Formalities to be followed to block lost Blackberry . Urgent ! SOS

I have lost my Blackberry instrument today. I was able to make my sim inoperative by requesting service-provider Vodafone. My phone contains very imp data which should not fall into wrong hands. I had noted down the IMEI number of my instrument. Now, how do I get the phone inoperative using the EMEI number ? Who should I be approaching for this ? Will Blackberry do this for me ? Kindly help. I am distressed.
Solved!
Go to Solution.

Hello,
This thread contains all there is concerning your unfortunate situation:
http://supportforums.blackberry.com/t5/BlackBerry-Device-software/Lost-or-Stolen-BlackBerry-What-to-...
Given how important the data on your BB is, we can only hope that you were using a device lock password, for that will ensure that your data is indeed protected. If you did not use that, well...what can I say...good security capabilities can be provided, but it requires that the human actually use them in order to be effective.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to block lost lenovo A6000 mobile with IMEI

List out the procedures to be followed to block the lost LENOVO A600 with the help of IMEI?
IMEI 1:- XXXXXXXXXXXX
IMEI 2:- XXXXXXXXXXXX
Mobile No :- XXXXXXXX,XXXXXXXX
Moderator note: Personal information removed for member's protection.

Hi clicksteps
You can lock,factory reset or even locate(if location services are enabled)your phone using your Google account(the Google account you were using on your phone).Go to https://www.google.com/dashboard/ -> Sign in to your Google account(the one used on the phone)->go to Android/Manage active devices->from there you can ''Ring'',''Lock'',''Erase'',''Locate'' or ''Rename'' the device.
Unfortunately only the mobile service providers/operators can ''blacklist'' a certain IMEI number.
The IMEI number can also help local authorities(local police department) to track down your phone.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

My Q10 got Pin blocked by Blackberry !

Hello gúys,
First post here.
Last week my friend got a Q10 from local seller (we are in Vietnam) for around $750. After using it for 3 days, the Q10 got blocked by Blackberry. He got no access to the phone and the screen only showed a message: Device Pin Blocked.
He still can make and take some phone calls, but nothing rather than that. Any one got this issue yet? and any solutions available ? Your information will be highly appreciated. Thank you.
Quang
Solved!
Go to Solution.

Hey q3rista,
Welcome to the BlackBerry Support Community Forums.
If the PIN is blocked you will be able to send and receive SMS messages and make phone calls but there will be no data access.
For more information on why it was blocked, please contact your network service provider.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Gc cr block lost

