Form property doesn't copy

Hello Friends,
I want to Copy the Forms's Property named "Coordinate System"
but it doesn't copy
It is Very necessary for me to copy.
Any Idea !!!!
So, any idea to copy that property.
Thank You,
Chandan

hello,
Rosario Vigilante
it means i neither copy the form property "COORDINATE_SYSTEM " nor set it with programmatically .right !!!!
so, it is the bug of forms 6i .
Is there any other way to access this property ?
Thank You,
Chandan

Similar Messages

Forms property 'Maximum Query Time'

Running Forms 6.0
I would like to use the forms property
'Maximum Query Time'
It doesn't seem to work.
Do I have to make some kind of setup on the server?
What unit is 'Maximum Query Time' - seconds?
- Flemming
null

Hello pradeepantony,
According to the help file, that property is:
Provides the option to abort a query when the elapsed time of the query (in seconds) exceeds the value of this property.
How you would use it would be if you did not want your user to sit and wait a significant amount of time while a query executes. Some processes can take a fair amount of time on a busy database. Setting this property will assure your user will not wait any longer than the number of seconds you set in this property.
I have a couple of stored procedures that take "many minutes" to execute. If a user had issued a query against a table that one of my stored procedures had locked and I had set this parameter, the screen would abort the query and not wait for my stored procedure to complete. Otherwise, the user would have to wait until the database freed up the table before completing the query.
Hope this helps,
Don.
You can reward this reply by marking it as either Helpful or Correct :)

HT1364 I am trying to change the location of my itunes library and the library doesn't copy to the new location.

I am trying to change the location of my itunes library and the library doesn't copy to the new location. I followed the steps in the help message (HT1364) exactly but I am not prompted to consolidate in the new location. Any suggestions?

Hi ed2345 and diesel vdub, when I consolidate, the files start copying to the new location and part way through I get a message that the copying failed (-50) even though all of the files are already in place in the new location. Should I just delete the itunes in the new location and manually copy the files again? But in itunes, I have indicated that the new location is on the external hard drive but itunes seems to ignore that and still looks for itunes in the original location on my internal hard drive. I disabled the location of itunes in the old location (by labelling itunes as "itunes old") and it tried to create a new itunes at the old location and prompted me to import music and videos from a CD or other source. I hope I am making sense.

Create Slideshow Display sequence property doesn't work

Create Slideshow Display sequence property doesn't work,
I have selcted random but the slideshow always plays in order. I searched the scripts for any logi related to this and other properties set, but cannot find any refernce to any of these propoerties:
transType='Random' transTime='1' firstImage='1' dispSequence='1'>
How can I make the slideshow start with a random image each time?
thanks
s

Hello,
I am back on this question, about how to get the non-flash version of the Creatr Slideshow v1.6 to display the images in a random sequence. Can anyone point me in the right direction, please?
thanks
juno

How to map a custom enum list to a custom form property in an extended incident class

Hi,
I'm struggeling to understand how to map a custom enum list to a custom form property in an extended incident class.
Here's what i want to have happen:
I am going to publish a request offering on my SMPortal for allowing users to submit basic IT incidents. I want the form to include "Whom does this problem affect" (answers(This is the custom enum list): Me, Multiple Users, Whole department or Whole
company), "What is the problem about", "Description" and "Attachments".
Here's what i've done:
In the authoring tool i created a MP for the custom enum list and put only the list in it. I sealed the MP and imported it.
I created another unsealed MP called TST.Incident.Library for storing incident library customizations and extended the incident class to add an extension class i called ClassExtension_Affected scope with a custom property i called AffectedScope. Then i am trying
to set the datatype of this property to "list". In the "select a list" dialog i cannot chose my previously sealed MP with the custom enum list in it. Why?
- Do i need to scratch the sealed MP and put the custom enum list in the latter TST.Incident.Library MP instead?
- If so, can i do that and keep this MP unsealed, or will i get an error on import saying "Unsealed management packs should not contain type definitions"
- Should i create one sealed MP for both the custom enum list and the extension class + custom property?

Hi,
Authoring Tool simply isn't informed about your list. Open the sealed management pack where you define the root of the list in the Authoring Tool and in the same time open TST.Incident.Library. You will have two opened MPs in the Authoring
Tool and be able to add a custom list for your custom field.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Facebook:

I have my contacts synced with icloud and exchange. I want all of them to be synced via icloud, I have tried turning contacts off and then clicking merge but that doesn't copy all of them over. How do I transfer all contacts onto my phone and then icloud?

I have my contacts synced with icloud and exchange. I want all of them to be synced via icloud, I have tried turning contacts off and then clicking merge but that doesn't copy all of them over. How do I transfer all contacts onto my phone and then icloud?

Welcome to the Apple Community.
If you can't do this on a computer, which would be much easier using drag and drop, then you will need to share the contacts with yourself in order to move them to the iCloud account.

