Format axis for time based on xml file

I am creating a graph with data that was pulled each minute.
I have a time entry in the xml file. When I use a categoryaxis it
creates the graph correctly, but how can I get it to only display
the time field every 30 minutes on the horizontal axis. Right now
the time is unreadable because it displays all of the time entries.
I still want each entry just not the time field.

The following link contains some source code on the subject:
http://www.inquiry.com/techtips/java_pro/10MinuteSolutions/Gabhart10min03/Gabhart10min03-3.asp

Similar Messages

I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.

For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.

To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC

Format Date for time.

i have a doubt as to how to store the date along with time from my front-end Forms Developer Suite 9i application.
I am trying to give this kind of statement from SQL-plus:-
update login_master set last_accessed=to_Char(sysdate,'dd-mon-yy HH:mi:ss')
where login_ID = :GLOBAL.LOGIN_ID
but, there is a message which comes like this:-
ORA-01830 date format picture ends before converting string.
Also, i want to compare this time stored against time a little later, say after 1 or 2 hrs to get number of minutes.
How can i do this? I hope, my question is clear. Please help in solving the doubt.
regards.

This topic is a duplicate of this one:
<p>Format Date for time
<p>Please reply on the other thread.

Trying to dynamically load CSS for project at compile time via config XML file to select CSS file.

I'm using the same code base to compile different versions of a project. Each project has different base fonts. I've created multiple css files that use the same style names. The idea being that in the code I reference the style names, then the loaded CSS determines which font (and size, color, etc) is used for each style name.
The CSS files are compiling to SWFs, and those SWFs are referenced in config.xml files. Before compiling, I select the config file to use.
I am loading the CSS SWF files via the StyleManager in the Application.mxml, like so:
styleManager.loadStyleDeclarations( _contentData.elements( 'cssPath' ).@path )
The path traces out correctly as:
assets_embed/styles/project2.swf
For some reasone I must include an fx:Style line in the Application.mxml file or no fonts are recognized. Example:
<fx:Style source="assets_embed/styles/project1.css"/>
If I reference the css for project one (as done above) then most, but not all, styles work. Some styles reference the fonts from the project 1 css, others properly use fonts from project 2 swf. If I point to the CSS for the project I'm compiling in the <fx:Style > tag then all fonts work, but that defeats the goal of using XML rather than code to identify the styles.
So, why do I need the fx:Style line if the css is being loaded via StyleManager?
Why is there "cross talk" between style definitions?
Is there a better way to select styles at compile time?

I read this quickly so I might have missed a detail. I think your describing an issue with recent Flex releases that is described in the fine print somewhere. If you don't have any fonts embedded in the main app and are only bringing in fonts embedded in CSS SWFs, you have to force-link the EmbeddedFontRegistry by adding something like this to the main app's script block.
import mx.core.EmbeddedFontRegistry; EmbeddedFontRegistry;
(Yes, "EmbeddedFontRegistry" is in there twice, once to define the fully qualified name, the other to create a class dependency to force the linking).

Is it possible to search for keywords in an XML file?

Hey all,
I'm currently searching for ways to count the number of pre-defined keywords in an XML file. An example would be trying to find how many times "war" is mentioned in a news networks RSS feed <title></title> and adding it to a variable.
I've found a few custom AS3 XML class files out there but nothing I've been able to adapt. I'm at the point of considering just taking the title of these news stories converting them all to strings and searching them that way...
I'd be grateful for any help
Thanks!