Dear all
We hava an 10.2.0.4 RAC running on AIX 6.1, we found a lot “gc cr block lost” in awr report.
How to resolve this problem?
Event Waits Time (s) (ms) Time Wait Class
log file sync 171,333 288 2 66.1 Commit
log file parallel write 170,780 240 1 55.2 System I/O
CPU time 229 52.7
gc cr block lost 61 46 755 10.6 Cluster
db file parallel write 45,676 31 1 7.2 System I/O
flowing is result of netstat -s
#netstat -s
icmp:
     1501240 calls to icmp_error
     0 errors not generated because old message was icmp
     Output histogram:
          echo reply: 48022
          destination unreachable: 1478355
          echo: 3672830
     0 messages with bad code fields
     0 messages < minimum length
     0 bad checksums
     0 messages with bad length
     Input histogram:
          echo reply: 3671367
          destination unreachable: 1586471
          echo: 48049
     48022 message responses generated
igmp:
     0 messages received
     0 messages received with too few bytes
     0 messages received with bad checksum
     0 membership queries received
     0 membership queries received with invalid field(s)
     0 membership reports received
     0 membership reports received with invalid field(s)
     0 membership reports received for groups to which we belong
     8 membership reports sent
tcp:
     74915651 packets sent
          57060778 data packets (138705942737 bytes)
          33462 data packets (37970884 bytes) retransmitted
          5375289 ack-only packets (4239002 delayed)
          0 URG only packets
          5 window probe packets
          11436565 window update packets
          2019104 control packets
          5526504 large sends
          132996311078 bytes sent using largesend
          2085120 bytes is the biggest largesend
     107952244 packets received
          61900612 acks (for 138706680574 bytes)
          418658 duplicate acks
          0 acks for unsent data
          89624245 packets (70001950782 bytes) received in-sequence
          4743 completely duplicate packets (818002 bytes)
          0 old duplicate packets
          17 packets with some dup. data (4248 bytes duped)
          302994 out-of-order packets (30842613 bytes)
          32 packets (32 bytes) of data after window
          32 window probes
          286783 window update packets
          6552 packets received after close
          0 packets with bad hardware assisted checksum
          0 discarded for bad checksums
          0 discarded for bad header offset fields
          0 discarded because packet too short
          492 discarded by listeners
          0 discarded due to listener's queue full
          11878766 ack packet headers correctly predicted
          44728305 data packet headers correctly predicted
     322438 connection requests
     278463 connection accepts
     556834 connections established (including accepts)
     604193 connections closed (including 2346 drops)
     0 connections with ECN capability
     0 times responded to ECN
     36 embryonic connections dropped
     62169023 segments updated rtt (of 57866592 attempts)
     0 segments with congestion window reduced bit set
     0 segments with congestion experienced bit set
     0 resends due to path MTU discovery
     44036 path MTU discovery terminations due to retransmits
     156798 retransmit timeouts
          0 connections dropped by rexmit timeout
     9058 fast retransmits
          6049 when congestion window less than 4 segments
     5 newreno retransmits
     156 times avoided false fast retransmits
     0 persist timeouts
          0 connections dropped due to persist timeout
     2859 keepalive timeouts
          0 keepalive probes sent
          0 connections dropped by keepalive
     0 times SACK blocks array is extended
     0 times SACK holes array is extended
     0 packets dropped due to memory allocation failure
     1 connection in timewait reused
     0 delayed ACKs for SYN
     0 delayed ACKs for FIN
     0 send_and_disconnects
     0 spliced connections
     0 spliced connections closed
     0 spliced connections reset
     0 spliced connections timeout
     0 spliced connections persist timeout
     0 spliced connections keepalive timeout
     0 TCP checksum offload disabled during retransmit
     0 Connections dropped due to bad ACKs
     0 Connections dropped due to duplicate SYN packets
     0 fastpath loopback connections
     0 fastpath loopback sent packets (0 bytes)
     0 fastpath loopback received packets (0 bytes)
udp:
     147486199 datagrams received
     0 incomplete headers
     0 bad data length fields
     0 bad checksums
     1562482 dropped due to no socket
     5229040 broadcast/multicast datagrams dropped due to no socket
     0 socket buffer overflows
     140694677 delivered
     144251657 datagrams output
ip:
     272497723 total packets received
     0 bad header checksums
     0 with size smaller than minimum
     0 with data size < data length
     0 with header length < data size
     0 with data length < header length
     0 with bad options
     0 with incorrect version number
     14418667 fragments received
     0 fragments dropped (dup or out of space)
     254148 fragments dropped after timeout
     2750080 packets reassembled ok
     255570679 packets for this host
     5112394 packets for unknown/unsupported protocol
     0 packets forwarded
     23568 packets not forwardable
     0 redirects sent
     224311858 packets sent from this host
     0 packets sent with fabricated ip header
     0 output packets dropped due to no bufs, etc.
     0 output packets discarded due to no route
     4173773 output datagrams fragmented
     21581265 fragments created
     0 datagrams that can't be fragmented
     0 IP Multicast packets dropped due to no receiver
     0 successful path MTU discovery cycles
     0 path MTU rediscovery cycles attempted
     0 path MTU discovery no-response estimates
     0 path MTU discovery response timeouts
     0 path MTU discovery decreases detected
     0 path MTU discovery packets sent
     0 path MTU discovery memory allocation failures
     0 ipintrq overflows
     0 with illegal source
     0 packets processed by threads
     0 packets dropped by threads
     0 packets dropped due to the full socket receive buffer
     0 dead gateway detection packets sent
     0 dead gateway detection packet allocation failures
     0 dead gateway detection gateway allocation failures
     0 incoming packets dropped due to MLS filters
     0 packets not sent due to MLS filters
ipv6:
     122495 total packets received
     Input histogram:
          TCP: 14
          UDP: 61243
          ICMP v6: 61238
     0 with size smaller than minimum
     0 with data size < data length
     0 with incorrect version number
     0 with illegal source
     0 input packets without enough memory
     0 fragments received
     0 fragments dropped (dup or out of space)
     0 fragments dropped after timeout
     0 packets reassembled ok
     122495 packets for this host
     0 packets for unknown/unsupported protocol
     0 packets forwarded
     0 packets not forwardable
     0 too big packets not forwarded
     120071 packets sent from this host
     0 packets sent with fabricated ipv6 header
     0 output packets dropped due to no bufs
     0 output packets without enough memory
     7858 output packets discarded due to no route
     0 output datagrams fragmented
     0 fragments created
     0 packets dropped due to full socket receive buffer
     0 packets not delivered due to bad raw IPv6 checksum
     0 incoming packets dropped due to MLS filters
     0 packets not sent due to MLS filters
icmpv6:
     61242 calls to icmp6_error
     0 errors not generated because old message was icmpv6
     Output histogram:
          unreachable: 61238
          packets too big: 0
          time exceeded: 0
          parameter problems: 0
          redirects: 0
          echo requests: 0
          echo replies: 0
          group queries: 0
          group reports: 0
          group terminations: 0
          router solicitations: 0
          router advertisements: 0
          neighbor solicitations: 0
          neighbor advertisements: 0
     0 messages with bad code fields
     0 messages < minimum length
     0 bad checksums
     0 messages with bad length
     Input histogram:
          unreachable: 61238
          packets too big: 0
          time exceeded: 0
          parameter problems: 0
          echo requests: 0
          echo replies: 0
          group queries: 0
               bad group queries: 0
          group reports: 0
               bad group reports: 0
               our groups' reports: 0
          group terminations: 0
          bad group terminations: 0
          router solicitations: 0
          bad router solicitations: 0
          router advertisements: 0
          bad router advertisements: 0
          neighbor solicitations: 0
          bad neighbor solicitations: 0
          neighbor advertisements: 0
          bad neighbor advertisements: 0
          redirects: 0
          bad redirects: 0
          mobility calls when not started: 0
          home agent address discovery requests: 0
          bad home agent address discovery requests: 0
          bad home agent address discovery replys: 0
          bad home agent address discovery replys: 0
          prefix solicitations: 0
          bad prefix solicitations: 0
          prefix advertisements: 0
          bad prefix advertisements: 0
     0 message responses generated

