Form on table in remote db, fails when creating
Creating a form based on a table or view is failing in portal (version 9.0.2.2.14A). Here's the details....
1. Created public db link "remotedb"
2. CreateD public synonym to table "mytable for mytable@remotedb"
3. Use create form wizard in portal, entering my synonym as the table to base the form on, just using defaults for now. After clicking on "Finished", I get ora-00980 errors on several lines when it tries to create the package body. The lines coincide with my remote table synonym.
Has anyone else ran across this? I did not get any hits on Metalink, just thought I'd try here before opening a tar.
Thanks.
Hi,
The oracle error you are getting means that
ORA-00980 synonym translation is no longer valid
Cause: The synonym used is based on a table, view, or synonym that no longer exists.
Action: Replace the synonym with the name of the object it references or re-create the synonym so that it refers to a valid table, view, or synonym.
Please do as suggested in the action.
Thanks,
Sharmila
Similar Messages
-
Install OBIEE Failed When Creating Domain
Hi all,
I tried to install OBIEE on 64bit redhat linux, but failed when creating domain, the error log shows:
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An internal WLST operation has failed.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3126)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
the following steps(steps after creating domain) raised:
Caused by: java.net.ConnectException: t3://hostname:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination
It's unlikely a hosts file issue which I've met before.
Install OBIEE Failed on Linux 64bit
the log caused by hosts file shows:
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
BTW, the port was tested to be available.
any idea?
thanks in advance
Nathanielwe had this issue couple of days back ,,
Resolved by doing below
1. uninstall obiee 2. drop the repository 3, remount /tmp folder
with this we could successfully install obiee 11.1.1.7 -
Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark KamoskiDear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski -
Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'
Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanksHi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes -
Permission denied remote socket ERROR when creating outgoing PROVIDER
Hi,
I am having issues in the outgoing provider.
My Stellent 7.5 is installed on a linux box with ip address 182.30.190.28 and hostname of pc-prd-st and the URL to access this is http://pc-prd-st/stellent_pr/
I have installed two instances of Content Server 10gR3 on a different linux box with ip address 182.30.190.38 and hostname of poc-dev-prd-cs. There are 2 instances of Content Server 10gR3 running on this box. One is for dev and one is for prod. Here are the URL's to access both
http://poc-dev-prd-cs/dev_idc/
http://poc-dev-prd-cs/prod_idc/
dev_idc admin port=5440 and contentserver port=5444
prod_idc admin port=4440 and contentserver port=4444
Now on my Stellent 7.5 version that is running on 182.30.190.28 I created an outgoing provider to connect to http://poc-dev-prd-cs/prod_idc/ which is my prod instance of 10gR3 and here are the values I have when creating a provider:
Provider Name: ucm10gProdProvider
Provider Description: Provider for connecting to poc-dev-prd-cs PROD Instance
Provider Type: outgoing
Provider Class: intradoc.provider.SocketOutgoingProvider
Provider Connection: intradoc.provider.SocketOutgoingConnection
Instance Name: prod_idc
Server Host Name: poc-dev-prd-cs
Server Port: 4444
Relative Web Root: /prod_idc/
But when I test this provider it's giving the following error:
Connection State: down
Connection Error: Unable to establish connection to the server. Permission denied. Address '182.30.190.28' is not an allowable remote socket address.
The provider 'ucm10gProdProvider' is in error. Unable to establish connection to the server. Permission denied. Address '182.30.190.28' is not an allowable remote socket address. [ Details ]
An error has occurred. The stack trace below shows more information.
!csProviderError,rtpstell01Provider!$Unable to establish connection to the server. Permission denied. Address '182.30.190.28' is not an allowable remote socket address.
intradoc.common.ServiceException: Unable to establish connection to the server. Permission denied. Address '182.30.190.28' is not an allowable remote socket address.
at intradoc.server.proxy.ProviderStateUtils.checkReturnData(Unknown Source)
at intradoc.server.proxy.ProviderStateUtils.testConnection(Unknown Source)
at intradoc.server.ProviderManagerService.testProvider(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at intradoc.server.Service.doCodeEx(Service.java:617)
at intradoc.server.Service.doCode(Service.java:583)
at intradoc.server.Service.doAction(Service.java:507)
at intradoc.server.Service.doActions(Service.java:411)
at intradoc.server.Service.doRequest(Service.java:1765)
at intradoc.server.ServiceManager.processCommand(Unknown Source)
at intradoc.server.IdcServerThread.run(Unknown Source)The error above points to the IP Address of Stellent 7.5 and saying Permission denied. Address '182.30.190.28' is not an allowable remote socket address.
