Form issue after IAS upgrade 9.0.2 - 9.0.4

Hi
I have recently performed an upgrade from IAS 9.0.2 to 9.0.4. One of the forms we were running under 9.0.2 is now exhibiting some strange behaviour under 9.0.4 in that it requires a screen refresh (either via pressing f5 or pressing the browser refresh button) before displaying the inital screen correctly.
In order to rule out any upgrade compatibility issues we took the 9i fmb file, converted it to a 9.0.4 fmt using 9.0.4 Forms Builder, re-converted back to fmb and then compiled into a new fmx file.
Any pointers as to why we are seeing the above behaviour?
Cheers
James

I need some more info to begin to analyze this:
--What exact version of Forms?
--What browser and what version of that?
--What version of Jinit or Sun's plug-in?
--No other form displays this problem? Just one of many?
--What is the NLS_LANG setting?
--What is shown before the refresh? Nothing? Part of the form?
--What is on the first canvas of the form? Is that a stacked canvas? Are others showing under it? Any java beans in the form?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Similar Messages

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Permissions issue after Mavericks upgrade

    I have just updated an early 2008 IMac with OSX Mavericks.
    All software running fine, but I noticed occassionally I was getting an authentication prompt on some files, didn't follow, but simply authenticated as and when I need to, I assumed it was when I moved files from my Mac Pro to my Imac.
    Having run the upgrade however, I get an error message to contact the vendor (Battlefront) as my copy of Combat Mission Battle for Normandy has lost its license.
    After the upgrade I had also purchased from the same vendor Combat Mission Fortress Italy. Having downloaded this and gone to run after copying to applications, this software gives me an error message saying unknown developer so I have got no where near installing a license.
    Having contacted the vendor and tried to get a work around, I am now getting the message it is you Mac not our software, despite the fact that all my other software is working fine (and the fact that the Combat Mission Battle for Normandy game worked fine until the upgrade).
    I do feel some sympathy for them, I do think the Mac has some sort of permission issue - I also probably compounded this by deleting a user which I did not recognise called 'wheel' which I suspect now is some form of default permisison.
    Anyone got any ideas, how do I 'reset' the system - I have tried fixing the permissions through disk utility.
    My vendor got me to run a sudo command through Terminal, but I got the message...
    sudo: unable to stat /etc/sudoers: Permission denied
    sudo: no valid sudoers sources found, quitting

    Update Saturday Jan 4, 2014
    Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
    I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

  • IPhone syncing issues after iTunes upgrade

    Hi
    I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
    I tried authorizing the computer but I just get "This computer is already authorized".
    there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
    I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
    Would re-installing iTunes help?
    Any ideas?
    Thanks
    Chris

    Hi Chris,
    Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
    If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
    If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
    -Jason

  • Issue after solman Upgrade

    Dears,
    We were using solman 7.0, connected to ECC 5.0 server.
    We configured all activities EWA,System Monitoring and all were working fine.
    Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
    1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
         We performed Read data from remote system also but still same issue.
    2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
    Please suggest.
    Shivam

    Hello Shivam
    For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
    It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
    Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
    Hope this information is helpful.
    Regards,,
    Paul

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

    Hi,
    We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. After the upgrade, he now encounters problems while roaming with the phones. The phones were tested with FW 1.4.1, 1.4.2 and 1.4.3.
    Configuration is set according to wireless voice design guides (VoWLAN DG 4.1, 7921 Deployment Guide). A Cisco TAC is also in progress, but they seem to be uncertain whether it is a wireless or CUCM issue, but I don't see a reason why it should be the CUCM when the only thing changed is the WLC Software Version.
    Is there anybody who is aware of such issues and can offer help?
    Thank you in advance.
    Best regards,
    Patrick

    Hi,
    we had a TAC ticket open with this customer and after some time, the TAC gave us the advise to use this release and the problems are now solved.
    So for others having the same issue: If you only need to support the 2600 APs, stay with the latest 7.2 release as there are some issues with the 7.3 and 7.4 release. If the customer requires HA, AVC or any of the new features + wireless voice, be very careful as it seems that the newer releases are having problems with that. I hope that Cisco will fix this very soon.
    regards,
    Patrick

  • Web dynpro ABAP- small issue after EHC1 upgrade

    Hi All,
    We have a Web dynpro ABAP report and it was working fine before the EHC1 upgrade. After the upgrade we noticed that the row count in ALV greed was disappeared.
    The report used to show 25 records per page and we were able to jump to the other pages by clicking on row count that was placed right below the report. Now report shows all the records and we only have scroll down option.
    Any idea where to look/ how to fix this issue?
    Regards,
    Mike

    In addition to applying that note, you also must deactivate Lightspeed rendering.  To me that's too extreme of a thing to do just to get paginators.  You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

  • Performance issue after PT Upgrade.

    Hakan and Team ,
    We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
    After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
    can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
    Deatils :-
    SQL SERVER 2005
    Windows 2008 R2

    Hi,
    Performance is always a difficult one to tackle.
    It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
    At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
    http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
    See if you can apply some of the keypoints from his presentation.
    Regards,
    Hakan

  • Authroization issue after the Upgrade for Multiprovider

    Hello Experts,
    After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
    The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
    In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
    This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
    Can anyone give me any idea as to how to solve this issue?
    Many thanks in Advance..
    Thanks
    Raman..

    Hi,
    Look at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
    Hope it helps

  • Portal Issue After SP Upgrade

    Hi All,
    We are facing issue in portal after SP upgrade.
    Back, Forward and History button are appearing at right side bottom.
    Did any one faced similar issue?
    Any solution?
    Regards,
    Jackie.

