Form Requirements ?

Hi, I have created a Travel Expense form using LiveCycle Designer 7.0. Currently we have Acrobat Standard 6.0 and when you try to open this form (the one I created using 7.0) up it prompts user saying that you need to update to newer version in order to have the form working/view properly. And it automatically updated Acrobat Reader and not Acrobat Standard. With viewer it works fine but I want my users to have SAVE future available. So, my question is now if we update our 6.0 Standard to 7.0 will that allow user to Save this form?
Thanks,
AP

This is a frequently asked question. There are many people that have already asked the same question. If you do a search in this forum with keywords: save form, reader extension server...,you will find many similar questions that had already been answered.
The answer is "no". Even if you update your Acrobat Standard from 6 to 7, your users (who only have Reader) will not able to save the form with data. Unless they have Acrobat Standard/Prof "or" the PDF is "right enabled" by using LiveCycle Reader Extension Server.

Similar Messages

Wrong warning? to open with Reader (9.3.x or higher) "This PDF form requires a newer version of ..."

Hello
I have a problem with my form, when opened with Adobe Reader Version 9.3.0.148 (included) or higher Reader systematically shows the annoying message "This PDF form requires a newer version of Adobe Reader ...".
I work with 3 versions of each form:
1) Dynamic PDF Form XDP: Generated with Adobe Designer ES 8.2, (target version "Acrobat and Adobe Reader 8.0 or later. "
XDP form has no "Warings"
XFA-Template:
2) PDF Form, generated from the XDP form of point 1), using Adobe LC Forms ES2 "renderXDPForm" method.
3) Flatten PDF, generated from the PDF form, resulting in point 2) value, using Adobe LC Assembler ES2.
DDX:
I have generated 3 different PDF rendering, changing only the "target version":
a.1 PDFFormRenderSpec.setAcrobatVersion (AcrobatVersion.Acrobat_6): MyForm-ES-AcroVersion6.pdf.
b.1 PDFFormRenderSpec.setAcrobatVersion (AcrobatVersion.Acrobat_7_0_5): MyForm-ES-AcroVersion7.pdf
c.1 PDFFormRenderSpec.setAcrobatVersion (AcrobatVersion.Acrobat_8): MyForm-ES-AcroVersion8.pdf
Of all that I've created a flat version using Assembler:
a.2: MyForm-ES-AcroVersion6-flatten.pdf
b.2: MyForm-ES-AcroVersion7-flatten.pdf
c.2: MyForm-ES-AcroVersion8-flatten.pdf
Attach all forms of work[zip 4 download].
Well ... I tried to open all forms generated (six) with versions of Adobe Reader from 8.1.0 to 10.0.1.434 X and the findings are that the annoying warning message is displayed only with the flattened forms and from version 9.3 .0.148 (included) or higher.
Table of test, where
OK= No message at open.
Err= Message displayed.
I do not understand or just logical that the most current versions (and higher) Reader is precisely this message to appear at what may be due? What's happening?
Why the message is taught only in the flattened forms?
How I can solve this problem?
Thanks.

I do not use the method "renderPDFForm" (at least not explicitly), instead use the "renderXDPForm (...)".
I added the XDP form the zip (I forgot): download from here!
And the only parameter that you can tell this method over the "target" of the resulting PDF is "com.adobe.idp.services.PDFFormRenderSpec. "
/* Common to all generated PDF */
com.adobe.idp.services.PDFFormRenderSpec renderSpec= new com.adobe.idp.services.PDFFormRenderSpec();
renderSpec.setLinearizedPDF(true);
renderSpec.setLocale("es_ES");
renderSpec.setRenderAtClient(RenderAtClient.No);
renderSpec.setCacheEnabled(false);
renderSpec.setStandAlone(true);
/* Target version 8 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion8.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_8);
/* Target version 7.0.5 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion7.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_7_0_5);
/* Target version 6 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion6.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_6);
After this, process PDF forms resulting in Assembler.
I tried also NO explicitly assign the "AcroVersion" ... and in such cases, the resulting AcroVersion indicated corresponds to the time of design (Adobe Designer, File / Form Properties / Default / Target Version), and in such cases the resulting PDF, also displays the warning message.
I do not know if I answered your question.
Any idea?

