"format" command doesn't work after installing Solaris 10 (5/4/06) Patch

After I installed the latest Solaris 10 patch, it doesn't allow me to format my other disks on the system.
Here is the error message:
[host1]# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2/sd@0,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2/sd@1,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
ld.so.1: format: fatal: relocation error: file /usr/sbin/format: symbol dm_get_slices: referenced symbol not found
Killed
[host1]#
If anyone knows how to fix this bug, please kindly reply.

You need to apply the patch: 122176

Similar Messages

  • My iPhoto doesn't work after installing lion?

    My Iphoto doesn't work after installing lion.
    it suggest that I have to instal iphoto again.
    where can I find this

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • Bash command doesn't work after update

    I just ran pacman -Syu as normal, but some got many errors like below:
    ( 3/11) upgrading binutils
    error: command failed to execute correctly
    and every package except kernel-headers got a error message like that. and then i found most of my bash command doesn't work any more, just like ls and vim. However, some others like pwd and cd still work correctly.
    Any one any ideal?
    Last edited by ranjiao (2009-11-12 13:26:01)

    ranjiao wrote:I removed /lib64 and make a soft link from /lib64 to /lib, as Matlab09 requires a /lib64 containing crt libs.
    is this the cause?
    Yes.
    I've done that before and got into the same problem when updating glibc, the lesson here, don't mess with the default directory structure.

  • Internal Microphone doesn't work (after installing Boot Camp 3.1)

    I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
    I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
    On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
    I note that ear plug (connector in the back of the iMac) doesn't work too.
    Somebody can help me in this case ?
    Regards
    JGFilho

    i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
    The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

  • Web Interface doesn't work after installing 11g

    A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
    Thanks in advance.

    jalvarito wrote:
    A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
    Thanks in advance.And the error message is . . . ????

  • Launchpad Gestures doesn't work after install Lion

    Hey people, I have this problem, after install Lion all gestures works properly, but Launchpad and Show desktop doesn't work even with the option in the Trackpad enabled.
    Anybody can help me please.
    Kind regards.

    Here are my best suggestions for your camera problem:
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, continue with the following.
    • Use Disk Utility to repair permissions and then
       download and apply the 10.7.2 Combo Update:
         http://support.apple.com/kb/DL1459
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    The Combo version of updates can sometimes correct
    strange problems like yours.
    For camera problems in web video, you may need to update to the current version of Flash: http://www.adobe.com/software/flash/about/
    If you need to update Flash, follow Adobe's instructions and uninstall your old Flash before installing the new one: http://kb2.adobe.com/cps/908/cpsid_90893.html

  • HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

    installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
    +Hello Charles,+
    +Thank you for contacting HP Total Care.+
    +I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
    +I appreciate for the opportunity to assist you.+
    +*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
    +I will be more than happy to assist you when you change the OS.+
    +For information on keeping your HP and Compaq products up and running, please visit our Web site+
    at:
    +http://www.hp.com/go/totalcare+
    Sincerely,
    Sentinaro
    +HP Total Care+
    +Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
    +For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
    +HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

    Help! I've spent hours researching this and can't find a solution...
    I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
    Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
    Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
    Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
    Very Respectfully,
    Bobby G.

  • External Combo Drive doesn't work after installing Snow Leopard

    This Mini was bought used with a defective combo drive. I purchased a "No-Brand" external Combo Drive (USB connected and powered) off eBay. Everything worked fine under Leopard. I used the external drive to install Snow leopard but could not eject the DVD at the completion of the installation process. I manually ejected the DVD and discovered the external drive now doesn't work with either DVD's or CD"s.
    Any ideas what the problem is?
    Ken

    Mark this up to "cockpit' trouble on my part. The external combo drive now works.

  • Camera app doesn't work after installing a new screen

    I have been fixing broken iPhone screens for quite some time now but have never come across something like this. After installing a new screen the camera app won't show the camera and the shutter never opens. I thought I didn't put one of the cables in right so I double checked and sure enough they were in good. I restored the phone and tried it again with no luck. I then switched out to another screen I found and the camera worked perfectly. This is so bizzarre to me but can anyone explain to me what is wrong? Or what has happened? I have never seen anything like this.