An XML element can have multiple attributes such as:
<title keyword="war" category="international">War Breaks Out in the Middle East!</title>
In the above example, the XML element <title> has 2 attributes named keyword and category.
So in my example I'm searching for the attribute named "keywords" within the element <newsItem>.
The XML document could be formatted something as the following:
============
<someNewsFeed>
     <items>
          <newsItem keyword="war" category="international" url="www.cnn.com/headline2010020111">War Breaks Out in the Middle East!</newsItem>
          <newsItem keyword="healthcare" category="politics" url="www.cnn.com/headline2010020321">Healthcare Bill Still Has Some Hurdles to Jump</newsItem>
          <newsItem keyword="lady gaga" category="entertainment" url="www.cnn.com/headline2010020981">Lady Gaga Has 360 Reach</newsItem>
     </items>
</someNewsFeed>
===========
So in my example, the if/else loop is looking through each XML node named <newsItem> and when it finds it, it then see if it has an attribute called "keyword" and if it does, it then looks to see if it contains the word "war". If it DOES, then it will do the proceeding actions.
===========
if (newsFeed.items.newsItem[q].attribute("keyword") == "war") {
          warKeywordCounter == warKeywordCounter+1; //increase your keyword counter
          trace("Current value of warKeywordCounter = "+ warKeywordCounter);
==========
I'm assuming you already know how to load external XML documents into flash.
I hope this helps.
Message was edited by: dchaparro
Corrected if/else code to include right parentheses.

Creating a PL/SQL table based on XML file.

