Form - Remote DB - Link - Synonym - ORA-00980: synonym translation invalid
All,
I have created a PUBLIC LINK AND SYNONYM on a table in a remote DB using the Navigator/Wizard. I then tried to create a FORM using the Wizard. In the Wizard I press enter to FINISH and I receive the error listed below.
Note I have read and read and re-read all info available to me on the subject. Some posts on MetaLink and these forums suggested that the Link and Synonym made Public - they are as they live in the Public Schema. Another doc stated the "Returning" statement was the problem.
I have tested this in SQLPLus and it works fine.
What is the is problem with this and how do I fix it?????
Thanks,
Bill G...
Error creating package PORTAL_DEMO.FORM_1
Line/Column Error
242/18 PL/SQL: ORA-00980: synonym translation is no longer valid
236/65530 PL/SQL: SQL Statement ignored
284/65 PL/SQL: ORA-00980: synonym translation is no longer valid
284/28 PL/SQL: SQL Statement ignored
284/16 PLS-00341: declaration of cursor '_tc' is incomplete or malformed
290/25 PL/SQL: Item ignored
321/30 PLS-00320: the declaration of the type of this expression is incomplete or malformed
321/13 PL/SQL: SQL Statement ignored
357/38 PLS-00320: the declaration of the type of this expression is incomplete or malformed
354/13 PL/SQL: Statement ignored
369/34 PLS-00320: the declaration of the type of this expression is incomplete or malformed
369/17 PL/SQL: SQL Statement ignored
380/30 PLS-00320: the declaration of the type of this expression is incomplete or malformed
380/13 PL/SQL: SQL Statement ignored
387/38 PLS-00320: the declaration of the type of this expression is incomplete or malformed
384/13 PL/SQL: Statement ignored
400/26 PLS-00320: the declaration of the type of this expression is incomplete or malformed
400/9 PL/SQL: SQL Statement ignored
464/63 PL/SQL: ORA-00980: synonym translation is no longer valid
464/26 PL/SQL: SQL Statement ignored
Yeah, it is pretty simple really. Metalink note 174618.1 covers it. The note is for Rel1, but the same works with Rel2.
Cut and paste doesnt work well here, but if you cant access the note, I can reformat it and paste it in here.
Similar Messages
-
ORA-00980 Synonym Translation Error caused by WebUtil?
I have setup WebUtil and applied some CLIENT_TEXT_IO code to a form. Everything worked perfectly running through 9iDS so I configured 9iAS to do the same.
When running the form through 9iAS I am getting the ORA-00980 error about synonym translation. The same database instance was used so so webutil_db shouldn't be the problem but I cannot see how this error could be related to WebUtil - anyone have any ideas.
The CLIENT_TEXT_IO code still works even though this error is reported.Since you are on 10g did you try flashback table feature - http://tonguc.wordpress.com/2007/01/01/oracle-10g-flashback-versions-query-drop-table-and-recyclebin-management/
FLASHBACK TABLE <tabname> TO BEFORE DROP;
If you didnt use purge option, the dropped object is on your recyclebin - http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9018.htm#sthref9593
Best regards. -
ORA-00980: synonym translation is no longer valid
Hi
I get the following error when try to insert xml
SQL> ed
Wrote file afiedt.buf
1 insert into "bulkCmConfigDataFile_TAB"
2 values(
3 XDB_UTILITIES.getXMLFromFile('Test.xml','DATA_DIR').
4 createSchemaBasedXML('http://127.0.0.1:8081/public/xsds/configData.xsd')
5* )
SQL> /
XDB_UTILITIES.getXMLFromFile('Test.xml','DATA_DIR').
ERROR at line 3:
ORA-00980: synonym translation is no longer valid
I ran the following sql
SQL> select STATUS from dba_objects where object_name = 'XDB_UTILITIES';
STATUS
VALID
The directory was created using
SQL> show user
USER is "XMLUSER"
SQL> create or replace directory data_dir as 'c:\xml';
Directory created.
What could be the problem here?
