Format Failed error when trying to format a WD MyBook 1TB external

I have tried twice to format the drive with the same "Format Failed" error message. I know it was still formatting with 28 minutes remaining (of the 7 hour format job) the first time - the second time it ran over night. Both times, I formatted with Mac OS Extended (journaled), and selected to zero out the data.
The only difference between the two attempts was a message reporting the Mac lost connection with the drive (after the first attempt) - didn't see any such message this morning after the second attempt.
I set a couple partitions, and ran "Disk Verify".
"DIsk Verify" lists the things it has checked, and gives the following messages:
The volume Startup Backup appears to be OK.
The volume Time Machine appears to be OK.
Other than the "Format Failed" error message, the disk appears to be ok. The "Startup Backup" volume is 319.87 GB as I set, and the "Time Machine" volume is 611.64 GB
I am able to copy a file to both volumes.
So, is the "Format Failed" error message real, and the "Disk Verify" fails to see a problem because it is checking things like the Catalog file, and not each spot on the drive?
Are there any disk utilities that can test the whole drive?

As I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1

Similar Messages

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

MSI Fail error when trying to unininstall VMWare Player 7.

I downloaded the trial version of VMWare Workstation 11. When I do the install it tries to uninstall VMWare Player 7. The uninstall fails with the cryptic error message 'MSI Fail.'
I've found various articles about this around the web and even tried a few 'solutions' to no avail. Is there a sure fire way to uninstall the Player so I can try the Workstation?

I already found the link you posted and followed it but the player is still on my system so VMW still wants to uninstall it and I get the msi fail error. I also tried the manual removal and that didn't work. In fact I wound up breaking some non vmware stuff. Thank heaven for disk images.
Also, the article mentions the file VMware_Install_Cleaner.zip but I can't seem to find it. Is this something that might work to clear up the problem? Too bad I can't just reinstall the player but there is no option for that. I tried a repair but that was a no go too. Also tried deleting files from my Temp folder which some folks claim worked for them.
Also ran the MSI fixit program from MS and while it said it fixed some things about the Player I still couldn't install VMW.

"Call Fail" error when trying to make out calls.

Hi, I'm on iPhone 4S with iOS 6.1.3 . Recently I've been experiencing this problem of doing outgoing calls. It keeps on having this "CALL FAILED" error. Previously it sometimes came but went back normal after an hour and I thought It might be caused by my network carrier . But its been 4 days now. Do take note that Im still be able to receive all incoming calls, SMS, Apps Messaging as well internet surfing & others. Pls guys help me to resolve this issue. Tq.
P/S
My location = Malaysia
My ISP & cellular network carrier = Celcom

Hello zipinabag,
Thank you for all the information you provided regarding the issue you are experiencing when making a call on the iPhone. I recommend reviewing this tutorial:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thank you for using Apple Support Communities.
Best,
Sheila M.

Runtime error when trying to use "Discover" button to import externally managed dimensions in developer studio.

Hi all,
I get the following error when using "Discover" to import dimensions in endeca develoepr studio
This application has requested the Runtime to terminate it in an unusual way.
Has anyone else encountered this issue?

Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim

Error when trying to format my 22GB SSD

The SSD originally came partitioned into two volumes. One of them was about 8GB and I have no idea what it was originally used for. The other partition was about 14GB and was used by ExpressCache.
After formatting the primary partition on the other drive and reinstalling Windows 8.1, I decided to delete the two partitions on the SSD and to instead create a single 22GB partition to be used by ExpressCache.
ExpressCache was working perfectly until I enabled bitlocker.
Then the machine started playing up and I later learned that bitlocker was incompatible with ExpressCache. So rolled back the encryption on the main drive and uninstalled ExpressCache. Since I am not going to be able to use ExpressCache with bitlocker, I would now like to format the 22GB SSD with NTFS and assign it a drive letter.
This is where I have started running into problems.
Even though I do not have ExpressCache installed or running and I do not yet have bitlocker enabled, windows keeps failing when I try to format the drive.
I have tried to use a variety of tools to format the drive. All of them get stuck at 0%.
Tools I have tried include: diskpart, windows format, EaseUS partition manager and MiniTool Partition Wizard
Various tools I have tried report that the disk is healthy.
I have used diskpart to remove the partition and create a new primary one.
When I try to format the partition using diskpart, I get the message:
"DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information."
The event log reports the following warning as a result of attempting to format the drive:
Event ID: 129
Source: storahci
Message: Reset to device, \Device\RaidPort0, was issued.
Event ID: 153
Source: disk
Message: The IO operation at logical block address d8 for Disk 1 (PDO name: \Device\00000036) was retried.
Event ID: 129
Source: storahci
Message: Reset to device, \Device\RaidPort0, was issued.
(This last warning will appear four times - roughly 30 seconds apart)
Is this a driver issue?
I have tried installing the "Intel Rapid Storage Technology Driver" and then formatting the drive, but it still gets stuck at 0% (this time however it doesn't report any warning in the event log) so I have resorted back to the Standard SATA AHCI Controller
Does anybody have any suggestions for how I can get some use out of my 22GB SSD?
It is a Toshiba THNSNX024GMNT
Much appreciated!
Solved!
Go to Solution.