As I have verified all the instances are up and running. I restarted both the servers several times but still the same error. As I also have one more out going provider that connects to the test instance which is on different box and it works for that. But some how not for my the new prod_idc. Any ideas what might be wrong.
ThanksHi
Add the config entry SocketHostAddressSecurityFilter to config.cfg with the IP addresses that you want to let access the CS . It should be like this :
SocketHostAddressSecurityFilter=127.0.0.1|10.177.*.*|10.229.175.167
After this restart the CS and test it out.
Srinath -
Bug in Tabular form Not Exist Validation, fails when creating multiple rows
Hi,
I have a Not Exist validation created for a Tabular form:
select 1 from my_table where col1 = :col1 and col2 = :col2Execution State: For created and Modified Rows
which is working fine when a row already there in DB
and I am trying to enter a new row with same data.
but when there's no data and I enter two rows with same data, validation does not fire, first row should allowed to enter
but for second row it should give error that data already exists, which is not happening.
for example,
let's say I have a row in DB with: 1, 2, 3
when I try to add a new row with same data ie. 1, 2, 3 validation fires and showing error, which is fine.
but let's say there's no data in DB and I am entering two rows with:
1, 2, 3
1, 2, 3
validation is not working this time, it is allowing to enter both the rows.
do I need to create a manual validation for this or what?
Apex 4.1.1.00.23
Regards,
Tauceef
Edited by: Tauceef on Dec 6, 2012 10:09 AM
Edited by: Tauceef on Dec 6, 2012 11:22 AM
Edited by: Tauceef on Dec 6, 2012 11:27 AMHello Tauceef,
>> Now I got it, I was under impression that it will validate one by one row before insertion,
>> but it's going to check all the rows first, then do the insertion.
Just to clear things up, the APEX engine works exactly as you describe, but this is your problem.
The APEX engine do check\validate all the rows first, one row at a time, and only if all the rows pass validation, the DML processes kick in. The DML processes work on the entire Tabular Form record set (per page view, of course).
In order for your type of validation to work (the one that queries the database), as you want it, the validation and DML actions have to run together, row by row. This is not how things work, because it’s less efficient/optimal, and may lead to a situation where a certain row can fail validation, but other row(s) already been inserted/updated/deleted into/from the database. This could be a very tricky situation.
Vikram has suggested to rely on a database constraint, and control the APEX error message. This is possible, although I’m not sure that in this case, the Tabular Form will retain all the user changes, in case of validation error. You should check it.
Another option, which Marc hinted on, is to manipulate the G_Fxx arrays. In your case, you should loop through the new rows, compute their MD5, and make sure that all the rows have different MD5 values. This is on top of the current validation, which makes sure that the new rows do not already exist in the database.
Regards,
Arie.
♦ Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
♦ Author of Oracle Application Express 3.2 – The Essentials and More -
Update 2 tables in 1 mapping fails when using DB link
Hi,
We use OWB10 R2. We have a mapping which should update 2 target tables. 1 table is part of the target schema of the mapping, the other table is located on a different database and is updated through a database link.
What we encounter is that only 1 of the 2 targets is updated.
When removing 1 of the targets in the mapping (does not matter which one) then the target left in the mapping is updated normally.
Is there a problem or restriction on using target tables in a mapping? Should they always be located in the same database? Or is there somethingelse we are overlooking?
Any help is very appreciated.
Regards,
IlonaHi Ilone
When we had a conf call with Oracle regarding one of the issues - they told us that with Oracle 10g R2 it is recommened configuration to have target in the same machine/database as the runtime repository. Apparetnly they haven't tested the situation when the target is on different machine. I was told that it makes more sense to keep runtime and target together as it will reduce network traffic and increase performance coz no data will have to be moved across the network (and aviod using pesky dblinks!). Apparently this recommendation is stated somewhere in thier installation guide. Because it is not supported and tested configuration - they don't know the impact it might have and how it is going to behaive. Some sql might be generated wrongly or the situation you are in...