Thanks
Devashish
10g Rel2Devashish
Unfortunately the way your XML Schema are designed I do not think XML DB is going to be able to handle them. The problem is the substituion group for vsData. Basically it defines a very flat structure which will require a table with more than 1000 columns to persist. Since the structure is very flat we cannot use the technique of pushing sections of the structure into out-of-line tables to store it, which is the normal workaround.
This looks to me like a case of the classic mistake of modeling a Java Object structure directly into XML. In general this makes no sense. There is no common information between all of the different elements of the substition group or the vsData type, so there is no point in having all the members of the substition grouip descend from a single abstract type. You could just as easily model your XML Structure as a choice of any of the elements defined in the substition group. If new elements need to be introduced this could be done using extension of the existing complexType with new choices.
The advantage of this approach is that you can push each of the possible chocies into a seperate table, and avoid the 1000 column limit..
Sorry for the bad news, hope you have flexibility to re-architect the XML Schema. Note that this should not affect the instance documents -
Error ORA-00980: synonym translation is no longer valid when i issue
i accidentally drop one of my table. To bring it back i used Imp tool. But it gives an error ORA-00980: synonym translation is no longer valid when i issue
Select * from ship_sched_fact_notice_det
Action taken using Imp
Username: erpdada
Password:
Connected to: Oracle Database 10g Release 10.1.0.2.0 - Production
Import file: EXPDAT.DMP > e:\erpdada_august13.dmp
Enter insert buffer size (minimum is 8192) 30720> 30720
Export file created by EXPORT:V10.01.00 via conventional path
Warning: the objects were exported by SYSTEM, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
List contents of import file only (yes/no): no > y
Import entire export file (yes/no): no > n
Username: erpdada
Enter table(T) or partition(T:P) names. Null list means all tables for user
Enter table(T) or partition(T:P) name or . if done: ship_sched_fact_notice_det
Enter table(T) or partition(T:P) name or . if done: .
"CREATE PUBLIC SYNONYM "XMLTYPE" FOR "SYS"."XMLTYPE""
"CREATE TABLE "SHIP_SCHED_FACT_NOTICE_DET" ("SSFND_ITEM_NOT_DET_ID" NUMBER, "
""SSFN_FACTORY_ID" VARCHAR2(40) NOT NULL ENABLE, "SSFN_FAC_NOTICE_ID" NUMBER"
" NOT NULL ENABLE, "SSD_SHIP_ITEM_ID" NUMBER NOT NULL ENABLE, "OI_ITEM_ID" N"
"UMBER NOT NULL ENABLE, "ORDER_TYPE" VARCHAR2(1), "SSFND_ITEM_CODE" VARCHAR2"
"(300), "SSFND_QTY" NUMBER, "SSFND_CTN" NUMBER, "SSFND_TOT_CBM" NUMBER, "SSF"
"ND_REM1" VARCHAR2(256), "SSFND_REM2" VARCHAR2(256), "SSFND_UNIT_ID" VARCHAR"
"2(40), "SSFND_IS_EXCL_SUMMARY" VARCHAR2(1)) PCTFREE 10 PCTUSED 40 INITRANS"
" 1 MAXTRANS 255 STORAGE(INITIAL 81920 FREELISTS 1 FREELIST GROUPS 1 BUFFER_"
"POOL DEFAULT) TABLESPACE "ORDER_DATA01" LOGGING NOCOMPRESS"
. . skipping table "SHIP_SCHED_FACT_NOTICE_DET"
"GRANT DELETE ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"GRANT INSERT ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"GRANT SELECT ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"GRANT UPDATE ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"CREATE UNIQUE INDEX "PK_SHIP_SCHED_FACT_NOTICE_DET" ON "SHIP_SCHED_FACT_NOT"
"ICE_DET" ("SSFND_ITEM_NOT_DET_ID" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STO"
"RAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLE"
"SPACE "ORDER_DATA01" LOGGING"
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ADD CONSTRAINT "PK_SHIP_SCHED_FAC"
"T_NOTICE_DET" PRIMARY KEY ("SSFND_ITEM_NOT_DET_ID") USING INDEX PCTFREE 10 "
"INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1"
" BUFFER_POOL DEFAULT) TABLESPACE "ORDER_DATA01" LOGGING ENABLE "
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ADD CONSTRAINT "SHIP_SCHED_FACT_NO"
"TICE_DE_FK1" FOREIGN KEY ("SSD_SHIP_ITEM_ID") REFERENCES "SHIPPING_SCHEDULE"
"_DETAILS" ("SSD_SHIP_ITEM_ID") ENABLE NOVALIDATE"
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ADD CONSTRAINT "SHIP_SCHED_FACT_NO"
"TICE_DE_FK2" FOREIGN KEY ("SSFN_FAC_NOTICE_ID") REFERENCES "SHIP_SCHED_FACT"
"ORY_NOTICE" ("SSFN_FAC_NOTICE_ID") ENABLE NOVALIDATE"
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ENABLE CONSTRAINT "SHIP_SCHED_FACT"
"_NOTICE_DE_FK1""
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ENABLE CONSTRAINT "SHIP_SCHED_FACT"
"_NOTICE_DE_FK2""
Import terminated successfully with warnings.