Hi,
Troubleshooting gc block lost and Poor Network Performance in a RAC Environment (Doc ID 563566.1)
Regards
Sebastian

I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
You MAY get help at Contact Customer Care
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

How can i track a lost blackberry

pals, pls how do i track my lost blackberry phone. i haven't activated the blackberry protect. thanks

Hi and Welcome to the Community!
Please see this helpful thread:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/Lost-or-Stolen-BlackBerry-What...
Like insurance, the time to do something for this situation is BEFORE the need arises.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blocked by BlackBerry

Hi there
Since Monday I was blocked by BlackBerry after doing a transaction with a thirdparty Application (Total Conquest from Gameloft) - I can do transactions on my Q10 with the same card details and it is only on the Z10 that I am block to do transactions.
I did not receive an email from Blackberry that my account was suspended (such as with my bank account). Please unblock my account
Regards
George

Nobody here can do anything with your account. You'll have to contact your wireless service provider, and if necessary, have them escalate your case to BlackBerry.
That said, I'm not aware that BlackBerry blocks any transactions with anyone. It is likely your service provider.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Mac Flash Player Installer stalls at 25% or 30% followed by Connection Lost Start Over, which I do with same result.

Mac Flash Player Installer stalls at 25% or 30% followed by Connection Lost Start Over, which I do with same result.