So we had to change our configuration and now have runtime repository sitting on the target machine and i have maps that load more then one table - no problems at all!
Could you possibly try creating simple map and doing load to two tables on the same db? if this works - then y ou will know the answer.
Hope it helps and would be interesting to know how you get on.
Vix -
When you attempt to deploy a windows 10 C++ Universal app that has a reference to a Windows Runtime component, to a Remote Machine (windows 10 machine), you will get an error message instead of successful deployment.
Right click solution, Go to Properties -> Configuration Properties -> Configuration - Uncheck "Deploy" checkbox for the Windows Runtime Component project. Then retry deployment to remote machine.
-
War file created in Eclipse works, but fails when created by Ant
Hi,
I am having trouble getting my flex war file to work when I create it using Ant, even though the same war works fine when I create it from my Eclipse Export War function. This is a critical problem and any ideas or suggestions would be greatly appreciated.
I have a working installation of LCDS running under JBoss 4.0.5 (in a CENTOS (Red Hat) environment). I have implemented a datatier in Java to interact with my PostgreSQL 8.x database. The Java code, plus the necessary flex jars and xml files and some mxml test programs, are all in an Eclipse J2EE project that I created from the flex samples.war file. It all works fine when I use Eclipse to create a WAR from the project and deploy it in JBoss. My problem is this: When I create a WAR piece by piece using Ant, then deploy it to JBoss, that WAR does not work. The error I get is this:
javax.servlet.ServletException: Invalid Configuration: see previous failures. flex.webtier.util.ServiceUtil.setupFlexService(ServiceUtil.java:55) flex.webtier.server.j2ee.MxmlServlet.init(MxmlServlet.java:57), etc.
When I look at the log I see this problem:
"You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.",
but that error is in the server log even when I use the good WAR file.
I have compared the two wars but cannot find any substantial difference between them.
Thanks in advance!Have you tried enabling debug level logging and removing the category filters in services-config.xml? It should show all the destinations being created, and if any are failing. To get the maximum level of log detail, something like this should work:
><logging>
>
> <target class="flex.messaging.log.ConsoleTarget" level="Debug">
>
> <properties>
>
> <prefix>[Flex] </prefix>
>
> <includeDate>false</includeDate>
>
> <includeTime>false</includeTime>
>
> <includeLevel>false</includeLevel>
>
> <includeCategory>false</includeCategory>
>
> </properties>
>
> </target>
>
> </logging>
Have a check that your remoting destinations are shown starting correctly for both WAR files, and see if there are any messages in the log that might be relevant. -
Fails when create oracle internet directory in oracle identity management
Dear All,
I try to configure oracle identity management and always getting error when try to create oracle internet directory.
Running on windows 2008 server, oracle weblogic 10.3.4, oim 11.1.1.2.0.
This is the log file as follow ...
AdminServer port is 7001
trying to connect to VM-WindowsServer2K8 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to VM-WindowsServer2K8 7001
Successfully connected to the Domain Runtime ...
trying to connect to VM-WindowsServer2K8 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@1c58252
VM-WindowsServer2K8 7001
Instance idmfinal_2 already exists, continuing with component creation
D:\Oracle\Middleware\Oracle_IDM1 D:\Oracle\Middleware\idmfinal_2 idmfinal_2
oracle.as.provisioning.util.ConfigException:
Error creating ASComponent oid1.
