Form run & DBornetwork conn. down, conn. up form run without restart app.

When form is running and the Database or Network Connection has been down form remain runing in offline mode that has been done but now I have a problem to reconnect that running form without restart my form
is it possible when i am using Oracle Developer 6i with win2k operating system.
Shehzad

Find the answers in one of the other occurences of this question
Frank

Similar Messages

Firefox REFUSES to completely shut down, can never re-open without restart

I updated flash and java. when I close firefox it cannot even be forced to close in task manager. I have win XP mce and this is a major pain since IE is such crap when it comes to security.
When are you going to provide the update that actually FIXES this problem. this started with the NEW and IMPROVED ff-5.
Bring back the old one, I'll take the old and decrepid over this.

Must be the "hang at exit" problem. You already know how to do Step1; now just determine which Add-on (Extension or Plugin) is causing the problem.<br /><br />
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Cortar un video en partes iguales con Adobe Premiere de forma automática.

Me gustaría saber si se puede cortar un video en partes iguales con Adobe Premiere de forma automática. Es decir, un video por ejemplo de 20 segundos, partirlo en pequeños trozos de 1 segundo de forma automática. Gracias

[Moved to Spanish Forum]

Populating a Drop down menu JSP form

How to go about populating a drop-down form from Oracle Database using JSP?
I have the connecting to the Oracle Database running. I also can query forms, but i can't create a drop-down menu form.

Start the dropdown box with the regular select tags "<select name=this>"
Then open a JSP block and get a resutlset, loop through the resultset and and put the values from the resutlset into the <option> tags for the HTML.
Example
out.println("<option value=\"" + rs.getString(1) + "\">" + rs.getString(1) + ">");
Then close the loop and that should populate a dropdown within the html form.

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

How to run a report from oracle 10g form in .csv format

dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..

i have already tried.
but the report show in htm or html format. that file will not save into csv. please help.

How to run the imported java class in form

Help!!!!!
Pls help me to run the imported java class in forms.
Package is created in forms while imported one class called
singlexml.class and that package has one procedure and one
function.
I just wanted to run that class.I mean the new package.
Thanks
Anil

Hi,
It is because the converter works on byte code and it only supports a subset of the Java language (see the JC specifications). It is kind of like compiling you code on Java 6 and trying to run it on Java 5. The JCDK outlines the required compiler version.
Cheers,
Shane

Error when running URL returned by GET_RUN_FUNCTION_URL for form INVIDITM

Hi All,
I'm trying to launch form INVIDITM with an URL returned by PL/SQL API FND_RUN_FUNCTION.GET_RUN_FUNCTION_URL. To generate appropriate URL I call GET_RUN_FUNCTION_URL like the following:
DECLARE
P_FUNCTION_NAME VARCHAR2(200);
P_RESP_APPL VARCHAR2(200);
P_RESP_KEY VARCHAR2(200);
P_SECURITY_GROUP_KEY VARCHAR2(200);
P_PARAMETERS VARCHAR2(200);
P_OVERRIDE_AGENT VARCHAR2(200);
P_ORG_ID NUMBER;
P_LANG_CODE VARCHAR2(200);
P_ENCRYPTPARAMETERS BOOLEAN;
v_Return VARCHAR2(2000);
BEGIN
P_FUNCTION_NAME := 'INV_INVIDITM_ORG';
P_RESP_APPL := 'MSC';
P_RESP_KEY := 'MANUFACTURING_SUPER_USER_ASCP';
P_SECURITY_GROUP_KEY := 'STANDARD';
P_PARAMETERS := 'org_id=208 item_id=216955';
P_OVERRIDE_AGENT := NULL;
P_ORG_ID := NULL;
P_LANG_CODE := 'US';
P_ENCRYPTPARAMETERS := NULL;
v_Return := FND_RUN_FUNCTION.GET_RUN_FUNCTION_URL(
P_FUNCTION_NAME => P_FUNCTION_NAME,
P_RESP_APPL => P_RESP_APPL,
P_RESP_KEY => P_RESP_KEY,
P_SECURITY_GROUP_KEY => P_SECURITY_GROUP_KEY,
P_PARAMETERS => P_PARAMETERS,
P_OVERRIDE_AGENT => P_OVERRIDE_AGENT,
P_ORG_ID => P_ORG_ID,
P_LANG_CODE => P_LANG_CODE,
P_ENCRYPTPARAMETERS => P_ENCRYPTPARAMETERS
DBMS_OUTPUT.PUT_LINE('v_Return = ' || v_Return);
END;
With this I get an URL like:
http://<hostname>:<port>/OA_HTML/RF.jsp?function_id=1192&resp_id=56233&resp_appl_id=724&security_group_id=0&lang_code=US&params2=org_id%3D208%20item_id%3D216955
Running this URL, I get the error message:
"APP-FND-01016: Routine FDFRKS: Unknown structure ID for flexfield code GL number with application ID 101"
Can anybody tell me how to fix this, or if I missed specifying any more parameters in P_PARAMETERS?
Any help is highly appreciated...
Thanks and Regards
Carolin