This morning we resolved a problem that prevented Flash Player installations from completing for some of our Macintosh users.
If you encountered this problem, please delete any previously downloaded Flash Player installer and either:
1.) Download the installer again from https://get.adobe.com/flashplayer
2.) Download the stand-alone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

PL/SQL Block it is urgent please help

Hi,
Following is block to update the ticket symbol from globalindex to customer, for the matching customers, but the query is hanging.
declare
cursor set_tick_symbol is select column4,upper(column3) from
customer,globalindex where subscriber_id=1661 and upper(column3)=upper(cust_customer_name) and rownum<2;
ticker_symbol varchar2(20);
global_name varchar2(100);
begin
open set_tick_symbol;
loop
fetch set_tick_symbol into ticker_symbol,global_name;
exit when set_tick_symbol%NOTFOUND;
if set_tick_symbol%FOUND then
update customer set cust_ticker_symbol=ticker_symbol where subscriber_id=1661 and global_name=upper(cust_customer_name);
end if;
end loop;
close set_tick_symbol;
end;
can any one let me know what is the issue withis query?
Regards,
Chanda

Your enquiry isn't urgent, at least no more urgent than everyone else on here who wants help, so please do not be rude by suggesting that yours is more important in some manner.
There is nothing obviously wrong with your code from looking at it.
You don't need the if statement
if set_tick_symbol%FOUND thenbecause the preceding EXIT WHEN line will leave the loop if no data was found in the fetch.
If your query is "hanging" then you should run up enterprise manager and look in there to see if there any blocking statements or other reasons why your code is slow or stuck.

How to find a lost BlackBerry 10 smartphone using BlackBerry Protect

Posted originally on the Inside BlackBerry Help Blog
It’s a scenario no one wants to encounter but here’s a quick overview how you can help locate your BlackBerry 10 smartphone using BlackBerry Protect if you can’t find it.
Tip: Using a BlackBerry OS device? Check out this post for help locating your device using BlackBerry Protect.
Step 1 – Enable BlackBerry Protect and turn on Location Services
To locate your smartphone you must enable BlackBerry Protect and turn on Location Services.
After you turn on Location Services, your smartphone only sends its location information when you request it through the BlackBerry Protect website, or when your battery power is low.
Swipe down from the top of the screen
Tap  Settings > BlackBerry Protect
Set the BlackBerry Protect switch to On
Tap Location Services
Set the Location Services switch to On
Tap  Back to save your change
Step 2 – Log in to the BlackBerry Protect website
After you enable BlackBerry Protect and turn on Location Services, complete the following steps to view the location of your smartphone on a map.
Log in to the BlackBerry Protect website located at http://protect.blackberry.com
Click View Location
BlackBerry Protect will attempt to locate your smartphone
If your smartphone can be located, a map appears similar to the following showing the approximate location:
If you still can’t find your smartphone at the reported location, use the Play Sound option within the BlackBerry Protect website. This option makes your smartphone ring loudly for one minute as well as activating the Loud profile.
Help! BlackBerry Protect can’t locate my smartphone!
To locate your device it must be turned on and connected to the wireless network.
Because BlackBerry Protect also uses GPS, you may not locate your smartphone if it is inside a building, underground, or otherwise blocked from receiving a satellite signal.
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

TyW....... Great post...!

Can i block lost ipod touch

my son has had his ipod touch stolen at school i was wondering if there was any way of blocking it

What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
How To Set Up Free Find Your iPhone (Even on Unsupported Devices

Only require data back up from lost blackberry curve

hi..
i lost my blackberry curve 8520 yesterday and its protective appplication is not on.i know that i cant get it but only i want is my contacts.please help me as these is very much important.
Details of phone are:
blackberry curve 8520eta00108/2009/wrloimei no.<removed>
pin number:
<removed>
please do the needful
current contact number <removed>
EDIT: Personal Information such as PIN & Phone # is prohibited for your security. Please review User Guidelines under section "Be careful."

Hello sanskrit_singh
If you don't have a backup of your device or not using BlackBerry Protect and any email to sync your contacts then How and from Where you going to get your Device Data !
In this situation , I am sorry to say but your data are gone with your lost device.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

How do I transfer my data from my old LOST BlackBerry to my new one?

