Form Mode Change

Dear everyone,
  I followed the SDK sample code "SystemFormManipulation" and add a tab in sale order form.  I found that the form mode will change when the newly added tab is clicked.  Why this happen??  How could i solve it??
  Thanks!!
Regards,
Kit

Hi Kit,
Try this in the tabs items:
oItem.AffectsFormMode = False
What is happening is that when you select a tab, you're changing the datasource (user or db), so that the form mode is affected. This way you will solve it.
Hope this helps,
Ian

Similar Messages

  • How to control item between Form mode change

    Hi Experts
    I am using B1DE to do something like some item's enable status will be changed following the Form mode change.
    For instance, add a new matrix into system form, if changing the Form mode to Find, I want to disable this matrix, if changing to Add mode, the matrix should be enable.
    Do you how how to do this?
    Thanks
    Tim

    Hi,
    You need to capture Menu Event in your code and can make matrix either editable or non editable.
    Sub MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
            Try
                Dim oForm As SAPbouiCOM.Form = objMain.objApplication.Forms.ActiveForm
                If pVal.BeforeAction = False Then
                    If pVal.MenuUID = "1281" Then                // For Find Mode
                        //make matrix editable or non editable
                    End If
                End If
            Catch ex As Exception
                objMain.objApplication.StatusBar.SetText(ex.Message)
            End Try
        End Sub
    regards:
    Sandy

  • Form mode changes in update mode while clicking on folders

    On user defined form
    While navigate last record form mode is "Ok"
    when i click on further folders form mode going to change in update mode
    How to resolve this problm?

    Hello,
    I experienced this yesterday as I was creating new form with ScreenPainter.
    I solved it by directly editing the resulting srf file (xml syntax).
    The folders can easily be identified from their type (type="99") and I changed the AffectsFormMode attribute from 1 to 0 in both the "item" element and the included "specific".
    Regards,
    Eric

  • Form Mode Change Event

    Hi,
    Is there any way to capture form's mode change? (eg: from OK to UPDATE...)
    Thanks

    As far as I've tested (I'm developing it by now) you must coordinate some pieces:
    1) First, your form must set AutoManaged="1" attribute
    2) Second, every item which you decide changes your form status must set AffectsFormMode="1"  attribute (for example, set to "1" for edittext, but "0" to folders because if you click a folder item it doesn't affect your data)
    3) capture the itemevent and menuevent of this form, and check then form's mode property
    I hope it helps, greetings
    Jose Manuel

  • Detect form mode change?

    can anybody please tell if and how is possible to detect (i.e., an event is generated only for this) when user changed form mode ? meaning something like not having to check pVal.FormMode in another event.. just if there a special way to detect that? because I want to do some custom actions when this happens. thanks in advance.

    try it in menu event - Find is 1281, new is 1282. For the rest form modes you should check it in item event - maybe is easier solution.

  • How can we track the entire event in which the form mode gets changed?

    If the form is in OK Mode and if the user edits any field(Including UDF Window Fields). form mode changes to Update...So at that time, how can we track the entire event in which the form mode gets changed?
    Thanks
    Hari

    Dear hari angamaly,
    You could get the form mode by FormMode Property in ItemEvent Object in UI API.
    Best Regards
    Jane Jing
    SAP Business One Forums team

  • WF_EXTSRV: use PDF Form in Change mode in Portal:

    Hai,
    I'am trying to use transaction WF_EXTSRV to generate a task which can be used within the UWL from the portal. The main purpose of this task is to show an exsisting PDF form in change mode. I allready found some nice information from SDN, but not enough to make it all work. I still have still these questions:
    1) How must I setup the required fields within transaction WF_EXTSRV when I want to generate for example this url:
    http://abc.abc.nl:51800/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrForm?SCENARIO=SPEG&MODE=CHANGE&NOTIF_NO=000600000003
    2) How must a then setup transaction SWFVISU? Which apllication and package name.
    I hope some can help me.
    Greetings,
    Remco

    Hi,
    When do you get this error ... "No scenario specified". ???
    I mean did you try creating an iview for IsrForm Java WD application sending the Scenario name as parameter?
    Betn us,
    Why dont you try the parameter IFV='P' for IsrFormApprove Java WD application itself. Get to know more about this parameter in these threads...
    Re: Buttons for ISR_APPROVE & ISR_PROCESS appearing in Workflow
    https://forums.sdn.sap.com/click.jspa?searchID=165819&messageID=1268222
    Regards,
    <i><b>Raja Sekhar</b></i>

  • Change form Mode as Add for master data while Loading

    Hi,All
    I have a master data form(user form). By default it will load and shows Find mode but i dont want find mode i want add mode after loading
    plz suggest me a good idea..
    By
    Firos.C

    Hi,
    After the form is loaded in the load event, change the form mode.
    objForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE
    Or
    objSBOAPI.SBO_Appln.ActivateMenuItem("1282")
    Hope it helps,
    Vasu Natari.