I drop the old synonym and re-create it but still it gives the same error...Since you are on 10g did you try flashback table feature - http://tonguc.wordpress.com/2007/01/01/oracle-10g-flashback-versions-query-drop-table-and-recyclebin-management/
FLASHBACK TABLE <tabname> TO BEFORE DROP;
If you didnt use purge option, the dropped object is on your recyclebin - http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9018.htm#sthref9593
Best regards. -
Has anyone else seen ORA-00980 synonym errors when using XMLConcat?
Hi,
Using 10.2.0.2 ( as shown by select * from v$instance), I get an ORA-00980 "Synonym translation is no longer valid" message.
This occurs for any attempt to use XMLConcat, for a simple example:
SELECT XMLConcat(XMLElement("first", 'Steve'),
XMLElement("last", 'Jones'))
AS "RESULT"
FROM dual;
I'm guessing that there is/was a problem with an upgrade since I've found a few vague references to a bug fixed in 9.2 that seems to point in that direction.
Our DBA team is looking into it, but it would be interesting to hear if other developers hit the same problem and if there was a relatively easy fix.
Thanks!SQL> conn / as sysdba
SQL> @catnoqm
SQL> @catqmTry to fix it first though manually. The upgrade probably went wrong somehow...
On the FAQ on this forum Mark states:
XML DB FAQ
How do I uninstall XML DB ? How do I re-install XML DB ?
Posted: Sep 11, 2006 10:28 PM mdrake in response to: mdrake
To uninstall XML DB run the sql script $ORACLE_HOME/rdbms/admin/catnoqm.
Note that running this script will
1. DELETE ALL INFORMATION STORED IN THE ORACLE XML DB REPOSITORY AND XDB DATABASE SCHEMA
2. PERMANENTLY INVALIDATE ANY XMLTYPE TABLES OR COLUMNS THAT ARE ASSOCIATED WITH A REGISTERED XML SCHEMA.
IF THE XDB USER IS DROPPED THERE IS NO WAY TO RECOVER THE DATA IN THESE XMLTYPE TABLES OR COLUMNS.
Please do not uninstall XML DB in a production database without explicit instructions from Oracle Support to do so.
To re-install XDB, after running catnoqm.sql, stop and restart the instance and then run catqm as described in the previous post. Backup your database first via RMAN...
Edited by: Marco Gralike on Feb 13, 2009 8:11 PM -
ORA-00980 error when clicking schema's and synonyms tab.
We just moved our DEV database to a 64bit box and now when going into OEM and clicking on any of the schema's we get ORA-00980 synonym translation is no longer valid. Clicking Ok will get us through but then clicking on synonyms tab we get the same error and no information is in the right frame. SQL plus and Toad are working fine connecting to the same database.