PDF Form Requires a newer version of Adobe Reader

New at this...Created my form in Live Cycle 8.0/Professional 8. Throughout company we are using Acrobat Reader 7.0 and are not at this time looking to upgrade. When our users open this form, get "This PDF form requires a newer version of Adobe Reader..." and prompts them to upgrade. Is there anyway I can get rid of this message...a way to make my form know that users will be opening in 7.0 and accept without error?
Also, I'm not able to get the Submit to Email button to work...getting "This operation is not permitted"...how can I fix?
Funny thing is I had been able to get the e-mail button to work at one time, but now, all of the sudden, it doesn't want to work...even on my machine which has Live Cycle/Professional 8 loaded?????
Thanks!

Geo,
Thanks for the quick response. Tried and received: "This PDF document contains an Adobe XML form. Such files cannot be optimized.
Help...thanks again

This PDF form requires a newer version of Adobe reader !?

Hi there
I use LiveCycle 8 and I design forms for a target audience using Acrobat Reader 7..
My problem is whatever I put in a form, I get a really annoying message when opened in Acrobat reader 7
This PDF form requires a newer version of Adobe reader, Without a newer version, the form may be displayed but not work properly etc....
This doesn't inspire confidence for the user.
I get this message even if I open a new form, add a single textfield and save as Acrobat 7 PDF form.
Is there a way around this ?
Thanks
Chris

I am not too sure, I thought that saving as Acrobat 7 pdf,would do that. Is that not the case ? Are you referring to something else ?
Thanks
Chris

How to make Buyer and Planner fields in Master Items Form Required without

How to make Buyer and Planner fields in Master Items Form Required without using personalization?
1) Steps to Reproduce
Under Application Developer Common Modules responsibility,
1) Query Region MTL_SYSTEM_ITEMS
2) Click on Region Items
3) Add Buyer Id and Planner Code attributes with Required checkbox checked.
4) Bounce iAS server and JVM and clear java cache
5) Changes not taking effect
Current Application Release: 11.5.10.2 (3460000)
Current INV Rollup: INV.J RUP22 (9878808)
Current WMS Rollup: WMS RUP19 (9951502)
Product Installation List :
Product Installation: 11i.BOM.J: Installed
Product Installation: 11i.EGO.E: Installed
Product Installation: 11i.ENG.I: Installed
Product Installation: 11i.INV.J: Installed
Product Installation: 11i.PO.I: Installed
Product Installation: 11i.WMS.G: Installed
client needs to make the Buyer and Planner fields under Inventory->master Items form to be required.
He tried using the Application Developer Common Modules responsibility, to find the Master Items Region and added the Buyer Id and Planner Code attributes with the Required check-box set to Yes. He bounced the iAS server and cleared java cache, but the changes do not take effect.
client does not want to use form personalization.
Can you please provide more assistance for using Application Developer Common Modules responsibility?
Edited by: jemar98 on Aug 9, 2011 1:44 PM

A forms developer could make those fields required with a CUSTOM.pll extension if you didn't want to use forms personalization. Both are considered customizations to standard functionality and may or may not require rework after patching or upgrades.

How to make a column in a tabular form required?

How to make a column in a tabular form required ?