Hi everyone,
I hope someone could help me out...
I recently lost my blackberry pearl 8100 after car accident
( & thankfully I backed up my data the week before);
anyways now I wanted to know how I can transfer my data to my new blackberry curve? (without my old blackberry pearl...)
I keep reading about the switch wizard option; but since I don't have my old blackberry anymore (just my backed up data)... What can I do now?
can someone help me?
please and thanks

As posted before, if your data is in a PIM (e.g., Outlook) on your PC, then you can synch with that. Otherwise, you must use that backup file you created earlier. Here's a procedure:
KB10339 How to restore data from a backup file to a BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BSOD followed by a lost of 12gb HDD space

Hello,
I've encountered BSOD saying "IRQL_NOT_LESS_OR_EQUAL". Soon after restarting, I've noticed that I have a lost of 12GB hdd space.
This is not the first time. Last week I have another BSOD, which was related to my nvidia driver, and soon after restarting I had a lost of 10GB hdd space.
I did some research online and someone suggested that it might be due to the size of the dump file. I've check the dump file and it is only a mere 292KB!
Could anyone please let me know how to recover the 12GB lost of hdd space as well as solving the "IRQL_NOT_LESS_OR_EQUAL" problem?
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 2/13/2014 7:35:03 PM
Event ID: 10
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: IdeaPad-Y510P
Description:
Event filter with query "select * from __InstanceModificationEvent where targetinstance isa '__ArbitratorConfiguration'" could not be reactivated in namespace "//./root" because of error 0x80041033. Events cannot be delivered through
this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1EDEEE53-0AFE-4609-B846-D8C0B2075B1F}" />
<EventID>10</EventID>
<Version>2</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-02-13T08:35:03.209464600Z" />
<EventRecordID>1578</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="3536" />
<Channel>Application</Channel>
<Computer>IdeaPad-Y510P</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<data_0x8000003F xmlns="http://manifests.microsoft.com/win/2006/windows/WMI">
<Query>select * from __InstanceModificationEvent where targetinstance isa '__ArbitratorConfiguration'</Query>
<Namespace>//./root</Namespace>
<Error>0x80041033</Error>
</data_0x8000003F>
</UserData>
</Event>
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 2/13/2014 7:35:03 PM
Event ID: 24
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: IdeaPad-Y510P
Description:
Event provider $Core attempted to register query "select * from __TimerEvent" whose target class "__TimerEvent" in //./root/CIMV2 namespace does not exist. The query will be ignored.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1EDEEE53-0AFE-4609-B846-D8C0B2075B1F}" />
<EventID>24</EventID>
<Version>2</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-02-13T08:35:03.209464600Z" />
<EventRecordID>1577</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="2668" />
<Channel>Application</Channel>
<Computer>IdeaPad-Y510P</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<data_0x8000003F xmlns="http://manifests.microsoft.com/win/2006/windows/WMI">
<EventProvider>$Core</EventProvider>
<Query>select * from __TimerEvent</Query>
<Class>__TimerEvent</Class>
<Namespace>//./root/CIMV2</Namespace>
</data_0x8000003F>
</UserData>
</Event>
Texts in bold are the event log which I've copied out. There are 15 of event ID 24 and 1 event ID 10. Sorry if it's too messy.
Please let me know if you need my dump file or any other details.
Any kind of help would be much appreciated. Thanks.
Regards,
Xian Yang

These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved.
If you don't know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtesthere)
2-Driver verifier (for complete directions see our wiki here)
ALSO...
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
The work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Advice offered in good faith. It is your decision to implement same. Wanikiya and Dyami - Team ZigZag

Flip 8220, lost Blackberry PIN, only a 2 shows up on the options/status screen

Is there any solutions ?
After aprox 9 months working fine the phone suddenly lost its PIN, only shows up a 2 on the status screen. The internet and blackberry services by the wireless service provider are not anymore available (the services are active), the EDGE status is not in capital letters.
Can this be corrected to the original PIN number ?
Or is the phone just damaged ?
Thanks for any help

I have not heard of this. I've heard of the pin going to FFFFFFFF but never just to a 2. Have you tried removing the battery to reboot the device? If so, then I'm guessing the device is defective or has been disabled for some reason. Did you purchase the device new? If so, it should be covered under warranty if it's only 9 months old.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Formalities to be followed to block lost Blackberry . Urgent ! SOS

Similar Messages

Maybe you are looking for