Form recompilation for changed packages

hi all,
I wanted to know when (under what all possible conditions)is a form recompilation required for changed packages.
regards,
Rajiv

The error says: "identifier 'po_approve_c1.forward_check' must be declared".
The note 747508.1 provides a call to a procedure defined in CUSTOM.pll library. In my case the logic resides in POXAPAPC.pll which is PO specific.

Similar Messages

Local change requests being created for changing package info

Hi experts,
After a client copy of object into a new server whenever changes are being made to these objects local change requests are being created. i found that the above behaviour is because of the transport layer in the package, which was also copied during client copy, is of the old server. And when that was change to the one available in the new server the change to the package also got created as local change request. Now I wan this package to get transported to quality from development ( where the change was made). Please help.

Hi,
Thank you for your suggestion. I Created a Tp copy and included the local change requests in them and gave target system as quality system. There were 2 requests as local change requests, only one of them took the intended change in the quality but for the other the change made in the development system was not refelecting in the quality system.

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

Change package name of a form

Hi,
I want to change the package name of a Form in se71 from $TMP to a company package name. I would like to know the step by step process and direct answer please!
Points will be rewarded!
Thanks!

Hi there,
I believe the only solution for your issue is to open the form in the change mode,
then click on the File--> Save As and then give some name and assign the package,,
then you can always delete the previous form save in $tmp.
Let me know if you need further help.
Thanks-

How to change package for Process chain

Hi Experts,
How do i change the package in the Transport connection. Iam transporting a PC from D to Q.
1. I have some routines created in the infopackage.So i selected this one in the transport connection. I noticed under infopackages the following are also checked. a. infoobjects b. DataSource c. Infopackage d. Infopackage e. infosource f. transfer structure g. source system.will that cause problem in Q as I have them already in Q and P
2. How do i change the package in the transport..Currentl all of them are &tmp. Please help me with the navigatioln steps.
3. After clicking the truck icon, what shld i do ..do i have to transport the request as well. please provide me with steps.
Thanks
Dave
Message was edited by: Dave Marcus

1. I have some routines created in the infopackage.So i selected this one in the transport connection. I noticed under infopackages the following are also checked. a. infoobjects b. DataSource c. Infopackage d. Infopackage e. infosource f. transfer structure g. source system.will that cause problem in Q as I have them already in Q and P
Ans : If you have ticked Transport Check button for Infopackage then only Infopackage is transported. Underlying Infoobjects, Transfer Structure etc. will not be transported.
2. How do i change the package in the transport..Currentl all of them are &tmp. Please help me with the navigatioln steps.
Ans : once you have pulled the necessary objects in the Transport Connection, Right click on the relevant object and select 'Change Package' to change the package from $tmp to others.
3. After clicking the truck icon, what shld i do ..do i have to transport the request as well. please provide me with steps.
Ans : Assign the Package by following question2, then assign Transport Request by clicking on the Truck Icon in Transport connection for the objects you have collected and then go to 'SE01' Transaction give the request number which you assigned in Transport connection and click on 'Display' which displays the request and all objects assigned to the request. select the Task Request and click on Truck icon which will release the task and then select the Main Request and click on Truck icon again which will release the main request.
Thanks,
Vamsi

How to change package for the program or t code if package not available?

I have a T Code that was imported from ECC5 to BW system.
This t code as well as its program have a package ZXYBC assigned in ECC5 system.
However, the package that it was assigned (ZXYBC) does not exist in BW but exists in ECC5.
Now I am not able to do any modifications (in the BW system) to the T Code or its associated program as the Package ZXYBC does not exist in BW.
Note: Change Object Directory Entry does not work.
Any suggestions?
Thanks.

Open your main program of your TCODE in SE80 transaction.(Go to se93 transaction to get the program name for your TCODE).
Right click on the root node.
Other Functions->Change Package Assignment.
GIve the new package name (THis package should be already created in your system).
Regards,
Ravi

Default File Type for New Forms - How to change?

Hi,
How can I change propperty: Default File Type for New Forms?
It is enabled! Do I have to be Administrator to change it? I have SAP ALL..
SFP -> Layout -> Tools --> Options -> Document Handling
tnx, Adibo.

There is no authorisation required for changing the file type. You are saying its enabled, then you can change it.
Edited by: Nikhil Poojari on Aug 28, 2009 6:50 AM

Change Package For Many Bi Objects

Dear Gurus,
Before transformation, Is there any way to change package for many bi objects ?
Transport Coonection tab dont allow me to change package of these bi objects?
Cheers,

In the transport connection screen select the object -->send it RHS --> before changing the package make sure that object is not in any of the Transport request if so release the request using the Tcode :se09 and now select the object in the transport screen click on change package it will prompt a window where you can update the package and create TR for it.