Provide Details:
- Database Target Version / Plattform
- OMS Version / Plattform
- Agent Version
Regards,
Martin -
SQL Developer BUG - ORA-00980 Synonym Translation No Longer Valid
We have a read only database of our Production and when I try to access any data using the SQL Developer, I'm getting the following Error.
Error at Command Line:1 Column:14
Error report:
SQL Error: ORA-00980: synonym translation is no longer valid
If I access the same from SQL Plus, Toad or SQL Station, It works fine. Seems some error in SQL Developer.
Any one with Ideas or suggestions.we have DB cloned from Prod everynight and is available for us on readonly access. No read /write privs to any user including DBA.
I think the DB is opened with ALTER DATABASE OPEN READ ONLY;
Also to mention, all the tables in the db can be accessible only by read only user who was given select permission on synonyms.
--VB -
Ora-00980 creating mv over db link
Hi,
I need some help traking down a pesky ora-00980 syn tranlation no longer valid. Here is my situation. I have a view foo
created in schema A that access data over a db link defined in schema A. User A can access data just fine. User A has granted select on the view to user B. User B can select data from the view just fine.
select * from a.foo ;
...lots of data
User B sees data...no synonym is involved.
Now user B tries to create a mv
create materialized view bar as select * from a.foo;
throws ora-00980
User A can create the same MV just fine.
Any suggestions? 10.2.0.4.0
SteveHi,
I suppose you are getting a below problem.
If you have a table in schema A of remote database.
Synonym exist in schema B of local database.
Synonym or when you try to exist this synonym from any other schema or database through pl/sql you would get ora-980 (ie. third level resolution is not possible through PL/sql).
Am not sure whether this would hold true for materialized view or not.
As a test case,
Create a synonym in schema B pointing directly to schema A of remote database (instead of via schema A of local database). Now try to create a materialized view.
But before that make sure schema B has a direct access to synonym of A (without any roles)
Regards
Anurag Tibrewal. -
Hi,
A simple question : is it possible to create a form based on a synonym? (public, private, no matter)?
Suppose I want to deploy an application within a schema where all the synonyms (with the same names) are pointing to the real schema.
Also, something is telling me that it is not possible because when I create a form region based on table, the lov is only presenting the "real" tables and views.
The last question, if not possible, why isn't it? Many customers are using FORMS with this architecture, it will be a step more to bring them to APEX.
Thank a lot, Bruno-PierreDo you suggest anything to get around this? As I mentionned, many customers use the generic schema with synonyms approach so we'll have to be creative!
I could create in the generic schema all the views used by the application (the synonym list). A lot of inconvenients but working...
Bruno-Pierre -
BR error BR0301W SQL error -980 at location BrDbfInfoGet-33 , ORA-00980
Hi <br/>
i get this error by all kind backup and by checkdb, verify db<br/>
<br/>
Oracle 10.2.0.4, RHEL 4 32bit, <br/>
Netweaver 2004s (7)<br/>
<br/>
I have one Oracle NW7 for Netweaver PI (NW7) and Portal (EP7)<br/>
<br/>
<br/>
<br/>
BR0051I BRBACKUP 7.00 (18)<br/>
BR0055I Start of database backup: bedxcwak.afd 2010-08-15 12.21.54<br/>
BR0477I Oracle pfile /oracle/NW7/102_32/dbs/initNW7.ora created from spfile /oracle/NW7/102_32/dbs/spfileNW7.ora<br/>
<br/>
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR9DB.SDBAH<br/>
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR9DB.SDBAD<br/>
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR9DB.MLICHECK<br/>
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR9DB.SAPLIKEY<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.55<br/>
BR0301W SQL error -980 at location BrbDbLogOpen-5, SQL statement:<br/>
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20100815122154', 'afd', 'NW7', ' ', '9999', ' ', 'bedxcwak', ' ')'<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0324W Insertion of database log header failed<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301W SQL error -980 at location BrDbfInfoGet-32, SQL statement:<br/>
