Form SAVE error

When utilizing the form SAVE function, users receive the following: [ error ref code: m*Aj9UZm5qZoavGvdTZANA ]. What is this and how do I remedy the problem?

I am also encountering this error and would appreciate a response.

Similar Messages

No changes to save error message

Hello All,
I am using Oracle forms and db 10g. I want to have more than one forms simultaneously open. When I save a record in the third form I get a "No changes to save" error message twice. I know that the error comes from the other two forms. I tried to set the error message level to a higher value but I still get the error message.
So my question is :
Can I get rid of the "no changes to save" error message while having more than one form opened at the same time.

have a look at this solution http://talk2gerd.blogspot.com/2006/12/best-practices-on-error-and-on-message.html
snippet:
DECLARE
V_Error_Code       NUMBER;
V_Error_Text       VARCHAR2 (2000);
V_DBMS_Error_Code NUMBER;
V_DBMS_Error_Text VARCHAR2 (2000);
BEGIN
V_Error_Code      := Error_Code;
V_Error_Text      := Error_Text;
V_DBMS_Error_Code := DBMS_Error_Code;
V_DBMS_Error_Text := DBMS_Error_Text;
IF V_Error_Code IN (40401, 40405) THEN
    || 40401, 40405 - no changes to save / apply get filtered
    NULL;
ELSIF V_Error_Code IN (-1034, -3114) THEN
    || -1034, -3114 - not connected to database
    Message ('Not connect to database, exiting Form');
    Exit_Form (no_validate);
ELSIF V_Error_Code IN (40508, 40735)
AND   V_DBMS_Error_Code BETWEEN -20999 AND -20000 THEN
    || -20000 errors are raised by RAISE_APPLICATION_ERROR
    || They are handled in a different way
    Show_and_Log_DB_Error (V_DBMS_Error_Text);
ELSE
    || All other errors went into Show_and_Log_Error, where they
    || get inspected, analyzed and logged.
    Show_and_Log_Error (V_Error_Code);
END IF;
END;

Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL

Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro Mariano

Hi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano

Save error when exporting to PNG in Illustrator using a Macbook with Yosemite

Anybody experience the issue of png being saved with "/" in the beginning of the file name when exporting to png in Illustrator? This only happens when I use my mac not my PC.
Due to the save error my PC cannot identify the files and when the files are linked in Indesign they are not copied when packaging the indesign file.
Any advice on the issue are most appreciated

I don't have a lot of experience with this kind of problem, but the first thing I'd check is the parameter block you're passing the action call. I don't know why it would matter if the dialog appeared or not, unless the export settings block wasn't being filled in with everything it needs?
You might try recording an export you perform manually via the action palette, and then saving it to a file. You can open it up manually and compare it (even if it's a binary block) to what you're doing in code. You might spot something that way.
I don't know what else to suggest though. It's unlikely to be an SDK bug, though it could be a bug in the action-aware part of the exporter.

Save error when exporting to Png i Illustrator

Anybody experience the issue of png being saved with "/" in the beginning of the file name when exporting to png in Illustrator. This only happens when I use my mac not my PC.
Due to the save error my PC cannot identify the files and when the files are linked in Indesign they are not copied when packaging the indesign file.
Any advice on the issue are most appreciated

Hi,
I am moving your posting to Illustrator Forum from Acrobat.com Forum.
Thank you
Hisami

TextEdit Save Error Message "you don't have permission..."

TextEdit, in both Mountain Lion and now Mavericks,displays what appears to be a fake "Save "error:
"You don’t have permission to write to the folder that the file “XXXXX.txt” is in.
Your changes will not be saved until the problem is resolved."
I have repaired permissions several times with no result. The permissions are clean, not requiring fixing. I am Admin. I should be able to save anywhere, altho I have tried saving in many different places just to test.
It does not ask for the Admin password.
Here's when it happens:
1) Open a document. either new or existing.
2) Type some text in it.
3) Save -- choose destination if new and it seems to work.
4) Start typing in the document
5) After a few seconds I get the above error message that drops down from the title bar at the top of the document.
6) I have to click the OK button and I can go on typing.
Repeat
Save document, type a few characters, get error message, click OK.
Repeat all day long.
Yet it seems that my changes have been saved.
Most annoying.

Wow. Why bother reading the forum if you are convinced the solution isn't going to work before even trying it?
Another viewer besides myself commented above that they repeated the process and it worked for them, so it's not exclusive to my setup.
A search for textedit revealed 97 files. The search took 12 seconds on my eight core Mac Pro.
I quit EasyFind, opened TextEdit and made a simple change in the preferences, saved and then quit TextEdit.
I searched again with EasyFind, sorted by Modified and found eight files had been changed at the exact time I quit TextEdit. One of those is the culprit. I deleted them all.
No, I don't work for EasyFind, nor do I know the people, nor do I receive compensation of any type from them. I like it and recommend it because it just plain works and I like to share good info like that with the Mac community, (BTW, it's free)
Good luck with solving it on your end. If you find a more scientific solution please share it so we can see how it should be done by a real tech support guy instead of an amateur like me. (I was an Apple Var at one time, now I do some support for my friends. I'm on about my tenth Mac, the first being a Fat Mac, and have two Macs and an iPhone at this time. No doubt I have no idea what I'm doing)
You really are funny! You must be a, oh never mind, I was going to name a political party.