Change package for report & subobjects

Hello,
I have a report and a lot of subobjects(screens, tranzactions,statuses,titles,dict. objects...) as local objects. Now I want to reassign to a new package. If I use the change package option I have to do it for every subobject. Is there a way to reassign the package for the report and all his subobject in one step?

hi
try out for tcode se80 to change you local objects to anathor package..
if you have lots of reports , transactions etc then go to
se03->object directory->change object directory entries-> give ur objects
and in package write $tmp to (ur package name)
hope it helps
Award marks if it helps

Change package assignment for report texts ?

Hi All,
How to change package/development class assignment for report texts.
Thanks & Regards,
Ramasubramanian G.

HI,
Go to transaction SE03,
choose option Change object Directory Entries,
choose object with key R3TR REPT
Give the program name

No way to view changes with PKGBUILD for community packages

I noticed that you can't view PKGBUILD changes for new community packages. I thought we move community to svn so it should be viewable.
Example:
http://repos.archlinux.org/viewvc.cgi/c … nity-i686/
Just my 2 cents.

Everything that is need for the transition is still a work in progress... This a known issues. As a workaround you can use ABS or check out the SVN for the packages you are interested in.

Pkgman - a bash script for local package and PKGBUILD management

hi all,
here is a script which manages a local repository and lets you edit
PKGBUILDs and other related files, automatically generates checksums,
build packages, add them to your local repo and so on.
it also has AUR support for submitting tarballs, leaving comments, etc.
get it from here:
http://sourceforge.net/projects/pkgman/
and AUR package:
http://aur.archlinux.org/packages.php?ID=17100
you need abs, curl and pacman and optionally namcap and desktop-file-utils.
RTFM online:
http://sourceforge.net/apps/mediawiki/p … n_man_page
first of all copy the pkgman.conf and AUR.conf files from /usr/share/pkgman to ~/.config/pkgman/ or ${XDG_CONFIG_HOME}/pkgman - if ${XDG_CONFIG_HOME} is set,
edit these two files and then run
pkgman --runmefirst
pkgman doesn´t install anything. if you want it just builds the package and moves it to your local repository. install it then with pacman.
it also has no dependency handling. there are many other tools which provide this.
the main intention was to keep track of package versions, different PKGBUILD versions and own AUR submitted tarballs; also to keep a clean local repository and clean build directories.
pkgman is stable now. i´m using it for months without any issues.
however, if there are problems or feedback please post them here.
vlad
changelog:
version 2.4:
*pkgman now respects the PKGDEST and SRCDEST variables from makepkg.conf. (though it still moves the src.tar.gz and .pkg.tar.gz to package backup directory).
version 2.5:
*pkgman uses PKGDEST if SRCDEST not set in makepkg.conf.
version 2.6 -> r26:
*changed version system: version 2.6 is now r26!
*minor changes: > pkgman uses now the $SHELL variable.
> new and more comprehensible manpage description (thanks to bender02)
version r27:
*changed SRCDEST since it's only a cache dir. all files (pkg.tar.gz and src.tar.gz) go to PKGDEST.
version r28:
*added new variable ShellCommand to pkgman.conf. Default is $SHELL.
*One might use an external application (like screen or xterm) to switch to build directory and edit files simultaneously.
version r30:
*minor changes. nothing crucial
r32: *OverwriteExistingPackage isn't used anymore. one can delete it from ~/.config/pkgman/pkgman.conf.
*minor changes
version r33:
*"-l|--list" also shows installed package version and available ABS/AUR PKGBUILD version for given package.
*"-a|--abs" can now also be used with other options (like "-e")
r39: * when backing up src.tarballs it asks whether to backup the source file or not
* more detailed "--list" option - also shows if package is installed or not and available ABS/AUR version
* added prompt to clean up directory after makepkg
* when checking pkg.tar.gz also possibility to check for conflicts with files of already installed packages
* use $PAGER instead of less
* --help directly shows the manpage
* --shorthelp shows a brief usage overview
* added a custom prompt, but only when using bash (is somehow experimental - works fine here for me)
* minor internal changes
* pkgman also reads ~/.aurvote file for getting aur name and password. if one already uses aurvote then there is no need for the
~/.config/pkgman/AUR.conf file.
r40: * new manual page & rewrite of usage function
