Form6i cant write arabic charecter in the property pallete

although i set up the nls_lang to american_america.ar8mswin1256
form builder can't write arabic in the property pallete ot the item
but write only in the layout editor preciley
with bioler only
please help me to resolve this problem

Hi,
Please follow the solutions provided by Nothing123 to check the result.
If the issue persists, please recreate the discovery mailbox to check the result.
Here is an article for your reference.
Re-create Discovery and Other System Mailboxes in Exchange 2010
http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

I recently purchased this 21.5 inch iMac in the month of February. The woman that helped me through the process of purchasing this told me that it comes with the latest Mountain Lion. which it did, but i cant write a review in the app store! Help...

II recently purchased this 21.5 inch iMac in the month of February. The woman that helped me through the process of purchasing this told me that it comes with the latest Mountain Lion. which it did, but i cant write a review in the app store! Help...

You want to write a review about Mountain Lion? I'm not sure that you can write about the OS at the app store - it's not an app. Or are you talking about the online Apple store? If you want to send feedback to Apple, you could use this:
http://www.apple.com/feedback/macosx.html

My mac mini doesnt start. i cant write my password. the box dialogue doesnt apear.

my mac mini doesnt start. i cant write my password. the box dialogue doesnt apear.help me please!
nicolas

What does apear on the screen? You could start up in safe mode by holding down the shift key while starting up. You should then go to a login screen. Or you could hold down the R key, which should get you to the restore option. Then you could use the utilities to repair permissions and repair you boot volume.If you use the restore option, do not restore. go to the top and use the utilities option.

HT4623 i have updated to ios7 on my iphone 4s but the keybard has become extremely unresponsive and i cant write mails/texts/searched etc without a considerable delay in the text appearing. How can i reinstall ios7????

i have updated to ios7 on my iphone 4s but the keybard has become extremely unresponsive and i cant write mails/texts/searched etc without a considerable delay in the text appearing. How can i reinstall ios7????

litemotiv wrote:Nice entrance Bruce Lee JR, welcome!
Thanks~!! I usually like my presence to be known and not just sit in the dark I wanna become apart of the community~!! Actually, every activity I do, I like to get involved~!!
cybertorture wrote:
wow man, u really enjoy this ? ... well u ll see here many ppl like yr self who feels @ home here after a looooooong distro hopping
well be welcome here and long live ARCH !
LONG LIVE ARCH~!!!!! Hek yeah I enjoy, especially since I was a major power user of XP & strictly XP. There was everything I ever needed. The only thing was that, if there was an Open-Source alternative, I would take it. I didn't know much about Linux other than that it ran EXTREMELY well as a server just as FreeBSD does. Once I finally took the time to google Linux, read about ditributions,open source and read blogs and read community comments etc.. I was like" I gotta be apart of this~!!" because XP was the shizz. But now Linux, more specifically, ARCH~!!!!!

HT5312 Every time i try to buy something from the Itunes i cant because i most answer the security question but I don't remember my security question answer help plzzz, note: I can't call the apple support because I live in Saudi Arabi

Every time i try to buy something from the AppStore on my iPad or iPhone 4S i cant because i most answer the security question but I don't remember my security question answer, when I try to go change it from my Apple account he ask me the security questions agin and I don't know the answer help plzzz, note: I can't call the apple support because I live in Saudi Arabia

If you don't see the 'send reset info' button on the page where you can change them then I assume that you don't have a rescue email address (which is not the same thing as an alternate email address) set up on your account. As you won't be able to add one until you can answer 2 of your questions, you will need to contact iTunes Support or Apple to get the questions reset. You could try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security

Scheduled task powershell script cant write file

Hello experts
I have scheduled task with powershell but cant write CSV file. Below my PS script:
$ExemptGroup = Get-ADGroup app_users
Get-ADUser -Filter { -not (memberOf -RecursiveMatch $ExemptGroup.DistinguishedName) } -Properties * |
Select-Object -Property DisplayName,SamAccountName,WhenCreated,@{Name='Last Logon';Expression={[System.DateTime]::FromFileTime($_.LastLogon).ToString('g')}},LogonCount,@{N='Status';E={
If ( $_.useraccountControl -match '^(?:514|546|66050|66082)$' ) { 'Disabled' } Else { 'Enabled' } }} |
Sort-Object -Property DisplayName | Export-Csv C:\Users\22041912\Documents\User_statis_list.csv
In Powershell my script working normally and writing CSV file but in scheduled task cant write CSV file. Task history told me succesfully finished.
Anyone suggest? What wrong?

copy this on a batch file and point the task scheduler to the batch file.
PowerShell.exe -WindowStyle Hidden -File
E:\Shell\OdmaaGet-Aduser.ps1
check if it works..
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

MS Word for Mac has never supported Arabic. You have to use other apps. Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

I cant write a review in itunes store

Why suddenly i cant write any review on any app i downloaded?it says i need to download the app before i can make a review even if i downloaded the app over and over again, cant find any solution

You want to write a review about Mountain Lion? I'm not sure that you can write about the OS at the app store - it's not an app. Or are you talking about the online Apple store? If you want to send feedback to Apple, you could use this:
http://www.apple.com/feedback/macosx.html

How to get a Sum of rows, when i use the property max. rows p. page ?

