'Form View' Component in VC configuration for From & To date

Hi Experts,
In VC
I am struggling to fix this from Morning,But can able...
My requirment is to develop a Barchart which is based on a BW Query....
The input variable for the query is From/To date..
So user enters From and to date and wants to analyze chart for that date.
For that reason..
I draged 'Form View' object in VC but can't able to format with From and To date
Please advise

Hi
Thanks for the update
Why do i need to use data service...i am using the input form view..directly
User will input Dates (To & From) and that dates has to be passed to BW Query and resluts should be displayed in bar chart
Thansk

Similar Messages

  • I'm in the military. Is Mac compatible with Lotus Forms viewer, Silanis ApproveIT and Activeclient for CAC?

    I'm in the military and I'm thinking about buying a Mac. I will need to install a CAC reader, Lotus Forms viewer, Silanis ApproveIT and ActiveClient. Can this be done and is it relatively painless to do?

    IBM made some software to view those forms on a Mac, but I don't know if it still exists. It was quite flakey, also. edit: Sounds like from militarycac.com that it no longer exists.
    See MilitaryCAC.com, specifically the Lion page, for info on using a CAC with the MAC. You need to purchase a compatible card reader, which they discuss there.
    It seems the easiest method is to use Thursby's PKard for Mac ($30 at www.thursby.com), but there are free alternatives. ActiveClient is not used at all. It is Windows only.

  • Component and application configuration for RPLM_QIMT_NOTIF_MAIN_COMP

    Hi folks,
    I've been enhancing a used component RPLM_QIMT_NOTIF_COMP as part of RPLM_QIMT_NOTIF_MAIN_COMP and I now need to configure the display output for a new application, but it doesn't work??
    I have configured components and used components of a completely bespoke application and all works correctly, but when I configure the enhanced standard components RPLM_QIMT_NOTIF_MAIN_COMP & RPLM_QIMT_NOTIF_COMP the changes don't take effect???
    Am I missing something? Is there something else I need to do to enable the configuration for standard (enhanced) webdynpro components?
    Many thanks,
    Drew

    Hi Drew,
    You have to explicitly load the component configuration using the following:
    data: l_personalization    type ref to if_wd_personalization,
            l_current_controller type ref to if_wd_controller,
      l_config type wdy_config_key.
      l_current_controller ?= wd_this->wd_get_api( ).
      l_personalization = l_current_controller->get_personalization_manager( ).
          l_config-config_id = 'ZCOMPCONF'.
          l_config-config_type = '00'.
          call method l_personalization->load_config_by_key
            exporting
              config_key            = l_config.
    Hopefully this will do the trick !

  • 871 Switchport Configuration for Phone and Data

    I am having a problem connecting my 7960 to a switchport of my
    871 (12.3(14) Advanced IP Services). When configured as shown, the phone is correctly placed into vlan 3, but
    a PC plugged into the phone does not end up into vlan 800, but rather vlan 1.
    interface FastEthernet1
    switchport access vlan 800
    switchport mode trunk
    switchport voice vlan 3
    switchport priority extend trust
    If I remove the switchport mode trunk, the phone ends up in VLAN 800.
    What is the proper configuration on this 871 to have the phone in vlan 3, and
    the PC plugged into the phone in vlan 800?
    Thanks.

    Hi,
    The only thing you need to change is to add the command "switchport trunk native vlan 800"
    The reason the PC is showing up in vlan 1 is because that is the default native vlan for the trunk, and thus is the only vlan that is untagged. Since the PC doesn't understand dot1q tagging, its DHCP requests will wind up being received in vlan1 on the switch. Once you change the native vlan to 800, the PC should correctly connect in vlan 800.
    HTH,
    Bobby

  • Configuration for MRP Eliment Data

    Dear Experts,
    For a particular material in Stock and Requirement Screen( MD04) its showing as :
    Date                            MRP element                        MRP Element Data
    11.12.2008                    SLocSt                                 1006 SLoc: not plnd
    What is the configuration please explain?
    Thnx
    Prosenjit.

    Hi Expert,
    In my PP-PI senerio, for a particelar material (HALB) in stock & requirements screen showing as :
    Date                 MRP element                       MRP element data
    11.12.2008        SLocSt                                1006 SLocSt  not plnd11.12.2008                                         
    SLocSt  not plnd Can anybody tell me please what is the configuration ?