Cause:
An internal operation has failed: oracle/security/xmlsec/util/Base64
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:861)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NoClassDefFoundError: oracle/security/xmlsec/util/Base64
at oracle.security.jps.internal.common.util.JpsCommonUtil.<clinit>(JpsCommonUtil.java:212)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:155)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:166)
at oracle.iam.management.oid.install.wls.OIDComponentHelper$3.run(OIDComponentHelper.java:2377)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.iam.management.oid.install.wls.OIDComponentHelper.delCredFromCSF(OIDComponentHelper.java:2372)
at oracle.iam.management.oid.install.wls.OIDComponentHelper.removeCreds(OIDComponentHelper.java:2363)
at oracle.iam.management.oid.install.wls.OIDComponent.onRemove(OIDComponent.java:423)
at oracle.as.config.impl.OracleASComponentBaseImpl.remove(OracleASComponentBaseImpl.java:286)
at oracle.as.config.impl.OracleASComponentBaseImpl.remove(OracleASComponentBaseImpl.java:173)
at oracle.as.config.impl.OracleASComponentBaseImpl.remove(OracleASComponentBaseImpl.java:154)
at oracle.iam.management.oid.install.wls.OIDComponent.onCreate(OIDComponent.java:221)
at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:144)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
... 15 more
Caused by: java.lang.ClassNotFoundException: oracle.security.xmlsec.util.Base64
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
... 32 more
progress in calculate progress33
please help me to solve this problem.
Regards,
-RanubayaI hit retry and now the "Create Oracle Internet Directory" completed successfully. But now the error is on "Start Oracle Internet Directory". Following error appears in the log file:
*[2011-01-06T17:11:51.929-06:00] [as] [WARNING] [] [oracle.as.config] [tid: 37] [ecid: 0000IpSwWP60jo8yBgpIcT1D9XrH00000S,0] Failed to start component oid1[[*
oracle.as.config.ProvisionException: HTTP status code = 400 : No processes or applications match the specified configuration.
Please assist! -
Logon fail when creating Connection in Crystal Reports SP3
Greetings,
I am working on an issue where we have installed the SAP GUI 7.10, Crystal reports 2008 SP3, and SAP IK FP 3.1.
We are testing the access to ECC. We have setup the server in the GUI and can successfully logon to the server in the GUI. We open Crystal Reports, select File -> New -> Standard Report, scroll down to SAP Table, Cluster, or Function, and the SAP System Logon window pops up.
Select the ECC system, click Next, and input the logon info for the system. Click Next and do not check the box for generating a RFC trace file, then click finish.
This results in a new window popping up. The title is Crystal Reports, and the contents of the window are as follows...
Logon failed.
Details: <bunch of Chinese characters>.<more Chinese characters>
We are using the language setting of EN on the SAP server, and in the GUI configuration. Not sure why we are getting Chinese (we have verified it as Chinese with a person here who can read some Chinese. he says that the first part is "something about server not valid")
We asked a user who does have a working install using CR 2K8 SP2 and SAP IK SP2 to try the login and he had the same results on this system.
We can use the same SAP account to login to InfoView without an issue.
Any suggestions?i had the same problem.
it has something to do with the sap gui logon settings.
1. go to your SAP logon ECC-properties (start sap-logon; right-click on your ecc connection)
2. go to the Codepage-Tab
3. set Language to default (standard)
then it should work.
br
thomas -
Validation Failed when creating Web Service Proxy
Hi
I am having trouble creating a web service proxy in JDeveloper (11.1.1.3). When I enter the endpoint URL (which is a https WSDL file). I get the following error:
No WSDL document could be found at https://host:port/.../.././...wsdl.
I can open the WSDL in SOAP UI and it accesses it fine and I can call the service within.
When I put it in a browser I need to enter the authentication details before I can view the WSDL.
But I can't get to the next step in the Web Service Proxy wizard, I've had a look in the threads before an couldn't find any help.
Is there anyone who can help me with this?
Regards
SaheemThanks John but unfortunatly that didn't help.
I removed the proxy but the WSDL was still not found I also added the host to the Proxy exceptions list and switched the proxy back on but this did not work either.
I also tried the method in the link you provided. But I get an error when attempting to create a Web Service Dasta Control too. The error I get here is:
DCA-40002: The WSDL document is invalid due to the following reason: WSDl Exception: faultCode=PARSER_ERROR: Failed to read wsdl file at: "https://../../..wsdl", caused by javax.net.ssl.SSLHandshakeException. :........... -
Fail when creating routing through bapi.
what are the mandatrory steps to create routing using bapi fm ( bapi_routing_create )?
when i create routing using bapi it is showing the routing is created succesfull but it is not updating in the standard table plko .after bapi use commit
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. -
Upload image failed when create image asset
I am using JSK, run on Tomcat, each time when I try to create Image Asset, and upload a image file, I will get "Upload failed" error, and there is not much information for me to debug the exception, anyone saw the same error? Thanks
I happen to spot the root cause of the problem today by simply changing the Web Browser, my previous Firefox is too old, if using Firefox version 22, upload file will be fine
-Liang Yi -
System Image Utility 10.6.3 - fails when creating NetBoot image from DVD
System Image Utility 10.6.3, trying to create a NetBoot image from a bundled installer disc that came with a 27" Late 2009 iMac (iMac11,1). Image creation fails consistently, since the image that System Image Utility creates is only 901M.
