Form guide's preview PDF button not visible in Firefox

Don't know if this is a silly question but when I preview form guides in Firefox then the 4 top-right buttons (including Show/Hide PDF) doesn't appear. I have confirmed that I selected the "Include PDF preview" option. In IE everything works fine, so I'm assuming it has something to do with Active X.
I did have a look at the generated html, but couldn't really get much wiser. Any ideas?

Hi Vijay,
Goto:
Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
Upload this new configuration with HIgh priority.
Reregister the connector and clear the cache.
These steps solved my problem. Probably it should work for you too.
Regards,
Shashank

Similar Messages

  • PayPal button not visible in Firefox, but IS visible in Internet Explorer. WHY??

    Hi!
    I was trying to make an online purchase & the yellow PayPal selection button wasn't visible. I called the company to make sure they accepted PayPal, (they do), & they opened their browser & made a test purchase so they could tell me where the PayPal button was. On their browser the PayPal button was there...on mine it wasn't. I closed out Firefox & restarted it, but the PayPal option button never appeared. I decided to try to make the purchase using IE & the PayPal button was right where the company told me it would be!!! Do I have to change one of my settings somehow?? I avoid IE like the plague...I even deleted the Desktop shortcut for it on my laptop...I had to do a search so I could use it to test this issue. I really don't want to have to use IE for anything!!! Help will be greatly appreciated!!
    Thanks very much :)
    Nuts4Mutts
    "Dogs may not be our whole life but they make our lives whole"
    by Roger Caras

    hello Nuts4Mutts, please try to go through the steps covered in [[Websites look wrong or appear differently than they should]] - they should contain the most common solutions for such an issue...

  • Interview, Contact  etc buttons not visible on Hiring Applicants Form

    Hi,
    Interview, Qualifications, Schools & Colleges, Contact buttons not visible on Hiring Applicants Form.
    Is there any profile option , so that the above mentioned buttons are visible ?
    Thanks,
    Angelica.

    Hi Jhansi,
    Thanks for the reply.
    We tried the mentioned steps, but unable to view the required buttons.
    Can you let me know if there is any profile option for the same, cause we are able to view the button in another instance, but not in the one that we are working on.
    Thanks,
    Angelica.

  • Search in saved preview .pdf files not working any more

    When I download a .pdf file from the internet and open it in preview, the search command works ok. When this same file is saved to disk and opened again, search is not working any more. Is this a bug, or my fault. Regards Rolf

    Hi,
    I hope this helps...
    A while back we have more than one browser running on our PC (IE, Firefox, Chrome) and we messed by how Acrobat views documents over the web.
    I think that this has some relevance here, as around this time LC also started falling over previewing forms.
    Now if we open LC and Acrobat is not running, the "Preview PDF" is not present or accessible. So now we fire up Acrobat before we open a form in LC Designer and the preview tab is there and functioning.
    Not much of a workaround; but I am hoping that someone will have a better one!!!
    Good luck,
    Niall

  • Help button not visible in off-line version

    Why is de help/information button not visible in the off-line version. The web-based version is oké. In use Adobe Accrobat version XI.

    if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

  • Reset button not visible in settings, help?

    Reset button and security button not visible in general settings on my iphone 4 . How do I restore them?

    if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

  • Approve Button not visible in Tasks for Leave request in Tasks- MSS

    Dear gurus,
    Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
    Any suggestions....
    regards,
    Rajasekar.

    hello Bala,
    there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
    Thanks alot Bala..
    In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
    Regards,
    Raj

  • Message mapping (data flow editor, data dependcies  buttons not visible)

    Hi,
    In my SAP PI...IR ...in message mapping screen some buttons are not enable/visible like
    data flow editor, data dependcies,clear mapping  buttons not visible)
    any oss notes/help will be appreciated.
    Thanks

    Hi,
    This will help you
    /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
    Go for 1.4.X version than 1.6.X The Problem will be resolved
    Regards
    Sangeetha

  • Back Button not working in FireFox 4

    Is anyone else having trouble with the back and forward buttons not working in FireFox 4? I installed 4 on an XP desktop and a Vista 64 laptop, and the forward and back buttons don't work on either installation. Does anyone know a fix for this? I tried deleting the "places" files in the profile and that does not help.

    I am having a problem with the back button also in Firefox 4. Firefox forgets the 1st page in any new session or tab. If I open a tab to say bbc.com and navigate to guardian.com I can't click the back button to get back to bbc.com.

  • Adobe PDF Toolbar Not Showing In Firefox

    I installed CS5 Master Collection in Windows 7 64 and Adobe PDF toolbar installed automatically in IE8 but not in Firefox latest version. Would somebody please tell me what to do to install in Firefox?
    Thanks a lot!