I have created two procedures to try and achieve the problem at hand.
It retrieves and displays the record from a DBMS_OUTPUT.PUT_LINE prospective as indicated in (1&2), but I am having difficulty loading these values into a PL/SQL table from the package labeled as (3).
All code compiles. (1&2) work together, (3) works by itself but will not populate the table, and I get no errors.
1.The first being the one that retrieves the XML file and parses it.
CREATE OR REPLACE procedure xml_main is
P XMLPARSER.Parser;
DOC CLOB;
v_xmldoc xmldom.DOMDocument;
v_out CLOB;
BEGIN
P := xmlparser.newParser;
xmlparser.setValidationMode(p, FALSE);
DOC := '<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<com.welligent.Student.BasicStudent.Create>
<ControlAreaSync messageCategory="com.welligent.Student" messageObject="BasicStudent" messageAction="Create" messageRelease="1.0" messagePriority="1" messageType="Sync">
<Sender>
<MessageId>
<SenderAppId>com.openii.SyncRouter</SenderAppId>
<ProducerId>a72af712-90ea-43be-b958-077a87a29bfb</ProducerId>
<MessageSeq>53</MessageSeq>
</MessageId>
<Authentication>
<AuthUserId>Router</AuthUserId>
</Authentication>
</Sender>
<Datetime>
<Year>2001</Year>
<Month>3</Month>
<Day>23</Day>
<Hour>13</Hour>
<Minute>47</Minute>
<Second>30</Second>
<SubSecond>223</SubSecond>
<Timezone>6:00-GMT</Timezone>
</Datetime>
</ControlAreaSync>
<DataArea>
<NewData>
<BasicStudent mealCode="" usBorn="Yes" migrant="No" workAbility="No" ellStatus="">
<StudentNumber>052589F201</StudentNumber>
<ExternalIdNumber>1234567890</ExternalIdNumber>
<StateIdNumber>123456</StateIdNumber>
<Name>
<LastName>Lopez</LastName>
<FirstName>Maria</FirstName>
<MiddleName>S</MiddleName>
</Name>
<Gender>Female</Gender>
<BirthDate>
<Month>1</Month>
<Day>1</Day>
<Year>1995</Year>
</BirthDate>
<Race>Hispanic</Race>
<Ethnicity>Hispanic</Ethnicity>
<PrimaryLanguage>English</PrimaryLanguage>
<HouseholdLanguage>Spanish</HouseholdLanguage>
<Address>
<Street>123 Any Street</Street>
<ApartmentNumber>12-D</ApartmentNumber>
<City>Los Angeles</City>
<County>Los Angeles</County>
<State>CA</State>
<ZipCode>90071</ZipCode>
</Address>
</BasicStudent>
</NewData>
</DataArea>
</com.welligent.Student.BasicStudent.Create>';
--v_out := DOC;
SYS.XMLPARSER.PARSECLOB ( P, DOC );
v_xmldoc := SYS.XMLPARSER.getDocument(P);
--DBMS_LOB.createtemporary(v_out,FALSE,DBMS_LOB.SESSION);
--v_out := SYS.XMLPARSER.PARSECLOB ( P, DOC );
--SYS.XMLDOM.writetoCLOB(v_xmldoc, v_out);
--INSERT INTO TEST (TEST_COLUMN)
--VALUES(V_OUT);
--printElements(v_xmldoc);
printElementAttributes(v_xmldoc);
exception
when xmldom.INDEX_SIZE_ERR then
raise_application_error(-20120, 'Index Size error');
when xmldom.DOMSTRING_SIZE_ERR then
raise_application_error(-20120, 'String Size error');
when xmldom.HIERARCHY_REQUEST_ERR then
raise_application_error(-20120, 'Hierarchy request error');
when xmldom.WRONG_DOCUMENT_ERR then
raise_application_error(-20120, 'Wrong doc error');
when xmldom.INVALID_CHARACTER_ERR then
raise_application_error(-20120, 'Invalid Char error');
when xmldom.NO_DATA_ALLOWED_ERR then
raise_application_error(-20120, 'Nod data allowed error');
when xmldom.NO_MODIFICATION_ALLOWED_ERR then
raise_application_error(-20120, 'No mod allowed error');
when xmldom.NOT_FOUND_ERR then
raise_application_error(-20120, 'Not found error');
when xmldom.NOT_SUPPORTED_ERR then
raise_application_error(-20120, 'Not supported error');
when xmldom.INUSE_ATTRIBUTE_ERR then
raise_application_error(-20120, 'In use attr error');
END;
2. The second which displays the values from the .xml file I initialized above.
CREATE OR REPLACE procedure printElementAttributes(doc xmldom.DOMDocument) is
nl XMLDOM.DOMNODELIST;
len1           NUMBER;
len2 NUMBER;
n      XMLDOM.DOMNODE;
e      XMLDOM.DOMELEMENT;
nnm      XMLDOM.DOMNAMEDNODEMAP;
attrname VARCHAR2(100);
attrval VARCHAR2(100);
text_value VARCHAR2(100):=NULL;
n_child XMLDOM.DOMNODE;