* both option "--flush" and "--flushall" were omitted in favor of the more versatile "--cleanup" option
* pkgman <packagename> checks now if <packagename> is owned by user
* backup option after each editing
* added license
* minor internal changes
r41: * just small bug fixes, nothing crucial.
r42: * more bugs fixed.
r45: * new options added:
> --listversions: list local and available versions of installed packages from LocalPackages directory
> --getownpackages: synchronize local own packages with AUR
* added new variable in pkgman.conf:
> ListOutputInPager: output of, for example, "--list" or "--own" is piped into $PAGER
* added a new optional dependency "desktop-file-utils" for validating desktop entry files
* also supports now auto-generation of sha sums not only md5
* internal fixes due to AUR interface changes:
> use of json interface
> correct parsing of package category
* added 2 proto files (located under /usr/share/pacman):
> proto.desktop: a template for *.desktop files
> PKGBUILD-lib32.proto: a template for lib32 packages for x86_64
* some code changes and fixes
r46: * added new option to pkgman.conf (AutoGenerateSums).
> if AutoGenerateSums=no then pkgman asks whether to generate checksums or not.
> if set to yes it behaves like in former versions.
r52: * "--getownpackages" with more than 100 packages works again
* added new option "--cachecopy":
For each package in CacheCopyList (new variable in pkgman.conf) get existing package from pacman's cache directory - if
CopyPkgFromCache (new variable in pkgman.conf) is set to yes - and/or create a source tarball of PKGBUILD and related files from ABS -
if CopySrcFromABS (new variable in pkgman.conf) is set to yes - and copy them to package backup directory.
* added new variables to pkgman.conf:
> "CacheCopyList=file" - batch backup file, one package per line - default location is "$HOME/.config/pkgman/package.list".
> "CopySrcFromABS=[yes|no]"
> "CopyPkgFromCache=[yes|no]"
* some bugfixes
* docs completed
* CacheCopyList should look like
package1
package2
#this is a comment
! this too
package3
!package4
r54: * renamed "--listversions" option to "--diffversions". makes more sense!
from the man page:
pkgman --diffversions
Show differing ABS/AUR versions of installed packages from LocalPackages.
r55: * minor changes.
r57: * testing release
* added a new option "--rollback":
"pkgman <packagename> --rollback" - checks http://arm.kh.nu for available package versions,
lets you choose one, fetches the package and
moves it to the <packagename> backup directory (if "--repoadd" is used).
r59: * stable release
* new option "--rollback" (see r57):
it checks http://arm.kh.nu (Arch Rollback Machine) for available package versions,
downloads chosen file and moves it to local repository (if "-r|--repoadd" is used).
* posting files/comments/etc to AUR should work now again.
r65: *stable release
* new option "-M,--meta" to create metapackages and add them and their dependencies to local repository.
it searches for deps inside the backup directories, pacman's cache and if the packages are not available, it tries to fetch the missing
dependencies from the Arch Rollback Machine site (http://arm.kh.nu).
r66: * minor fixes
r68: * some bugfixes
* "--repoadd" and "--Reporemove" now accurately removes old packages from LocalRepository
r69: * small bugfixes when listing packages with similar names
* curl retries now 5 times if connection is not established
r75: * "--cachecopy" does not try to dl sourcefiles when backing up ABS PKGBUILDs
* some work on package splitting
* further internal changes
r76: * minor mistakes with "ln" purged
r79: * mostly small changes
* "--cleanup" now also removes uninstalled packages from LocalRepository
r81 & r80: * added AUR v1.6.0 support (use more json)
* small ARM changes ("--rollback")
r85:
* pkgman supports pkg.tar.xz packages
* some code rewrite, bugs purged (hopefully)
r113:
* pkgman now supports building split packages through makepkg.
If you already use pkgman you need to rerun "pkgman --runmefirst" after updating.
* new "-t,--template" option ("pkgman <packagename> --template <alt. packagename> [--pkgbuildversion <version>] [options]").
Useful to create a new PKGBUILD and use an existing one as a template.
* new option: "--conf /path/to/alternate/conf/file" - Specify another configuration file.
* pkgman now uses ${XDG_CONFIG_HOME}/pkgman or $HOME/.config/pkgman - if first not set - as the default location for its conf files.
r116:
* check inet conection when submitting src tarballs to AUR
* some bugs
* updated manpage on sf
For further details please read the manual page.
Last edited by DonVla (2010-04-28 11:56:59)