Hi all.
I've got a query and get a lot of rows (amounts) back.
Now i want to have max. 21 rows per page.
So, first i used the property "max. rows p. page"=21.
But i want a have Sum-Field p.page too, which shows the sum of the amount p. page at a >fixed place (bottom, left) at the page.
this didnt work well....
Because when i have 30 rows, then the sum will shown at the second page (because the sum-field its after the repeating frame).
...Now i forgot the property and placed a function and two placeholder in the query like this:
Function:
:cp_row:=:cp_row +1;
if (mod (:cp_row,21)=0)) then :CP_pagenr:=:CP_pagenr+1;
Placeholders: cp_row, cp_pagenr
Now i want to use :CP_pagenr to change the group - but Report Builder says: I cant... because placeholder are not allowed to change a group.
So.. perhaps anyone can give me a hint how i can do this ?
Thanks a lot...

hello.
that sound to me as you wanted a running total. check out the metalink knwoledge base and search for running total and you will find a note on how to do that.
regards,
the oracle reports team --pw

Need a query based on the property value of the other itemDescriptor

Hi,
I have following structed repository(both items in repository) with itemDesc1 and itemDesc2. Now i have the value of prop2 (of itemDesc2 ) . Using this i want to write query (using QueryBuilder) to get the value for one of the property of itemDesc1.
<item-descriptor name="itemDesc1" >
      <table name="xx" type="auxiliary" id-column-name="id" >
         <property name="prop" column-name=xx" item-type="itemDesc2" />
     </table>
</item-descriptor>
<item-descriptor name="itemDesc2"   >
             <table name=yy" type="primary" id-column-name="id">
         <property name="prop1" column-name="xx" item-type="itemDesc2" />
          <property name="prop2" column-name="xx" item-type="itemDesc2" />
           <property name="prop3" column-name="xx" item-type="itemDesc2" />
     </table>
</item-descriptor>
Thanks in advance

Jack,
Simplest solution is probably a lookup table containing a list of positions and the salary level associated with each position:
The formula that retrieves the salaries from the rate table is shown above the Main table (left). Rate Table, to the right, contains the list of positions and the salary associated with each position.
Regards,
Barry

HOW to call at anytime the form6 "do you want to save the changes you have made"????

HOW to call at anytime in form6 "do you want to change the save you have made"????
It executes only if you use exit_forms
and I don t want to save with a commit_forms
without do appears this forms of form6
Thanks a lots for any answering
null

you have to write a trigger on key-clrfrm and key-next-record.
on that triggers you can call alert with 2 or 3 buttons.
I hope it will help.
Mustafa

Undefined charecters When I write arabic in a resource file

I have another problem in my resource bundle files, when I write arabic in my Dictionary_ar.proerties file, I save and close the file, but when I reopen it, all of my arabic writings turns to question marks,here is a line of code from the file:
Save =???
Is there any line of code which could be written in the resource file to maintain the Arabic language format, or to tell the Jdev that this file contains arabic characters.
best regards,
Ahmad Esbita

MS Office for Mac does not really support Arabic. But you may just have a font problem. Disconnected letters means a Windows font is being used. Change the font to a Mac font like Geeza Pro.
For better Arabic support, try OpenOffice.

I don't know how to use the property node to get information out of my sub vi while it is working.

I had a question answered earlier about passing information out of a sub vi, and was helped out. The problem is that I don't understand what is happening as I can not reproduce the results. I am now trying to take results of a comparison (true-false) and pass that back out of my sub vi. I tried a property node and to connect a refnum control to it in the sub vi. Then I tried to connect an indicator to its terminal in the main vi, but was unsuccessful can someone tell me how and why, step by step, to pass this information out. Starting with the point of information in the sub vi to the indicator in the vi. I would appreciate any help that you could give m
e.
Attachments:
Pass_a_Reference.vi ‏15 KB
GL_Flicker_mod.vi ‏77 KB

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

How can I write Arabic in Adobe illustrator CS4?

How can I write Arabic in Adobe illustrator CS4?

illustratorenter,
I am afraid you will need to have the MENA version to do so,

How can I can write Arabic in Adobe Illustrator CS6 ?

How can I can write Arabic in Adobe Illustrator CS ?
I use Adobe® Creative Suite® 6 Design & Web Premi
And I write Arabic in Adobe photshop CS6 but I can't write in Illustrator and indesign
PLZ help me .

Hi,
In Photoshop, Middle-east/North-african type (MENA) is enabled in all editions. In Illustrator and InDesign, you need the MENA-enabled editions of the software. Please use these links to download the trial and explore Arabic language support in Illustrator:
Illustrator: http://www.adobe.com/mena_ar/downloads/download-illustrator.html
Cheers,
David

Form6i cant write arabic charecter in the property pallete

Similar Messages

Maybe you are looking for