BEGIN
-- get all elements
nl := XMLDOM.getElementsByTagName(doc, '*');
len1 := XMLDOM.getLength(nl);
-- loop through elements
FOR j in 0..len1-1 LOOP
n := XMLDOM.item(nl, j);
e := XMLDOM.makeElement(n);
DBMS_OUTPUT.PUT_LINE(xmldom.getTagName(e) || ':');
-- get all attributes of element
nnm := xmldom.getAttributes(n);
     n_child:=xmldom.getFirstChild(n);
text_value:=xmldom.getNodeValue(n_child);
dbms_output.put_line('val='||text_value);
IF (xmldom.isNull(nnm) = FALSE) THEN
len2 := xmldom.getLength(nnm);
          dbms_output.put_line('length='||len2);
-- loop through attributes
FOR i IN 0..len2-1 LOOP
n := xmldom.item(nnm, i);
attrname := xmldom.getNodeName(n);
attrval := xmldom.getNodeValue(n);
dbms_output.put(' ' || attrname || ' = ' || attrval);
END LOOP;
dbms_output.put_line('');
END IF;
END LOOP;
END printElementAttributes;
3. The package trying to insert into a PL/SQL table.
CREATE OR REPLACE PACKAGE BODY XMLSTUD2 AS
PROCEDURE STUDLOAD
IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
DOC CLOB;
v_out CLOB;
n2 XMLDOM.DOMNODELIST;
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
--l_sturec students%rowtype;
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
DOC := '<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<com.welligent.Student.BasicStudent.Create>
<ControlAreaSync messageCategory="com.welligent.Student" messageObject="BasicStudent" messageAction="Create" messageRelease="1.0" messagePriority="1" messageType="Sync">
<Sender>
<MessageId>
<SenderAppId>com.openii.SyncRouter</SenderAppId>
<ProducerId>a72af712-90ea-43be-b958-077a87a29bfb</ProducerId>
<MessageSeq>53</MessageSeq>
</MessageId>
<Authentication>
<AuthUserId>Router</AuthUserId>
</Authentication>
</Sender>
<Datetime>
<Year>2001</Year>
<Month>3</Month>
<Day>23</Day>
<Hour>13</Hour>
<Minute>47</Minute>
<Second>30</Second>
<SubSecond>223</SubSecond>
<Timezone>6:00-GMT</Timezone>
</Datetime>
</ControlAreaSync>
<DataArea>
<NewData>
<BasicStudent mealCode="" usBorn="Yes" migrant="No" workAbility="No" ellStatus="">
<StudentNumber>052589F201</StudentNumber>
<ExternalIdNumber>1234567890</ExternalIdNumber>
<StateIdNumber>123456</StateIdNumber>
<Name>
<LastName>Lopez</LastName>
<FirstName>Maria</FirstName>
<MiddleName>S</MiddleName>
</Name>
<Gender>Female</Gender>
<BirthDate>
<Month>1</Month>
<Day>1</Day>
<Year>1995</Year>
</BirthDate>
<Race>Hispanic</Race>
<Ethnicity>Hispanic</Ethnicity>
<PrimaryLanguage>English</PrimaryLanguage>
<HouseholdLanguage>Spanish</HouseholdLanguage>
<Address>
<Street>123 Any Street</Street>
<ApartmentNumber>12-D</ApartmentNumber>
<City>Los Angeles</City>
<County>Los Angeles</County>
<State>CA</State>
<ZipCode>90071</ZipCode>
</Address>
</BasicStudent>
</NewData>
</DataArea>
</com.welligent.Student.BasicStudent.Create>';
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address');
dbms_output.put_line( 'New Stud processed on '||to_char(sysdate, 'YYYY-MON-DD'));
-- Loop through the list and create a new record in a tble collection
-- for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
     --s_tab(s_tab.last).STUDENT_ID :=xslprocessor.valueOf(v_n,'StudentNumber');
     --s_tab(s_tab.last).SSN :=xslprocessor.valueOf(v_n,'ExternalIdNumber');
     --s_tab(s_tab.last).SHISID :=xslprocessor.valueOf(v_n,'StateIdNumber');
     s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'LastName');
     --dbms_output.put_line( s_tab(s_tab.last).STUDENT_LAST_NAME);
     s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'FirstName');
     --s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'MiddleName');
     --s_tab(s_tab.last).STUDENT_GENDER :=xslprocessor.valueOf(v_n,'Gender');
     --s_tab(s_tab.last).SHISID :=xslprocessor.valueOf(v_n,'Month');
     --s_tab(s_tab.last).SHISID :=xslprocessor.valueOf(v_n,'Day');
     --s_tab(s_tab.last).SHISID :=xslprocessor.valueOf(v_n,'Year');
     --s_tab(s_tab.last).STUDENT_RACE :=xslprocessor.valueOf(v_n,'Race');