Hi,
I got some help for this problem from Oracle support community: Setting paramter CHART_OF_ACCOUNTS_ID.
This seems to solve the problem. I don't get the error message any more, when setting the following:
P_PARAMETERS := 'org_mode=N chart_of_accounts_id=101 org_id=208 org_code=S1 item_id=216955';
Nevertheless, I still have problems with getting the correct parameter settings for form BOMFDBOM (form functions: BOM_BOMFDBOM, ENG_BOMFDBOM):
1. Trying to display a BOM with a specified alternate (e.g. EBOM) doesn't work. I pass the following parameter values to funtion GET_RUN_FUNCTION_URL:
P_FUNCTION_NAME := 'BOM_BOMFDBOM';
P_RESP_APPL := 'MSC';
P_RESP_KEY := 'MANUFACTURING_SUPER_USER_ASCP';
P_SECURITY_GROUP_KEY := 'STANDARD';
P_PARAMETERS := 'org_id=204 item_id=240996 zoom_org_id=204 zoom_item_id=240996 zoom_flag=Y zoom_alternate=EBOM current_rec=1 item_rev=A';
P_OVERRIDE_AGENT := NULL;
P_ORG_ID := NULL;
P_LANG_CODE := 'US';
P_ENCRYPTPARAMETERS := NULL;
The returned URL doesn't behave as expected: Though the form for respective alternate is displayed, the alternate field is empty and it isn't possible to select any field on the form, as following error message is displayed:
"APP-BOM-20087: This bill already exists. Please enter another alternate to create an alternate bill, or use Query Find to find an existing bill."
2. Trying to set query only mode for this form alway displays an empty "Find Bills" form, instead of the specified BOM in query only mode. I try to set this mode by the following:
P_PARAMETERS := 'org_id=204 item_id=240996 zoom_org_id=204 zoom_item_id=240996 zoom_flag=Y zoom_alternate=EBOM current_rec=1 item_rev=A query_only=YES';
Please, can anybody help me with this...
Thanks & Regards
Carolin

Drop Downs in adobe forms using Web dynpro ABAP

Hi all,
Im new to this adobe forms using webdynpro abap.
In my requirement i have two drop downs on the form.
by selecting value in one drop down i have to fill corresponding values in the other drop down.
Using only WDA i know how to do this but with adobe i dnt know how and where i have
to catch the drop down value and write my code. please let me know how i can achieve this.
one more thing whatever action or events we are performing on the form where we have to place our code for this?
Thanks,
santosh

hope this helps -
[Thread: Populating one Drop-Down list from the selection of another Drop-down list |Populating one Drop-Down list from the selection of another Drop-down list;

Why same query runs on isqlplus but not in Forms/Reports trigger

Hi,
I have one query in which I extract one column with parent table join if I run same query on isqlplus prompt it works but if I run same on Forms/Reports trigger it says found "select" where something else expected.
below is an example .
select em1.mreading, em1.grid_code,
(select em.mreading from energy_mreading em where em.grid_code=em1.grid_code and em.transformer_code=em1.transformer_code
and em.bus_bar=em1.bus_bar and to_date(to_char(em.r_date,'dd/mm/yyyy'),'dd/mm/yy') = to_date('02/01/07' ,'dd/mm/yy') - 1)
as Yreading
from energy_mreading em1
where to_date(to_char(em1.r_date,'dd/mm/yyyy'),'dd/mm/yy')= to_date('02/01/07' ,'dd/mm/yy')
Any one can help me, is there any restriction/limitations in Forms/Reports triggers.
Thanks, Khawar.