    I keep getting an error message of (0xE80000001)!
    Read here.   iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Why Mac Help doesn't work after installing Leopard?

    After installing Leopard Mac Help shows a untitled window and after few seconds it disappear.

    Actually no. I'm working on the same environment before installing Leopard. No firewall...but I'm working from China where a massive Great Firewall is controlled by the government. That case I shouldn't be the only one.
    Fernando

  • My microphone doesn't work after installing lion on iMac early 2009

    Hello,
    I've just installed LION and everthing seems to be OK except the microphone, it doesn't work on skype, imovie.
    I have an Imac early 2009.
    Will this bug be fixed in the next 10.7.1?
    Please if you can help me,
    Thanks

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • Index (search button) in finder and mail doesn't work after installing mountain lion, index doesn't work after installing mountain lion

    after I up grade to mountain lion search button in finder and mail doesn't work: when I search from something the result is "zero"
    How can I solve this problem? thank you

    Try:
    sudo mdutil -E /
    which rebuilds spotlight and search indexes on the volume.

  • Re: Portege R500: Contros button doesn't work after installing update

    After installing the most recent version of Toshiba's Value Added Package, the two buttons (toshiba assist and backlight on/off) do not work properly: they open instead a firefox browser window.
    I assume there is something to configure in the "optimisation" section of Toshiba Assist.
    When I open the program "Toshiba buttons functions" (sorry for the puny translation, in Spanish it's called: "Funciones de botones de Toshiba") all the entries are blank and I have to indicate the Url of the program supposed turning off my LCD's backlight...
    I have no clue where to find this executable.
    Can anybody help me?

    Thanks for the response.
    I hope I don't have to use such an extreme solution. Mainly because I *really* don't have time for restoring an OS. Furthermore, if I have to restore everything every time I update the computer: what is the point of updating?
    There must be a more subtle solution... don't you think?

  • My itunes doesn't work after installing lion 10.7. I even downloaded the updated version of itunes, does anyone know what to do?

    itunes doesn't work anymore

    My itunes was working fine until we try to connect a new ipod touch. It said I needed to update the itunes to 10.5 or higher. To do that I had to update my OS X  Lion also.. now it doesn work... grrrr. Please if you have the solution post. I am placing a call to apple support to see if they can help me. Also I was looking for alternative software in case I can't make it work. Do you have any recommendations? Thank you and I am sorry I cant be helpful yet.

  • IPhone doesn't work after installing upgrade

    Upgraded iPhone and now it doesn't work. I have a black screen with the apple logo and white line - that's all. It doesn't respond to even the power button.

    Try resetting the App Store and Clearing Cookies.
    Reset       Learned from Old Toad
    App Store support. There is troubleshooting and a contact link.
    Support
    Time Machine
    Inherit a Backup
    Inherit a Backup (2)

Maybe you are looking for

  • How can I re-associate my iPad from an unauthorized computer

    I have a friend's iPad, and we are going to transfer the photos from it to my computer before she sells it. I accidentally removed the association from her account (while signed into iTunes - her account), and now need to re-associate it. As I'm not

  • Dual monitor setup with Docking station and W500 on windows 8

    Hi there I have a w500 with ATI Radeon 3650 Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now. Any solutions out there? I don't care about catalyst control center, or w

  • HT1430 My iTunes Store on my iphone keeps on loading no other things. Any help??

    Recently I installed ios 7.0.4 everything worked good but when I opened iTunes Store it's keeps on loading no other things. I can't use the iTunes Store app anymore. Any help to fix will be awesome anyone got problem like it.

  • Query Error LIKE [ac]

    I Need to reserch a customer's name where his name is "Joco". I would Like to research the field's name with these options: "Joco" or "Joco" I Wrote this query but Oracle doesn't support: SELECT name from customer where name like 'Jo[ac]o' Can anyone

  • Multiple Mac accounts edit one numbers file

    Can two accounts(login) on the same Macbook access and edit the same Numbers file? If so, how? thanks