Check this forum out: http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X240-SSD-Cache-M-2/td-p/1361827/page/2
I had a co-worker subscribed to the feed and had someone actually locate the SSD drive...We took it off and we are starting to image as normal now....HAPPINESS once again!

Hi, I have a mid 2010 13" MacBook Pro and I keep getting a POSIX error when trying to format my new harddrive. Help?

Hi guys, one day I turned my MacBook Pro on and it was frozen at the login screen, so I did a hard shutdown and restarted it just to get a blank white screen that didn't change. So I took it to the apple store for a genius appointment and they diagnosed the problem as a failed hard drive. So I got a new hard drive and bought snow leopard installation disc since I didn't have my original installation anymore and installed the new harddrive. I go to disc utility to erase it and create a new partition on it so the Mac will recognize it as a viable option to install snow leopard on, and I get a POSIX error that says: "the operation could not be completed. Cannot allocate memory."
So I call Apple and I'm told that it could very possible be the hard drive cable which is failing me here and not allowing the connection to the HDD. So I ordered the appropriate one on Amazon for my make and model (can be found here: http://www.amazon.com/gp/aw/d/B004VSZCL4/ref=ya_aw_oh_pit)
A lot of the reviews say a new one of these cables fixed their problems with the POSIX error, so I'm wondering what you guys think of this? And if you have any other ideas that could help out?
Any advice would be appreciated.
Thanks,
Zach

