Form open through IP Address instead of Servername in URL !

Hi all,
We have forms 11gr2 64-bit with JDK 7 update 9 on server and JRE 7 update 25 on clients PC.
I m facing problem in one of my client's PC. Please note following;
http://svr:9001/forms/frmservlet?form=new, it doesn't open my form and shows error.
http://192.0.0.1:9001/forms/frmservlet?form=new, it open my form successfully without any error.
i.e. when we enter Name of server in URL, it doesn't open my form. But when we enter IP Address of server, its ok.
We have to use Name of Server, as it is defined in global variable, which is used to open Reports. As such, if we use
IP Address in URL, it doesn't open reports at all.
This problem occurs in one of my client PC, other client PCs are OK.
Please guide !
Thanks/Regards,
Dass.

Hi
as Sham has explained, but in the "hosts" file on the local pc not the server and also the other way round
ie
srv 192.0.0.1
It's the local file which will be used to translate the name "srv" into the IP address of "192.0.0.1" for the local pc network software to be able to "look out" to that address.
So that when you request "srv" the "hosts" file can be inspected and the IP address of "192.0.0.1" returned as the translation
Rod

Similar Messages

No website is opening through firefox address bar how to solve this

I think because of some virus or some configuration problem. The url which I type in the address bar is not opening. However I can search through google toolbar and google website. I get links when I click them website is opening but not opening through address bar also the suggestions are not loading in address bar. I tried uninstalling and reinstalling firefox but same problem. Also after opening website the url of website is not visible in address bar

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

InfoPath form opens in the browser instead of InfoPath Filler when a link is clicked from the Approval Task email

I have an admin approved InfoPath 2010 form that is web enabled. It is published to a SharePoint 2010 Forms library and an Approval Workflow is attached to it.
The form needs to open up in the InfoPath Filler with the Workflow Task bar at the top so users can approve the task from within the form and not go to Tasks list to do so.
Here's a problem I am experiencing: sometimes the form opens in InfoPath Filler and sometiems it opens in the browser when the link to approve the form is clicked form the email that is sent by the workflow.
Windows 7, IE 9, MS Office 2010:
The form opens up in InfoPath filler like it supposed to. The Workflow task bar is there for users to approve the form.
Surface Pro with Windows 8.1, IE 11 and MS Office 2013
The form opens up in the browser and there is no Workflow task bar at the top.
Things that I've already looked at and tried which didn't solve the issue:
- The forms library is exclusivly set to open documents/forms in the Client Application
- Set the browser compatibility mode in IE 11, that doesn't work too well, because you have to do it every time you open the browser.
- Setting browser compatility in IE 11 reintroduced another issue, of multiple login promts, which was fixed by entering the SharePoint site in question into the Trusted sites by a group policy. Adding the site to trusted sites made the forms open up in the
browser.
- Researched compatibility issues with InfoPath and Windows 8.1, cannot find anything.
- Researched compatibility issues with InfoPath 2010, Windows 8.1 and SharePoint 2010, also didn't find anything.
Can someone offer a suggestion on how to fix this problem, preferably with no code, because we are not allowed to put custom code on the server?
I need to force InfoPath form to open in InfoPath Filler when the link to the form is clicked from the Workflow email. Also the login prompts should not pop up. Need it to work on all the platforms: Windows 7, and Surface Pro Windows 8.1.
Thank you.

Hi,
Thank you for your response.
[Steps about how to capture the capture the fiddler log]
===========================================
1. Download fiddler from
http://fiddler2.com/
2. Install fiddler and launch fiddler.
3. When the fiddler be launched, the log will be enabled automatically.
4. You can click “X” to remove all the records before you reproduce the issue.
5. If the web site has been configured to https. Please enable https option:
Click “Tools” -> “Fiddler Options”
Switch to HTTPS tab, then check “Capture HTTPS CONNECTs” and “Decrypt HTTPS traffic”.
6. Then repro the issue.
7. Click “File”->”Capture Traffic”, uncheck the Option “Capture Traffic” to make sure the “
” is not shown, that mean the logs has been stopped.
8. Click “File”->”Save” ->”All sessions”, save the file.
Any quesitons, please let me know.
Best Regards,
Dats Luo

Firefox website shortcuts only open to my homepage instead of the correct URL

so i have a windows 8 laptop that i had installed firefox on. i have a few shortcuts to websites like youtube, facebook ect. However when ever i open them it just opens up to my homepage which is "google.com" instead of the correct URL.
The same issue occurs with any other browser like IE but im going to be using firefox that's why i asked on this forum.
the computer im asking the question on is not the computer that im having the issues on.

Does this only happen when Firefox isn't running or also when you already have a Firefox window open?
Make sure that Firefox is set correctly as the default browser.
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work
*http://kb.mozillazine.org/Default_browser
You can check for problems with DDE.
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

I would like to find out how I can setup my Mac Air to allow me to have an email template open up in Outlook instead of Mail when I click on an email address on a website.

Can anyone help me with setting up my Mac Air, to allow me to have an email template open up in Outlook instead of Mail when I click on an email address on a website?

All the limits you mention 100 e-mails at a time and 500 in a four hour time frame are limitations imposed by your mail provider, not Thunderbird. Thunderbird places no restrictions on the maximum number of recipients.
Have you tried turning your computer off for a few minutes?

I just sent a text message to someone else with an iPhone and it came through from my email address instead of my phone number.

I just sent a test message to someone I just met from my iPhone to her iPhone and it came through from my email address instead of my phone number. This seems very strange. Anyone know why this might happen? It seems like a potentially big privacy problem.

likely the iMessage feature it does so to save you money as sms's are mostly charged by the sms where data is not
read more here
http://en.wikipedia.org/wiki/IMessage
you can disable iMessage in the settings of your phone

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Why can't I use my previous MobileMe email address instead of creating a new one?