the column name is test_id , and the debug report is :
0.00000
0.00000
...NLS: Set Decimal separator="."
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
Metadata: Fetch application definition and shortcuts
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=ar-eg
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
alter session set nls_language="EGYPTIAN"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
alter session set nls_territory="EGYPT"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
NLS: CSV charset=AR8MSWIN1256
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.01500
A C C E P T: Request="CREATE"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
...NLS: Set NLS Group separator=","
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
...NLS: Set g_nls_date_format="DD/MM/RR"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
...NLS: Set g_nls_timestamp_format="DD/MM/RR HH12:MI:SSXFF PM"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
...NLS: Set g_nls_timestamp_tz_format="DD/MM/RR HH12:MI:SSXFF PM TZR"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
...Setting session time_zone to +02:00
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.00000
0.00000
...metadata, fetch translated app info
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...fetch session state from database
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
fetch items
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...fetched 14 session state items
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Check session 8341322256175063 owner
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Check for session expiration:
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Metadata: Fetch Page, Computation, Process, and Branch
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Session: Fetch session header information
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...metadata, fetch page info
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Validate item page affinity.
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Validate hidden_protected items.
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Check authorization security schemes
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Initialize tabular form column mapping
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Session State: Save form items and p_arg_values
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Save "P38_CLIENT_ID" - saving same value: ""
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Saved Item "P38_CLIENT_NAME" New Value="asdf"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Saved Item "P38_AGE" New Value="23"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Saved Item "P38_SEX" New Value="ذكر"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Saved Item "P38_PHONE" New Value="23"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Save "P38_EMAIL" - saving same value: ""
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Saved Item "P38_DOC_NAME" New Value="adsf"
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Save "P38_NOTES" - saving same value: ""
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Save "P38_CLIENT_ID_NEXT" - saving same value: ""
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Save "P38_CLIENT_ID_PREV" - saving same value: ""
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Session State: Save "P38_CLIENT_ID_COUNT" - saving same value: ""
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Processing point: On Submit Before Computation
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Branch point: Before Computation
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Computation point: After Submit
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Tabs: Perform Branching for Tab Requests
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Branch point: Before Validation
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Validations:
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
Perform basic and predefined validations:
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Validate is not null for P38_CLIENT_NAME
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.00000
...Validate is not null for P38_AGE
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.01500
0.01600
...Validate is not null for P38_PHONE
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.03100
0.00000
...Validate is not null for P38_DOC_NAME
4
http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2http://127.0.0.1:8080/apex/f?p=4000:939:8341322256175063::NO:939:P939_PAGE_VIEW_ID:2
0.03100
0.00000
Perform custom validations:

Designer form prompts Reader X error:"This PDF form requires a newer version of Adobe Reader"

I have a PDF form that was created using LiveCycle Designer ES 8.2. PDF version 1.6, so it's good for Reader 7.x and above.
When someone using Adobe Reader X tries to open the form, they get this javascript error message:
"This PDF form requires a newer version of Adobe Reader. Without a newer version, the form may be displayed, but it might not work properly. Some form elements might not be visible at all. In an internet connection is available, clicking OK will download and install the latest version."
Is there anything I can do to the form that would make this error message go away? Is this a know issue with Adobe Reader X or Designer?

Is there any code running on the form?
Reader X has come out with additional security features that must be disabled to get any PDF form w/code to work.
Open Adobe Reader X --> click on Edit --> Preferences. Under the General Category, uncheck "Enable Protected Mode at startup" (last checkbox in the dialog box). Click OK and try to open your form.

Form required to create templates checks

Form required to create templates checks
To enable the user to create a template of the check that he wants
Such as the shape of the check and who item found on the check
Costume dates and the beneficiary and the name of the bank and check number, and so on
With the possibility that the user can move this Alaeetm to create a form that suits him
Does anybody help me and give me ideas

Sounds like the American spelling of Cheque ? But then if that is true it would require a Report too ... ?

Failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent. Email Notification Component Properties works fine.

I know there are a few other questions like this but I can't seem to find how it's relating to my issue. I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
in the reports feature of sccm.
I just picked a sample report Compliance 4. I right clicked hit create subscription and input my email into the TO: field. When it runs i get the above error. I checked the email notifcation under configure site components and was able
to successfully send a test message from there but I dont get why it doesnt work on the subscription.
Any Ideas?

The log is pretty big so im not sure where I can upload it. I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here. Let me know some place I can send you the full log file
or if you want a different log.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
at System.Net.Mail.MailAddress.ParseValue(String address)
at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed. Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0

SAP Cloud SDK : Create Quick or List Modification form require in Embed Component

