Form upload & download

Hi abaper,
how can i download a script into local desktop
and how can i upload the same ?
i know there a standard program RSTXSCRP
to upload and download.
pls any one tell me how to solve this ?
Thanks & Regards,
VAni.

Program RSTXSCRP
For Upload
in the Object selection Block
Choose the Radiobtton : Form
in the Object name mention the Script Name
Mode: IMPORT
in the Control Parameters
If the file is on Application server choose the radio button Application server
file is on Presentation server choose the radio button Frontend
and execute.
For Download
in the Object selection Block
Choose the Radiobtton : Form
in the Object name mention the Script Name
Mode: EXPORT
in the Control Parameters
If you want to download the file to Application server choose the radio button Application server
If you want to download the file to Presentation server choose the radio button Frontend
and execute.
Read the Documentation of the Program , it is well documented.
Regards
Vijay Babu Dudla

Similar Messages

Interactive forms upload/download data

Hi!
i want to upload and download the data that it is in pdf to sap crm web application server like this [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05bc7e9-0183-2a10-17ab-cf77195fcdec]
thanks,
Raul Natu
Edited by: Raul Natu on May 13, 2009 1:12 PM

you have to use OLE techniques to achieve this.
for sample look at the coding of the following FM
KCD_EXCEL_OLE_TO_INT_CONVERT
this FM only takes the content from ACTIVE sheet.
what you need to do is first take the content from the ACTIVE sheet , then ACTIVATE the next sheet and read the content, etc.
Regards
Raja

Forms - document download problem

I have a form on a table with a blob and a mimetype column. The form upload / download works just fine on a http site.
The same setup on a https site works for document upload. But the download does not work -- the "Display column content" and "Save target as.." results in the following error: "Internet Explorer cannot download .. wwa_app_module.file_download from <site> The file could not be written to the cache".
This problem does NOT occur with the Firefox browser, however most of our users use IE.
Any suggetsions? If your solution involves custom code, please provide the detailed steps. THANK YOU

Helo
use
select obj# into v_obj_id from sys.obj$ where name ='NAME OF THE PACKAGE' and type#=11;
update sys.source$
set source=replace(source,'Display column content','Text to display')
where obj# = v_obj_id
and source like '%Display column content%';
Best Regards
Jose

Forms 11g WebUtil upload/download

I've been working on writing an upload/download button in Forms 11g using WebUtil and doing the configurations on the server and such and I was told by someone in my office that this project originally started in Forms 10g with WebUtil with her but that she discovered that to get WebUtil to work we would have to have jInitiator installed on the client side computers. Does anyone know is this still the case in 11g as well?

I have been following the "Configuring WebUtil" and "Runtime Setup Checklist" help documents that were in Forms 11g Help section. I am trying to use the Upload and Download features. client_to_db and db_to_client. And also the open_file_dialog.
I did just notice where in the Configuring WebUtil document it says that WebUtil will install to the client computer anything that is needed for it to run, but I'm not sure that with the security settings on the computers that our clients will be using would allow something like that, I'm pretty sure the servers probably do not have admin rights to the client computers, most of the clients don't even have admin rights to their own computers.

How to upload / download sapscript forms

Hi,
Is it possible to upload / download sapscript forms to pc?
Thanks in advance

Hello,
Across clients we can copy scripts by Tx. SCC1. Please keep in mind that you have to give the task ID and NOT the Transport Request ID if the Script/Std. Txt has to be ported across the clients.
Regards, Murugesh AS

Urgent : file upload / download functionality in oracle portal page

Hi friends
I am new to portal development and am working on oracle portal 9i rel2 . I need to know how to put the file upload and download functionality in any page. the functionality given in oracle portal user guide is not user friendly (i.e in the content area add item of type file" ) .... i need to now is their any way to achieve the simple , one button click upload download functionality ..like we do in yahoo mails etc.
any help will be highly appreciated.
regards
Dheeraj