Why can't I use my previous MobileMe email address instead of creating a new one? When signing up for iCloud I'm asked to choose an email address [email protected] I am already using an @me address via moblileme. When i input that address it states that that address is already taken. Try picking a new one. I don't want a new one I want to use my mobileme address. How can that be done?

It appears you set up a new iCloud account rather than migrating your MobileMe account over to iCloud. I migrated everything over this morning and am still using my old MobileMe email address.
Check to see if you can migrate rather than open a new account.
Lew

I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm

Can I set FF to automatically open in Google when I open a new tab instead of having to also click on the Home button?

I often open a new tab and I'd like it to automatically open in Google.com rather than a blank page. Is there a way to make this happen? (I know I can click on the + to open a new tab and then click on the Home icon at the far right of the web address bar but I'd like to have Google open in one click instead of two).

You can middle-click the Home button to have your homepage open in a new tab. Or you can install this extension and set its' option for your homepage. 
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

When I open firefox I get this message; The address isn't valid The URL is not valid and cannot be loaded.

I get this message whenever I open firefox or a new tab. Anything I had tabbed to the top has gone, and the original homepage which shows all my recent visits is invalid. The full message is:
The address isn't valid
The URL is not valid and cannot be loaded.
Web addresses are usually written like http://www.example.com/
Make sure that you're using forward slashes (i.e. /).
Try Again.
Help mee!!!

Hi fredmcd-hotmail
It's not that I'm typing anything in wrong, it's when I first open Firefox or a new tab. Instead of displaying the firefox page showing my recently viewed websites it's just an invalid URL. Why would I be blocked from this page?
Thanks

Is it possible to setup an alert before the form opens?

Is it possible to setup an alert before the form opens? If yes how would I do that?
I have tried to create an alert in preOpen java script but the "preOpen" option is greyed out.
thank you

The iPhone will set up any version of the AirPort Extreme from Generation 1 through 6.
Once you have the AirPort setup, you might want to downloand and install AirPort Utility to be able to make any changes or adjustments to the AirPort.
AirPort Utility on the App Store on iTunes

How do I make a submit button that sends the form to an email address?

I can see how to link to an email which then opens up an email someone could attach the form to. But I do not see how to make a button that automatically sends the form to an email address. Can someone provide assistance? Thanks!

I have the same question. You'd thing this would be a no brainer requirement for a form.

Not able to connect through IP address of own machine

I am able to access IIS through localhost or 127.0.0.1. But I am unable to connect through machine's IP address.
e.g. I can browse http://localhost:8080/<application>
But unable to open through http://<local machine IP>:8080/<application>
Please suggest......
Thanks in advance
Devi

Do you have a proxy configured in your browser? If yes, add your machines address to the Exceptions list of the proxy (open the settings dialog of your webbrowser, look for connections or something and proxy - there should be some entry field containing at least "localhost" or "127.0.0.1" - add your IP there)

Send email using Oracle Forms 6i through Outlook Express

I am working on oracle Forms 6i and Oracle 9i (9.2.0.1) database. My requirement is How to trigger email sending single client at a time while using Oracle Forms 6i through Outlook Express?
To do this I have written the following code.
PROCEDURE send_mail IS
OutlookApp OLE2.OBJ_TYPE;
NameSpace OLE2.OBJ_TYPE;
MailItem OLE2.OBJ_TYPE;
OLEPARAM OLE2.LIST_TYPE;
Send OLE2.OBJ_TYPE;
Attachments OLE2.OBJ_TYPE;
Attachment_dummy OLE2.OBJ_TYPE;
var1 varchar2(1000);
Begin
var1 := :mapiole.message;
OutlookApp := OLE2.CREATE_OBJ('Outlook.Application');
OLEPARAM := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(OLEPARAM,'MAPI');
NameSpace := OLE2.INVOKE_OBJ(OutlookApp,'GetNameSpace',OLEPARAM) ;
OLE2.DESTROY_ARGLIST(OLEPARAM);
OLEPARAM := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(OLEPARAM,0);
MailItem := OLE2.INVOKE_OBJ(OutlookApp,'CreateItem',OLEPARAM);
OLE2.DESTROY_ARGLIST(OLEPARAM);
OLE2.SET_PROPERTY(MailItem,'To',:to);
OLE2.SET_PROPERTY(MailItem,'Subject',:subject);
OLE2.SET_PROPERTY(MailItem,'Body', var1);
--add an attachment
if :mapiole.attach is not null then
Attachments := OLE2.GET_OBJ_PROPERTY(MailItem,'Attachments');
OLEPARAM := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(OLEPARAM,:attach);
Attachment_dummy := OLE2.INVOKE_OBJ(Attachments,'add',OLEPARAM);
OLE2.DESTROY_ARGLIST(OLEPARAM);
end if;
Send := OLE2.INVOKE_OBJ(MailItem,'Send');
--destroy objects
OLE2.RELEASE_OBJ(MailItem);
OLE2.RELEASE_OBJ(NameSpace);
OLE2.RELEASE_OBJ(OutlookApp);
END;
Create a block called MAPIOLE with the following canvas layout:
To: ============================
Subject: ============================
Message: ============================
============================
Attachment: ============================ SEND
When I press the SEND button then
Error comes "FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception
ORA-305500
How can I do this?
When I use Microsoft Outlook 2003 It works fine.
Please help me.
Thanks.

Error comes "FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception
ORA-305500
hi
plz if there is any attach library recompile it or open the pll and compile it with ctrl+shift+k and ctrl+t.
sarah

Form open through IP Address instead of Servername in URL !

Similar Messages

Maybe you are looking for