Hi Experts,
I need requirement to create the quick create or List Modification in embed component.
I have already make button for "Quick Activity" but i need quick create or List Modification from.
I have also try using the following blog.
How to create a List Modification Form?
I have follow the steps.
1) Go to embed component select the "DataModel" and select "DataList" right click on it and select "Add List Modification Structure".
2) Now from the right side selected BOModel Drag and Drop the element you want to display in the Form and bind correctly.
3) Now go to Designer tab and from the "Toolbar" double click on "ListModficationForm" from the Panes.
4) Once the ListModificationForm open in designer open the BO browser and select the Data Model tab.
5) Drag and Drop the element from the newly created "List Modification Structure" in previous steps and under the property window under the "Associated List Modification Structure" select the created List modification structure from the Root.
6) Now create event handler to call this form and under the event add operation "ListModification" and select the operation "Start" and under the List Modification Structure select the created structure from Root.
7) I have assign this event in Add button OnClick Property when i activate and Test it. i getting dump.
Please suggest me in the above steps i have mentioned any step missing or any steps i have do the wrong configuration.
I have create the Custom business object with "Object Based Screen" ( QA, QIF, QWL , PTP,WCF, WCView.
so i try using Quick Create QC using creation of screen but i dont know what the configuration require to call QC from embed component.
Please suggest me if anyone have idea about this 2 solutions.
Many Thanks,
Mithun

Hi Horst,
well, it was just an experiment to test the list modification after the blog entry was published.
So I did not test it extensively.
However, to answer your question:
I did manage to add two items to a list using the Browser, without any perceived anomalies (no dumps or such).
But that's where I stopped experimenting with this feature.
Best regards,
Ludger

Oracle Forms requires JRE 1.4.2_06, how do I uninstill newer versions

Hi, The Oracle Forms that we use require JRE 1.4.2_06, they will not run in the most recent version of the JRE. How am I supposed to uninstall the newer versions? I went into the control panel and uninstalled them through there and rebooted, but the directories still exist, the entries in the registry still exist and the version reported in the console is still 1.6.0_05. What else do I need to do?

I sorted this out myself.
Downloaded the latest stable xerces binary (2.5.0) from http://xml.apache.org/dist/xerces-j/
Then I extracted xercesImpl.jar and put it under:
%ORACLE_HOME%\LIB\endorsed
I had to create the endorsed folder as it didn't exist.
Then, when invoking Saxon using java.exe, I added the following switch:
-Djava.endorsed.dirs=%ORACLE_HOME%\LIB\endorsed
That's it.
You can find some background info on:
https://jaxp.dev.java.net/Updating.html
Bye,
Flavio

Form requires a newer version?

Hi everybody,
i use NWDS 7.2 SP 3 with Adobe Professional 9 (includes Designer 9).
When i start the Designer from my WD4J Context (Menu of the Interactive Forms UI) i get always the message:
The form you are trying to open requires a newer version of this product.
If you open the from, some of the elements may appear but not work properly.
Saving the form may lose some of its data.
But NWDS 7.2 should work with Designer 9, or?
regards,
Sid
Edited by: Sid on Dec 12, 2010 3:35 PM

Hi Rams,
when you say they cant open the form when its received I assume the below.
an PDF is sent to a user via mail.
when they open the attachment they see a blank grey color screen nothing else if so.
try the below settings on the reader.
Open Adobe reader>edit>preferences.
at the ned of this screen you will find a checkbox: enable protectedmode at start up.
Now if this checkbox is un checked, you can view the pdfs locally, having it unchecked if you try to pdf preview in ADLC it fails.
and the vice versa.
Hope this helps you, if it doesn't resolve you need to check with It team or the Adobe guys for this.
But I faced the issue and this is what the resolution we got froom our IT desk.
Cheers,
Sai

C Form Requirement

What is the available provision of C Form in SD .
My requirement is our project is
All those customers who are eligible for availing concessional CST submit C form either before the supply or after. C forms are valid for the quarterly period of calendar year (Jan to March, April to June, July to Sept & Oct to Dec). C form applicability is linked to the date of invoice.
a. When C forms are required to be submitted in advance: The details of C form will be entered while processing sales order While processing sales order, incase C form is applicable, system should check for availability of form. If C form details are available, delivery order should be processed. Else, the delivery should be put on block.
b. C forms can be submitted at the end of quarter: Some customers are given special approval for submitting the c-forms after the end of each quarter. For such customers, system should allow a grace period of one month from the quarter ending date. In this case, for the current quarter, system should allow creation of sales order, delivery order etc., in the absence of C form submission details. The same should continue for a month into the next quarter. After that, if C form details are not available, sales order/delivery order should be put on block. Eg: A customer who has not submitted C form for the quartet Jan u2013 March should not get supplies from 1st May.
Reports:
Open invoice details i.e., invoice no (commercial / excise), date & invoice amount, quarter-wise and customer-wise for each of the plants.
Is this process available in standard system in SD module to control C u2013 Form tracking.
As far as I know SAP has provided only 1 standard report for C u2013Form Transaction code: J1IUN - Forms tracking
Thanks.