Anyone see this before?
Don
--------- System Image Utility log ----------
Workflow Started (2010-06-16 14:03:02 -0700)
Starting action: Define Image Source
Finished running action: Define Image Source
Starting action: Create Image
Starting image creation process...
Create NetBoot Image
Initiating NetBoot from Install Media.
Creating working path at /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD
Creating disk image (Size: 901 MB)
Finalizing disk image.
created: /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD/NetBoot.dmg
Attaching disk image
Installing to destination volume
2010-06-16 14:03:38.126 installer[2365:6f03] Looking for system packages
2010-06-16 14:03:38.129 installer[2365:6f03] no system packages found
2010-06-16 14:03:38.130 installer[2365:6f03] No or Invalid system receipts found on /private/tmp/mnt.LjFArn
2010-06-16 14:03:38.130 installer[2365:6f03] Attempting fallback using: /System/Library/PrivateFrameworks/SystemMigration.framework/Resources/FallbackS ystemFiles.plist
2010-06-16 14:03:38.175 installer[2365:6f03] Finding system files...
2010-06-16 14:03:38.619 installer[2365:6f03] Writing system path cache.
2010-06-16 14:03:38.623 installer[2365:6f03] Error writing cache to /private/tmp/mnt.LjFArn/Library/Caches/com.apple.FindSystemFiles.plist
2010-06-16 14:03:38.625 installer[2365:6f03] Failed to enumerate /tmp/mnt.LjFArn/Library/Caches, cannot prune (
"com.apple.userpictureCache"
installer: Package name is Mac OS X
installer: Installing at base path /private/tmp/mnt.LjFArn
installer: The install failed (There is not enough space on this disk to install the selected items. Deselect at least 6.46 GB and try again.)
Script is done.
NetBoot creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.Brian Nesse wrote:
Hi Don, here's my guess...
The 901 number is additional space added in the scripts. This indicates that the source image size was 0.
Since you are making a NetBoot from Install media, under the covers the installer process is being run to create a NetBoot volume. The media shipped with the 27" iMac is most likely CPU specific and thus the installation fails because you are trying to create the image (i.e. install the system) on an unsupported CPU.
In order to produce a NetBoot from the install media, you'll have to create it on the 27" iMac.
Hi Brian,
Thanks for the response. This makes perfect sense. I'll give this a try and shout back!
Thanks,
Don
Maybe you are looking for
-
Installation problem on AIX ( SAP4.7, Oracle-9i)
Hello Gurus, We are installaing SAP4.7 on AIX with oracle-9i as an database we have completed central instance successfully, while database instance we are facing error I am attaching error log for your referenec error log You entered: /sapcd/oracle9
-
Overview City Model, Dashboards, Reports BW and Ad-hoc reporting
Hello everyone, We have different informations views from CCLM. Overview City Model, Dashboards, Reports BW and Ad-hoc reporting. I would like to know Which cubes and tables are Involved in each one of theses reports. I know Ad-hoc reporting (RAGS_CC
-
Need to move music from laptop to external hard drive
My laptop is getting full. I need to move either some of my i-Tunes material to my external hard drive or all of it. I tried to click and drag it over but it would not go. I am a computer dunce so any help you might offer would be greatly appreciated
-
Help needed with process to call an external web service from within ABAP
Hello, I have an understanding of how I can provision web service from within SAP so that it can be consumed by external apps. Now, I am in need to know the, how I can call an external non-sap web service (let's say a java application) or even a publ
-
Hello everybody, I am not able to arrange the things in my TabbedPane. I have put two tabs onto the pane. I will paste the code, see if anybody can help. // This is the main program, there are two other classes in two different files. import java.awt