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

User Authentication Failed error when trying to display a JSP portlet

The steps carried out are as follows :
1. Created a JSP file named "c.jsp" and deployed it under 902_MidTier_Home\j2ee\home\default-web-app\examples\jsp
2. Created a table named USER_TABLE under Scott schema to store the usernames and passwords to validate this JSP application.
3. Registered this JSP as an external application with the following values :
Application Name           : RAGHU
Login URL          : http://hostname:port/j2ee/examples/jsp/c.jsp
User Name/ID Field Name     : username
Password Field Name     : password
Type of Authentication Used : POST
3. Clicked on the External Application and entered the username as USER1 and password as USER1 ( These values are available
under USER_TABLE for comparison ). Then it shows the message "Hi User1 .. Welcome message"
4. Now created a directory named JSPSAMPLE under "WEB-INF\Providers" and put the provider.xml file under this.
Created a raghu.properties file and placed it under "WEB-INF\deployment".
5. Now tested the testpage using the URL " http://hostname:port/jpdk/providers/raghu " and it works fine.
6. Registered this as a provider in Portal and added this portlet onto a page. Assigned this page to a newly created user.
It gives the message " Authentication Failed - Update Login Information " which is expected. I click on the link and
it takes me to the external application username password. I enter the credentials but this time it comes back again
to the page with the same message " Authentication Failed - Update Login Information ".
7. Basically the values are not passed to the Username and Password in jsp page which is why the problem occurs.
The JSP Code used is as follows :
<%@ page import="java.sql.*" %>
<HTML>
<HEAD><TITLE>DB Connectivity test</TITLE></HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER>
<B>user_table</B>
<BR><BR>
<%
String username = request.getParameter("username");
String password = request.getParameter("password");
Connection conn = null;
try
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection("jdbc:oracle:thin:@hostname:1521:iasdb","scott","tiger");
Statement stmt = conn.createStatement();
String query = "SELECT * FROM user_table where userid= '"+ username +"' and passwd = '" + password + "' " ;
ResultSet rs = stmt.executeQuery(query);
while(rs.next())
out.println("<TR>");
out.println(" <TD> hi " + rs.getString("userid") + ", welcome</TD>");
out.println("</TR>");
out.println("</TABLE>");
catch(SQLException e)
out.println("SQLException: " + e.getMessage() + "<BR>");
while((e = e.getNextException()) != null)
out.println(e.getMessage() + "<BR>");
out.println("invalid userid,password");
catch(ClassNotFoundException e)
out.println("ClassNotFoundException: " + e.getMessage() + "<BR>");
finally
//Clean up resources, close the connection.
if(conn != null)
try
conn.close();
catch (Exception ignored) {}
%>
</CENTER>
</BODY>
</HTML>
The Provider.xml file used is as follows :
<?xml version="1.0" encoding="UTF-8"?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
     <providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
     <session>true</session>
     <authentication class="oracle.portal.provider.v2.security.Authentication">
          <authType>ExternalApp</authType>
          <userFieldName>username</userFieldName>
          <userPwdName>password</userPwdName>
          <errorPageMessages>Raghu,Please sign in,Sign me up!</errorPageMessages>
     </authentication>
     <portlet class="oracle.portal.provider.v2.http.URLPortletDefinition">
          <id>1</id>
          <name>RaghuPortlet</name>
          <title>Raghu Mail Portlet</title>
          <description>This portlet is to test Integration services using mail.yahoo.com</description>
          <timeout>100</timeout>
          <timeoutMessage>Raghu timed out</timeoutMessage>
          <showEdit>false</showEdit>
          <showEditDefault>false</showEditDefault>
          <showPreview>false</showPreview>
          <showDetails>false</showDetails>
          <hasHelp>false</hasHelp>
          <hasAbout>false</hasAbout>
          <acceptContentType>text/html</acceptContentType>
          <registrationPortlet>false</registrationPortlet>
          <accessControl>public</accessControl>
          <renderer class="oracle.portal.provider.v2.render.RenderManager">
               <showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
                    <pageUrl>http://172.17.24.235:8888/c.jsp</pageUrl>
                    <contentType>text/html</contentType>
                    <filter class="oracle.portal.provider.v2.render.HtmlFilter">
                         <useAuthLinks>true</useAuthLinks>
                         <headerTrimTag><table width="100%" cellpadding=0 cellspacing=0 border=0><tr><td bgcolor=#9bbad6></headerTrimTag>
                         <footerTrimTag><table width="100%" cellpadding=2 cellspacing=1><tr><td bgcolor=#9bbad6></footerTrimTag>
                         <convertTarget>true</convertTarget>
                         <redirectUrlFieldName>.done</redirectUrlFieldName>
                    </filter>
               </showPage>
          </renderer>
          <securityManager class="oracle.portal.provider.v2.security.URLSecurityManager">
               <authorizType>registered</authorizType>
          </securityManager>
     </portlet>
</provider>
The Contents of raghu.properties file
serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/raghu/provider.xml
autoReload=true
Any inputs regarding why the values are passed properly in case of External Application but not so when registered as
a portlet in Portal.
Regards
Satish G