Well, I do not know the exact location of the document, however you can find the document to do this in modplsql User Guide ..(File Upload/Download).
I am pasting some hint:
e.g.
Create an html form..code something like this:
<html>
<head>
<title>test upload</title>
</head>
<body>
<FORM enctype="multipart/form-data"
action="pls/mydad/write_info"
method="POST">
<p>Author's Name:<INPUT type="text" name="who">
<p>Description:<INPUT type="text" name="description"><br>
<p>File to upload:<INPUT type="file" name="file"><br>
<p><INPUT type="submit">
</FORM>
</body>
</html>
Create a table
(who varchar2(..).
description varchar2(..),
file varchar2(..));
Your procedure something like this:
procedure write_info (
who in varchar2,
description in varchar2,
file in varchar2) as
begin
insert into myTable values (who, description, file);
htp.htmlopen;
htp.headopen;
htp.title('File Uploaded');
htp.headclose;
htp.bodyopen;
htp.header(1, 'Upload Status');
htp.print('Uploaded ' || file || ' successfully');
htp.bodyclose;
htp.htmlclose;
end;
You should be able to download/access the file using the following URL format:
http://<host>:<port>/pls/<dad>/docs/<file_name>
Where file name is = Look for the value in the "myTable" > file.
Do tell how you get on this.
Thanx,
Chetan.

HR Renewal: Client infotype with upload/download file functionality

Hi Gurus,
I am writing to you today cuz a client of mine asked me to adapt one of their client-specific infotype for HR Renewal. Now the old-legacy infotype was developed by someone else so I am just to adapt the functionality for decoupled infotype framework and front-end.
The infotype has no subtype and record from 01.01.1800 to 31.12.9999 with a table-control listing all the pdf (or other format) file for a particular employee (such has income tax statement; SEPA bank account sheet; ID card etc... any kind of personal document relevant to employees). (that data is listed from a client Z table when opening the infotype; e.g. there is not sub-strucutrue in the pnnnn to represent that information).
upload, download and open file functionality is done via the infotype old-framework screen 2000 by some custom code merely replicated what is available by cl_gui_services.
File are stored directly on the SAP system not using the GOS option;
back-end stuff is more or less done and working at least I can do pretty much what I want in puit_ui tcode; read;modify... off course no file upload there
front-end is another story; I have managed the FPM views for the infotype (dataset; biz card, etc) and also I have managed to list the existing file in the ATS list.
However What I need still to do is to be able to upload from NWBC files to the back end system; and also download or open them. this seems to be a little harder than expected.
I am now doubting if I should rather do a P&F FPM form based or if I can achieve what it is suppose to do? or maybe I should go back to the client and talk him through changing that infotype architecture? using subtype instead of a connection to a Z table and GOS services to store employee files seems way easier for me; but still I am facing the upload/download functional which I dont really no how to wrap around the FPM either it is ATS or GL2. I have checked indian-specific infotype 3743 has this uploading functionality (GOS) but no corresponding FPM I could inspire myself on!
Also, not sure if I am missing something but when I try to change the value of one the field on the infotype pnnnn structure (that infty actually has one checkbox field) and save I end up with a dump because to BOL model does not find my entity (lo_entity). it s not the first infotype I am enabling for HR Renewal and I never had this error before.. I wonder what I am missing....
Would you gurus oriente me a lil on how I should best proceed? should I rather use P&F? Your help and advise would greatly be appreciated!
Thanks.

Hello:
So after some thinking through:
- upload and download are handler by the FPM ATS feeder (client copy with enhanced options into to manage event method).
- lo_entity without pointer causing dump occurred because I had inconsistently used the set automatic tag option into the FPM configuration floorplan editor.
- PAOC_ASR_PERSONAL_FILE would be my recommendation but client want to follow on its own mini-dev for personal file hosting.
Thank you gurus!

