Form Reset Button.. works in Pro., Doesn't in Reader

I created a form in MS Word 2007 and converted to Actobat Pro 9.2.0 and included a reset and print button. 
When opening the document in Reader 8.1.3, the reset button only resets some of the fields, although all of the fields are checkmarked in the reset dialog.  Also, when I click the print button, nothing happens.  I've created dozens of Acrobat forms with reset and print buttons and this is the first time I've noticed that they aren't working in Reader.
Both functions work fine in Pro.  Yes, I am sure that the button behavior is linked to a specific action such as >File>Print for the Print Button.  This happens on more than one computer, so I don't think the problem lies with just my machine.
Any ideas?

As a test, what happens if you replace the Reset Form action with the following JavaScript?
// Reset all form fields
resetForm();

Similar Messages

  • After Yosemite install, sound button on MacBook Pro doesn't work-stuck at full volume or Mute. Can't adjust slider in preferences, or use volume button on keyboard.

    Just installed Yosemite on my MacBook Pro 15", Retina display, early 2013 build. After installation, I cannot adjust volume for speakers. It is either completely off (muted) or on a FULL VOLUME. Neither the speaker volume buttons on the keyboard or the Sound Output slider on the Systems Preferences works. The slider does not move from full volume and the speaker buttons do nothing. This is just awful--can't get any sound except at full volume which is ear-splitting.

    Talked to Apple Support. The support person took a bit, but figured out that Yosemite changes the sound output default to the installed HDMI display speakers--and the Mac does not control those speakers. This recurs every time there's a restart. The Solution is to go to System Prefs>Sound and change the OUTPUT device to the Internal Speakers on the Mac. Then sound controls work perfectly. This has to be done every time the system restarts, at least until Apple sends out a fix for this bug.
    If you have an external device attached with speakers, apparently the Mac wants to make that default output device. Note that in my system on the list of output devices, the Internal Speakers are the first in the list...that generally is the "default" output device--but Yosemite doesn't recognize that and makes the HDMI device default output.
    Not perfect, but now that I know the fix, I can live with it until there's a permanent fix from Apple.

  • Submit button missing from form, can see it in Pro but not in Reader XI

    I've created and disributed forms in the past with no problem, however, when I open up my form in Reader XI, the submit button is missing.  In the purple ribbon, it instructs people to click the submit button once the form is complete but there is no button showing.  Help! 

    What does this command say:
    ls -ldaeO@ Documents
    If it has 'hidden' attached to it, then look at the "man chflags" command.
    chflags nohidden Documents

  • How come iMac works & Mac Pro doesn't - with Pegasus R4/6?

    How come my iMac worked with my Pegasus R4 and R6 hard drives and my New Mac Pro does not?  I have disk mounting issues when my Mac Pro goes to sleep.  It also shuts down in the middle of editing with Final Cut Pro X.  When opening Final Cut Pro X after I return to work, I have to reboot the Pegasus drives for the to be recognized by the Mac Pro.

    Wow... Lots and lots of data.  Unfortunately, the problem occurred some time in the night when I was off work.  The other thing is, I don't know what the heck I am looking at.

  • Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

    Hai ,
        i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
    "C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
    if pressed ok . aplication get closed
    i reinstalled all aplication with old versions but sill have the same error .please give  a solution . thank you.

    thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
    Also, this is only for regular PDF files, not forms.

  • PDF Form with a reset button

    I designed an interactive pdf form for a company with a reset button. If someone fills it out then sends it to someone, what's stopping the receipient from hitting the reset button and erasing the info the person sent them.

    If you don't want the end user to be able to reset the form at all, you can set up the form so that the user who populates the form before sending it to the recipient sets the default value of the fields equal to the field value, sets the fields to read-only, and removes the reset button. The recipient won't be able to clear the form at all or interact with the fields. They could also flatten the form, which converts the fields to regular page contents, so there are no longer fields present that can be reset. You would also want to remove the Reset button so that it doesn't appear on the page. This can all be done through a script, but Reader is not able to flatten fields.
    If you need specifics, post again.

  • MS-7258 (PT890 Neo-V) reset button not working

    Just a quickie. I think this is my motherboard type thing. I've noticed my reset button on my PC doesn't seem to work and I wonder if you buffs out there know if there's something in the BIOS to re-enable it?

    open the case and ensure that reset button is connected property to the mainboard.

  • MSI P67A-GD65 (B3) Power and Reset button wont work.

    Right..i just bought this mobo.. Build the PC..Everything works fine...since i can open the pc from the button on the mobo..thing is:
    The leds and HDD light work perfectly fine..
    Power On/Off wont work
    Reset wont work.
    The cables are connected properly
    Power SW:Orange (Positive) at 6.. Negative at 8...
    Reset SW:Blue (Positive) at 7.. Negative at 5.
    Power LED and HDD Led work fine..
    They just wont work.. Should i RMA the card or is it something else i am missing?
    Obviously i checked the buttons themselves..removed the front panel..nothing seems weird..
    The buttons worked perfectly fine ~1 hour before i went to get the new stuff ;p

    Does the reset button work?  Have you tried using a screwdriver to short the pins?  It may be the case and not the MOBO.  Also, try reversing the connectors.
    First image is of the reset switch on the MOBO.
    The second image is of the pin layout.