     --s_tab(s_tab.last).STUDENT_ETHNIC :=xslprocessor.valueOf(v_n,'Ethnicity');
     --s_tab(s_tab.last).STUDENT_PRI_LANG :=xslprocessor.valueOf(v_n,'PrimaryLanguage');
     --s_tab(s_tab.last).STUDENT_SEC_LANG :=xslprocessor.valueOf(v_n,'HouseholdLanguage');
     --s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'Street');
     --s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'ApartmentNumber');
     --s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'City');
     --s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'County');
     --s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'State');
     --s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'ZipCode');
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
dbms_output.put_line( s_tab(s_tab.last).STUDENT_LAST_NAME);
INSERT INTO STUDENTS (
SHISID, SSN, DOE_SCHOOL_NUMBER,
PATIENT_TYPE, TEACHER, HOMEROOM,
STUDENT_LAST_NAME, STUDENT_FIRST_NAME, STUDENT_MI,
STUDENT_DOB, STUDENT_BIRTH_CERT, STUDENT_COMM,
STUDENT_MUSA, STUDENT_FAMSIZE, STUDENT_FAMINCOME,
STUDENT_UNINSURED, STUDENT_LUNCH, STUDENT_ZIP,
STUDENT_STATE, STUDENT_COUNTY, STUDENT_STREET,
STUDENT_APART_NO, STUDENT_PHONE, STUDENT_H2O_TYPE,
STUDENT_WASTE_TRT, STUDENT_HOME_SET, STUDENT_NONHOME_SET,
STUDENT_GENDER, STUDENT_RACE, STUDENT_ETHNIC,
STUDENT_PRI_LANG, STUDENT_SEC_LANG, STUDENT_ATRISK,
EMER_COND_MEMO, ASSIST_DEVICE_TYPE, SCHOOL_ENTER_AGE,
STUDENT_CURR_GRADE, S504_ELIG_DATE, S504_DEV_DATE,
S504_REV_DATE, STUDENT_504, STUDENT_IEP,
IEP_EXP_DATE, GRAD_CLASS, TYPE_DIPLOMA,
GRADE_RETAIN, LIT_PASS_TEST_MATH, LIT_PASS_DATE_MATH,
LIT_PASS_TEST_WRITE, LIT_PASS_DATE_WRITE, LIT_PASS_TEST_READ,
LIT_PASS_DATE_READ, SPEC_ED_ELIG, SPEC_ED_CODE,
TRANSPORT_CODE, TRANSPORT_NO, PRIME_HANDICAP,
PRIME_HANDICAP_PERCENT, PRIME_HANDI_MANAGER, FIRST_ADD_HANDI,
FIRST_ADD_HANDICAP_PERCENT, FIRST_ADD_HANDI_504, FIRST_ADD_HANDI_504_DATE,
SECOND_ADD_HANDI, SECOND_ADD_HANDICAP_PERCENT, MED_EXTERNAL_NAME,
INS_TYPE, INS_PRI, INS_NAME,
INS_MEDICAID_NO, ELIGDATE, INS_PRIV_INSURANCE,
INS_APPR_BILL, INS_APPR_DATE, INS_PARENT_APPR,
INS_POL_NAME, INS_POL_NO, INS_CARRIER_NO,
INS_CARRIER_NAME, INS_CARRIER_RELATE, INS_AFFECT_DATE,
INS_COPAY_OV, INS_COPAY_RX, INS_COPAY_AMBUL,
INS_COPAY_EMER, INS_COPAY_OUTPAT, STUDENT_INACTIVE,
PHYS_ID, ENCOUNTERNUM, USERID,
MODDATE, STUDENT_ID, S504_DISABILITY,
CHAPTER1, WELLNESS_ENROLL, SCHOOL_OF_RESIDENCE,
INITIAL_IEP_DATE, CALENDAR_TRACK, USA_BORN,
ALT_ID, FUTURE_SCHOOL, IEP_LAST_MEETING,
IEP_LAST_SETTING, IEP_LAST_REFER_EVAL, THIRD_ADD_HANDI,
LEP, GIFTED, IEP_EXIT_REASON,
CASE_MANAGER_ID, INTAKE_NOTES, CALLER_PHONE,
CALL_DATE, CALLER_RELATIONSHIP, CALLER_NAME,
BUSINESS_PHONE, FAX, EMAIL,
HIGHEST_EDUCATION, INTAKE_DATE, SERVICE_COORDINATOR,
DISCHARGE_DATE, DISCHARGE_REASON, DISCHARGE_NOTES,
INTAKE_BY, INTAKE_STATUS, IEP_LAST_SERVED_DATE,
IEP_APC_DATE, IEP_EXIT_DATE, ADDRESS2,
LEGAL_STATUS, RELIGION, EMPLOYMENT_STATUS,
TARG_POP_GROUP1, TARG_POP_GROUP2, MARITAL_STATUS,
THIRD_ADD_HANDI_PERCENT, LAST_INTERFACE_DATE, SERVICE_PLAN_TYPE,
CURRENT_JURISDICTION, FIPS, BIRTH_PLACE_JURISDICTION,
BIRTH_PLACE_HOSPITAL, BIRTH_PLACE_STATE, BIRTH_PLACE_COUNTRY,
OTHER_CLIENT_NAME, SIBLINGS_WITH_SERVICES, PERM_SHARE_INFORMATION,
PERM_VERIFY_INSURANCE, REFERRING_AGENCY, REFERRING_INDIVIDUAL,
AUTOMATIC_ELIGIBILITY, INTAKE_IEP_ID, FUTURE_SCHOOL2,
FUTURE_SCHOOL3, TRANSLATOR_NEEDED, TOTAL_CHILDREN_IN_HOME,
REFERRED_BY, FAMILY_ID, SCREENING_CONSENT_FLAG,
PICTURE_FILE, DUAL_ENROLLED, DOE_SCHOOL_NUMBER2)
VALUES (123456789012, null,null ,
null,null,null ,s_tab(stud).STUDENT_LAST_NAME
, s_tab(stud).STUDENT_LAST_NAME,null ,
null ,null ,null ,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null ,null , null,
null, null,null );
END LOOP;
COMMIT;
-- Free any resources associated with the document now it
-- is no longer needed.
xmldom.freeDocument(v_doc);
END STUDLOAD;
END XMLSTUD2;
/