without using a Z....??
I dont think this is possible without the help of ABAPer
thanks
G. Lakshmipathi

PHP Form - Required Fields

I've got my form working great thanks to Joe and David (and
others) in
this group.
I want to take it a step further by requiring three fields to
be filled
out. So I found this code to use in my thankyou2.php page:
if (!($frmName && $frmemail && $frmphone))
{echo "You must complete the
form to send it"; } else {
I *thought* that if I used it prior to the code that
processes the rest
of the page, and sends the admin e-mail, all would be swell.
However,
all I get is a blank page.
I'm almost thinking now that maybe the code needs to go on my
contact.php page rather than the thankyou.php page? That way,
the error
message could appear right on the contact page itself?
I'm fairly new to this PHP stuff, so go easy
www.paramount-const.com/contact.txt
www.paramount-const.com/thankyou2.txt
Dave

sorry:
header('Location:thankyoupage.php'.?name=$_POST['name']);
should read:
header('Location:thankyoupage.php?name='.$_POST['name']);
i misplaced the dot and quote...
(_seb_) wrote:
> Dave Anderson wrote:
>
>> Shane H wrote:
>>
>>>
http://www.geekministry.com/blog_article.php?id=40
>>>
>>> Kim provides an easy way to validate the form
and also a field for
>>> stopping spam (I use it on my website, works
very well!) - all in PHP.
>>>
>>
>>
>> Shane, good catch! Here method is so simple...
>>
>> I installed it, but have a few PHP questions.
>>
>> Source:
>> www.paramount-const.com/html/contact2.txt
>> www.paramount-const.com/html/thankyou2.txt
>>
>> Live form:
>>
http://www.paramount-const.com/html/contact.php
>>
>> 1) Biggest issue:
>> If the form is incorrectly filled out, the error
messages are
>> displayed at the top of the page. I'm not clever
enough to figure out
>> how to display the error message in the fieldset. I
tried putting the
>> php block of code in the fieldset, but it doesn't
seem to matter.
>> Maybe I can position it with CSS? or is there a
different way?
>>
>> 2) Nice to do but not imperative:
>> If the form is filled out properly, it redirects to
my thankyou page.
>> I would like to personalize the thank you if
possible. I know there's
>> a way to customize that page with a name variable,
but I can't get it
>> to work. I think what's happening is that I need to
somehow pass a
>> variable from the contact page to the thankyou page.
I have this at
>> the moment in my thankyou page:
>>
>> <?php echo 'Thank you,
'.htmlentities($_POST['name']).'.'; ?>
>>
>> Thanks.
>>
>> Dave
>
>
> when you click on the submit button of the form,
basically the page
> reloads, this time with all the info from the form, as
$_POST info.
> If all this info is correct, you redirect to the thank
you page.
> You need to pass some of the info to the thank you page
(for example to
> echo the name of the person who just applied).
> SO, when the form is published and the page reloads, you
need to store
> this info, and pass it to the thankyou page.
>
> here's we go, scematically:
>
> <?php
> if [form submitted]...
> $name = [submitted name from form field];
> [if everything in the form is correct and we redirect to
thankyou
> page:]
>
header('Location:thankyoupage.php'.?name=$_POST['name']);
> }
> ?>
>
> Then in thankyou page,
>
> $name = $_GET['name'];
> echo $name;
>
>
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Completed Form requires Asian Language Pack w/ no visible Asian characters

Why do Reader users receive a notification requiring them to install the "Asian Language Pack" after I fill out a form and send it? The form has no visible Asian characters.

