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>1800000</param-value>
</init-param>
</servlet>
or
<servlet>
<servlet-name>lservlet</servlet-name>
<servlet-class>oracle.forms.servlet.ListenerServlet</servlet-class>
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>1800000</param-value>
</init-param>
</servlet>
What happens?
=============
For long requests (like querying a big table), the Listener
Servlet waits for a default time of 1 second for the Forms
runtime process to complete the request
If the request is not completed then the Listener Servlet sends a busy
response to the client asking the client to retry.
The client sends a retry zero content length request to check if the query is
complete.
This default time of 1 second can be configured using Listener Servlet
parameter called maxBlockTime
Reference
=========
Note 218846.1 How to increase Heap size in OC4J in V2
Francois

Form "greys out" while running if it loses focus.

Similar Messages

Maybe you are looking for