    Problem in my portal is
    History, Back and Forward options are appearing at the bottom of portal Page.
    In Dev System, it is looking good (Appearing @ top).
    In Quality and Production, it is appearing @ bottom.
    Regards,
    Jackie.

  • Issue after iOS4 upgrade

    iPhoto no longer recognizes/displays photos on my iPhone that have been saved via mms, email or 3rd party app (i.e. colorsplash) after recent upgrade to iOS4. It does show a photo placeholder and will ultimately import the photo but it will not display the photo. Displaying photos taken with the phone itself does not seem to be an issue.

    Same issue, but it seems to get worse over time. At first it was just the 3rd party camera apps that iPhoto only displayed dotted white outline. And as you said, if you highlight it, iPhoto imports the picture.
    But, it seems to get worse for me. After awhile, even the native camera app gets the same treatment and when you try to import the outlines, you get an error, where iPhoto says the picture format is invalid.
    If you delete the cache --user-->library-->cache-->com.apple.iphoto, it seems to reset things for awhile, allowing you to import the dotted outlines once again.

  • Really big issue after last upgrade

    After invoking
    pacman -Syu
    this morning something really strange happened : it upgraded my kernel headers and docs to kernel 2.6.35.7, but did nothing to the kernel itself. After the install of all packages, I went to the '/boot' directory and it was empty except for the 'grub' sub-directory. Since the kernel was still loaded in memory, it was only a matter of doing
    pacman -S kernel26
    and it installed the kernel and initramfs image.  All this happened while I rebooted in console mode to uninstall gtk/gnome completely and install kde.
      After that I went to check my system configuration file 'rc.conf' and guess what, it was missing too and after that I noticed that 'inittab' had also been deleted. Luckly I edited both files with vim which made backups in 'rc.conf~' and 'inittab~' respectively, so it was easy to restore both. After having a quick look at etc I decided to reboot the system(default runlevel was changed back to 5 so I could boot kde directly) but something was strange after reboot(I expected that) : nouveau framebuffer driver did not load and I never entered KDM, getting a terminal login instead. Also noticed that the PS1 variable was not set. After trying to edit my configuration files I kept getting that this was a read only file system and could do nothing until I booted with an old ubuntu livecd. After checking on 'inittab' again I noticed the following files were missing(sadly, I never edited them):
    - /etc/rc.sysinit
    - /etc/rc.single
    - /etc/rc.multi
    - /etc/rc.shutdown
      Has anyone experienced this 'accident' before? If so, do you have any clue how I might recover those files? I would rather not reinstall the system.
      Thanks in advance.

    jonathan183 wrote:
    thiago wrote:
    After checking on 'inittab' again I noticed the following files were missing(sadly, I never edited them):
    - /etc/rc.sysinit
    - /etc/rc.single
    - /etc/rc.multi
    - /etc/rc.shutdown
      Has anyone experienced this 'accident' before? If so, do you have any clue how I might recover those files? I would rather not reinstall the system
    pacman -Qo /etc/rc.sysinit reports owned by package initscripts ... which you could re-install ... might be worth reviewing logs and see if you can figure out whats going on first though ...
      Thanks, after manually installing the 'initscripts' package in '/var/cache/pacman/pkg', my system was restored. As for what happened, I believe it was some bug with pacman, as the 'initscripts' package was uninstalled after the system upgrade. That package was part of the 'base' meta package which was upgraded as a whole. After the restore I issued :
    pacman -Sf initscripts
    to have the package 'officially installed'.
      As I stated, 'initscripts' was not the only package uninstalled after the system upgrade, kernel26 was lost too(but kernel26-docs and kernel26-headers were upgraded successfully). After the restore I tried to start kde with 'startx' and got a message stating that '/usr/bin/X' could not be found/executed. That was solved by reinstalling the 'xorg' meta package, but I believe some package of the 'xorg' group was also uninstalled after the upgrade.

  • E71 wlan issue after firware upgrade

    I just upgraded by E71 to the latest software version. The upgrade went without any issues. After the upgrade I realised that t had removed all my contacts - so I had to restore my backup(I restored the SETTINGS as well). I was using a app for my 'WiFi' (for prioritizing my access points) and after the firmware upgrade - I could not see this app at all. The following are my issues now:
    1. I cannot connect to my home wifi(WEP) - it was fine before the upgrade. The first time it says - 'Connection not available' and every subsequent time it irritates by showing 'WLAN already active. Please close the connection and retry'.
    2. I have tried to restore the factory settings and it still does not work.
    3. I have renamed my Access point to the ones that the app was using - still no luck.
    So, what are my options now? Can somebody please help? I never thought a small software upgrade could spoil my whole evening!

    Hello,
    I have just had EXACTLY the same problem.
    I have a Nokia E71 and it was working OK before the upgrade. I just used the latest Nokia Updater and latest nokia pc suite to upgrade to 500.21.009.
    The upgrade performed perfectly, and after the upgrade I restored my backed up data.
    I have the exact symtpoms as psankar. I have factory reset the phone and tried again. Same problem.
    Connection not available, and then connection already active. Small Wireless icon appears at top right of screen, and stays there, but there is no active connection in connection manager.
    The only way to remove the wifi icon and to get the phone to attempt to reconnect is to power off the phone, but then on reconnectig then you get connection not available and then the whole cycle begins again.
    Help appreciated
    TIA
    Alex

Maybe you are looking for