    Thank you for all the information. I'll upgrade to Acrobat X.
    Date: Sun, 6 Feb 2011 11:45:21 -0700
    From: [email protected]
    To: [email protected]
    Subject: Adobe PDF Toolbar Not Showing In Firefox
    Adobe Reader if always free. Acrobat requires a purchase.
    Also Acrobat X has different UI, there is usually a floating toolbar that can be used to open the full toolbar.
    >

  • "Display Form" button not visible in UWL preview

    Hi Friends,
    We are implementing Travel module. The standard Workflow WS20000050 has a single level of approval. However, we wanted 2 level approval and so accordingly this was implemened.
    Now we want a 3rd level of decision step to be approved by the traveldesk on recept of tickets.
    Even the pdf form, which contains the travel details, needs to be visible. In the standard task TS20000118, the "Display Form" button is automatically visible in the UWL preview apart from the usual 
    "Approve" and "Reject" buttons.
    However the content that needs to be shown to the traveldesk is different. To achieve this, i copied the standard task TS20000118 and changed only the task description. Rest everything including the parameters and binding remains same.
    But for this task, the "Display Form" button is not visible.
    1. Please advice on the possible reasons why this is happening ?
    2. Is there any setting or any SPRO configuration wherin we need to 
        specify the tasks for whom the button needs to be displayed ?? or
        Is it some portal side configuration ?
    Thanks,
    Shashank

    Hi Vijay,
    Goto:
    Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
    In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
    Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
    Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
    Upload this new configuration with HIgh priority.
    Reregister the connector and clear the cache.
    These steps solved my problem. Probably it should work for you too.
    Regards,
    Shashank

  • Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

    After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

    I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
    Hope this helps.

  • Button not visible in standard sap-toolbar

    Hi All,
    I have added a custom key to standad SAP tollbar using Aceess key in tr-M52N.
    But that custom buttom is still not visible in tool bar. Can anybody guide me?

    Hi,
    It may be that the function is being disabled by authorizations.  To prove this, you could do the following...
    Before you run the transaction you modified, go into debug with /h.
    Run your transaction code - you should start up in debug.
    Use menu option Breakpoints / Breakpoint At / Statement.  Input the command SET PF-STATUS.
    Hit F8 to continue until the SET PF-STATUS command is found.
    At this point, if the SET PF-STATUS statement ends with EXCLUDING tablename (where tablename is an internal table), then double-click on the internal table and display the entries in it.  If your function code is included in this table then that's the reason why you don't see the button.  You'd then need to work back to determine why your function code is included in the internal table.  This assumes the function code does indeed already exist in the GUI status used in the screen.
    Regards,  Andy

  • PDF button not enabled in Print dialog box

    When I am in any application that allows printing and I select File > Print, the Print dialog box opens, but I can't select the PDF button (or the Preview button for that matter). I can see the buttons, but they are not selectable.
    I have a $HOME/Library/PDF Services folder set up properly.
    How can I enable the PDF button for printing?
    (And for the quinella, the Preview button in the same dialog box.)

    I am sorry my post got corrupted as these new Discussions format modifications can muck up when using the ~ (tilde) symbol. !!!!!
    What I wanted you to do was go to the Home folder, then Library, then Preferences and locate two files,
    com.apple.print.custompresets.plist
    com.apple.Preview.plist
    and delete those two files in particular, not your document that you are trying to preview. My mistake for omitting this information.
    So please try this suggestion.
    regards roam

  • Park button not visible in F-63 screen

    Hi,
    I created a role that will alllow a user to park the document using F-63. In DEV it's working fine however when I transported it to PRD. The Park Document button (SAVE) is not visible or deactivated in F-63 screen in PRD.
    Any help is much appreciated? Thanks.
    Regards,
    Threadstone

    Hi Threadstone,
    The GUI-Status ZBVV has got the save-Button PBBP, but the display of it can be excluded.
    You can see what happens, when you set a break-point in function Group F040 (Transaction SE80, Function group, F040, PBO-Module, Status_setzen_zbv, click left of line-number of the line “if yfuncl eq ’P’.”):
    module status_setzen_zbv output.
      tables: with_item.
    *------- Standard-Status -----------------------------------------------
      if yfuncl eq 'P'.
        status = 'ZBB'.
      elseif yfuncl eq char_r.
        status = 'ZBF'.
      else.
        status = 'ZBV'.
        if rfopt2-xcmpl eq char_x.
          status+3(1) = char_v.
        endif.
      endif.
    *------- STATUS setzen -------------------------------------------------
      perform status_setzen.
    endmodule.   
    Another Break-point might be set in subroutine “extab_fuellen” where functions are appended which shall not be used.
    form exctab_fuellen.
      refresh exctab.
      if bseg-koart ne char_k and
         bseg-koart ne char_d                                   "/N394306
      or ( bseg-koart = char_k and lfa1-xzemp is initial )      "/N394306
      or ( bseg-koart = char_d and kna1-xzemp is initial ).     "/N394306
        exctab-okcod = 'ZEMP'.
        append exctab.
      endif.
      if yfuncl eq char_d or
         yfuncl eq char_r.
        exctab-okcod = 'BP'.
        append exctab.
        exctab-okcod = 'PBBP'.
        append exctab.
    Yfuncl has got value D (display) or R (release). It can be, that the user has not got the authority for saving. Please check SU53 or via ST01.
    Regards Wolfrad

Maybe you are looking for