1099 Form - Misc doesn't print 2 forms per page.

The 2007A PLD form that we have prints only 1 form per page. The 1099 forms that we have for MISC have 2 'forms' per page. I have tried scaling the size of the repetitive area so 2 vendors print per page, but I am unsuccessful. How does PLD know how many vendors (1099's) to print per page?

Our organization is having this issue with the new Adobe forms that were released. The 1099 smartforms print 2 forms per page but the 1099 adobe forms are only printing 1 form per the OSS note that was just released - Note: 1949022. Is there somewhere in config that we can select to print 2 per page?
We are using IDWTCERT_US_1099MISC which will print just 1 form per page ( we also had to make some adjustments because the top gets cut off...)
form IDWTCERT_US_1099MISC1 will print 2 forms per page but it is not a new vendor that prints on the form it is a copy of the first on the page
The 1099 Interest adobe form prints 2 per page with IDWTCERT_US_1099INT - this is curious too because the smartform prints 3 forms per page
Has anyone else experienced this issue? Do you know how to resolve it?I am considering putting in a problem report.
Thank you

Paramater form canvas doesn't display ...!

Hello alll
i am facing a problem ...!
Paramater form canvas doesn't display ...!
i have 2 canvases 1 content (useless) the second is stacked even though am setting raise on entery for the Paramater form canvas to yes
The content raise on entery is set to no
the windows primary canvas is the stacked but only the DEFAULT&SMARTBAR is displaying ...!!!
Help is appreciated pls.
Regards,
Abdetu...

It's Solved...! :)
There was a procedure in w-n-f-i calling window doesn't exist ...!!!
Regards,
Abdetu...

LineSeries form property missing in 2.01

I just "upgraded" flex builder to 2.01 from 2.0. It looks
like the LineSeries class no longer contains the 'form' property.
Has it been renamed?

The answer to my own question is that 'form' is now a style.
It can be set by:
myLineSeries.setStyle("form", myForm);

FORM PROPERTY CHANGES

In forms 6i,
Property of field in forms changes automatically. This
happens even when the property of field is set by property class
and also for other items.
I am unable to understand the problem in this. Has anyone faced
problem like this. Please reply us back on this.

We converted forms 4.5 version to forms 6i. A new width need
to be changed from varchar2(5) to varchar2(12). I made the
change in the form by setting the form property width to 12.
When i rechecked the field after some time, the width changed
back to the 5. Another major problem is database Yes/No
property for fields also changes drastically. Certain control
fields are set to database yes automatically. It would be of
great help if you can help us in sorting out this problem.
Regards
Raji

IPod Shuffle 2nd Gen. Doesn't copy the music into it

Hi, I used a different power source to charge my iPod then it doesn't copy the musics in it. but it turns on well and can be connected and detected in iTunes but it does not let me to copy the music and asks me for erase and sync but it frequently happens. Let me know if there is any electricity damage or something and how it can be solved. Thank you

I would try doing a Restore on the shuffle using iTunes. If this is a 2nd gen shuffle, when connected to iTunes, it should have a Settings screen. The button for doing a Restore in on tha screen.
The Restore will erase the shuffle, reinstall its software, and set it to default settings. It's possible that the shuffle's storage disk has data corruption. If there are no physical hardware problems, the Restore should get rid of the data corruption and give the shuffle a fresh start.
If you are using an Apple (or compatible) power adapter to charge it, that should not cause damage.

Forms 11gR2 doesn't support version control?

File, administration, checkin/checkout/source control options is disabled.
No Oracle Designer for 64 bit.
So, Forms 11gR2 doesn't support version control since Forms 10g?

See here:
Oracle Designer - Product Information</title><meta name="Title" content="Oracle Designer - Produ…
Oracle Designer 10g Release 2 is the latest stable release which is shipped with Oracle Developer Suite 10g Release 2.
also see here: http://www.oracle.com/technetwork/issue-archive/2010/toolssod-3-129969.pdf
Oracle Designer 10gwas the last version of this product, released as a component of Oracle
Developer Suite 10g. Oracle Designer was not released as a component of Oracle Fusion
Middleware 11g, nor is it planned to be a component of Oracle Fusion Middleware 12c. Oracle
Support continues to offer sustaining level support for Oracle Designer 10g.
For SCM see here:
http://www.oracle.com/technetwork/developer-tools/scm/overview/index.html
and here:
http://www.oracle.com/technetwork/developer-tools/designer/overview/oraclescmsod-129299.pdf
Oracle SCM has been placed into maintenance mode. This means that Oracle will
continue to fix bugs but there will be no new features added to the product. Error
Correction Support for Oracle SCM 6i ended on 01/31/2005, for Oracle9i SCM
on 06/30/2005 and for Oracle SCM 10g(9.0.4) on 12/31/2006 - in line with the
corresponding Oracle Designer 6i, 9i and 10g end of maintenance plans. Oracle
Designer 10g(10.1.2.2) is the currently supported product.
So in short: no Designer and SCM for 11g.
cheers

Why doesn't copy and past style copy the borders?

Why doesn't copy and past style copy the borders? For some reason it copies the style of the characters or numbers themselves but not any border formatting. Why is this?