  • Foriegn Trade and CIN configuration for SD

    Hi all,
      Can anybody please send me step by step procedures regarding
    1. Foriegn trade configuration in SD Module wrt India.
    2. CIN configuration in SD Module.
    Regards,
    Khan

    You require to do thenecessay configuration for Foreign Trade Data:
    IMG --> Sales and Distribution --> Foreign Trade/Customs --> Basic Data for Foreign Trade --> (Do the necessary configuration here)
    In most probability, it will not default, but it is required to be maintained in Invoice (based on configuration)
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Report Builder Wizard and Parameter Creation with values from other data source e.g. data set or views for non-IT users or Business Analysts

    Hi,
    "Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
    You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
    on TechNet. 
    I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
    Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
    I have SQL Server 2012 STD and Report Builder 3.0  and want to train non-technical users to create reports as per their need without asking to IT department.
    Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
    So how they can configure parameters based on Other data sets?
    Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
    a set of defined reports?
    I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
    So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know. 
    Many thanks and Kind Regards,
    For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323

    Hi Asam,
    If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
    query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
    http://msdn.microsoft.com/en-us/library/dd220464.aspx
    As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
    http://technet.microsoft.com/en-us/library/hh965699.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Data Guard configuration for RAC database disappeared from Grid control

    Primary Database Environment - Three node cluster
    RAC Database 10.2.0.1.0
    Linux Red Hat 4.0 2.6.9-22 64bit
    ASM 10.2.0.1.0
    Management Agent 10.2.0.2.0
    Standby Database Environment - one Node database
    Oracle Enterprise Edition 10.2.0.1.0 Single standby
    Linux Red Hat 4.0 2.6.9-22 64bit
    ASM 10.2.0.1.0
    Management Agent 10.2.0.2.0
    Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
    Oracle 10.1.0.1.0
    Grid Control 10.2.0.1.0
    Red Hat 4.0 2.6.9-22 32bit
    After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
    Initializing
    Connected to instance qdcls0427:ELCDV3
    Starting alert log monitor...
    Updating Data Guard link on database homepage...
    Data Protection Settings:
    Protection mode : Maximum Performance
    Log Transport Mode settings:
    ELCDV.qdx.com: ARCH
    ELXDV: ARCH
    Checking standby redo log files.....OK
    Checking Data Guard status
    ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
    ELXDV : Creation status unknown
    Checking Inconsistent Properties
    Checking agent status
    ELCDV.qdx.com
    qdcls0387.qdx.com ... OK
    qdcls0388.qdx.com ... OK
    qdcls0427.qdx.com ... OK
    ELXDV ... WARNING: No credentials available for target ELXDV
    Attempting agent ping ... OK
    Switching log file 672.Done
    WARNING: Skipping check for applied log on ELXDV : disabled
    Processing completed.
    Here are the steps followed to add the standby database in Grid Control
    Maintenance tab
    Setup and Manage Data Guard
    Logged in as sys
    Add standby database
    Create a new logical standby database
    Perform a live backup of the primary database
    Specify backup directory for staging area
    Specify standby database name and Oracle home location
    Specify file location staging area on standby node
    At the end am presented with a review of the selected options and then the standby database is created
    Has any body come across a similar issue?
    Thanks,

    Any resolution on this?
    I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
    Everything else seems to be working fine. Logs are being applied, etc.
    I can't figure out what credentials its looking for.

  • How to create bulk configuration files from a template for staging?

    Hello,
    We have created a sample configuration for ISRG2 2901 Router.  The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
    From searching we have found the following tools:
    1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
    2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
    3)  Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
    4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
    5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
    So our problem comes down to creating a template from a sample configuration, and creating bulk configuration files from the template. Is there a specific tool or procedure to achive this purpose?
    Thanks in Advance,
    Best Regards,

