FORMAT 64GB MICRO SDXC PROBLEM

I can't format  64GB micro sdxc  for window xp, i try windows update for exFAT,but still have problem,error message is windows was unable to complete the format.I try use windows 7 32bit or 64bit  to format still have problem.

TL;DR - skip to the last line. How stupid of me. I bought two SanDisk Mobile Ultra 64GB USH-I cards. I find SanDisk to be a very reputable brand - I haven't had any problems before with USB flash drives and other MicroSD cards. In fact, I've only ever used SanDisk MicroSDs. I have a 64MB (yes, megabytes), two 2GB, a 4GB, 8GB, 16GB and a 32GB MicroSD card, all of which perform very reliably. This streak was broken when I intended to purchase one for my phone and one for my tablet. Initially all was fine with the cards; they both mounted properly, were formatted using exFAT by default and showed a 59.46GB capacity. Misleadingly enough, SanDisk's 64GB "Mobile Ultra" MicroSDs don't actually work on any Android device. They only work on a select few, namely those with unlicensed exFAT support such as the Samsung Galaxy S3, Note 2, Note 10.1 and various others. Knowing exFAT doesn't work on either of my mobile devices, I then proceeded to format one of my cards to FAT32 so it would actually mount in my devices.  The first card died immediately when I inserted it into my Samsung Galaxy S2. My phone would say "Preparing SD Card...", then it would disappear very soon after. The card still showed up on my computer, so I tried to format again. Windows said that it was unable to complete the format. The card disconnects itself whenever I try to format it or copy files onto it. I have tried multiple readers, multiple computers and multiple OSes, all of them yielded the same "Automatic Unmount Syndrome". So, I sent this one for replacement. The second card I didn't risk formatting to FAT32. To my surprise, my second device, the ASUS Eee Pad Slider, could mount and read the 64GB exFAT card. I then copied about 30GB of data to it, all seems well. The card didn't disconnect itself, so I tried to copy more data onto it. But the second time I connected it to my computer, it suddenly switched to read-only mode. I couldn't rename, delete, move or copy any files on the card. So I had no choice but to format it again, but this time to NTFS. I could copy data to it, but it wasn't detected by my ASUS Slider. This is unexpected, because the Slider can mount 2.5" portable external hard drives formatted to NTFS. So I format it to FAT32, and copy the data once again. Luckily for me, the card didn't disconnect itself. My luck soon ran out when the card wasn't detected by my Slider (again), but this time it was much worse than my two previous attempts. I formatted the card to its default filesystem exFAT, but this time when I started copying my data, it disconnected itself in the same way my first card did. Formatting it will show the error "Windows was unable to complete the format". No third party formatting software could format it. That's the end of the road for both cards. So from personal experience: The SanDisk Mobile Ultra 64GB UHS-I MicroSD cards have a 100% failure rate within the first 5 file operations. Do not buy.

Similar Messages

  • Can the Droid Charge read/write 64GB micro-SDXC cards?

    Can the Droid Charge read/write 64GB micro-SDXC cards?
    (or any micro-SDXC card, for that matter)
    Thanks in advance!   

    Hi SandraW,
    Thanks WCMack for your posting. I have been able to verify that the Samsung Charge has an onboard memory of 2GBs and a capacity to carry a 32GB memory card. It cannot old a 64GB card. I hope this helps. 
    Thanks and have a great day!

  • Sandisk 64gb micro sdxc card works in 701

    Following on from user Roveel's post about his use of this sdxc card in the N8 I got one for my new 701. Once formatted to Fat32 in my pc (used the same utility that Roveel used) the card works in the phone. 
    The phone saves pictures to the card, views them, and also plays back music stored on the card fine. The only bug I can find is that the phone will not format the card, fails with an error message. Formatting the card reduces the capacity a little to 59gb but that is still better than my old 32gb card. See picture attached.
    Now running a 701, beautiful phone to handle and use...now that it has stopped sending my personal information to Nokia via 360Panel [rolls eyes]
    Attachments:
    25122011192.jpg ‏234 KB

    64 000 000 000 bytes isn't 64GB
    it was some fight some years ago... i believe than we shoud try fight back again becouse
    64 000 000 000 bytes is:
    64 000 000 000 / 1024 = 62 500 000 KB
    62 500 000 / 1024 = 61 035 MB
    61 035 / 1024 = 59.6 GB
    that is the reason of 59.4 GB
    i hope that explain
    but resuming it works
    and i like this news, at least for my N8
    waiting for my 808 PureVision (as soon sells begining)

  • Micro SDXC 64GB compatibility with Libretto W100?