Alasdair,
It would be speculation to try to guess what is going on with borders when using Copy Style and Paste Style, unless you know more about what is going on than I do. Sometimes border style is Copied and Pasted, sometimes it isn't. Based on my observations, it depends on the pattern of borders. I suppose that there could be an assignment of a shared border to one cell and not to the adjacent cell, so when copying the style you may or may not capture the border style based on which cell was selected during the Copy. I don't think it is possible to Copy/Paste a Style pattern, and I can't say why.
I find that it's most efficient to create a table with the desired pattern of border styles and to Copy data and Paste and Match Style into the table. I suppose that you have noticed that when you Copy an entire table, you capture the Style of that table. So, copy the Styled table and then paste the data into it.
Jerry

Why property doesn't change back to unspecified?

A serious flaw in forms is that after changing property of items from unspecified to sth. it doesn't change back to unspecified and doesn't take blank either although it says enter blank if u don't want to specify any property.
if i specify some property it mayn't suit my original settings. though a small problem, this may sometimes cause delay in work.

Hi palmetto2008, 
check this article: [[Font size and zoom - increase the size of web pages]]
 
Shortly, you can configure Firefox to display all text at a minimum font size. If a web page contains text that is smaller than your defined minimum size, Firefox increases the font size of the text to this minimum. To set a minimum text size:
* On the menu bar, click on the Firefox menu and select Preferences...
* Select the Content panel.
* In the Fonts & Colors pane, click Advanced....
* In the Minimum Font Size drop-down, select the minimum size in pixels in which all text must be displayed.
 
Regarding NoSquint addon, you should be able to override the default zoom options and keep your settings between Firefox restarts. 
See also here: [https://urandom.ca/nosquint/help.php NoSquint Help Page]
 
Apparently, there are many addons offering your desired feature like:
* Default FullZoom Level
* Zoom Page
 
Hope that helped you! Please report back!

FormDropDownList doesn't copy it's value

Dear readers,
I'm using Jdev 10.1.3.1.0 with Jheadstart 10.1.3.1.26.
My page is a form with a child table.
The form I use to lookup stuff and the table is only for bulk inserting.
I 'm using a formDropDownList on the form page and when I select a value of the dropdown I want to copy this value to a bean.
After the dropdown selection I'm pushing a Lov Light on the table page and there I want to bind the dropdown selection value to the query involved.
But #{bindings.BulkAvailableStartAcfDescriptionTransient.inputValue} in the code snippet allways returns null.
Also #{row2.Description} gives me null;
Is this because of the combination parent/formDropDownList child/lov?
This is the code snippet:
<af:selectOneChoice id="BulkAvailableStartAcfDescriptionTransient" value="#{bindings.BulkAvailableStartAcfDescriptionTransient.inputValue}"
label="Archive"
required="#{bindings.BulkAvailableStartAcfDescriptionTransient.mandatory}"
readOnly="#{!(createModes.CreateBulkAvailableStart)}" unselectedLabel="">

<af:forEach var="row2" items="#{bindings.ArchiveForBulkAvailableLookup.rangeSet}" >
<af:selectItem id="SiBulkAvailableStartAcfDescriptionTransient" label="#{row2.Description}" value="#{row2.Description}"/>
</af:forEach>

</af:selectOneChoice>
What can I do to save the value of the formDropDownList in a bean?
regards,
Marcel.

Hi Hartsord, and welcome to the Dev Forums!
The posted code has a couple problems that should be cleared up first:
@implementation DrawPoly
// remove these 3 lines:
// int polySides;
@synthesize polySides;
// this method needs to init the frame as well as the polyside property
// -(id)initWithSides:(int)newSides
- (id)initWithFrame:(CGRect)frame andSides:(int)newSides {
// does this code actually run? we don't expect it to run unless
// this object is created programmatically (i.e. not in IB)
NSLog(@"initWithFrame:%@ andSides:%d",
NSStringFromCGRect(frame), newSides);
// the designated initializer of UIView is initWithFrame
// self = [super init];
if (self = [super initWithFrame:frame] {
self.polySides = newSides;
// don't try to draw until self is added to the view hierarchy
// [self setNeedsDisplay];
return self;
Apropos the above comments, let us know whether the DrawPoly object is defined in IB or created in your code. If the latter please post that code. If the object is created in IB, you would need to override initWithCoder to set polySides during the process of loading the view from the xib file. Unless the assignment requires that, it might be easier to init polySides right after the view has finished loading:
// in the view controller implementation (assuming you're using a view controller):
- (void)viewDidLoad {
[super viewDidLoad];
DrawPoly *polyView = (DrawPoly*)self.view;
// if polySides has been set earlier, this is a good time to check its value
NSLog(@"viewDidLoad: polyView.polySides=%d", polyView.polySides);
polyView.polySides = 6;
// drawRect will be called automatically right after this method runs
// (i.e. no need to call setNeedsDisplay here)
Hope that helps!
- Ray
}

Form property doesn't copy

Similar Messages

Maybe you are looking for