Hi
I have created a PLSQL package based Oracle Portal
form. This is created a s a databse provider. I have
following questions to check :
1. How to capture return values from the package and
display different messages on success or failure ?
- http://download.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_portletbuilder.htm#BABBAFGI
Step 16
2. How to return to blank form by intializing already
entered values after successfuly process of the form
data.
- http://download.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_portletbuilder.htm#BABGBCHH
thanks
Manjith

Procedure for read/write an XML-File using UCCX9

Hi Team!
Is there someone who can explain me the procedure of reading/writing an XML-File using Cisco UCCX Rel. 9.0?
In the last couple of days I did a lot of research on the partner community as well as reading the CRS-Editor-PDFs.
But I can’t find a solution.
There are some templates available but they all didn’t seem to work.
I have two xml-files, both uploaded to “Document Management\en_us\”.
The script itself is attached to this posting.
I build that my script according to a sample script I found in the community.
From my point of view I have configured my script exactly like the sample script.
But it still doesn’t work.
I am especially interested in where to store the the appropriate files.
I would be very happy if there is someone who can explain me, what’s wrong there.
Many thanks in advance.
Kind regards
Michael

I'm experiencing the same issue [reading XML causes errors that say things from "no such file" to some odd Java exception.] I'm able to use a template XML file and after authenticating a user, transform the template into a proper XML file and then successfully save it to the en_US Doc Repository with updated values.
However, no matter what I've tried or who I've asked, the READ on the XML file so that I can actually script something that does some routing based on the value of the XML file created in my first script? Ultra fail.
I've even worked with three separate TAC IPCC engineers who were able to reproduce the issue in their test environment, but they were unable to assist. Eventually, whe pressed, I received this response from the last IPCC engineer.:
"Hello Brad,
Yes I know what I provided you with is what you already have achieved and this missing step is precisely what you need: how to setup the script to check the status and value of this XML document and then decide routing according to the state. But unfortunately this is what I found internally. The other resources are the ones you already know: support forums, scripting guides. The other resource with suggest to customer looking for script assistance is the Cisco Account Manager of your company, they know where to get the resources for such issues. Then again as I mentioned before on our phone conversation TAC does not support scripting but certainly if I find something else on my side I will let you know for sure."
I would do ponderous cartwheels of joy if someone who has this working in version 9.x [9.0.2 specifically] could share the deep magic.