'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20090711000000''<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301W SQL error -980 at location BrDbfInfoGet-33, SQL statement:<br/>
'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20090711000000''<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301E SQL error -980 at location BrComprDurGet-1, SQL statement:<br/>
'OPEN curs_6 CURSOR FOR'<br/>
'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DUS' OR FUNCT = 'DUM') ORDER BY FUNCT'<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0314E Collection of information on database files failed<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301W SQL error -980 at location BrbDbLogOpen-5, SQL statement:<br/>
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20100815122154', 'afd', 'NW7', ' ', '9999', ' ', 'bedxcwak', ' ')'
ORA-00980: synonym translation is no longer valid<br/>
BR0324W Insertion of database log header failed<br/>
<br/>
BR0056I End of database backup: bedxcwak.afd 2010-08-15 12.21.56<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0054I BRBACKUP terminated with errors<br/>
<br/>
###############################################################################<br/>
<br/>
<br/>
Please help<br/>
<br/>
BR <br/>
Dawid<br/>after aply this Snote i get this by trying backup my DB <b/>
Job log
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID GLOMBDAW)
Execute logical command BRBACKUP On host nw2004s
Parameters:-u / -jid ALL__20100815175009 -c force -t online -m all -p initNW7.sap
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bedxdzeb.and 2010-08-15 17.50.13
BR0280I BRBACKUP time stamp: 2010-08-15 17.50.13
BR0301E SQL error -942 at location BrDbConnect-4,SQL statement:
'SELECT NAME, NVL(RESETLOGS_CHANGE#, 0), NVL(TO_NUMBER(TO_CHAR(RESETLOGS_TIME, 'YYYYMMDDHH24MISS')), 0), NVL(TO_NUMBER(TO_CHAR(C
ORA-00942: table or view does not exist
BR0310E Connect to database instance NW7 failed
BR0280I BRBACKUP time stamp: 2010-08-15 17.50.13
BR0301E SQL error -942 at location BrDbConnect-4,SQL statement:
'SELECT NAME, NVL(RESETLOGS_CHANGE#, 0), NVL(TO_NUMBER(TO_CHAR(RESETLOGS_TIME, 'YYYYMMDDHH24MISS')), 0), NVL(TO_NUMBER(TO_CHAR(C
ORA-00942: table or view does not exist
BR0310E Connect to database instance NW7 failed
BR0056I End of database backup: bedxdzeb.and 2010-08-15 17.50.13
BR0280I BRBACKUP time stamp: 2010-08-15 17.50.13
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished -
Hi Oracle-experts!
After ValidStruct job I get the following errors:
BR0301E SQL error -980 at location stats_tab_validate-2, SQL statement:
'ANALYZE TABLE "SYS"."STREAMS$_APPLY_SPILL_MSGS_PART" VALIDATE STRUCTURE CASCADE ONLINE'
ORA-00980: synonym translation is no longer valid
BR0893E Validating structure failed for table/cluster SYS.STREAMS$_APPLY_SPILL_MSGS_PART
Can some one help me to solve this error?Hello,
What is your Oracle release?
If you are at 10.2.0.1 then you have to upgrade to the latest 10.2.0.4, if you are already in the correct release then follow the note
provided in the previous post.
Regards,
Yoganand.V -
If you see ORA-00980 during RPM 13.1.6 install
While upgrading from 13.1.5.1 to 13.1.6 the compile invlaid object step of the rpm install failed.
The cause was in invalid package RECLASS_SQL.
The error that was being shown in the compile of RECLASS_SQL was ORA-00980
The reason for the error was a bad synonym obj_rcls_cost_event_rec.
When I looked at the source for the synonym it was pointing at SYS instead of RMS13 schema
I rebuild the Synonym and all was good.
Hope this helps someone else.
Edited by: user9083531 on Sep 29, 2012 9:16 AMWhile upgrading from 13.1.5.1 to 13.1.6 the compile invlaid object step of the rpm install failed.
The cause was in invalid package RECLASS_SQL.
The error that was being shown in the compile of RECLASS_SQL was ORA-00980
The reason for the error was a bad synonym obj_rcls_cost_event_rec.
When I looked at the source for the synonym it was pointing at SYS instead of RMS13 schema
I rebuild the Synonym and all was good.