In forms and cursors you can not use scalar subqueries as you do. You have to use joins!
select
     em1.mreading
    ,em1.grid_code
    ,em.mreading as Yreading
from
    energy_mreading em1
   ,energy_mreading em
where 1=1
    and trunc(em1.r_date) = to_date('02/01/2007','dd/mm/rrrr')
    and em.grid_code = em1.grid_code
    and em.transformer_code = em1.transformer_code
    and em.bus_bar = em1.bus_bar
    and trunc(em.r_date) = trunc(em1.r_date) - 1
Try this, hope it works.

Filling Drop down in Adobe forms

Hi experts,
I am developing a new Adobe form.In that I am using a table,the table consist of three drop downs in each row.
My requirements are
1. I want to fill the three drop downs.Guide me in that..
2. How to capture the value selected in first dropdown...
2. Based on the value selected in first dropdown I want to set the remaining two dropdowns.
I am using AdobeDesigner 7.1.
Please help me to achive this ....
Thanks&Regards,
Mathi.

Hi Mathi,
Answers to your questions:
1. To fill the drop down select the drop down you want to fill and go to the Object palette, choose field tab and there would be an option list item press the icon button and the value you want. Similarly use button to remove the values.
2. To use the values outside the form bind the drop down to a attribute from the data source.
3. To use inside to set values of the remaining drop downs use the following code at the exit event of the first drop down.
if (a.rawValue == 'a' )
b.rawValue = 'f';
c.rawValue = 'h';
here i have supposed that a, b, c are three dropdowns.
a has values : a,b,c.
and b has values : d,e,f.
and c has values : g,h,i.
To write this code in the exit event of the first drop down(a) select it and in the script editor choose exit event.
To show script editor go to windows in the menu and choose script editor.
I hope it will be helpful.
Regards,
Vaibhav Tiwari.

How to run the 9I report from the forms menue 9i

how to run the 9I report from the forms menue 9i.
Shehzad Latif

Hi,
1. create a Reports Object node in Forms. If you use teh same object node name then you can write generic code that works in all Forms
2. Get the whitepaper about Forms/reports integrtion
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Frank

Error While running Oracle Look and feel Template Form - (LAF_TEMPLATE)

Forms Version 10.1.2.3
JRE version 1.6.0_30
Operating System Windows XP
I am trying to setup oracle look and feel project on my local machine.
For that i upgraded forms to 10.1.2.3 then i also applied path no *9593176* (But not yet performed steps related to jacob and webutil).
Problem : When i run Oracle look and feel template form it comes up with following error.*
Forms Applet version is : 10.1.2.3
Exception in thread "thread applet-oracle.forms.engine.Main-1" java.lang.NoSuchMethodError: oracle.forms.handler.IHandler.getApplet()Ljava/applet/Applet;
     at oracle.forms.fd.DrawLAF.init(DrawLAF.java:285)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hello,
I have spent a lot of time to indicate wherever I could that you don't have to ask questions about the LAF on this forum. You have two other different locations, a dedicated email and a dedicated forum.
At the first sight, it seems that you have not used the laf_10123.jar in your archive tag.
Thank you,
Francois

