Form Opening is Very slow while opening from client PC
We are running forms application in 10.1.2.0 application server. We have a peculiar issue of slowness while opening forms from client PC's and not while opening from application server itself.
1) When opening the form from a Windows 7 PC it takes around 25 seconds
2) When opening the form from a Windows XP PC it takes around 15 seconds
3) When opening the form from the application server itself it took less than 3 seconds .
In essence all forms when opened from application server are opening very fast and when opened from client PC's it takes undue time. What might be the reason for the same, can anyone help us and we are pondering over this issue for some time. What are the files of interest to be visited for these kind of issues. We enabled tracing level 5 in JRE and could not find any thing fishy over it.
Request application server and forms experts to participate and help us to resolve.
Thanks in advance.
Edited by: ramarun on Sep 9, 2010 8:27 PM
Hi ramarun,
In etc/host file, enter hostname and IP Address entry in client machine...
or try to access application via IP Address.
I hope it will work for you...
Regards,
Ajinkya
Similar Messages
-
Forms Opening is Very slow when opened from Client PC's.
All,
We are running forms application in 10.1.2.0 application server. We have a peculiar issue of slowness while opening forms from client PC's and not while opening from application server itself.
1) When opening the form from a Windows 7 PC it takes around 25 seconds
2) When opening the form from a Windows XP PC it takes around 15 seconds
3) When opening the form from the application server itself it took less than 3 seconds .
In essence all forms when opened from application server are opening very fast and when opened from client PC's it takes undue time. What might be the reason for the same, can anyone help us and we are pondering over this issue for some time. What are the files of interest to be visited for these kind of issues. We enabled tracing level 5 in JRE and could not find any thing fishy over it.
Request application server and forms experts to participate and help us to resolve.
Thanks in advance.Even if it's a generic issue you need to break it down in smaller parts to actually get a clue what's causing your problem. By now there is nothing we can rule out as the only thing we know is that it's slow on the client PC's.
Building a small dummy form as suggested by Andreas is a good starting point. If the performance is also bad for a small form with one block you can rule out that it has anything to do with forms and it's caused by e.g. your network. If the small form performs well rebuild one of your forms step by step and do tests for each step. By that you should find what's causing troubles.
What you can also take a look at are network roundtrips: You have to set the console window of your forms, and enable networkstats in your formsweb.cfg
networkStats=yesA typical cause for (unnecessary) roundtrips are e.g. calls to the synchronize built in or timers. If you are using Javabeans you should also take a look at them. If you are looking at your network traffic wireshark is your friend ;).
cheers -
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Photoshop CC very slow to open after Win 8.1 upgrade
Hi guys.
I was wondering can you help me. I have tried extensive google searches with no real conclusive answer. I recently upgraded from Win 8 to 8.1. Since the upgrade Photoshop CC is very slow to open. It can take 1-2 minutes to boot up fully. Lightroom 5.2 & bridge open fine. I have a pretty fast system with i7 3.4Ghz Processor & 32Gb of Ram with the OS running on a 256Gb SSD Hard Drive. PS CC booted up fine on Win 8 but not anymore since the upgrade. The only plug-in I run is OnOne Photosuite 8. I have even tried disabling loading extenions at start up from the preferences menu but it makes no difference as it can stil take 1-2 minutes to open. Any help appreciated??There was a Photoshop update that corrected a problem Adobe had accidentally introduced with a link that went to a network resource that is not available for anyone outside Adobe. But that was a while ago. See: Re: Photoshop CC startup slow (much harddisk access)
I've had Win 8.1 all along and never had an update cause a slowdown.
Unfortunately problems that go away on their own often return on their own. I hope that's not the case for you and that it continues to work properly.
-Noel -
Since installing OS X 10.8.2 Safari is very slow to open sites
Since installing OS X 10.8.2 Safari is very slow to open sites
Do you get a notice that Safari has quit unexpectedly? If so, please do the following.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
8800 Very Slow At Opening New Messages
I have a 8800 running the 4.5.0.124 version of the software and it is very slow when opening messages.
This only happens when opening unread messages and can take 1 minute+ to open. Once an email has been opened once it is instant. (Even messages that have only been read in Outlook). When it is 'opening' the message the device is completly unresponsive then will suddenly either open the message or if it has been longer it will lock the device.
I have also tried using the 4.5.0.55 software and this still has the same issue.
