Form SYSTEM does not exist "Message no. TD 705"

Hello all,
When I go to transaction FB03 for any document. Drill down on a line item. Click on pencil to change the line item. Click on long text button. Click on the editor icon. Message received "Form SYSTEM does not exist". The display is in SAPscript editor. I am unable to change to the Word editor using menu Goto > Change Editor. Message "Form SYSTEM does not exist" appears as the message.
Any idea what the message "form system does not exist" and how can this be corrected?
Thanks

Hi,
You encounter this problem because a the editor form needed is not available.
Speak with your ABAPer who can help you in the same.
Please also check if the form is activated.
Caio
Raghu

Similar Messages

Source system restore - Source system does not exist

Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashish

I get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

Transport Error: Source system does not exist. Message no. RSAR203

Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

Hi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh

Firefox/3.6.10 shows message whenever I click on an icon needing Internet access, saying 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist' and advising me to contact the author - ???

Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????

https://support.mozilla.com/en-US/questions/756907

Help I need help. i get this message'Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.' How do i fix this?

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
Well that is the message i get. I can still use firefox(version3.6.8)

You get that error if an extension is using an old and no longer supported method to install a plugin.
Which plugin are you trying to install?
See also http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"

Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PM

Hi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey

Transport Request got failed due to Source system does not Exist

Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
Ven

Dear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

Cannot make changes t oDTP - Source system does not exist

Hi,
I cannot open my DTP to make changes. when I tried to double click I got this error
Source system X01CLNT001 does not exist
Message no. RSAR203
I have tried connection test from SM59 and there seems to be no problem.
How do I resolve this?
thanks

Goto RSA1 --> Source System --> right click --> Check.
Is it giving any error?
You can click on restore also and check if anything improves.
Also check whether datasource and transformation is active.
Edited by: Pravender on May 28, 2010 12:11 PM

Parked document 1000 700010042 2010 does not exist, Message no. FP076

Hi,
There is one Document which is not on tax return but made a entry in a GL account (VAT).
When I display document from FB03 for fiscal year 2010 the transaction code FB03 is diverting to FBV3 and giving error message : "Parked document 1000 700010042 2010 does not exist" "Message no. FP076"
I also checked the tables "BSEG" & "BKPF" where this document is visible to me also I checked the GL line items from FBL3N for the VAT GL where this document is showing in line items report, but when i double clik to display this documents again am getting screen of FBV3 with the same error message.
can any one let me know what could be the problem? and how to resolve this issue?
Many thanks in advance.
Regards,
Abdul

Hi Venkata,
Thanks for the information....
Addition to the above information ... there are 3 line items are there in this document 1 - K (Vendor), 2 - S (GL).
The strange thing I can see is against 1st line item (K-Vendor) there is a clearing document updated.
So if there is a clearing document against vendor line that means this document is no more in parking ...
I am not sure why system is performing like this...
Can anyone help me on this ....
Thanks in advance.
Regards,
Abdul

Command $TAB : message Transaction $TAB does not exist Message no. S#343

when i use the command $TAB to refresh the buffers the system gives me the message
" Transaction $TAB does not exist
Message no. S#343 "
In some systems it works as intended. How can i correct that position.

try /$TAB

Number range for object MDTB does not exist - Message no. 61501

Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
Shankar

Hi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK

BP role UDM000 does not exist Message no. R1206

Hi Team,
I have created New BP role ZUDM0PY by copy of standard UDM000. Everything is working well , when I choose "Display BP" in Worklist   system throws error "BP role UDM000 does not exist Message no. R1206"
My doubt is if i am using BP role ZUDM0PY not UDM000 then why system throwing error for BP role UDM000? and what will be the solution.
Regards
Arun

Hi Arun.
I don't know why but 'Display Business partner' icon can shows only 'UDM000' now.
Please refer SAP Function UDM_WORKLIST_BUS_PARTNER_SHOW specified only 'UDM000' as follows.
*Prepare the parameters for displaying Bus Partner details
   SET PARAMETER ID 'BPO' FIELD 'UDM000'.
   SET PARAMETER ID 'BPOG' FIELD 'UDM000'.
   swc_create_object handle 'BUS1006' l_bpartnerid.
   swc_call_method handle 'DISPLAY' container.
No confidence but Is BP Role Cat. in configuration 'Define BP Roles' should be 'UDM000' ???

"Entry sheet does not exist message no. SE012"

Dear all,
One SES is created and saved. Now if i check system message as below.
"Entry sheet does not exist message no. SE012"
Please advice

Hi Deepu,
Please check in the PO, if in the Item Detail, The tab "Purchase Order History" is there or not, if it is there with the SES no, it means that the SES is created and you might not be able to view the same Please check the same no in the table ESSR.
Hope it helps you.
Regards,
Yawar Kahn

ESS Payslip error : Form ZF01 does not exist

Hi,
We have created a form in PE51 that is ZF01 and include IMG.
But we r getting the following error message:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZF01 does not exist
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
     at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
Regards
Anumit

Did you have to configure anything else in the img like the badi:define settings or the provide salary statement as pdf.   We are past the form doe'n't exist, but we are getting a similiar message.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when calling method INIT of class CL_HRXSS_REM
Can you help.

Form HR_SGTAXIR8A2002 does not exist

Hi,
When I try to run the IR8 form from Portal ESS I get the following exception:
"Form HR_SGTAXIR8A2002 does not exist"
It is a sapscript form. I used se71 and activated the form (but first I copied it from 000 because it was not available in our client). The language EN seems to be ok.
1. Am I missing some steps for activation?
2. Where can I see the program/transaction where this form is used? Is there a configuration table containing the sapscript forms and associated programs?
Any help is appreciated.
Thank you,
Adalbert
PS: I know what report the Portal is calling: RPCT8AR0_01. The report did run fine in R3 from the beginning. The problem is that the report is NOT running in the portal even with all the IMG config done. Strangely, RPCT8AR0_01 never asked for HR_SGTAXIR8A2002 (I had to copy it from 000) even if the sapscript form was not in our client before the copy.
After some debugging in se37 of HRXSS_SG_IR8A_GET_PDF I see that the report is looking for the form definition in table STXFADM. The form is not in the table (but I can edit it with se71). How can I get the form in this table?
Message was edited by: Adalbert Kovacs

1. Yes, I get the error after using SE71->Utilities->Copy from client.
2. I am not familiar with "driver programs" but I checked the following tables:
- STXFADM
- TNAPR (I think this is for Smartforms actually)
I don't have the form in any of these two.
So, to reformulate the problem, the error is generated by a missing entry in table STXFADM. This is a sapscript form, not a smartform. What is the table STXFADM used for and how can I add my form to the table?
Thanks,
Adalbert

Form SYSTEM does not exist "Message no. TD 705"

Similar Messages

Maybe you are looking for