    Hi, is a micro sdxc 64gb compatible with Libretto W100?
    Rgds.
    Message was edited by: massimod1d1

    Thanks.
    I already use a micro sdhc 16gb.
    I would like to exchange it for a bigger and I have to choose between a micro sdhc 32gb and a micro sdxc 64gb (if compatible).

  • My Sandisk Ultra Micro SDXC 64 GB stopped working properly

    I have a Sandisk Ultra Micro SDXC 64GB card which I use in my Samsung s4 phone for adding lots of music.  All has been working fine for 18 months or so.  I load / remove music onto it using Windows Explorer. Then as of this week I couldn't copy new music onto it, nor could I delete old stuff.  Or actually it seemed I could (it looked like all had been done fine, but then a few hours later it restored itself to its original state: with the old music still on, and not the new music).  I went through this quite a number of times coz I thought I was going crazy.  Anyway I finally realized I was not when playing a new song actually played one I had supposedly deleted.  So I realized the drive had got its directory file allocation tables screwed and probably needed to be reformatted. So I tried this using Windows.  However Quick Format failed, so I tried the full version.  Well after waiting 30 mins or so (grr) it finally said it cannot complete the formatting process ("windows was unable to compete the format").  So I downloaded SDFormatter to see if this would help.  But trying to format with that, I just got the error: "The Memory Card is write-protected. Please release the write protect switch".  But it is not, I set the write-protect on the card adaptor 10x to forward position.  So then I tried another card adaptor, but no luck here.  (I also tried this with another micro SD card on the same adaptor, but did not get this error) I thought then to try chkdsk /f h: from the command line, but I got the really useful statement:"The volume has been successfully checked, but Windows was unable to mark the volume as clean.Windows has checked the file system and found no problems." No viruses found either.  Has this card just died?  Or can I use some other method to reformat it?

    Hello, in that case the card seems to be write protected, in that case there is nothing you can do and the card needs to be replaced. So you can go to the place of purchase and replace the card or you can replace it directly through Sandisk under this link http://kb.sandisk.com/app/rmaform  

  • Z30 - Music & Neutron App do not see music files in micro SDXC card now and then

    I have my Z30 about a week now. So far so good. This morning, all of a sudden the native Music & Neutron App do not see the music files on the 64 GB micro SDXC card. The files are there when I checked with file management. I restarted a few times and the problem went away. I like to know if any one of you out there encountered this problem and how do you resolve it.
    Thanks.

    hi i had the same problem i asked an expert and told me the connection between card and phone was not good at the moment took it out and put it back didnt have a problem ever since

  • HT1657 I am a teacher and accidentally rented a movie twice. Once in HD and it told me I could not project it over my promethean board. So I rented it in the regular format and I had problems downloading it. Could I get a refund or at least a credit?

    I am a teacher and accidentally rented a movie twice. Once in HD and it told me I could not project it over my promethean board. So I rented it in the regular format and I had problems downloading it. Could I get a refund or at least a credit?

    You can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Fat16 Format With Micro SD Card

    I need to format a micro SD card from my Arduino micro sd reader to fat16.  I followed an online tutorial like so:
    diskutil list
    Which brought up this list:
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh 10.7 SSD      175.0 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                80.2 GB    disk0s4
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *750.2 GB   disk1
       1:                        EFI                         209.7 MB   disk1s1
       2:                  Apple_HFS WD 750GB Black HD       749.8 GB   disk1s2
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *7.8 GB     disk2
       1:                 DOS_FAT_32 NO NAME                 7.8 GB     disk2s1
    Then I typed:
    diskutil partitionDisk disk2 MBRFormat "MS-DOS FAT16" NO_NAME 7.8G
    Then it displays this:
    Started partitioning on disk2
    Unmounting disk
    Creating the partition map
    Waiting for the disks to reappear
    Formatting disk2s1 as MS-DOS (FAT16) with name NO_NAME
    Error: -69850: The chosen size is not valid for the chosen file system
    Although it shows up in Disk Utility as: disk2s1, should I take notice of the Error: -69850 or does it mean I've done it wrong?  Also I've tried different partition sizes and this error still comes up.
    P.s. I'm using Mac OS X Lion.
    Thanks in advance.

    Hmmm, FAT16 or FAT32? FAT16 is limited to 4 GB...
    http://support.microsoft.com/kb/310561

  • Zen Micro Firmware Problem.. HE

    hi.
    i just baugth recently the Creative Zen Micro 6G, about 2-3 monthes ago.
    two weeks ago the battery started making problems it wouldn't relode it self with any posible USB.
    after i tried again and again it suddenlly workd, but the device said "Firmware Problam" and it went straigth to "Recovery Mode" which has the next options:
    . Clean up
    2. Format All
    3. Relode Firmware
    4. Reboot
    i tried them all but nothing is making it relode the firmware even when the device is connected to the comp.
    it's like it's destroid and i cand install the drivers.
    can someone help?!