  • MOVED: MS-7258 (PT890 Neo-V) reset button not working

    This topic has been moved to Intel P4 & Celeron P4 based board.
    https://forum-en.msi.com/index.php?topic=109967.0

    open the case and ensure that reset button is connected property to the mainboard.

  • ID CS6 Form Submit not working in Adobe Reader

    Hardware = Mac 8Core OSX 10.7.5 | Software = InDesign CS6 vs 8.01
    I'm having ongoing frustrations with the ID Cs6 Forms. The interactive form Submit button works on my machine's Adobe Acrobat Pro, but not on machines using Adobe Reader (I've given up on it working in Apple Preview). It has worked on one other mac machine, again it was Adobe Acrobat pro 9.1.1. Any advice will be appreciated. Thanks in advance: Justin

    You need to enable that in Acrobat Pro.
    Bob

  • OBIEE 11g Dashboard Prompt Reset Button Functionality

    Dear Experts,
    Can anyone explain what is the exact functionality of 'Reset' Button in any OBIEE 11g Dashboard Prompt.
    If anyone found any documentation related to it... please let me know.
    thanks,
    Varun

    Hi Varun,
    This is the functionality of Reset button,
    Reset will go back to last applied values. It does not clear values. Currently the Reset button works in the following ways:
    if 1) the prompt is blank 2) select some value, 3) reset 4) it should go back to blank.
    if 1) the prompt is blank 2) select some value, 3) apply 4) reset. 5) it should NOT to back to blank. actually it does not change anything.
    if 1) the prompt is blank 2) select some value, 3) apply 4) change any values 5) reset. 6) it should undo any changes in step 4.
    Rgds,
    Dpka

  • How to make buttons work in drop down movieclip in flash???

          I am trying to make an index page with buttons for a photography site.  the entire page is built in flash so far.  My question is that I have created a drop down menu that is a Movieclip with 5 buttons.  I can not seem to assign an external web page to each buttons that are under the movie clip drop down menu.   Is this a possible??   The Movie clip is run by mouse-over the word "studio Gallery" button.  This drops down the 5 gallerbuttons (Portrait, children, wedding, Artistic Babies, etc...).  In Flash 8 Pro I know I can assign an external web page named children on the main page but how do I assign these to the buttons in the drop down once the movieclip is made.  Is this where I need to use folders with extra layers in the folder to make it work??
    In case you can not tell I am new to this and have been teaching my self with "Training from the Source" and also "Visual Quickstart Guide"  so go easy on me  8-)
    Randy

    Ned Murphy,
    Your advise was very helpful as I found the info that was very helpful
    with the google search.   I still have one nagging problem, I get an
    error shown below:
    *Error* Scene=Scene 1, layer=Buttons, frame=1:Line 2: Mouse events are
    permitted only for button instances
         on (rollOver) {
    Other than the difference of onrelease to on (rollOver) I see no reason
    for this error
            The clip works but when the mouse rolls out it does not close
    the dropdown menu I have included the drop down file here also.   I will
    be using this to add the resulting "swf" file to the area on my larger
    fla to get the menues working but I don't want the menu to stay open
    once someone rolls over it if they want to goto an other spot on the page.
    I'm 53 yrs old and can not afford much more Hair pulling I will be bald
    if the little stuff wins....
    Thanks for the help
    Randy
    What you should do is search Google using "AS2 drop down tutorial".  That should produce a few results that you can use to guide you thru the process.
    I cannot tell clearly from your description so far, but it sounds like your movieclip contains the buttons and has a rollover assigned to it.  That rollover will block interaction with the buttons.  So your best bet is to get a hold of a tutorial that will walk you thru the process so that you can get your buttons working the way you want.
    >