Begging for help with podcast xml file

Hey All,
I have a podcast on iTunes. I am hosting the xml file and podcast mp3s on a friends server so Im not using any service. Everything is working and Ive sucessfully added 4 podcasts so far, and it shows up correctly in iTunes on my PC.
However my podcasts do not showup correct in the iTunes store website, or on idevices. Meaning, I number my shows 001_"NAME" 002_"NAME" etc. Yet in the iTunes store they show up out of order. So my last show is not at the top its at the bottom, and they are all mixed up (like 002, 001, 004, 003 instead of 4,3,2,1) Also the publish date is the same on two of them (and not what i have in the xml file) and doesnt show up at all on the other two. I assume this is a problem with the xml file, yet I dont see any problems with it. But it seems odd that it all works correctly in the actual iTunes program. Ive tried different code, but im very much a noob at it, and everything i find online is from 5 - 10 years ago or wants you to host your podcasts with their site and I dont need that.
Here is the link to the show on the iTunes website so you can see what i mean: http://itunes.apple.com/us/podcast/your-reality-recap/id501295325
If anybody can, would you mind checking out the code in my xml file and letting me know if you see anything thats causing this issue?
I zipped the xml file and put it here: http://www.ericcurto.com/podcast/YRR.zip
I would be truly greatfuly for any help with this. Ive been trying to fix this for days and dont know what else to do.
Thanks!
Eric

Your feed is at http://www.ericcurto.com/podcast/YourRealityRecap.xml (please always post the feed URL, not its contents or a copy).
I don't see the issues you mention. The order in the Store and when subscribing is what I would expect:
The order in the Store depends on clicking the header to the column: the default is the first one. Some of the dates are a day out - this is quite commmon and is probably a time zone issue (it may be different where you are - I'm in the UK). I don't know why you are seeing a garbled order unless you've clicked on one of the other columns in the Store.

SPC charts for time-based data?

I'll try to be succinct in explaining what I'm trying to achieve.
We run batch processes, and at various points in the process we take samples and test them. The sample results should be increasing exponentially over the course of the batch. I have data from a lot of batches in x/y format - x is the duration of the batch and y is the sample result. It makes a very noisy but clearly exponentially increasing data set.
What I want is to calculate some control limits that will obviously have to be increasing over time as well. I want to be able to say that, for a current batch, a sample at X time does or does not fall within the expected historical range.
Is this even possible with xMII, either in the logic editor or the iSPC charts?
I'd like to make the same sort of chart for other time-based samples that have more complex trends over the duration of a batch, not simply exponential or linear.

Hi, Carrie.
Your application doesn't really sound like what I would call an "SPC" chart, but rather, more of a so-called "golden batch" chart. This type of visualization is used when a production activity should have an expected set of value(s) and/or a shape to a curve. You would then "overlay" actual values onto this curve to track actual vs. expected and perhaps to highlight deviations.
This can best be done by combining a multiple queries using BLS (one or more queries for the "limits" and expected values, one query for the actual values), and combining/merging them so that the charting engine (either a line/marker chart or an XY plot) sees them as coming from a single source.
With some creativity, you can even have the "outlier" points displayed in another color. The xMII application team can help you with setting this up - Jeremy may still have a chart template/transaction I put together a while back called "LimitChart", which could be used for your application.
Rick

Infoview never times out (web.xml files indicate a 20 minute timeout)