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

I have a problem in this that i want to paas a form in a case that when user pres n then it must go to a form but error arises and not working good and threading is not responding

made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
    class Program
        #region Cosmos Builder logic
        // Most users wont touch this. This will call the Cosmos Build tool
        [STAThread]
        static void Main(string[] args)
            BuildUI.Run();
        #endregion
        // Main entry point of the kernel
        public static void Init()
            var xBoot = new Cosmos.Sys.Boot();
            xBoot.Execute();
            Console.ForegroundColor = ConsoleColor.DarkBlue;
            a:
            Console.WriteLine("------------------------------");
            Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
            Console.WriteLine("------------------------------");
            Console.WriteLine();
            Console.WriteLine();
            Console.WriteLine();
            Console.WriteLine("\t _____
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |___________");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|_____|       |____________|         |____________|      ____________");
            string input;
            Console.WriteLine();
            Console.Write("\nAbout OS     : a");
            Console.Write("\nTo Shutdown : s");
            Console.Write("\nTo Reboot    : r");
            Console.Write("\nStart Windows Normaly : n");
            Console.WriteLine();
            input = Console.ReadLine();
            if (input == "s" || input == "S"){
                Cosmos.Sys.Deboot.ShutDown();
            else
            if (input == "r" || input == "R"){
                Cosmos.Sys.Deboot.Reboot();
            else
            if (input == "a" || input == "A"){
                Console.ForegroundColor = ConsoleColor.DarkBlue;
                Console.Clear();
                Console.WriteLine("\n\n\n-------------------------------------");
                Console.WriteLine("version: DISPLAYS OS VERSION");
                Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
                Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
                Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
                Console.WriteLine("-----------------------------------");
                Console.Write("You Want to know : ");
                input = Console.ReadLine();
                if (input == "version"){
                    Console.WriteLine("--------------------");
                    Console.WriteLine("OS VERSION 0.1");
                    Console.WriteLine("--------------------");
                else
                if (input == "about"){
                    Console.WriteLine("--------------------------------------------");
                    Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
                    Console.WriteLine("--------------------------------------------");
                Console.Write("Want to go back to the main window");
                Console.Write("\nYes : ");
                string ans = Console.ReadLine();
                if (ans == "y" || ans == "Y")
                    goto a;
                    Thread.Sleep(10000);
                else
                if (input == "n" || input == "N")
                    Thread.Sleep(5000);
                    Console.Clear();
                    for (int i = 0; i <= 0; i++){
                        Console.Write("\n\n\n\n\t\t\t\t\t ____        ____   ___
                        Console.Write("\n\t\t|\t\t | |      |    |
|   | | | | |");
                        Console.Write("\n\t\t|\t|    | |---- |    |
|   | | | | |---");
                        Console.Write("\n\t\t|____|____| |____ |___ |____ |___| |    | |___");
                        Thread.Sleep(500);
                    Thread.Sleep(5000);
                    Console.Clear();
                    BootUserInterface();
                    Console.ReadLine();
//                    Form1 fo = new Form1();
                else{
                    for (int i = 0; i <= 5; i++){
                        Console.Beep();
                        Thread.Sleep(1000);
                        goto a;
            while (true);
        private static void BootUserInterface() {
            Thread t = new Thread(UserInterfaceThread);
            t.IsBackground = true;
            t.SetApartmentState(ApartmentState.STA);
            t.Start();
        private static void UserInterfaceThread(object arg) {
            Form1 frm = new Form1(); // use your own
            Application.Run(frm);

Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

File Save Error on Checkout

Has anyone else received an error message which says "File Save Error" when attempting to check out a document in the Solution Manager blueprint document store? We have a document which can be opened in display or change mode, and exported, but when trying to check out, users receive a message which states simply "File Save Error" with an "OK" button. Pressing OK closes the dialog message and the check out process cancels. Other documents checkout with no error. The error message looks like a standard Windows error, rather than an SAP error message.
Thanks for any ideas!
Bob

Hello Thierry,
I thought I looked at this. The name was changed, but SolMan history shows the old name, with a COLON (:)... of course a name cannot have a colon in the middle.
Right on the money.... thanks for prompting me to look again.
(But SAP still should address the error message... it simply left us in the dirt.)
Thanks again!
bOB

First ever Web Form - URL error

Hi. I'm attempting to call my first Web form, but I'm getting this error:
URL:
http://springfield01:7777/forms/frmservlet?config=ttmsmenu
ERROR:
500 Internal Server Error
Forms Servlet Error.
Missing or invalid value for baseHTML parameter.
Please check the servlet configuration to make sure this value specifies a valid file.
My FormsWeb.Cfg file is posted below. Any help would be greatly appreciated!
FORMSWEB.CFG:
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
# HTMLbodyAttrs=
# immediately hide the applet parent window
HTMLbodyAttrs=onLoad='javascript:self.moveTo(1601,1201)'
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
# imageBase=DocumentBase
imageBase=/forms/java
# Forms applet parameter
#width=1000
#width=100%
width=500
# Forms applet parameter
#height=700
#height=100%
height=500
# Forms applet parameter
separateFrame=true
# separateFrame=
# Forms applet parameter
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=no
# background=
# background=ttmslogo_new.gif
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/apps/oracle9i/product/oracleforms
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