I'm having some troubles with it (perhaps missing dependencies, and forgotten hardcoded dirs?):
jan@aconcagua 8:20PM ~ % pkgman --runmefirst
/usr/bin/pkgman: line 77: /home/jan/apps/skripte/archscripts/pkgman/share/pkgman/color.bash: No such file or directory
/usr/bin/pkgman: line 1293: initcolor: command not found
/usr/bin/pkgman: line 312: highlight: command not found
/usr/bin/pkgman: line 312: error: command not found
/usr/bin/pkgman: line 313: highlight: command not found
/usr/bin/pkgman: line 313: error: command not found
/usr/bin/pkgman: line 314: highlight: command not found
/usr/bin/pkgman: line 314: error: command not found
/usr/bin/pkgman: line 315: highlight: command not found
/usr/bin/pkgman: line 315: error: command not found
/usr/bin/pkgman: line 317: error: command not found
/usr/bin/pkgman: line 318: error: command not found
/usr/bin/pkgman: line 321: highlight: command not found
/usr/bin/pkgman: line 321: msg: command not found
/usr/bin/pkgman: line 329: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
touch: cannot touch `/bin/.pkgman.registered': Permission denied
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 337: msg: command not found
curl: option --output: requires parameter
curl: try 'curl --help' or 'curl --manual' for more information
^C/usr/bin/pkgman: line 209: cleanoutput: command not found
/usr/bin/pkgman: line 209: cleanoutput: command not found
(I terminated with ctrl-c).
EDIT: errors resolved by correcting the path $HOME/apps/skripte/archscripts/pkgman/share/pkgman to /usr/share/pkgman in the pkgman itself.
Last edited by bender02 (2008-05-23 01:28:58)

Global default form field font change

Hi.
I've created a form in InDesign (CC 9.2.1) with mulitple text fields. Does anyone know of a way to globally change the font from Times New Roman to another in the PDF? This is the default font, but it clashes visually in the form. I'd like to change it to Arial or Helvetica (nothing fancy), which would better suit the form, and look much more professional than Times.
I've read that JavaScript can do this (when run from the Debugger console in Acrobat – my version is 11.0.06), but I don't know JavaScript well enough to write or debug it.
Manually selecting properties on every field would be very time-consuming, and there's no option to pre-select the font in InDesign. Plus, if I then amend the form or make changes in InDesign, I'd have to re-do all my properties changes.
I've also seen a comment (on here somewhere) where someone has altered a registry file to set the default font. I'm on Mac, so does anyone know of a similar method on Mac that might work? I'm happy to delve into package contents etc.
Has anyone had any success doing this?

Firstly, try changing the ContactID to a hidden field, and
just for the user
maybe display it on the page also.
<input type="hidden" name="ContactID" value="**put field
here**" />
As for the username, in your Application Panel under Bindings
click the +
and choose Session Variable and enter MM_Username. Drag this
where ever you
want it to appear, including the default value for a field.
HTH
Piers

Form opening for some users but not others

I created a form with an area for the recipient to simply type their name, save the document and email it back. This works for some but I have a user getting an error message:
"This document does not allow changes to be saved. Any changes you have made will not be included in the document when it's mailed. Do you want to continue?"
Could this be an issue with the user's Reader? They cannot save or email the document once they type in their name.

Reader XI is the first version of Adobe Reader that can save a filled in PDF form without any additional processing steps.
Versions of Reader prior to version XI could not save filled-in forms. Version 7 with updates was the first version of Reader that could save forms for which special Extended Reader Rights were applied to.
Which version of Reader are the users with problems using?
If before version XI and version 7 or newer, then you need to apply Extended Reader Rights to the form. For users with version 6 or older, they will have to upgrade to a newer version of Reader.

10.8.2 update: can't install "error occurred while evaluating Javascript for the package"

Greetings All-
I'm trying to update from 10.8.1 to 10.8.2 on my Macbook Air. When I downloaded the .dmg from Apple and ran it, I got the following error:
"OS X Update Can't be installed on this disk. An error occurred while evaluating JavaScript for the package."
So far, I've done the following, all to no avail:
(1) Updated Java to v7 per Java's website, no change
(2) Downloaded the 10.8.2 combo update, no change
(3) Found Apple's OS X Java update (which is still at v6)- get an error at install that "the contents of the disk can't be changed"
(4) Restarted at each step
Does anyone have any suggestions or ideas?
Thanks!

Permission repair, too?
Take a look here: https://discussions.apple.com/thread/3811748?start=0&tstart=0
And possibly here: https://discussions.apple.com/thread/3889562

Form recompilation for changed packages

Similar Messages

Maybe you are looking for