Hope this helps someone else.
Edited by: user9083531 on Sep 29, 2012 9:16 AM -
FRM-40735:PRE-FORM trigger raised unhandled expception ORA-06508-SATYAM
Hi,
This is Sateesh, presently working on Designer migration project from Designer 2000 V1.3.2 to Designer 10g with headstart.I successfully completed the migration of repository from 1.3.2 to 6i and also migrated the headstart to 6i using simple upgrade method.After this i successfully migrated the repository from 6i to 10g and I compiled all the libraries using forms10g and then i generated all the 10g forms through designer.then 10g forms and libraries are deployed in Oracle Application Server and then we are trying to access the application then we are getting the messsage for most of the forms, i.e FRM-40735:PRE-FORM trigger raised unhandled expception ORA-06508. Can you please help me out in this regard.
Regards
K.Sateesh KumarYes,
that's right. FRM-40735 is a generic error message generated in case of form failure.
This may be as a result of failure while calling sub-programs in a form or any other problem.
For my case I had a call to a built in Package for which the user didnt have the privileges to execute that package.
So how did I find out?
EXCEPTION
WHEN OTHERS THEN
MESSAGE('SQLERRM: ' || SQLERRM);
exception handling does the trick. I got the real error that was causing the problem.
Error was: SQLERRM: xxx package does not exist. This made me think in the lines of either privileges or synonym problem. I found out that the user in the db doent have the execution privileges.
GRANT ALL ON xxxpackage TO xxxuser;
This is a nice forum. I love it and thanks to everyone. -
Invalid synonym translation error
Hi,
I'm runnng Oracle 11.1.0.6 and I get the alert below on and intermittent basis:
ORA 600 [kzxccparentread-8] [kzxccparentread-8] [980] [ORA-00980: synonym translation is no longer valid ] [] [] [] [] []
Should I drop all "dangling" synonyms?You can use the following SQL to identify invalid synonyms.
select owner,object_name from dba_objects where object_type = 'SYNONYM' and status = 'INVALID' and owner not in ('SYS','SYSTEM');
You can use thie statement to make the script to create drop synonym.
Regards -
hi,
i m working on oracle 9i.i am having prob
ora-00980 synonym translation is no longer valid.
how to resolve it ?i m getting this kind of example every where but no one providing what to do neaxt ?
ORA-00980: synonym translation is no longer valid
SQL>create table release as select * from tab;
Table created.
SQL> create synonym s_release for release;
Synonym created.
SQL> select * from s_release;
TNAME TABTYPE CLUSTERID
ATT TABLE
BONUS TABLE
CAR TABLE
DEPT TABLE
DUMMY TABLE
EMP TABLE
PLAN_TABLE TABLE
RELEASE TABLE
SALGRADE TABLE
TWIST TABLE
10 rows selected.
SQL> drop table release;
Table dropped.
SQL> select * from s_release;
select * from s_release
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Maybe you are looking for
-
How come my Deskjet 3050 wont print wirelessly?
Alright so here's the problem. First of all I just bought a Deskjet 3050 All-In-One J610 Series printer on ebay. It came today and I tried to set it up wirelessly and through the USB. It works fine with the the laptop (we use it as a home computer) i
-
I am using the reports 6i and running it on web in excel format and pdf format. I want to highlight a particular row with some color based on some condition on of the column how do i do this, pls help me Vinod
-
My iphone 4s is locked it shows connect to itunes
my iphone 4s is locked it shows connect to itunes what do i need to do without needing a restone n.b:i have itunes version 11.0.1.12 pleease help
-
I was excited to take my new Ipad mini on a trip...but...
My pictures look GREAT for the most part on the ipad but when I had them (many of them) processed, they are terrible. The colors are off and they are grainy. Does anyone else have this problem? There were some beautiful photos, taken in Portugal, b
-
Cost in explain plan vs elapsed time
hi gurus, i have two tables with identical data volume(same database/schema/tablespace) and the only difference between these two is, one partitioned on a date filed. statistics are up to date. same query is executed against both tables, no partition