# or by overriding them in a specific, named configuration (see below)
[default]
this line seems to start a named section that finishes nowhere.
comment this line (put a # in front of it)
FRancois

Premiere Elements 7 project save error and compatibility error on Win 7

I have installed Premiere Elements 7 on a Win 7 32 bit os HP8000 desktop. When I try to save a project to H: drive on a Novell server, I get a "project save error". You can save fine to the desktop, but not to the H: drive. If you try to open a Premiere Elements 7 file (on the Win 7 machine) that was created on a WinXP machine with the same Premiere Elements 7 program, you get "Projects created with adobe premiere pro and adobe premiere elements are not compatible. Please use the appropriate application to open this project."
Help please. Thanks.

Solved. The problem was to do with the Novell Client. I installed the latest version (Client 2 sp1 ir4 for Win 7) and that solved the problem.
fyi and thanks
Patty

How can I fill in a form, save the form such that it cannot be further altered, and email it as it was saved?

How can I fill in a form, save the form such that it cannot be further altered, and email it as it was saved? I created a form with 5 fields. It is a form letter that is intended as a receipt for funds received. I want to fill in the date, name, amount received, etc., save the form with inserted data fields so they can't be further altered, and be able to email it as a complete unalterable PDF document. What I'm doing now, is filling in the fields, printing it, scanning it, and emailing it as an unalterable document. The document was created on a Mac using Adobe Acrobat Pro version 10.1.13. The document is filled in on a PC that only has Adobe reader on it, printed, scanned and emailed as an attachment. There must be a better way!

If you have access to a ASP.net Web Server, then the submission could be FLATTENED with FDFToolkit.net and emailed without client-side email software by only using Adobe Reader.
For more information check out the following websites:
http://www.pdfemail.net/examples/
http://www.fdftoolkit.net/examples/

My form was created by FormsCentral. I save as a PDF and emailed it to all of my club members. When they complete the form, save it, and email it back to me, I get a blank form. Why?

My form was created by FormsCentral. I save as a PDF and emailed it to all of my club members. When they complete the form, save it, and email it back to me, I get a blank form. Why?

If you had iCloud backup turned on, and it made a backup - yes. If you didn't have iCloud backup turned on - but were using iCloud for Contacts, calendars, etc. You will get the contacts and calendars, etc back.
Purchases made with your appleID can be redownloaded as long as they are still available in the iTunes store.
If you connected your phone to a computer with iTunes, there may be a backup on there as well.

Parameter form format error

I have just deployed my first report to our 9iAS app server. I can successfully run the report in my browser if I pass ALL parameters in the URL. When I attempt to use paramForm=YES in my URL, the parameter form appears like it should, but when I selected values (LOV) on the parameter form and click "Submit Query", I get the following error.
REP-52007: Parameter form format error.
java.lang.IllegalStateException: Response is already committed!
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse.setContentType(EvermindHttpServletResponse.java:973)
     at javax.servlet.ServletResponseWrapper.setContentType(ServletResponseWrapper.java:27)
     at oracle.reports.rwclient.RWReportRunner.setContentType(RWReportRunner.java:261)
     at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:135)
     at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:95)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1322)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1139)
     at oracle.reports.rwclient.RWClient.doPost(RWClient.java:328)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)
Can anyone tell me what is wrong? This report run fine, including the parameter selection, in the Report Builder. I simply saved the report out to a JSP and copied it to the report server.
Thanks,
Kevin

You may have hit a bug when passing parameter paramform as "PARAMFORM=yes" or "Paramform=yes", you will get the REP-52007 error. The fix will be available in Reports 9.0.2.1.
As a work around, please submit the request with all lower case "paramform=yes" and try again.
Hope this helps,
-Jeff Tang

Forms login error for first 2-3 time

Hello,
we have a strange issue , users from Europe region are getting Form connection error(FRM 92050) while they login for the first time of the day,self service page is coming fine then while opening any form it's giving error. after they close the session and try for another 2/3 times they are able to open the forms.
Jinitiator console is not showing any error.
Also FRD trace is not getting generated for the above case of issue.
we have shared appltop architecture with 4 apps tier loadbalanced. if setting 'ICX Forms Launcher' to direct hostname instead of loadbalancer url issue is not coming.but it doesn't prove load balancer has issue as self service pages are coming properly through LB
Any idea how to trouleshoot?
Thanks,
Rishi

Hi,
Please see (Note: 420021.1 - FRM-92050: FAILED TO CONNECT TO THE SERVER /FORMS/FORMSERVLET:-1 WHEN USING LOAD BALANCE) and (Note: 601694.1 - How To Check Session Persistence On BigIP F5 And Cisco Ace Load Balancer Appliances).
Regards,
Hussein

Form SAVE error

Similar Messages

Maybe you are looking for