UNIX: problem running an DEV & QA environment using form/report servlets

UNIX: problem running an DEV & QA environment using form/report servlets
I am trying to setup on one server an DEV and QA environment using the Forms Servlet, Forms Listener Servlet and Report Servlet.
I think I have the Forms Servlet and Forms Listener Servlet running properly. The problem is setting up the DEV and QA environment for running reports.
For example, when in DEV environment I would like to run a report from a directory specified in the REPORTS60_PATH. This doesn't seem possible.
It might be easier if I describe my configuration first:
DEV: run all forms and reports from the directory /data/release/dev
QA: run all forms and reports from the directory /data/release/qa
---DEV & QA Settings Forms Listener Servlet:
zone.properties:
# DEV
servlet.fl60dev.code=oracle.forms.servlet.ListenerServlet
servlet.fl60dev.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev.env
# QA
servlet.fl60qa.code=oracle.forms.servlet.ListenerServlet
servlet.fl60qa.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/qa.env
---DEV & QA Settings Forms Servlet:
servlet.f60servlet.code=oracle.forms.servlet.FormsServlet
--- Settings for Reports Servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
Custom Env files since we are using Developer 6i Patch 7
dev.env and qa.env
Here I specify FORMS60_PATH and REPORTS60_PATH,
eg: DEV -> FORMS60_PATH=/data/release/dev
REPORTS60_PATH=/data/release/dev
likewise for QA ../qa
In the formsweb.cfg file i have something like:
[dev]
serverURL=/servlet/fl60dev
form=test.fmx
[qa]
serverURL=/servlet/fl60dev
form=test2.fmx
I have tested the following and they work without problems:
1. forms listener test page, eg: http://webserver:7777/servlet/fl60dev
2. running forms from the 2 environments
eg: http://webserver:7777/servlet/f60servlet?config=dev
this runs the form in the FORMS60_PATH (/data/release/dev)
Now my problems start with Reports.
When I run a report from forms (using run_report_object) it will not run any reports
as specified in the REPORTS60_PATH
Even using this url:
http://webserver:7777/servlet/RWServlet?server=rep60&report=test.rdf&destype=cache&desformat=html&
userid=scott/tiger@test9i
It NEVER seems to pickup and use the REPORTS60_PATH. I have tried nearly everything.
I have gone throught the instructions in "Integrating Oracle9iAS Reports in Oracle9iAS Forms -
White Paper"
(http://otn.oracle.com/products/forms/pdf/277282.pdf)
and Forms6i Patch 7: Oracle Forms Listner Servlet for Deployment of FOrms on the Internet
(http://otn.oracle.com/products/forms/pdf/p7listenerservlet.pdf)
plus any other documents in metalink relating to forms, or report servlets. I am
totally confused, please help.
I have tried setting the REPORTS60_PATH in the following files without success:
custom.env (as specified by initArgs=EnvFile in zone.properties)
jserv.properties
in the zone.properties I have tried to set a custom env file for the report servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
servlet.RWServlet.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev_rep.env
NO LUCK.
The only place that I can set the REPORTS60_PATH
is in "[6iserver home]/reports60_server" file when I start the reports server (did I even
get this right - I do have to have a reports server running don't I?)
Does this meaan I have to run multiple report servers for each of my environments?
Based on all the documentation I thought that REPORTS60_PATH as specified in the files relating
to the forms servlet would be the place to specify the path.
As you will understand I am getting really fustrated with this and it seems to
me that the reports servlet configuration in 6i is really half baked and since 9i
is coming out it will never be fixed.

I am even not able to run forms servlets from two different forms60_path, Is there any configuration do you make other than what you have mentioned in this post.
I already open a TAR in this regard, I am still waiting reply from ORACLE.
Thanks,
Shaik Ather Ahmed

Facing Issue while running from on desktop through oracle form builder 10g.

Dear All,
I am facing No plugin to show content error while trying to run oracle from on desktop through form builder 10g. please help.
Thanks,
Pradeep

I am facing No plugin to show content error while trying to run oracle from on desktop through form builder 10g. What is your OS version?
What Java version are you using?
Have you configured your Oracle Developer Suite (ODS) 10g to run forms from the Forms Builder?
Craig...

Form run & DBornetwork conn. down, conn. up form run without restart app.

Similar Messages

Maybe you are looking for