Form output type

Hi,
I have a form, how can I find out output type of that form.

Hi Shilpa,
Pls check this tables..
TNAPR , TRDIR Table for SAPScripts
STXFADM Table for SMARTFORMS.
Regards,
Viveks

Similar Messages

JJ Form - Output type issue

Hi Friends,
I've created a JJ Form(Smartform) and it's to be called by material document number thru tcode MB02 or MB90.
For this, My MM consulatnat has also created a new output type in ME-inventory management with my calling print output program 'RLE_DELNOTE' and my form name.
But when calling the output thru Tcode MB02/MB90, the Form is not coming out and it saying output could not be found....and also in log, it says,
Note: Log not from current processing run
Processing log for program RLE_DELNOTE routine ENTRY
There were no deliveries that matched the criteria you specified.
FYI...
If i assign my inventroy management calling program, it says the output could not be found and Processing routine in program ZMMSS0002 does not exist.
(my smartform working fine while executing thru FM)
Pls advise me, where i did the mistake and how to assing my calling print program and form routine.
thanks & regards
sankar.

Hi,
The print program: RLE_DELNOTE which you are refering is the right one? In mysystem it is been assigned to different output types like LD00 etc, which all comes under application V2 which is related to Sales.
Where as Mateial document does not comes under Sales.
Please check with your functional consultant, whether your have assigne the correct program, under correct application type.
Cheers,
Ashok

Driver program for GI(goods issue) smart form output type WA01

Hi,
i have designed one smart form for GI o/p type WA01 for Tcode MIGO ,but could get any standard driver program becoz in our server the standard program is for the script and not smart form.can anybody help me in finding the standard driver program for trigerring the smart form.

Hi,
Try prog SAPM07DR.
Paras

Form for Output Type LD00

Dear Experts,
THis is regarding form for LD00.
I am from EH&S module.
For getting DG data on form, there is one std form in sap which is RVDELNOTE. The respective print program is RVADDN01
I have replaced this LE_SHP_DELNOTE with RVDELNOTE then I am getting error: Output could not be issued
As this is script and not the smartform, I have tried following two combinations In transaction NACE, but still error continue
Combination 1)
Medium: Print Output
Program: RVADDN01
Form Routine: ENTRY
Form:BLANK
PDF/SamartForm Form: RVDELNOTE
Type: BLANK
Combination 2)
Medium: Print Output
Program: RVADDN01
Form Routine: ENTRY
Form:RVDELNOTE
PDF/SamartForm Form: BLANK
Type: BLANK
again if I assign LE_SHP_DELNOTE, it is working fine..
on the other hand, RVDELNOTE is also Standard SAP Script. I have not done any changes in it.
Pls guide,,
Edited by: Amol Joshi on Jan 12, 2011 12:25 PM

Problem resovled at my own..
Thanks...

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

How to find output type givenSapscript form name and print program name

Hi Experts,
Can anyone tell me how to find the output type of a sapscript form if the print program name and sapscript form name is
known.

Hi,
There are two ways:
1. Use table TNAPR .. Here is table give PGNAM as your print program name and FONAM as form name.. Now the field KSCHL will be the output type assigned to your script.
2. You can also check the NACE t-code.. In that select a application(Corresponds to your area) -> click on Output types tab -> Here you get list of output type.. You need click on Processing Routine folder to get all other info..

List of script and smart forms(except TNAPR) with output type or print prog

How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this

Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

Problem in output type determantion in smart forms

Hi all,
I have one problem in smart forms mentioned below:
In this program RVADOR01 i hav used RVORDER01 for displaying the output in the output type determination(print preview) for a particular quotation no.
In VA23 for a particular quotation I clicked on preview button and i got d output for smart form(RVORDER01).
Can u plz tell me where i can find that in which part of d program(RVADOR01) is d QUOTATION NO called.
so that i dont want to hard code the quotation no in the program.
Thanks
Regards
SANJAY CHOBDAR

not really helping you on the issue, but some things here need clarification i sense.
Outputtype determination has actually NOTHING to do with print preview.
In output type determination the output types for the actual document get determined via output schema which is assigned to either documenttype or itemtype.
RVADOR01 is the SAP-standard (SAP-SCRIPT) driver program for offers/orders.
RVORDER01 is the SAP-standard SAP-SCRIPT form for offers/orders.

Finding output type and form for the transaction

hi all,
 i have a problem finding output type and form for the transaction j1iv .actually i need to find the standard output type and form name for the transaction j1iv. how can we do it.

Hi Abinash,
 Go through the following steps.
 1 . Go to the transaction NACE.
 2. You will be able to see the Application and description tab over
 there. Select the Application for which you need the output type.
 3. After selecting the Application..on the top you can see the tab--
 output types...click in that..here you will be able to see all the output
 types for that application.
 4. Now select a output type ..and on the left side u will be able to see
 the tab for processing routines...double click on it...
 5. Here you will be able to see the standard SAP program...the form
 routine...the form..attached to it..
 Please Reward..if helpful..
Regards,
Himanshu.

Print Form using Output Type

Hey Guys,
Can any one tell me how can i Print a SMARTFORM using its Output Type. Should i hav eto do anything with Print Program stuff.
Helpful answers will be rewarded.
Thanks,
Prashanth

You will have to call the SMART Form from your print program. The print program will be called by the standard SAP code, using the configuration that you will have to do in the NACE transaction.
Choose the specific application in NACE transaction, click on the output types. now, choose the output type, and clock the Mail and processing routintes and you can configure your print program and form here.
In side the program you will call the form.
Regards,
Ravi

Output Type for Form 16

Hi,
I want to know the output type for Form 16, from where i can find it..
Thanks

Hi P ,
have u seen the program of that Form 16? Run the program itself , it will give defalut output types.
i think its the Form name not the output type.
regards
Prabhu

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Print program and output type, form layout

Hi all
Where I can see output type for Account Statements. I cannot find it in NACE.
Regards
Mona.

Hi,
You can find them in spro settings under the
financial accoung->line items->correspondence->
Execute define form names for correspondence print.
Or
go to spro-> sapreference imp
go with find and provide this
Define Form Names for Correspondence Print
and go with enter
and select the approprite line with the corresponding discription
Accounts Receivable and Accounts Payable
Thanks,
NN.

Output type processing error for adobe forms

We have created one output type in NACE transaction for Application V1(Sales) and attached the Adobe form to that output type. Whevener i am creating or saving a quotation / Sales order that output type is not processesed rather it is giving an Express document error that 'Update was terminated'.
Please help me out to solve it.

It is processed as there was a issue in the program.

Form output type

Similar Messages

Maybe you are looking for