    Hi,
    Try this one http://www.gen-it.net
    Regards,
    Stuart

  • OAS WEB FORM 9.0.4 configuration for NLS_LENGTH_SEMANTICS=CHAR

    We have NO issue using Oracle Form(Developer 2000) with Oracle Application Server Configuration with UTF8 characterset. Everything is set correctly.
    As UTF8 is multi BYTE character set, we have to find a way Oracle Form can work with NLS_LENGTH_SEMANTICS=CHAR while inserting, updating etc upon datatype value. e.g. table a has a column b with VARCHAR2(400). We need to allow users to enter 400 character. We have database set up correctly to NLS_LENGTH_SEMANTICS=CHAR
    Oracle FORM DOES WORK if we go to individual field/column(for the table) on form field property and modify SEMANTICS value from DEFAULT to CHAR.
    Is there a way we can just modify default the OAS form level configuration for SEMANTICS to save time going to each form and modifying each filed to make it work?
    Thanks in advance!
    Nirali

    Thanks a lot for quick reply!
    We also have TAR open with Oracle. I think we just have to move on to manul affort. Thanks again!
    Nirali

  • Web Dynpro render configuration for Adobe Interactive Forms

    Hi,
    Is there any possibility to check rendering configuration for Web Dynpro application? I built web dynpro application which shows simple Adobe Interactive Form. In Sap Adobe LiveCycle Designer all buttons of Interactive Form are working (JavaScript) but in the form showed by web dynpro application in IE buttons have no action. Do You know what is the cause or where to search?

    Hi Pawel,
    The interface of the UI element InteractiveForm contains the method SET_LEGACY_EDITING_MODE, which in turn contains a Boolean parameter. The form is then ready for input
    method WDDOMODIFYVIEW.
    data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
    LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
    check first_time = abap_true.
    LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT(u2018INTERACTIVE_FORM_1u2019).
    LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
    LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
    endmethod.
    Regards,
    Runal

  • Controller for View, Window, Interface, and Configuration Cannot Be Created

    Hi All,
      In our  Web Dynpro ABAP applicaton we  have a window and when we edit the conent of window and try to press "Cancel" button we are getting below error.
    Controller for View, Window, Interface, and Configuration Cannot Be Created
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GET_CONTROLLER of program CL_WDR_COMPONENT==============CP
    Method: GET_ACTION_FROM_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================
    Do any one have idea regarding this error.
    Regards
    CB

    Hi,
    Sounds bit strange to me, if you edit your window and do not want to save your changes then i would not expect this error. assuming that the component does not have activation problem.
    Just for making sure.
    I assume that your problem is on design time and not runtime.
    If it is a design time and problem still exists, try to delete this window, save ,activate and then recreate this window,embed your view(s).
    If it is runtime problem then i would suggest you to do debugging and find out where it is getting this error.

  • Campaign - Need to provide 2 different View Configurations for same Role

    Hello,
    I need to provide for the same role config key 2 different view configurations for campaigns. Initially I wanted to do that with transaction types, but then I found out that there are no transaction types for campaigns.
    Does anyone know a way to do that? I don'T want to use a BADI for it, best would be a standard way.
    Thanks!

    You use Object Types to distinguish between views of same RoleConfigKey. In SPRO 'UI Framework Definition', you create object types and they would be available when you create a view config. Just select the object type as it forms part of the 'key' that idenitifies that particular view. In DO_CONFIG_DETERMINATION method of that view, you call a config based on this Object Type. So same view can produce two or more configs for same user in different scenarios.

  • Set a timeout for crystal sessions while using the Windows.Forms.Viewer?

    Hi,
    I am looking for a way to set the timeout for the crystal report sessions when using the Windows.Forms.Viewer in a .NET application. I guess that the default value is 20 minutes (like in the entperprise installations) but we cannot afford to keep many sessions open for that long. Is there a registry entry which can be set? Or even a way to do this programmatically?
    Thank you in advance,
    Stratos

    Hi David,
    we are talking here about a standalone .NET application where the reports are installed locally (like the application itself). We are not retrieving the reports from a server. The whole thing was developed using the crystal report viewer model probably because it was easier to do so. Is there a method in this model to tell the crystal runtime to do the clean-up work either for a report (like the ReportDocument.Close() ) or for the entire runtime instance. Dispose() does not seem to help us. If you say that there is no other way than redesign then we have to consider this option also.
    Cheers
    Stratos
    PS: What I was thinking of (as Plan B instead of using the ReportDocument object model) is to instantiate the crystal report viewer object in a separate process (.exe). Please note that we open a new crystal report viewer windows for each report, which is displayed. Closing the viewer window (ie. terminate the process) will at least then clean up and release the crystal DLLs and hopefully close the database connections. Or am I missing something here?
    Edited by: Efstratios Karaivazoglou on Jul 29, 2008 10:05 PM