    To reload the firmware follow the advice here in the Zen FAQ at Nomadness.net.

  • Micro Zen - problem firmw

    Hello,
    I have tried to update my firmware with the new one, but in the middle of the procees a bug has appeared. The procees was blocked and I have restarted the device handly.
    Now when I connect it to my pc, Windows doesn't recognise him and the micro zen says " firmware problem" and goes directly on the recovery mode.... So I can't use it anymore..
    What can I do?

    Ok, I have tried to put the 2.0. firmware.
    Now when i want to start my micro zen, on the screen appears "Firmware problem" and it goes automatically on the Recovery mode or, I think what you are calling the rescue mode. I have tried all, format, clean and even Reload OS, but the problem when i want to put a new firmware, my pc says that there no micro zen connected, and the option "update" is not accesible...2 days it like that, I can't do anything with my micro zen, becaus i always stay on that menu...
    I think I'm going to bring it back to the shop.....
    It seems hat problem happen's very often with the update...

  • Creative Zen micro: "Firmware Problem&qu

    hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
    and it goes to the menu (think is called Recovery menu) and it shows:
    Creative Zen Micro V0.0.65
    1.Clean Up
    2.Format all
    3.Reload frimware
    4.Reboot
    now creative tells me to download a new firmware.
    i did.
    then to "RELOAD FIRMWARE"
    and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
    is there any way to fix this or is my zen busted?

    I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
    Remove all creative software and drivers from your P.C
    remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
    Downlaod the latest firmware for your player
    Re-boot/re start your P.C
    Go to the creative support website, and download the plays for sure software suite
    listed as:
    <i>. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 </i>
    install the software by clicking on it.
    RE-boot your P.C, with your player conected via USB
    once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
    Copnnect your player to its charger ( unless it charges via USB)
    On your player slect the reload OS option in the rescue menu
    When prompted by your player start the firmware update on your PC.
    <i>with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.</i>

  • Micro Card Problems

    For no apparent reason, neither my phone, nor my computer will recognize my micro-card. This is hightly annoying, since they have both been recognizing it llike crazy for a couple of years.
    Any hints as to what I can/needto do?

    This definitely is fixable &  important, Shop99er!
    Were you able to save the files to your computer & then format the card from your computer?
    That would be the next step in trying to determine why your computer reads the card but your phone won't.
    Did you get an error message when you put the SD card in the phone? How about when you tried to put the SD card in another phone? What we need to determine is whether or not the SD card or the phone is the problem.
    I look forward to hearing back from you if you are still having this issue. 

  • How do i get movies and t.v onto my iphone so i can watch them on the go? i have no idea, i cant even see a tab for videos im very confused. Also the purchased was made from itunes so i know its not a formatting wont be a problem.

    how do i watch movies and t.v shows off my iphone 3? i cannot find where my iphone stores the movies after being sync with my  itunes. Also formatting isnt a problem as they were purchased of itunes. 

    With the iPod app on your iPhone - Videos.

  • Creative Zen Micro 6GB/Problems with Power Switch and Firmw

    The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
    So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
    So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
    As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
    What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
    Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

    Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
    If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
    MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
    Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

  • Windows Vista vs Zen Micro: Software Problems

    Hey guys,
    Looking for a little help and this seems to be the right place to get, lots of helpful people!I have a 3 year old Zen Micro, 4/5Gb I think and it worked fine with my old Dell laptop which ran XP, I used to drag and drop mpg files easily with the bundled software, all was well. Back in January the Dell laptop reached the end of it's life and I layed my hands on a new Sony Vaio laptop, running the all singing, all dancing brand new shiney Windows Vista. For whatever reason, I had no need for the MP3 player for most of this this summer and now I've come to need it again and it obviously needs updating (all my music is 6 months out of date) and it seems I've lost the original software disc, bummer. So I downloaded the ZenCast Organiser & Sync software off the Creative site as it said it ran withVista and plug in the Micro and .........nothing.
    The Sync manager thing just says that there's no player attatched and it won't hook up. Am I missing something? Do I need another driver for it'sor something I've had a look through this site and all. I seem to be able to find is what I've already downloaded. Help!

    MiniMan64 wrote:
    ow stupid is this though! Why aren't Creative releasing any updates to allow older players to work on new machines?!
    Well they are releasing updates, the trouble is you need the old OS to apply them. I suspect there's technical reasons for updates not working on newer OS's. After all Creative couldn't anticipate Vista problems when making older devices (Vista wouldn't have been on hand to test at the time).
    BTW Firmware upgrades can be found here (UK version)
    or here. (US)
    Gift.

Maybe you are looking for