Error in creating upload/download application

Hi,
I am trying to create the Howto:Upload/download application and got this error when I browse the file and select submit. Can you please help me to find out why I got this error?
Thanks,
Mon, 12 Apr 2004 18:15:58 GMT
ORA-00942: table or view does not exist
DAD name: demo
PROCEDURE : wwv_flow.accept
URL : http://testserver:80/pls/demo/wwv_flow.accept
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Apache/1.3.12 (Win32) ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.22
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=testserver
REQUEST_METHOD=POST
QUERY_STRING=
PATH_INFO=/pls/demo/wwv_flow.accept
SCRIPT_NAME=/pls
REMOTE_HOST=
REMOTE_ADDR=10.10.2.217
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=
HTTP_CONTENT_LENGTH=24043
HTTP_CONTENT_TYPE=multipart/form-data; boundary=---------------------------7d45b3a4013c
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)
HTTP_HOST=testserver
HTTP_ACCEPT=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=LOGIN_USERNAME_COOKIE=james; ORACLE_PLATFORM_REMEMBER_UN=janes:james; WWV_FLOW_USER2=4D86B80558A076CE; WWV_CUSTOM-F_604016577451304_100=-1; WWV_CUSTOM-F_604016577451304_104=4D86B80558A076CE
Authorization=
HTTP_IF_MODIFIED_SINCE=

it sounds as if your DAD is referencing a table for its DocumentTablename that doesn't exist. the correct doc table for a supported installation of htmldb is "wwv_flow_file_objects$". my default install of htmldb created a dad like this...
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword %html_db_public_user_pwd%
PlsqlDatabaseConnectString ap6002wgs.us.oracle.com:1521:apwgs ServiceNameFormat
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
...and, again, it sounds as if your "demo" DAD is pointing to something other than wwv_flow_file_objects$. can you check your DAD, please, and let us know if correcting that doesn't fix things for you? also, so you know, that how-to doc assumes that you're using a supported configuration of htmldb. aside from what installs from the 10g companion CD, the only other two supported configurations are mapped out at...
http://otn.oracle.com/products/database/htmldb/howtos/howto_useoas10g.html
...and...
http://otn.oracle.com/products/database/htmldb/howtos/howto_use9ir2ohs.html
...so your "demo" dad should match what's in there.
thanks,
raj

Upload/download budgets

Hi,
I came across a requirement in Hyperion Planning like,
.The system should allow to upload / download budgets using an external budgeting tool .
Is it possible?If yes then how it will be?

This sounds like an integration that would depend on the external tool being referred to. There are many way to load data into Hyperion Planning. There are data load rules to Essbase, there is data entry through the web forms, and there is also the possibility of loading data via SmartView.
The requirement is very generic but hopefully this points you in the right direction.
-Pete

Uploading/Downloading word,excel..etc in Oracle8i using Forms6i

Dear Friends
I want to insert word,excel or image from client m/cn to server's database(Oracle8i) using Forms6i.
Can anyone please suggest me the best way of uploading/downloading these kind of file using Forms6i.
Other than OLE.Bcoz I have acheived this thro' OLE in Forms but I am lookin for some other solution in Forms only.This is not required for any web application...only client/server architecture.
Please advice asap.

It's not possible with Forms6i ... The reason being that Forms6i lacks any built-ins to deal with binary data in file access! The only way in C/S is OLE which you already have ... or if you don't mind then you can write a small external utility yourself that can do the upload/download. This you could write for example as an OCX, an external DLL ... or most simple as just a stand alone executeable called by HOST-command.
Regards,
Stefan

Upload/Download speed of files using Java

Hey All,
I have created a signed Java applet which, among various other things, allows uploading and downloading of files between the server and client. Both Upload and Download is handled through HTTP. For Upload I create a multi-part POST request to transfer the data to a script on the server which intercepts it. For download I craft a URL to http://myserver.com/filedirectory/file.extension. From that I form a HttpURLConnection and read from the stream to the file system of the client. This applet is only run on an internal network, which currently has 100mbit connection. However, I am noticing upload/download speeds of less than 1MB/s (I believe 100mbit = 12MB/s approx). I am currently using a buffer size of 8kb.
Can anyone think of any ways to increase download speed? Would it help to increase the buffer size, knowing we will always be on a closed network? Here Is my upload code, and my download is similar but in the opposite direction.
int bytesRead = 0;
byte b[] = new byte[BUFFER_SIZE];
BufferedInputStream bufin = new BufferedInputStream(new FileInputStream(f));
while ((bytesRead = bufin.read(b)) != -1) {
        * write output
     out.write(b, 0, bytesRead);
     out.flush();
out.close();
bufin.close();I have not included the rest of the code which creates the POST request because the upload is otherwise working perfectly despite the speed, and I have confined the bottleneck to this part using debug output.
Thanks much