  • Exit and Reset Buttons

    Hi i'm trying to make the exit and reset buttons work.
    Everything works exept for these two and I do'nt understand why.
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    public class PuntenInterface extends JFrame implements ActionListener{
        private JPanel panelknop = new JPanel(new GridLayout(4,1));
        private JButton knop1 = new JButton("Punt1");
        private JButton knop2 = new JButton("Punt2");
        private JButton knop3 = new JButton("Punt3");
        private JButton knop4 = new JButton("Teken");
        private JPanel paneltext = new JPanel(new GridLayout(1,4));
        private JTextField textveld1 = new JTextField();
        private JTextField textveld2 = new JTextField();
        private JLabel xcoord = new JLabel("X-Coordinaat: ");
        private JLabel ycoord = new JLabel("  Y-Coordiaat: ");
        private JPanel coordinaten = new JPanel(new GridLayout(4,1));
        private JLabel coordp1 = new JLabel();
        private JLabel coordp2 = new JLabel();
        private JLabel coordp3 = new JLabel();
        private JLabel geef = new JLabel("Geef de coordinaten van de drie punten in:");
        private JPanel quit = new JPanel(new GridLayout(1,3));
        private JButton reset = new JButton("Reset");
        private JButton exit = new JButton("Quit");
        private JPanel tekening = new JPanel();
                   Punt p1 = new Punt(0, 0);
                   Punt p2 = new Punt(0, 0);
                   Punt p3 = new Punt(0, 0);
        public PuntenInterface(){
              setTitle("PuntenInterface");
              setBounds(500,500,800,800);
              Container c = getContentPane();
                    c.setLayout(null);
              panelknop.setBounds(50,30,100,400);
                    c.add(panelknop);
                    panelknop.add(knop1);
                    panelknop.add(knop2);
                    panelknop.add(knop3);
                    panelknop.add(knop4);
                    paneltext.setBounds(160,30,300,30);
                    c.add(paneltext);
                    paneltext.add(xcoord);
                    paneltext.add(textveld1);
                    paneltext.add(ycoord);
                    paneltext.add(textveld2);
                    knop1.addActionListener(this);
                    knop2.addActionListener(this);
                    knop3.addActionListener(this);
                    knop4.addActionListener(this);
                    coordinaten.setBounds(160,80,400,100);
                    c.add(coordinaten);
                    coordinaten.add(geef);
                    coordinaten.add(coordp1);
                    coordinaten.add(coordp2);
                    coordinaten.add(coordp3);
                    quit.setBounds(160,450,200,30);
                    c.add(quit);
                    quit.add(reset);
                    quit.add(exit);
                    tekening.setBounds(160,150,400,400);
                    setVisible(true);
    public void actionPerformed(ActionEvent e){
            int x = 0;
            int y = 0;
            String sx = textveld1.getText();
            if (!sx.equals("")){
                x = Integer.parseInt(sx);
                textveld1.setText("");
            String sy = textveld2.getText();
            if (!sy.equals("")){
                y = Integer.parseInt(sy);
                textveld2.setText("");
            Object source = e.getSource();
            if (source == knop1){
                p1 = new Punt(x,y);
            else if (source == knop2){
                 p2 = new Punt(x,y);
            else if (source == knop3){
                  p3 = new Punt(x,y);
            else if (source == knop4){
                Puntenframe3 pf = new Puntenframe3(p1,p2,p3);
            if (source == knop1){
                int Coordinaat1 = Integer.parseInt(sx);
                int Coordinaat2 = Integer.parseInt(sy);
                coordp1.setText("X-Coordinaat punt 1:  " + Coordinaat1 + " ,Y-Coordinaat punt 1:  " + Coordinaat2);
                else if (source == knop2){
                int Coordinaat3 = Integer.parseInt(sx);
                int Coordinaat4 = Integer.parseInt(sy);
                coordp2.setText("X-Coordinaat punt 2:  " + Coordinaat3 + " ,Y-Coordinaat punt 2:  " + Coordinaat4);
                else if (source == knop3){
                int Coordinaat5 = Integer.parseInt(sx);
                int Coordinaat6 = Integer.parseInt(sy);
                coordp3.setText("X-Coordinaat punt 3:  " + Coordinaat5 + " ,Y-Coordinaat punt 3:  " + Coordinaat6);
            if (source == reset){
            textveld1.setText("");
            textveld2.setText("");
            coordp1.setText("");
            coordp2.setText("");
            coordp3.setText("");
            if (source == exit){
                System.exit(0);
    }Thanks very much

    Take your knop1 button for example. What do you do with that button that you're not doing with your reset button?
    Hint: action listener.

  • Form submit button

    form submit button works on businesscatalyst and in preview, but it is not visible though interactiv on my and my clients server... what use is a perfect tool like Muse if not working correct on all servers? My client is waiting... who can help with this problem?

    Hi,
    If you are experiencing issue on third party host, did you try this troubleshooting guide
    Troubleshooting Muse Form Widgets Used on Third... | Adobe Community
    Do let me know if you have any question.

  • Reset button is broken.  Which pins do I short to reset my Airport Extreme to factory defaults?

    I'm working on a 4th Generation Airport Extreme A1354.  I do not know the password and I was not able to perform the software, hardware, or factory default reset procedures.  (I never got the fast blinking amber light.)
    I suspected a broken reset switch and took the gray cover off to find the reset button was indeed broken.  Upon slight maneuvering, the button fell off the board.
    I think I can perform a factory default reset by jumpering where the reset switch was.  Which pins do I short to perform the factory default procedure without the reset button working?
    Trying to upload pictures that show my issue.

    I don't often work on extreme.. mostly Time Capsule.. but the switch is surface mount.. no pins go through the board.. you will need to lift the board right out of the frame, (it all comes out in one piece and is fairly easy to do).. and you will need to short the two pins right at the switch .. but hopefully with it right out the switch itself will become accessible.

Maybe you are looking for