Fonts listed under Document Properties of the completed form are: TimesNewRomanPSMT (TrueType) & TimeNewRomanPS-BoldMT(Embedded) TrueType.
I neglected to mention that the original form (incomplete) does not require the Language Pack. What settings/preferences can be changed in Acrobat to prevent Unicode (or other unwanted Fonts) from being used when completing the form?

Re: PHP Form - Required Fields

Change this section of code:
if(!count($Errors)) {
$SendTo = "[email protected]";
$Subject = "New Contact Form";
$FromString = "From: ".$_POST['eaddress']."\r\n";
$Indhold = "Dave, Someone filled out the contact form on the
web site.
Here is the information:\r\n\r\n";
$Indhold .= "name: ".$_POST['name']."\r\n";
$Indhold .= "e-mail: ".$_POST['eaddress']."\r\n";
$Indhold .= "phone: ".$_POST['telefon_nr']."\r\n";
$Indhold .= "subject: ".$_POST['subject']."\r\n\r\n";
$Indhold .=
"comment:\r\n".preg_replace("(\r\n|\r|\n)","\r\n",$_POST['comment'])."\r\n";
$MailSuccess = mail($SendTo,$Subject,$Indhold,$FromString);
header("Location: thankyou2.php");
exit;***************************
To this:
if(!count($Errors)) {
$SendTo = "[email protected]";
$Subject = "New Contact Form";
$FromString = "From: ".$_POST['eaddress']."\r\n";
$Indhold = "Dave, Someone filled out the contact form on the
web site.
Here is the information:\r\n\r\n";
$Indhold .= "name: ".$_POST['name']."\r\n";
$Indhold .= "e-mail: ".$_POST['eaddress']."\r\n";
$Indhold .= "phone: ".$_POST['telefon_nr']."\r\n";
$Indhold .= "subject: ".$_POST['subject']."\r\n\r\n";
$Indhold .=
"comment:\r\n".preg_replace("(\r\n|\r|\n)","\r\n",$_POST['comment'])."\r\n";
$name = [submitted name from form field];
$MailSuccess = mail($SendTo,$Subject,$Indhold,$FromString);
header('Location:thankyoupage.php?name='.$_POST['name']);
exit;***************************
That part of the code that I pasted above it creating those
strings ONLY IF
there are no errors, so you can just add in seb's code there.
HTH, take care.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================

Ah - see now I put the formatting how I'd *like* the user to
input it.
Because I work with anyone in any loaction, naturally the
format would be
different.
For my contact.php page - the "phone" field isn't a
requirement, but for my
quote.php it is a requirement and I just validate it just to
make sure there
is SOMETHING in the text field. Not the best way, but I trust
a true future
client will provide their phone number.
Take care Dave, glad I could be of help.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Dave Anderson" <[email protected]> wrote in
message
news:e68vpc$da9$[email protected]..
> Shane H wrote:
>> Dave -
>>
>> I've tweaked your code and got it working for you.
Here are the pages in
>> text:
>>
>> Source code (contact.php):
>>
http://www.avenuedesigners.com/tests/dave_source.html
>>
>> Source code (thankyoupage.php):
>>
http://www.avenuedesigners.com/tests/dave_thankyou_source.html
>>
>> HTH, take care.
>>
>
>
> Shane,
>
> Many thanks! I took a look at what you did to compare to
what I had. I
> couldn't tell what was different!? Anyhow, it works
GREAT.
>
> I noticed on your site that you have a specific format
for the phone
> number. Would it look something like this?
>
> if(!trim($_POST['phone'])) $Errors[] = "Phone";
>
> change to this:
>
>
if(!preg_match("/[0-9]{2,4}+-[0-9]{2,4}+-[0-9]{3,5}/",$_POST['telefon_nr']))
> $Errors[] = "The phone number is typed wrong. (check the
format)";
>
>
> I tried it and it doesn't seem to care *what* I put in
(alphanumeric). I'm
> sure my code is bad, but I don't know what.
>
> Thanks for your help Shane!
>
> Dave

Form Requirements ?

Similar Messages

Maybe you are looking for