There are no entries being put into the error log while this is happening.Check these links:
Maximize memory and battery life
Optimize BB memory
Perhaps these article may help you to resolve your issue.
if your issue solved set "Solution" mark at the relevant post -
How to fix very slow opening window. I have vista 64. Since the last foxfire update it is very slow to open new windows. It can take some windows opening over a minute to open. (yes minutes not seconds)
Once a window is open I can open in new tab with no problem, but not with new window. (I like to have many windows open at a time)
When l click to open a new window either from a link or new window, it seems that nothing is happening. Then clicking to open another one which seems to open faster. Then all of a sudden the first window decides to open after about a minute or so. Sometime it seems to hang longer than other times.I did try the safe mode and didn't work. I did make iexplorer my default and then back again to foxfire and it somewhat worked. It was work not bad (but not as good as before) until I rebooted and it seemed the more I used it the better it became. Go figure :)
Well I just did another firefox update to 4 and it works perfect and maybe even better than before. (or I got use to how slow it was :) )
Thank You for you quick reply and I'm very happy for the new update... So far so good. -
Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Why my Illustrator CC is now very slow for opening a 2MB AI file (about 5 minutes), at the beginning (1 month ago) it was very fast (10 seconds).
Assuming that you system meets minimal requirements for CC, make sure you have enough space on your hard drive. By saying enough, I try not to cross 3/4 of its capacity but trivially saying, the more free space the better and the faster the drive the better (I've been considering an SSD drive but still running a regular HDD).
If you are on Windows, clean up the %TEMP% folder regularly and keep the disk neat using the defragmentation tool.
Click Start>Run>enter %temp% , wait for the files to load and select all, hit Shift+DEL to remove them permanently.
For the defrag tool, you can use either the defrag /? command from the command line or right-click the drive, click Properties > Tools > Defragmentation>Defragment Now
Other than that it requires deeper analysis to find performance bottleneck. -
AW6 is very very slow at opening PICT Docs
I have noticed that AppleWorks 6 is very very slow at opening Apple PICT Documents. The memory of AW6 jumps up tp over 1GB and it takes several minutes (if at all) to open these files. Which happen to open fine in OS 9.
Any idea what has happened to cause these files to not open or be very very slow? The original file is only 22KB.
I have noticed some of my drawing programs (Canvas x) fails to open these as well. However, Canvas 5 (OS 9) works fine.
I have a G4 with OS 10.4.9 and 986MB.
Thanks
DonYou can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I have an iMac, running x10.5. My email is very slow, even opening a previously downloaded message. The computer is otherwise fast. What gives?
Go to your User's Library folder. (if you don't know how to find, see this link.)
Scroll to Mail folder.
Select the V2 > MailData folder.
Delete any files in MailData with envelope in the name. (should be 3)
When you open Mail it will re-index your files.
If you have IMAP accounts, you might want to delete the accounts then add back so they download all messages from the server again. -
Have FireFox 3.1.6...less cumbersome. Lately it's been freezing up (can't close page without using Ctrl, Alt, Delete) and it is VERY slow to open. What's up with that?
Have made no system changes. Have Avast for antivirus,. which updates itself regularly.
Run Sys Defrag a few times a week. Don't know what else to do other than uninstall and reinstall.
OS = XP HomeMacAficionadodel90 wrote:
... Is there a way I can go back to 5.11?
Sorry downgrading is not supported by Apple.
MacAficionadodel90 wrote:
... Now my iPad starts up slower...runs slower...
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “... either from Backup or as New...
http://support.apple.com/kb/HT1414
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.. -
Firefox 7 is very slow in opening webpages as compared o firefox6
As compared to firefox6, this version, ff ver # 7.0.1 is very slow in opening the webpages. It takes a long time to show the webpage. I have tried to disable add ons and did everything i could,but there seems to be a no solution.
The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
See also:
*http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
MarkPages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark -
Open and Save Dialogs Very Slow to Open and Populate
In all of my apps, the Open and Save dialogs have become +very slow+ to open and populate since installing Snow Leapoard.
This only happens on one of my machines, and not others. (I've unmounted all connected drives, just to eliminate that possibility.)
Any thoughts on what this could be. The delay is significant (and feels like the old days of Windows, which I thought I'd left behind).The problem now appears to have gone away. The only change I've made is that I replaced an external drive that had recently died with a new one and gave it the same name as the failed drive.
Could a the dead drive have left something behind (or failed to leave something behind) that is stumbled over (or looked for and not found) each time the file system was accessed, and that got cleaned up (or re-created) when the new drive was connected and renamed?
Maybe you are looking for
-
How can I change the internal language of an app?
So I have seen that some app under their description say that they support multiple languages. I have downloaded some Japanese apps that say that they are available in english, should it automaticly change to english or is there suppose to be some in
-
Can someone help? I have never used GarageBand and would like to do something pretty basic. I have a DVD that I would like to extract parts of the audio and convert it to MP3. Is there a [easy] way to do this using GarageBand? I want to use the built
-
When I customize my presenter display so that I can see the time and the next slide on my screen, it doesn't work. I get just the normal view on both. Any ideas?
-
How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit. This is very annoying and we need this stopped as we have made no changes
-
Ok so I have been using my mac for over a year and i got the sims on it a year ago... everything worked fine up until the other day... ill click the icon on my toolbar and it hops a few times and closes... im not sure why it crashes and i tried unins