I currently am using Business Objects Enterprise XIR2 w/SP3. we have an apache front end load balanced between two web servers and we are using the tomcat connector to interface with the two app servers.
Right now InfoView does not timeout not matter how long you have it open (even after 24 hrs).
I've seen several articles that mention the web.xml file and the <session-timeout> tag which all of our current files list the timeout as 20 (minutes I assume)
the file that i believe sets the timeout for infoview is the located in desktoplaunch\WEB-INF\web.xml
does anyone know if there is anohter file that i'm missing or why the timeout is not occuring.
thanks
Adam

In addition to Lionel's comment, you might want to check whether the listener section of web.xml is uncommented. Specifically, change


to

<listener>
      <listener-class>com.businessobjects.sdk.ceutils.SessionCleanupListener</listener-class>
</listener>

Create controls dynamically based on XML file

Hi All,
I am very new to Flex environment. I am trying to integrate FLEX with ASP.net for better UI interfacing.
May I know if is it possible to draw fields (Text boxes, option buttons, etc) on the Flex dynamically using a XML file at runtime.
What my expectation is, if I have an XML file with the filed names and type, can the Flex draw them on the front end UI?
Please let me know your thoughts.
Naveen

Is there possible to have an portlet that can be enlarged?Yes. You can maximise a portlet
And is there possible if I have a .php file, and then I want to create a portlet based on that .php fileNot directly.
If you are going to run the PHP file in its own machine then you could use a browser or clipper portlet. If you want to run the PHP file on the JVM itself, I believe there are some commercial products that let you do this (then its equivalent to a JavaServlet). This could then be included by any dummy JSP and you could use a plain jsp portlet . however you wqould have to be careful how you generate links within the PHP file (because you'd have to mimic the way BEA tags behave) .
never tried this and if you have few PHP pages then you could probably rewrite to java.

Use external drive for Time Capsule backups AND file storage?

I have an external drive formatted by my MBP. I'm using it to store my iTunes music library and iPhoto pics. Can I use the drive for Time Capsule backups as well?

Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

What are the best tools for opening very large XML files and examining the tree and confirming they are valid?

I am generating some very large XML files (600,000+ lines, 50MB+ characters). I finally have them all being valid XML and valid UTF-8.
But the files are so large Safari and Chrome will often not open them. FireFox will though.
Instead of these browsers, I was wondering if there are there any other recommended apps for the Mac for opening and viewing the XML, getting an error message if they are not valid for some reason and examing the XML tree?
I opened the file in the default app for XML which is Xcode, but that is just like opening it in a plain text editor. You can't expand/collapse the XML tree like you can with a browser, and it doesn't report errors.
Thanks,
Doug

Hi Tom,
I had not seen that list. I'll look it over.
I'm also in touch with the developer of BBEdit (they are quite responsive) and they are willing to look at the file in question and see why it is not reporting UTF-8 errors while Chrome is.
For now I have all the invalid characters quashed and things are working. But it would be useful in the future.
By the by, some of those editors are quite pricey!
doug

Air plugin for dreamweaver breaks application.xml file

the air plugin for dreamweaver breaks the application.xml file when the version is changed from 2.0 to 2.7
How to fix this?

Hi Roberto,
I'm sorry I don't know the answer to this one, but I'll ask around. Have you checked out the dreamweaver forum?
Chris

Please explain steps for Time based reduction scenario

Hi,
I am done with the RFC connections.
The scenario I am going to work with is 'Time Based Reduction'.
Can somebody please explain the process step-by-step from here on.
Thanks,
Mohammed Tauseef Ahmed

hi,
thanks for the replies.
the step "Start Programs for Generation and Receiver Settingsu201D is taking very very long time for execution(the log shows that the process started on May20,and it is still going on).
Now till the execution of this step is completed,we cannot execute furthet steps.Is there a way that we can execute the other steps or do we have to wait for this step to be completed?
Secondly, on the suggestion to change the process settings, I was not able to make the changes in process settings. Can the somebody kindly explain step-by-step on how to change the process settings.
Thanks.
Mohammed Tauseef Ahmed

Format axis for time based on xml file

Similar Messages

Maybe you are looking for