Formac TFT display suddenly not working help!!! G4 MDD DP1.25

Hi all...could use some pointers here. My formac 17" TFT display has suddenly stopped working on my MDD G4 DP1.25 - I use the standard graphics card. Turned the mac on today, and the display just wont turn on, though the silver light on the display flashes (as in standby) which means it's getting power. I also have a CRT display attached to the same card, and it's working as normal which I presume means that the graphics card is not dead. I tried booting from a different startup volume, same result. Any ideas please?? thanks!

no it doesn't support multiple inputs, it just has an on/off switch and is connected to the radeon 9000 pro graphics card (as shipped with the G4) via the ADC connector. Like I said, the VGA monitor that's hooked up to the same card works ok. And....weirder still, the Formac monitor has USB ports on the back, and although the monitor will no longer work (just the pulsing light on the front suggesting it's in stanbdy mode) the USB devices will still work when connected to the monitor - so this means either the card is half working or the monitor is half working!!! But I need to know which before I spend any $$$. Anyone got any ideas please? thanks!

Similar Messages

My TFT display suddenly stopped working HELP! G4 MDD DP1.25

Hi all...could use some pointers here. My formac 17" TFT display has suddenly stopped working on my MDD G4 DP1.25 - I use the standard graphics card. Turned the mac on today, and the display just wont turn on, though the silver light on the display flashes (as in standby) which means it's getting power. I also have a CRT display attached to the same card, and it's working as normal which I presume means that the graphics card is not dead. I tried booting from a different startup volume, same result. Any ideas please?? thanks!

no it doesn't support multiple inputs, it just has an on/off switch and is connected to the radeon 9000 pro graphics card (as shipped with the G4) via the ADC connector. Like I said, the VGA monitor that's hooked up to the same card works ok. And....weirder still, the Formac monitor has USB ports on the back, and although the monitor will no longer work (just the pulsing light on the front suggesting it's in stanbdy mode) the USB devices will still work when connected to the monitor - so this means either the card is half working or the monitor is half working!!! But I need to know which before I spend any $$$. Anyone got any ideas please? thanks!

Thunderbolt display suddenly not working

I have a brand new MBP (retina), purchased about 2 months ago. I also purhased a 27in thunderbolt display about 1 week ago. The display has been working fine until tonight. When i tried to wakup my laptop from sleep the thundebolt display didn't do anything. I re-plugged all the cables and still got nothing. Rebooted MBP, nothing... shutdown MBP, still nothing.
Removed all USB cables from display, pulled power cord from display, re-connected, still nothing.
Went through the guides on here about reseting PRAM, NVRAM and SMC. Done all that, and nothing.
Also did the delete the /com.apple.windowserver.plist file... nothing seems to work. I can still charge the laptop from the display, but plugging in the thunderbolt cable does nothing at all.
Pretty ****** off, this display is one week old and it suddenly dies?
I have another display (dell) which works fine from either thunderbolt port from the mac.
Any thoughts? Is it the MBP or the display?
Software on MBP is Maviricks 10.9.2

So i left the MBP shutdown and the display unplugged from power overnight.
Connected it up this morning and nothing happened... left it connected and after about 10 minutes the display magically came to life out of no where...
Seems a bit dodgy!

Screen suddenly not working, HELP!

I've had my PC for a couple of years now and its never really had a problem. But recently the screen would stop working and the computer would make strange beep noises. after turning it on and off a couple of times it would go back to norman and work perfectly, so i never really worried about it.
A few days ago the same thing happened but without the beeping. No matter how many times i restarted the screen wouldnt work, and i tried un-plugging everything and checked all the cables but still no change. Now im getting worried about it. I dont really know much about computers and i dont know any words about computers except the kepyboard and mouse, like really basic stuff. But i really need help to save this thing and i cant afford a new computer so please someone help it would be greatly appreciated! THANKYOU!!

Hello MovesLikeJaeger,
I understand that your computer will not boot.
Here is a link to a document that will tell you what the beep code is.
Let me know how everything goes.

IPad display suddenly not working properly.

iPad 1 is about 6 months old. All of a sudden, display is displaying colors incorrectly.
Everything is inverted or monochrome or something.
I have restarted and restored, to no avail. I have also verified the most current iPad and iTunes Software.
Any ideas short of shipping to Apple?
Wes

Wes,
Check Settings>General>Accessibility>White on Black>Off.

Help! My MacBook is all of a sudden not working. I can login to my account but as soon as I do that the screen goes completely white. I can change the volume and I have a mouse but that is it. I've tried safe starting my computer and that doesn't work.

Help! My MacBook is all of a sudden not working past the login page. A white screen comes up that I cannot get rid of. I attempted a safe start up and that failed as well. It's a white screen where I have a mouse and when I click the volume buttons I can hear it working but nothing else just white. Please help.

Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)

ITunes on my iPhone 5 is suddenly not working.

iTunes on my iPhone 5 is suddenly not working. Updated to IOS8.0 (not running 8.0.1) a few days go but was fine up until today. Now, when attempting to play a list of songs (artist, playlist or album) it rapidly shuffles through all of them without playing and then it displays a red square next to songs and won't play them at all. It seems to sync with my MBP but then new playlists I've created don't appear on the iPhone even though iTunes on the MBP has them appearing when I click the "on my iPhone tab. Tried the obvious quit and restart approach. No effect. Does anyone have any ideas?

It's not a hardware problem. The same exact thing just happened to me. My husband reset all settings, not erase all content and settings, after the phone started back up, everything worked like normal again. You just have to redo your settings.
General>Reset>Reset all settings
Hope this helps you!

Why does Acrobat suddenly not work on my Mac (won't open pdf files from a web page), yet I can open them from my iPhone? Everything worked fine yesteray.

Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.

Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

IChat video suddenly not working

Can anyone help? I'm using iChat 4.0.8 on an almost brand new MacBook Pro. The video worked perfectly fine with my parents, and then suddenly stopped working when we moved. We're still using a wireless connection with an airport extreme. Funny thing is, the video works fine with my husband's MacBook Pro, and my brother who is in California. Why would it suddenly not work with my parents when computers haven't changed?
please help!

Did the Modem change ?
10:49 PM Monday; October 19, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Apple TV suddenly not working

My Apple TV is suddenly not working. I have tried the trouble shooting suggestions of restarting, upgrading the system, checking everything etc, but to no avail. When I do a system test, all is ok, but I just cannot download /view my purchase - I get a constant 'ready in one minute' message with a wait symbol. There doesn't seem to be an issue with movies I have already purchased. I tried apple online support and a 'helpful support' person didn't respond to my query in 'under 2minutes' - or at all for that matter. Of course no problem with the billing - my account hash been charged for a movie I can't watch. All very frustrating! We have had Apple TV for over 18 months with no problems.

Welcome to the Apple community.
So is it just one movie.

AppleTv2: HDCP suddenly not working on netflix after update

I have had a working AppleTV2 for about a year and have been using netflix to stream movies. After most recent update I can no longer stream due to HDCP error. There are been no changes to the hardware (cables, TV, power, etc.) This can only point to the update. I tried to do a restore from Mac to the most recent update. I took it into the genius bar and they tried to do the same thing. No change, they only offer the $69 Service replacement. I have tried changing the outputs, the hdmi cable and powering up in a certain manner. None of these work? Why is this suddenly not working?
Thanks for any help.

Interesting (albeit, odd) addition to this issue --
on my work system (dual G5, decked out, 23" Cinema), the same issue started to happen after the QT upgrade... however in my situation, the movie would load, but then just sit there, frozen.
The first time I saw this, I started to move my mouse across the web page, and noticed that every time the pointer would roll over a URL link or any other rollover type of object within the browser window (e.g., a link or even a tab or bookmark shortcut in the Safari toolbar) the movie would suddenly start and stop, but just for a fraction of a second. But yet, if I just leave my mouse sitting on top of the URL or rollover object, it does nothing. It appears to be directly related to the action of roll-on or roll-out from other objects on the page, or within the overall window.
So basically, if I take my mouse and move it ridiculously fast back and forth over any one of these rollover items, the movie will play for a fraction of a second each time the pointer passes over the object and makes it highlight... something to the effect of watching a flip-book animation that stutters along.
Very bizarre -- not sure what happened with the update, but hoping that there is a patch released soon. It would appear that it's conflicting with other objects within the window, or it's waiting for some action on another rollover-type of item that is loaded within the overall window.
G4 Cube Mac OS X (10.4) Maxxed out.

Skype number is suddenly not working for me and my...

Skype number is suddenly not working for me and my colleagues to RECEIVE outside calls. Any ideas?
When I try to call my skype from my cell, it doesnt ring on either end. It appears connected on the cell phone since the counter clock for the call is increasing, but it doesnt ring or connect.
This is the same for me and at least 2 of my colleagues. It was working all day, till suddenly it did not.
When outside people call, it just gives us a missed call or voicemail email, but does not show a missed call on our skype.
When I call an outside number from skype, it connects.
Thanks for any help ASAP!

I think this might have been happening to me earlier. If you wait like 30 seconds when you called a machine said "All circuits are busy. da da da". I was looking for an answer and google only brought stuff from like 2010. It's working now after an hour or so.
Sucks cause I use skype for work and was desperate to find a quick reponse but couldn't.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

Formac TFT display suddenly not working help!!! G4 MDD DP1.25

Similar Messages

Maybe you are looking for