Will removing the flush after every loop somehow decrease accuracy?No.
Ideally, files should be the same exact size on the server as the client after upload has finished.Deferring the flush() can't change that. It just lets you write in larger chunks, which is always good.
Which one is the socket receive buffer?The buffer whose size is set by Socket.setReceiveBufferSize().
Currently the size of BUFFER_SIZE in the example above is set to 8k.That's the application buffer. Good size.

File Upload/Download Problem

Hi,
I have a fileupload button. The attributes type is XSTRING, which i bound it with "data" property of download.
When i download this file with "download" element, it comes in a zip file and as XML files. Only the jpg files are downloaded correctly.
How can i solve this?
Thanks.

Hi,
I am so sory for my very late answer.
If you want to upload/download files, you should have a node which includes attributes
(attribute names are just example ):
1) filename(type: for example afilename),
2)mimetype (type : string),
3) file(type : a data element with type 'RAWSTRING').
You must match your fileupload element's attributes with them:
"DATA" attribute --> file ,
"fileNAME" attribute--> filename,
"mimeTYPE" attritube -->mimetype.
When you want to download this file, you should put a filedownload element and match this element's attributes with the node's attributes which i described above.

Is there a way to upload/download photos anonymously?

Is there a way to anonymously upload/download photos to the web without any sort of identification?
For example, if I'm using something like TOR to browse, and I find an icon on a site or Google Images that I want to use as my avatar for a social networking site, can I "Save As" from my TOR browser and download that image anonymously to my computer's desktop? Or does my information leak when I save to my computer?
...and then, in turn and perhaps more importantly, how do I upload that photo as my social network photo/avatar without any sort of identifying source tag or whatever from my computer?
When I attempt to upload a photo to the site, it keeps showing something like /Users/[iMacUserName]/Desktop
Is there any way to do this anonymously?
Would having something like a VPN be more useful than TOR in this situation?
I'm new to all this, so I'd really appreciate any information possible. If it makes more sense to send an IM or private email, please feel free to contact me that way as well.
Any recommendations for a great VPN to use with mac would be great too.
Thanks so much in advance for your time.

The image isn't anything dirty, nor is it necessarily copyrighted... I mean, it's a photo still from a movie I like that I wanted to use as my avatar photo. So I suppose technically it's copyrighted, but I'm not trying to pass it off as really being me, or mine. I see people using that kind of thing for avs all the time.
I guess what I'm trying to say is that I'm not worried about the image I'm using, I'm worried about other users on the site being able to somehow find out that the image was uploaded from my computer (IP address, location, etc)
Like, could the admins at a social networking site see that the image was uploaded from my computer?
When I prompt the "upload" it only gives me the option to directly upload it from my computer, and as I said in my OP, it comes up with my iMac computer ID or whatever as the source of the file. (In the upload bar). Once I upload it, I think this information disappears, as I've tried to inspect other users avatars and it says owner info is private... but can the admins see WHERE the photo was uploaded from?
Does something like TOR block this? Or do I need something else? I tried to do some research on it and found another user asking a similar question and someone responded saying they needed to tunnel it or something?
Again, I'm not asking this b/c I'm trying to upload some inapropriate photo, but because this site is very strict about multiple accounts, and I have another account there that I'm not ready to delete yet. I just want to have a second, 100% anonymous account. (and feel I should also put it out there that it's not to do anything illegal or harmful to anyone either) just for me.
Thanks again for any more answers on this.