  • Error while updating a custom Windows Azure Diagnostics configuration xml from powershell. "Invalid update to extension reference for role"

    I am attempting to upload a manually edited WADConfig xml to my VM. The WAD service is functioning correctly, I needed to add some custom WinEventLogs. The prescribed steps result in an error.
    What am I overlooking?
    I am following these instructions:
    Step 5: Remotely install Diagnostics on your Azure Virtual Machine
    azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/#virtual-machine
    $storage_name = "wadexamplevm"
    $key = "<StorageAccountKey>"
    $config_path="c:\users\<user>\documents\visual studio 2013\Projects\WadExampleVM\WadExampleVM\WadExample.xml"
    $service_name="wadexamplevm"
    $vm_name="WadExample"
    $storageContext = New-AzureStorageContext
    -StorageAccountName $storage_name -StorageAccountKey $key
    $VM1 = Get-AzureVM
    -ServiceName $service_name -Name $vm_name
    $VM2 = Set-AzureVMDiagnosticsExtension
    -DiagnosticsConfigurationPath $config_path
    -Version "1.*"
    -VM $VM1 -StorageContext $storageContext
    $VM3 = Update-AzureVM
    -ServiceName $service_name -Name $vm_name
    -VM $VM2.VM
    Unfortunately, I am receiving this error:
    Update-AzureVM : BadRequest: Invalid update to extension reference for role: XXXXXX and reference: IaaSDiagnostics.
    What's missing from the above script?

    Hi,
    Since Azure SDK 2.5 uses the extension model the diagnostics extension, the configuration and the connection string to the diagnostic storage are no longer part of the deployment package and cscfg. All the diagnostics configuration is contained within the
    wadcfgx. The advantage with this approach is that diagnostics agent and settings are decoupled from the project and can be dynamically enabled and updated even after your application is deployed. 
    Due to this change some existing workflows need to be rethought – instead of configuring the diagnostics as part of the application that gets deployed to each environment you can first deploy the application to the environment and then apply the diagnostics
    configuration for it.  When you publish the application from Visual Studio this process is done automatically for you. However if you were deploying your application outside of VS using PowerShell then you have to install the extension separately through
    PowerShell.
    There PowerShell cmdlets for managing the diagnostics extensions on a Cloud Service are -
    Set-AzureServiceDiagnosticsExtension
    Get-AzureServiceDiagnosticsExtension
    Remove-AzureServiceDiagnosticsExtension
    You can use the Set-AzureServiceDiagnosticsExtension method to enable diagnostics extension on a cloud service. One of the parameters on this cmdlet is the XML configuration file. This file is slightly different from the diagnostics.wadcfgx file. You can
    create this file from scratch by either following the article that you are referring to or  you can modify the wadcfgx file and pass in the modified file as a parameter to the powershell cmdlet.
    To modify the wadcfgx file –
    Make a copy the .wadcfgx.
    Remove the following elements from the Copy:
    <DiagnosticsConfiguration xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
       <PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
         <StorageAccount name=" " endpoint="https://core.windows.net/" />
       </PrivateConfig>
       <IsEnabled>false</IsEnabled>
    </DiagnosticsConfiguration>
    Make sure the top of the file still has xml version and encoding –
       <?xml version="1.0" encoding="utf-8"?>
    Effectively you are stripping down the Wadcfgx to only contain the <PublicConfig> section and the <?xml> header. You can then call the PowerShell cmdlet along with the appropriate parameters for the staging slots and roles:
    $storage_name = ‘
    <storagename>’
    $key= ‘<key>’
    $service_name = '<servicename>'
    $public_config = '<thepublicconfigfrom_diagnostics.wadcfgx>'
    $storageContext = New-AzureStorageContext –StorageAccountName $storage_name –StorageAccountKey $key
    Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config –ServiceName $service_name -Slot ‘Staging’ -Role ‘WebRole1’
    Hope this helps !
    Regards,
    Sowmya

Maybe you are looking for