As I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1

Asset Selector initialization failed error when trying to create new site

Hi,
I'm trying to create a new site in using the Site Administration functionality in ATG 10, and I get the UI error 'Asset Selector initialization failed, after selecting to Create a new site. In the log, I have the following error:
2012-05-29 16:12:10,400 ERROR [nucleusNamespace.atg.remote.assetmanager.browse.service.BrowseService] (http-0.0.0.0-8180-2)
CAUGHT AT:
CONTAINER:atg.remote.assetmanager.browse.service.BrowseException; SOURCE:atg.repository.RepositoryException: No property named "null" could be found in the item descriptor "siteTemplate".
     at atg.remote.assetmanager.browse.service.RQLRetriever.retrieveItems(RQLRetriever.java:125)
     at atg.remote.assetmanager.browse.service.BrowseManager.getListMembers(BrowseManager.java:608)
     at atg.remote.assetmanager.browse.service.BrowseManager.getChildrenPage(BrowseManager.java:381)
     at atg.remote.assetmanager.browse.service.BrowseService.getChildren(BrowseService.java:583)
     at atg.remote.assetmanager.browse.service.BrowseService.getBrowseNavStateForContext(BrowseService.java:509)
     at atg.remote.assetmanager.browse.service.BrowseService.initialize(BrowseService.java:179)
     at atg.remote.assetmanager.browse.service.BrowseManager.getAssetNavigatorState(BrowseManager.java:1247)
     at atg.remote.assetmanager.browse.service.BrowseManager.getAssetNavigatorState(BrowseManager.java:81)
     at atg.remote.assetmanager.selector.service.AssetSelectorService.getAssetNavigatorState(AssetSelectorService.java:170)
     at atg.remote.assetmanager.selector.service.AssetSelectorService.loadAssetNavigatorStates(AssetSelectorService.java:222)
     at atg.remote.assetmanager.selector.service.AssetSelectorService.initializeAssetSelector(AssetSelectorService.java:355)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:421)
     at atg.flex.messaging.services.TransactionalJavaAdapter.invoke(TransactionalJavaAdapter.java:140)
     at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)
     at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1503)
     at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:884)
     at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:121)
     at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
     at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
     at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
     at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:146)
     at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:278)
     at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:322)
Caused by: atg.repository.RepositoryException: No property named "null" could be found in the item descriptor "siteTemplate".
     at atg.adapter.gsa.GSAItemDescriptor.executeSingleQuery(GSAItemDescriptor.java:8975)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:8846)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:7765)
     at atg.adapter.gsa.GSAView.executeUncachedQuery(GSAView.java:338)
     at atg.repository.query.QueryCache.executeUncachedQuery(QueryCache.java:693)
     at atg.repository.query.QueryCache.populateEntry(QueryCache.java:912)
     at atg.repository.query.QueryCache.executeCachedQuery(QueryCache.java:433)
     at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:344)
     at atg.adapter.gsa.GSAView.executeQuery(GSAView.java:285)
     at atg.remote.assetmanager.browse.service.RQLRetriever.retrieveItems(RQLRetriever.java:118)
     ... 112 more
SOURCE EXCEPTION:
atg.repository.RepositoryException: No property named "null" could be found in the item descriptor "siteTemplate".
     at atg.adapter.gsa.GSAItemDescriptor.executeSingleQuery(GSAItemDescriptor.java:8975)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:8846)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:7765)
     at atg.adapter.gsa.GSAView.executeUncachedQuery(GSAView.java:338)
     at atg.repository.query.QueryCache.executeUncachedQuery(QueryCache.java:693)
     at atg.repository.query.QueryCache.populateEntry(QueryCache.java:912)
     at atg.repository.query.QueryCache.executeCachedQuery(QueryCache.java:433)
     at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:344)
     at atg.adapter.gsa.GSAView.executeQuery(GSAView.java:285)
     at atg.remote.assetmanager.browse.service.RQLRetriever.retrieveItems(RQLRetriever.java:118)
Has anyone encountered this issue before?

Are you running both SiteAdmin and SiteAdmin.Versioned on your publishing server?
Also have you done any customization in SiteRepository?
Try getting merged XML for /atg/multisite/SiteRepository through Dyn Admin Component browser and make sure it comes up nicely for both production and publishing servers

"Package operation failed" error when trying to create ICAP file

Why is this happening? I create a new assignment and then select "Package for Incopy" and I get the error message "Package operation failed". What am I doing wrong? For draft 1 of my Mac Indesign CS5 file I created a new "assignment 1" and ICAP file and emailed to my PC Incopy CS4 client. They sent IDAP file back and all was well. I need to send draft 2 to client the same way but why am I unable to create a new ICAP file? I can't even replace the ICAP file from draft 1. Please help. Thank you! Lynn

Did you ever get it to work?
We are having the same problem.
Indesign CS4 on Mac
InCopy CS5 on PC
Though we also get an odd message when we reopen the InCopy doc, that there is another version created in 1999 which we might want to use.

Class activation failed Error when trying to activate the enhancement

Hi ,
Wheni try to activate the enhancement for the component BP_HEAD_SEARCH view SEARCHHELP
i get the following error message Class activation failed Message no. BL001
the error occurs in implementation class , as wizard is adding some junk code.
Is there other way to work on it .
Edited by: sowmya K on Dec 9, 2008 2:00 PM
Edited by: Lakshmi on Dec 10, 2008 9:14 AM

The method WD_CREATE_CONTEXT in your Z-class has two ENDMETHOD. lines, one before and one after the wizard-implementation "ztyped_context ?= context." Just delete the first ENDMETHOD. line and activate the class, should work fine.
Alternatively implement the note 1167357
Edited by: Philip Kopetzky on Jan 14, 2009 12:34 PM

I keep getting a "Build Fail" error when trying to load Photoshop. Other Adobe programs work just fine.