  • XML Forms: save form in "Show Form" Mode

    Hi All,
    Is there a way to have 2 edit screens in XML Forms?
    My scenario:
    1) user creates form
    2) admin reads form and changes the property "status"  to "form read" (a field that the user does not see) and saves.
    Is this possible?
    I can add the controls for the "status" input and save button. 
    But when in Display mode I click on the save button and it errors.
    Cheers,
    Vic
    Message was edited by: Victor Yeoh

    In the URL Generator Service, XML forms CSS file path changed. I've reset the XML forms CSS file path to /irj/go/km//etc/xmlforms.
    This resolved our issue.

  • DbDataSources and Form modes

    Hi, I have a little problem, i was reading in the forum, but nobody has the same problem, so, i have a form, with 2 dbdatasources, one to OITM, and the other to OITW, in the form load i use the query method over the oitm dbdatasource and oitw dbdatasource and works fine, but by default the form opens in Find Mode and it's fine, when I change to Add Mode, all the dbdatasources disappers, and the update method doesn't work, does anybody has the solution of that?
    i change the form mode to open in Add Mode but when I change to Find mode and the form works in the same way, dropping all the dbdatasources.
    Message was edited by: Rodmmy Ortiz

    Hey Rodmmy,
    By default Business one resets the dbdatasources when changing to add mode as it assumes a new record is being added.
    can you change the forms mode to add or OK mode first instead of find? and then populate the dbdatasource

  • Form Mode problem

    In my user defined form, i start the form in FIND mode. After i entered values into the edittext and change the form mode to OK mode via SDK, the edittext value is all refresh to empty
    WHy is this happening? Is this normal? Is there any solution to this?
    Thanks

    seems to be normal..I don't know..
    First try to add a TextBox to your Form and before you change it to "Ok" Mode, set the Textbox's Text with your Edittext..
    or declare a global string variable and before changing the Form Mode, give your value to this string
    have a try..
    greetz
    Matthias

  • Form Mode validation

    Hi ,
    created Add-on Form using screen painter. in form update mode i want to make my document no fleld(user defined) to be non-editable(enabled=fasle) like normal SAP screens.i used the following code for that.
    Select Case pVal.FormUID
             case "FormId"
                    Select Case pVal.Before_Action
                             case "true"
    If pVal.FormMode = "2" Then
       OForm = sbo_application.Forms.Item("Frmuid")
                   OForm.Items.Item("Doc_No").Enabled = False
    End If
                      End Select
    End Select
    its working fine. but the event will trigger again and again until change in form mode.
    i want to eliminate execution of statement once the docnumber field is set to Enabled = False in update mode.where i can add my code exactly?
    regards,
    Ganesh kl

    hi
    in the screen painter it self use editable=false for item which u want.
    in the menu event for add menuUID and while form loading make item editable=true
    and for the menus find,first record,last record,next record,previous record use editable=false
    1.while opening the form if u r opening in add mode then make item editable=true
    2. If (pVal.MenuUID = "1282") And (pVal.BeforeAction = False) Then   'Add mode
    'make item editable=true
    endif
    3. If (pVal.MenuUID = "1281") And (pVal.BeforeAction = False) Then   'Find mode
    'make item editable=false
    endif
    4.If ((pVal.MenuUID = "1288") Or (pVal.MenuUID = "1289") Or (pVal.MenuUID = "1290") Or (pVal.MenuUID = "1291")) And (pVal.BeforeAction = False) Then   'navigation mode
    'make item editable=false
    endif
    hope this helps u
    regards,
    varma

  • Form Mode Update

    Hi.
    I have the following problem:
    My button is id 1.
    If my form mode is Update and I do click on my button. this change to Ok.
    I have a event that when a field is nothing this show a message and I need that it is on update mode.
    Thank for your help
    Regards,
    Jose