Upload/Download file to/from a document library in a SharePoint online site

Hi,
I am referring to the below blog for Upload/Download file to/from a document library in a SharePoint online site.
http://blogs.msdn.com/b/rohitpuri/archive/2007/04/10/upload-download-file-to-from-wss-document-library-using-dav.aspx?CommentPosted=true#commentmessage
I would like to know if this is feasible with a SharePoint online site.
If feasible, how can I resolve the below exception I am getting while using the code.
“The remote server returned an error: (403) Forbidden”.
Thanks,
Thanan

Hi,
Actually what I am trying to achieve is the two things.
1) By using only the user's name, need to upload/download from/to the document library of SharePoint online site using the CSOM. (i.e., achieving Single Sign On / Windows Authentication)
2) I need to achieve the above only by passing the document URL; not by hardcording/ configuring the document library name in the windows application.
Can anyone pls help on this now?
[Below code is working fine. But need to arrive the solution whereas the above 2 conditions are not violated.
using (var clientContext
= new ClientContext("https://yoursiteurl.com"))
           string passWd
= "password";
           SecureString securePassWd
= new SecureString();
           foreach
(var c in passWd.ToCharArray())
                securePassWd.AppendChar(c);
            clientContext.Credentials
= new SharePointOnlineCredentials("username", securePassWd);
           using
(var fs =
new FileStream("fileName",
FileMode.Open))
var fi =
new FileInfo("fileName");
var list = clientContext.Web.Lists.GetByTitle("Doc Library");
               clientContext.Load(list.RootFolder);
               clientContext.ExecuteQuery();
var fileUrl = String.Format("{0}/{1}", list.RootFolder.ServerRelativeUrl,
fi.Name);
Microsoft.SharePoint.Client.File.SaveBinaryDirect(clientContext, fileUrl,
fs, true);
Thanks,
Thanann

File Upload/Download

Hi
When using the file upload/download functionality, APEX stores the uploaded object in a table by default. See: http://download-uk.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CJAHDJDA
Is there a way to specify that the file should NOT be stored in a table, but rather, be stored on the file system?. Example in a directory object location.
I intend to use the upload/download functionality to load csv files that will then be parsed as external tables.
Thanks
Kezie

Hi,
I modified the above procedure to point to my tables and trying to create the procedure in Apex database and am getting the following error:
Procedure:
CREATE OR REPLACE PROCEDURE write_blob_to_file
( p_docid IN NUMBER,
p_directory IN VARCHAR2,
p_filename IN VARCHAR2 DEFAULT NULL )
IS
l_file utl_file.file_type;
l_buffer RAW(32767);
l_amount BINARY_INTEGER := 32767;
l_position INTEGER := 1;
l_blob BLOB;
l_length INTEGER;
l_filename VARCHAR2(400);
BEGIN
SELECT BLOB_CONTENT, MPP_name
INTO l_blob, l_filename
FROM MPP_FILES
WHERE id = p_docid;
IF p_filename IS NOT NULL THEN
l_filename := p_filename;
END IF;
l_length := dbms_lob.getlength( l_blob );
l_file := utl_file.fopen( p_directory, l_filename, 'wb', 32767 );
WHILE l_position < l_length LOOP
dbms_lob.read( l_blob, l_amount, l_position, l_buffer );
utl_file.put_raw( l_file, l_buffer, TRUE );
l_position := l_position + l_amount;
END LOOP;
utl_file.fclose( l_file );
EXCEPTION
WHEN others THEN
IF utl_file.is_open( l_file ) THEN
utl_file.fclose( l_file );
END IF;
raise_application_error( -20001, SQLERRM );
END write_blob_to_file;
Error:
ERROR at line 6: PLS-00201: identifier 'UTL_FILE' must be declared
4. p_filename IN VARCHAR2 DEFAULT NULL )
5. IS
6. l_file utl_file.file_type;
7. l_buffer RAW(32767);
8. l_amount BINARY_INTEGER := 32767;
Please let me know what am i missing. I am pretty new to PL/SQL and Apex.
Also wondering is there a way to download files from tables using Java Stored Procedure. Please give some pointers.
Ramesh K

Form upload & download

Similar Messages

Maybe you are looking for