My error looks like this...
Mon Jan 5 12:56:58 2015
[INFO] AdobePackageBuilder - Build Version - 1.7.0.43
Mon Jan 5 12:56:58 2015
[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
Mon Jan 5 12:56:58 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/PackageTemplate/CS6/Template_Uninstall.bin /Applications/GKB/Build/GKB_Uninstall.pkg
Mon Jan 5 12:56:59 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/PackageTemplate/CS6/Template_Install.bin /Applications/GKB/Build/GKB_Install.pkg
Mon Jan 5 12:56:59 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/ASU/packages /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU2/packages
Mon Jan 5 12:56:59 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/ASU/Install.dylib /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU2/Install.dylib
Mon Jan 5 12:57:00 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /tmp/C38D2C56-1DA6-472B-B8C4-6FB284E7DA66/ACCCx2_8_1_451/Install.app /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU/Install.app
Mon Jan 5 12:57:01 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /tmp/C38D2C56-1DA6-472B-B8C4-6FB284E7DA66/ACCCx2_8_1_451/packages /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU/packages
Mon Jan 5 12:57:02 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /tmp/C38D2C56-1DA6-472B-B8C4-6FB284E7DA66/ACCCx2_8_1_451/resources /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU/resources
Mon Jan 5 12:57:02 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/Install.app /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/Install.ap p
Mon Jan 5 12:57:02 2015
[INFO] AdobePackageBuilder - Copied Setup file/folder (Install.app)
Mon Jan 5 12:57:02 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/packages /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/packages
Mon Jan 5 12:57:02 2015
[INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - Copied File (payloads/Media_db.db)
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - Copied File (payloads/Media_db.sig)
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - Copied File (payloads/setup.xml)
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - Registration is not suppressed, not removing Grwl package.
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - ASU at Path (/Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/Install.a pp) is not found. Skipping copying and renaming.
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-Support /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobePhotoshop15-Support
Mon Jan 5 12:57:03 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeCameraRaw8.0All /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeCameraRaw8.0All
Mon Jan 5 12:57:04 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-en_US /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobePhotoshop15-en_US
Mon Jan 5 12:57:04 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeCameraRawProfile8.0All /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeCameraRawProfile8.0All
Mon Jan 5 12:57:05 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorPhotoshop5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorPhotoshop5_0-mul
Mon Jan 5 12:57:05 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeAPE3.4-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeAPE3.4-mul
Mon Jan 5 12:57:05 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-Core /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobePhotoshop15-Core
Mon Jan 5 12:57:08 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorJA_ExtraSettings5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorJA_ExtraSettings5_0-mul
Mon Jan 5 12:57:08 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorNA_Recommended5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorNA_Recommended5_0-mul
Mon Jan 5 12:57:08 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorCommonSetCMYK5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorCommonSetCMYK5_0-mul
Mon Jan 5 12:57:08 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorCommonSetRGB5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorCommonSetRGB5_0-mul
Mon Jan 5 12:57:08 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeVideoProfilesCS5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeVideoProfilesCS5_0-mul
Mon Jan 5 12:57:09 2015
[INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorEU_ExtraSettings5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorEU_ExtraSettings5_0-mul
Mon Jan 5 12:57:09 2015
[ERROR] AdobePackageBuilder - Failed to find the dmg file path (null)
Mon Jan 5 12:57:09 2015
[ERROR] AdobePackageBuilder - Failed to package the update - null.

That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results.

Is anyone else getting a "connection failed" error when trying to download iOS 5.1?

I am trying to download iOS 5.1 and I get the same error on all of my devices: check network connection. Does anyone have a fix? I can access the Internet, download music, movies, and apps, and I am running iOS 5 but it will not let me download the update.

There must be something with loation, a lot of complaints since the release, but I downloaded and installed on an iPad in 12 minutes and an iPhone 4 in 6 minutes this afternoon on the East Coast of the US.

Pstatus fail error when trying to watch a movie an a streaming tv network app

why does a p status fail or other error message show up everytime i try to watch a movie

Thanks, I sent their support an e-mail about it as well, but have not heard back yet. I was wondering if anyone else was having this problem or is it limited to me.

Got an error when installing SocialMiner "An error occurred when trying to format sda6"

Hi,
I got an error "an error occurred when trying to format sda6", when trying to install SocialMiner 8.5.1 on VMWare. Then it stopped installing with blank screen.
Could anyone please let me know what is this error and what could be the resolution for this.
Thanks in advance.
Regards,
Sudheer

Bjornno11 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error.

Format Failed error when trying to format a WD MyBook 1TB external

Similar Messages

Maybe you are looking for