    Dear Jose Villarreal 
    You could implement the function as following code:
    Private Sub SBO_Application_ItemEvent
    Case et_ITEM_PRESSED:
             If pVal.ItemUID = "1" Then
                        Set oEdit = oForm.Items.Item("test").Specific()
                        If oEdit.String = "" Then
                               oForm.Mode = fm_UPDATE_MODE
                        End If
                    End If
    End Sub
    Best Regards
    Jane Jing
    SAP Business One Forums team

  • Gnu readline with vi mode change visualization

    After a lot of searching how to get some kind of vi mode indicator working with GNU readline I've decided to hack readline myself. It's working fine for me and because I'm happy archlinux user I've decided to share my findings here, so maybe somebody will find it useful too.
    there is a patch to readline needed - I've created AUR package readline-vi-mode-changed-hook
    additional logic / configuration to provide your visualization
    To not double post what I've already wrote in more detailed way, here is the link to my personal blog where I've documented the whole thing.
    There are however few things still bugging me and maybe somebody will be able to help me with that. The particular thing which I would like to solve is to get escape sequence for changing cursor color working inside screen and tmux. I've found trick for screen but what is expectable is that when switching windows the cursor color is not reset by screen to last color set in particular window. Because cursor color sequence is not really a standard nor part of termcap / terminfo I feel it will not be so easy / possible ?
    Last edited by mirci (2010-10-11 19:26:06)

    Sara wrote:Am using this with GNU screen, and it works great (no change in cursor color, of course, but I think I actually prefer that, as it isn't inconvenient to look at the window title in DWM). Thanks for sharing the patch--I don't know how I ever lived without it
    Well I started with the window title as I use Xmonad, then I realized that looking up or down on screen isn't very convenient for me (mainly because of a big screen I have) but it's still fine, so I was thinking about visualization which would be closest to the prompt location, cursor color was natural choice however it is not very reliable in terminal multiplexers and in general. The latest and my favorite now is the change of prompt itself (eg. bold version).
    Anyway thanks for feedback, firstly when published this I thought nobody is using VI mode with readline judging based on almost no feedback at all. It's cool that at least somebody found this patch useful .
    lavandero wrote:
    Would you be interested in porting this to NetBSD editline (libedit)?
    Open/FreeBSD also use it, just in case that qualifies as incentive.
    I don't use any application which uses editline. I know it just in the meaning that it is implementing similar functionality as readline do. I guess then some applications usually can be compiled with readline or editline (if author thinks it can be useful based on different licenses and so on) ... does the *BSD systems do it that way ? Anyway I have editline in my mind if I would maybe implement some application where I would need readline functionality. Readline is fine but to be honest I found the source code of it not very nice. So to your question ... as I'm not user of the editline so far I am not planing to port this patch there anytime soon.
    Just out of my curiosity which let's say well known applications can be compiled against readline and editline, is it out of box provided by upstream or usually patches are done for it. How it works in *BSD then ? In my archlinux box I frequently use mainly 2 readline applications (bash, i/python).

  • Logs for 'Operating mode' change in mirroring

    Logs for 'Operating mode' change in mirroring
    Hi Everyone,
    Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
    Regards,
    Aspet
    A.G

    Try looking into trace log files
    DECLARE @filename VARCHAR(100), @filenum int
    SELECT @filename = CAST(value AS VARCHAR(100))
    FROM fn_trace_getinfo(DEFAULT)
    WHERE property = 2
      AND traceid = 1
      AND value IS NOT NULL
    SELECT @filename
    SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
    SELECT @filename
    SELECT gt.EventClass, 
           te.Name AS EventName,  
           gt.TEXTData, 
           gt.NTUserName, 
           gt.NTDomainName, 
           gt.HostName, 
           gt.ApplicationName, 
           gt.LoginName, 
           gt.SPID, 
           gt.StartTime, 
           gt.EndTime, 
           gt.ObjectName, 
           gt.DatabaseName, 
           gt.FileName 
    FROM [fn_trace_gettable](@fileName, DEFAULT) gt 
    JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id 
    WHERE EventClass = 116 
      AND TEXTData LIKE '%Alter
    database%' 
    ORDER BY StartTime; 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Blog:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance

Maybe you are looking for